Database Users

Redmi 3 Pro Considerations - Flash global ROM with BOOTLOADER LOCKED

I've tried some things on my Xiaomi Redmi 3 Pro and I want to share them if helpful for someone.
I've done all this with Xiaomi.eu Rom and SMIUI
///// I'm not accountable for any problem on your phone, do it at your own risk! \\\\\​
1 - Button combinations (unplugged from pc):
vol+ & vol- & power = force shutdown if in fastboot or download mode, if powered-on it's a restart
vol- & power = from switched-off phone goes in fastboot (from there you can launch another combination: vol+&vol- while launche cmd: fastboot.exe reboot)
vol+ & power = preload\ bootload mode (the yellow screen where to choose recovery\ fastboot\ download mode)
2 - For any type of problem \brick \ bootloop be sure before about this:
A) if you run the phone in fastboot mode, check if you can see it in fastboot command line from pc (cmd: fastboot devices)
B) if you run the phone in download mode, check if you can see it from miflash
If these point are ok this means the pc is ready to see the phone if you softbrick it or it goes in bootloop.
You will be always able to run it in fastboot mode, then download mode, an flash any rom to the phone that works.
3 - What you need?
Install last version of MiFlash, here a guide: http://en.miui.com/thread-272376-1-1.html
Install MiPCSuite in english, here the link: http://pcsuite.mi.com/
If you have problems with ADB, install ADB drivers, here the link: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118 or http://forum.xda-developers.com/showthread.php?t=2317790
If you have problems with hs-usb qdloader 9008 driver, try to install from here: http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Download and upack Android.Image.Kitchen for Windows, from here: https://mega.nz/#!McAj2SZT!E4XS7II27BjkjSHS2vcBnE6Tgvl8IZBhCD2wEKBchpA
Download TWRP 3.0.2.0 for MiFlash: https://mega.nz/#!cF4VVQiY!zrq2DTQRBX3UHRPOXN1dDNWiTn5tnoPxUfrHF_Rsnq4
Download ROM from different links:
http://en.miui.com/a-234.html (miui china stock, BL Locked)
https://www.androidfilehost.com/?w=files&flid=36337 (Xiaomi.eu with Gapps, no Bloatware, BL unlocked)
http://smiui.net/kitchen.php(Xiaomi.eu + other stuff)
Install Notepad++
4 - Prepare ROM:
As suggested by the user Jack0190 there are ROMS where is not needed to mod this files, like for "Xiaomi redmi3 pro locked multilanguage" roms.
Searching on web you can find them quickly, just be aware that there are some roms that have problems with SIM recognize. This comes from an old Thai \ Indian MIUI.
I've seen first this thread on en.miui, http://en.miui.com/thread-276565-1-1.html , where explains how to modify ROM to change the bootloader check. The guide explains very good how to modify the "boot.img" file of roms.
So just follow those steps.
I've seen that you can do it for both types of rom, for Recovery and MiFlash too.
For the recovery ROM, you have a file to open in 7Zip, copy the "boot.img" from it, modify it as explained in the guide, and re-copy in the zip file again.
While for the one for Miflash, it's easier; extract the rom, copy the "boot.img" file from \image folder, modify it with, and change it in the original folder. Then flash it with Miflash.
5 - Connect phone in Fastboot with pc:
One thing that always will save you is the ability to connect phone in fastboot mode.
Before start the phone in fastboot mode with cable unplugged (point 1).
Once you've installed Miflash, go on it's directory folder (C:\Program Files\Xiaomi\MiPhone\), and run cmd from there (shift+right mouse click).
Connect phone to pc.
Then run command "fastboot.exe devices" and if the result under the line on left is a code, the phone is recognized
6 - Force Download Mode from fastboot:
To force the phone to go in dowload mode, first run it in fastboot (point 5), check if it's recognized (point 2-A), then type but don't run command "fastboot.exe reboot".
Now push vol+ & vol- in the same time, and now run the command.
If it runs in the right mode, you can see it's connected by device manager under "Ports (COM &LPT)" section.
You will see "qdloader 9008 driver" with a COM port installed. The same port you will see in Miflash if you run it and push the "refresh button".
7 - Flash Job:
A) First you need to flash the recovery, TWRP, and to do this you should already have done this things:
Install Miflash, MiPcSuit
Your phone is right seen in fastboot and in Miflash in download mode.
You have downloaded the right versione of TWRP for MiFlash.
B) Flash TWRP with Miflash
Select in Miflash the button "Browse" and go to the folder "\Image"where you have extracted the TWRP zip
Click "Refresh"
Click "Flash"
Wait to complete (If it fails sending hello packets, it's because it's too much time the phone is in download mode, in this case, switch it off, e restart in Download mode and re-do all )
C) Copy modified ROM:
Now, I've done this step by OTG connection but there are more ways to do it:
Connec and mount an USB Drive in OTG
Push it by ADB
Copy it by SD card
If the old ROM still works, copy it in MTP connection
if none of this options is available, flash the Rom with Miflash, flash again TWRP recovery, run recovery, wipe cache and dalvik (factory reset option under "Wipe") and try to run system, it should run last system flashed.
D) Flash modified rom by recovery
E) Restart in system (It could take long time, even 10 minutes, so just wait for it)
Thanks to all users\ people helped me with different guides from XDA and other forums.
I' m sorry for no image, but it's not an official guide.
If something is wrong I'll change it asap, but don't blame me, these are just advices.
If it's not enough clear, search it on web.
If there are grammar errors, the Image verification confirms "I'm not a robot"
If you don't find the answer, then it's 42.

After mod, i can flash rom update from recovery?
Inviato dal mio GT-I9505 utilizzando Tapatalk

Just wanted to say thank you - This guide works. I tried it with a new redmi 3 pro with locked bootloader. You can skip step 4 if you want to, because there are some prepared images available (search for "xiaomi redmi3 pro locked multilanguage" and you will find them).
Also to note: The first boot of the new system took some long time (~ 10-minutes), so don't get frustrated. As long as there's the android logo with the three dots wandering around, everything should work fine.
- Jack

RuLe89 said:
After mod, i can flash rom update from recovery?
Inviato dal mio GT-I9505 utilizzando Tapatalk
Click to expand...
Click to collapse
not sure about this, I've flashed the last version available, so i don't have updates for now to test.
But i think that it could overwrite files modified.
This is what in some guides tells.

Jack0190 said:
Just wanted to say thank you - This guide works. I tried it with a new redmi 3 pro with locked bootloader. You can skip step 4 if you want to, because there are some prepared images available (search for "xiaomi redmi3 pro locked multilanguage" and you will find them).
Also to note: The first boot of the new system took some long time (~ 10-minutes), so don't get frustrated. As long as there's the android logo with the three dots wandering around, everything should work fine.
- Jack
Click to expand...
Click to collapse
Thanks to you, I've updated with what told. I've tried some of ROMs for locked bootloader, but was an Indian \ Thai version, and I had issues with SIM, no recognize.
That's why it was needed for me to use other rom for unlocked bootloader.

Hi, thanks for the guide. It seems like it'd be the only decent I could come across for my problem.
The only thing is that everytime I try to flash any ROM/image through MiFlash, I get the error:
Code:
Error loading type libary/DLL.(0x80029c4a: wait port ready to use <time in seconds>)
So far I haven't found anything or anyone that could help me with this. Can any of you help me out here? That'd be much appreciated.
Thanks~
----------------------------------
::Edit::
Alright, turns out I just had to do this:
1. Uninstall the Qualcomm drivers
2. Reboot Windows into "test mode"/Disabled driver signature enforcement
3. Reinstall the Qualcomm drivers
4. Flash device (phone in download mode)
5. Be very pacient. Waiting through the phone's boot phase
(took about 10 minutes; if it takes more than 15 minutes, then something is probably wrong. Try to enter download mode and flash it again.)
6. Redmi 3 working again
Okay, so, this worked for me, it doesn't mean it'll necessarily work for you!
This was done with a locked bootloader and MiFlash 2015.10.28.0

[Guide] (2017.12.07update) How to root ur Mate9 oreo (emui 8.0)

First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
-----------------------2017.12.07 update---------------------------
sorry for so many needless steps of the old method.
root mate9 emui8 now only need 2 steps (so please neglect the old method).
new method:
1. reboot to fastboot mode . and fastboot flash recovery_ramdisk this
2. reboot to recovery mode. flash supersu 2.82 sr5 mod. (download link)
done!
ps: i have compared the "supersu 2.82 sr5 mod" to official supersu 2.82 sr5
the only different is:
the 683th line of file: "/META-INF/com/google/android/update-binary"
official package is : TRY="boot_a BOOT_A $TRY"
and the mod package is: TRY="ramdisk_a RAMDISK_A $TRY"
so the the mod package can be trusted i think.
that's all !
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
----------------------------------------------------------------
old method ( too many needless steps, please read the new method!):
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .

thanks very much!!!!!!

OP, How did u upgrade to oreo? I also have an AL00

Astra1 said:
OP, How did u upgrade to oreo? I also have an AL00
Click to expand...
Click to collapse
there are two posts told me how to update mate9 from nougat to oreo
1. https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
2. https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
notice:
a. the part of post 1 --"2.1 Method 1 using HWOTA Tool–" works on my mate9 Android N (emui 5.0) .
b. the part of post 2 --"Downgrade Nougat" works on my mate9, i succeed to downgrade to Nougat emui5.0 MHA-AL00C00B233.
c. the attachment of the post 1 seem to be designed to work on mate9 pro(because of the "LON") , so i modified the package to fit mate9. i don't know if it's neccessary.
i have wrote a guide，but it's in Chinese . 2rd floor (2#) of this post
Good Luck！

abbyvictor said:
First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
Click to expand...
Click to collapse
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app

Maheriraqi said:
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!

abbyvictor said:
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!
Click to expand...
Click to collapse
Thank you, but I need to files twrp and how to install on the oreo 8
Sent from my [device_name] using XDA-Developers Legacy app

Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!

AlemSalleh said:
Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!
Click to expand...
Click to collapse
It's my pleasure.
but i found this guide contains many redundant steps
i will simplify it later.....

viper4android for emui 8.0 ?

[No message]

hijibiji said:
viper4android for emui 8.0 ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2191223
no version for Oreo until now as i know

I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB

Flavio said:
I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB
Click to expand...
Click to collapse
/recovery has a new name "recovery_ramdisk" in mate9 oreo
if you want to flash stock recovery , you should execute " fastboot flash recovery_ramdisk xxxxxxxxxxxxx.img" in fastboot mode.
"RECOVERY_RAMDIS" may be refer to "recovery_ramdisk", so try to execute " fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img" in fastboot mode.
i'm not sure.
gook luck!

[guide] how to fix totally dead redmi note 4 | stuck in bootloop | qfil flashing

Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter (The above command does require your bootloader to be unlocked so kindly keep that in mind before passing the command)
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol ?
Reply if you face any problem
Peace!

addymishra said:
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol
Reply if you face any problem
Peace!
Click to expand...
Click to collapse
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg

sieg01 said:
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
Click to expand...
Click to collapse
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!

addymishra said:
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
Click to expand...
Click to collapse
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?

sieg01 said:
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
Click to expand...
Click to collapse
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best

addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool

sieg01 said:
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
Click to expand...
Click to collapse
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash

Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse

biits1993 said:
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
Click to expand...
Click to collapse
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!

addymishra said:
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
Click to expand...
Click to collapse
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots

addymishra said:
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Click to expand...
Click to collapse
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating

biits1993 said:
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
Click to expand...
Click to collapse
Strange :/ you can try miflash tool for that case. Download the lastest mi flash tool, enter into EDL mode using "fastboot oem edl" command then in mi flash drop down menu in left corner select "flash_factory.bat" and click flash. It will take around 400 seconds. Make sure you are in edl mode with red blinking light otherwise it will wipe your IMEI. Hope it works!

sieg01 said:
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
Click to expand...
Click to collapse
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/

addymishra said:
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
Click to expand...
Click to collapse
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg

sieg01 said:
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
Click to expand...
Click to collapse
Man, I think its some sort of hardware issue then. Or maybe your messed up your blobs or your partitions real bad and corrupted them. QFIL helped in my case. Got no more tips, maybe its time to visit service center brother One last shot you can give is to try flashing with QFIL first then with Mi Flash. That's last hope! All the best!

flash failed in QFIL please help

sohanaw said:
flash failed in QFIL please help
Click to expand...
Click to collapse
Which version of QFIL and which ROM are you flashing with? I managed to flash the said version in OP through QFIL without any error. However, other official versions like 9.xx fail to be flashed by QFIL

A solution that worked after all these troubles
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!

biits1993 said:
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
Click to expand...
Click to collapse
will try this tonight, thanks bhai

sohanaw said:
will try this tonight, thanks bhai
Click to expand...
Click to collapse
Let me know bro what happens, hope it works for you
I wanted to use RR rom though, but in the end no ROM worked for me except this one. So I'm just happy with it.

[Rom][9.0] Android One for MI CC9e ported from MI A3

Hey guys,
The Xiaomi Mi A3 (laurel_sprout) is exactly the Xiaomi Mi CC9e (laurus) with the only difference being the Mi CC9e runs MIUI while the Mi A3 runs on stock Android.
Thanks to Project Treble developed by Google, the two devices now have the ability of converting to each other. In previous versions of Android, devices that didn't support A/B updates could mount the system image under the /system directory. In Android Pie, the root of the system image is mounted as the root of the device.
Xiaomi Mi CC9e has been used the partition layout called "system-as-root" which means we could flash a A/B system image into it, while Xiaomi Mi A3 has been used typical A/B slot partition layout.
Now let's get rid of MIUI and experience stock Android One based on Android Pie.
Steps:
0. Make sure you have done the three things below.
Your device is Xiaomi Mi CC9e (laurus).
The bootloader of your devices has been unlocked.
The "Find My Phone" function has been disabled.
1. Flash China Developer Edition MIUI
No matter which version of MIUI your device is running, download the latest official China Developer Edition MIUI and update to it. This will update your device firmware.
Full-OTA Rom Download Link (China Developer Edition 20.1.16)
Download the zip file to /sdcard/Download folder, make sure you have already backup important data, make sure you have login MIUI account.
Open Settings-My Device-MIUI version, click the MIUI logo for 5 times, then click the icon in upper right corner, choose "Update from local rom" (or a similar description), locate to /sdcard/Download folder and choose your downloaded rom. The device will update automatically to China Developer Edition MIUI.
2. Flash TWRP Recovery
Download Android SDK Platform-Tools from official Google website or Google Drive. Extract to a folder that does not contain Chinese characters in the path.
Download TWRP Recovery for Xiaomi Mi CC9e from Google Drive, copy to the same folder as above.
Thanks to TWRP Developer: wzsx150
Fully shutdown your Xiaomi Mi CC9e and hold the power and volume - keys simultaneously until you see a fastboot logo on the screen, then connect your phone to the computer.
Open your Windows CMD or Windows Powershell or Linux Terminal or macOS Terminal, use cd command to locate to your extraction folder.
First, type the code below to detect your devices connected to the computer.
Code:
fastboot devices
Then, type the code below to flash TWRP Recovery to your Xiaomi Mi CC9e.
Code:
fastboot flash recovery TWRP_Recovery_for_laurus.img
Then, hold the volume + button and type the code below to reboot to recovery.
Code:
fastboot reboot
Maybe you will see the logo of TWRP Recovery twice, don't worry, just hold the volume + button until you see some blocks. Then click the block named "清除" (Clear) then "清除 Data 数据" (Clear Data), type "yes" and slide to clean your data partition.
Then, type the code below to reboot to recovery.
Code:
adb reboot recovery
3. Flash Xiaomi.eu Rom
You can change the language of the TWRP Recovery in the menu named "设置" (Settings) or you can just follow my steps if you don't understand Chinese.
You'd better download the same version of Xiaomi.eu Rom as the China Developer Edition MIUI you have flashed before.
Xiaomi.eu Developer Edition Rom Download Link
Example:
You have flashed China Developer Edition MIUI 20.1.16 in step 1, so you need to download the same version of Xiaomi.eu Rom from here.
Download the zip file to your computer, make sure you have already backup important data of your Xiaomi Mi CC9e.
Transfer the zip file to the phone, then click "安装" (Install) of the TWRP Recovery from the phone, find the zip file you just transferd and click it, silde to flash the Xiaomi.eu Rom.
Don't reboot or shutdown! Just continue.
4. Flash Xiaomi Mi A3 Official Rom
Download Payload_Dumper to the computer and extract to a folder that does not contain Chinese characters in the path.
Download the latest Xiaomi Mi A3 official rom to the computer, extract the payload.bin file to folder named "payload_input" of the extraction folder above.
Full-OTA Rom Download Link (Global Edition V10.3.13.0) (January 2020 Security Patch)
Run payload_dumper.exe until the command window close automatically, copy system.img from the folder named "payload_output" and transfer to the phone.
Click the button named "清除" (Clear) of the TWRP Recovery, just slide to clear data and cache partition, then click "安装" (Install) then "刷入 Image", choose the system.img you have just transfered, select the "System 镜像" (System Image) option, then slide to flash.
After flash system image, click the button named "清除" (Clear) of the TWRP Recovery, just slide to clear data and cache partition.
Don't reboot or shutdown! Just continue.
5. Flash Magisk
You HAVE TO flash Magisk to successfully boot.
Download Magisk V19.4 from official GitHub Release Page, transfer to the phone.
Click "安装" (Install) of the TWRP Recovery from the phone, find the zip file you just transferd and click it, silde to flash Magisk.
DON'T flash Magisk V20.x ! You won't boot successfully.
If you want, you can clear the cache and dalvik cache partition, but DON'T clear data partition after flashing Magisk.
6. Reboot to system
Enjoy your Android One!

Quite inspring. A good way to get newer security patch by flashing MIUI EU first.

thanks bro. yohuu. I got it

Can't see your tutorial code

The brushing was successful, but the minimum brightness is very bright. Glare. The video player cannot adjust the brightness.

HuiXiaQing-Liu said:
Can i convert our mi a3 to cc9e by doing this method???
Click to expand...
Click to collapse

Meraj018 said:
HuiXiaQing-Liu said:
Can i convert our mi a3 to cc9e by doing this method???
Click to expand...
Click to collapse
No
Click to expand...
Click to collapse

Can I change to the mi A3 android 10 recovery rom?

I was unable to update to china developer rom from my current china stable rom. so I u can see I failed in the step 1. Plz need help.

TWRP bootloop
Hello!
First of all, thanks for doing the hard work to make this tutorial.
Unfortunately my phone got stuck in a TWRP bootloop at the last stage of the process and I can't get out of it!
Things that were successful when I followed the steps in the tutorial:
unlock/installing twrp/installing Chinese ROM (20.1.16)/ installing 20.1.16 eu ROM (this successfully booted)
BUT since I installed Android One 10.3.13 (LaurelSprout Global) (no errors - I did follow the extraction of system.img process)), and then Magisk 19.4 (no errors) my phone has been stuck in TWRP boot loop. Each time the device is booted it goes direct to TWRP. Please help!
THINGS I've tried:
Flashing the EU and China MIUI roms (20.1.16). Still won't boot.
I've tried using Magisk uninstall. I've done factory reset multiple times, and wiped data etc. No luck.
I also (perhaps stupidly) wiped the System partition at one point.
OTHER info: FastBOOT can be booted with the button combo.
but ADB doesn't find my device.
Can someone please help me return to a working android image?
UPDATE:
I managed to restore my phone using MiFlash to flash the FASTBOOT China stock system image (V11.0.2.0) from flashxiaomi dot com.
At the time the phone was stuck in a Fastboot loop ( I couldn't get into TWRP anymore), and periodically it would automatically reboot and go straight back into fastboot.
I'm back to where I started now. May try this process again soon.

Daily Driver?
Is anyone successful? Is it OK to use it as a daily driver?

Still works? As of June 6th. Thanks in advance

Hello, is that method still work?
Can I get system updates , educate me how to get update after doing this methods.

Hello, I changed my CC9E ROM to Mi A3 via this method, how to upgrade from Android 9 to Android 11. Thanks.

Can i install custom rom of Mi A3 with this way ? Or can i found CC9e Rom in somewhere ? I want install Pixel experiment

5S/5G Roms and Root Mega thread [Updated November 2022]

Nubia Red Magic 5G and 5S Roms and Root support Thread
Second post for TWRP and Magisk installation. Mirror for all roms and tools at end of post
Latest Official Rom updates
Android 11
US/Asia - V8.70 Nubia Link MD%: will update soon
EU - V7.70 Nubia Link MD5: will update soon
China - V9.50 Nubia Link MD5: 361AC13CA52AB83C239783FBAB088CEA
Android 10
US/Asia - V8.12 Nubia Link MD5: 6e930fc2431b3daeae2d94145926a6c1
EU - V7.15 Nubia Link MD5: bb9e3153716851e87f196ae6b4f44a2e
China - V6.23 Nubia Link MD5: BD447840ACA4D48F9443B94D2EAD890F
Change Log - 8.70 / 7.70 Android 11
- Security Patch October 2022
- Game Space enhancements
- Game space Gyro sensitivity menu
- game space touch sample rate improvement
- Fixed: corner of screen non-touchable in some cases
- Fixed: issue where game would fail to close
- Fixed: location of caller display
-Fixed: screen tearing when using 144hz
-
Bugs -
in Testing
- Always on display notification not showing
- memory leak in nubia launcher (requires forced close often to stop phone from lagging)
- small window mode for telegram and discord have wrong zoom/ aspect levels.
_____________________________________________________________________________________________________________
UNBRICK TOOL for 5S - Courtesy of @johnny886
Use this tool, with directions on the thread to restore your device to USA/Asia 8.07
you can then install TWRP and after flash any region rom after creating a somewhat universal unbrick tool for those in different regions.
Follow directions on the thread. but here is a link to the Thread. A Mirror for the tool is in my Personal Mirror at the bottom of this thread post.
Link to Thread
Confirmed working with 5G devices - but its recommended to update as soon as you unbrick.
_____________________________________________________________________________________________________________
For unlocked bootloader
Fix your fingerprint sensor.
here Link
--------------------------------
Update Instructions.
Note
for Android 11 do not flash through TWRP you will softbrick.
____________________________________________________________________
For Stock devices without root
- disable security. No pin, no face unlock, no finger print, no pattern. remove all security.
-download zip file
-go to system update tap three dots and select local update
-Navigate to update.zip and select.
-your phone will reboot and install new rom
- you phone will reboot once more and you will be greeted with your lock screen
- setup Phone with security options as before flash.
For devices with "LOCKED bootloader" Root / TWRP (not tested on A11)
- take backup of vbmeta and recovery partitions in TWRP
- change the name of both files to vbmeta.img and recovery.img
(VBmeta is often 64kb big and Recovery is often 90+mb big.)
- copy and paste these new img files into the update zip.
- flash through TWRP
- go back to main menu, select advanced, then select option
"disable replace TWRP" to keep TWRP as your recovery.
for devices with "Unlocked bootloader" (not tested on A11)
-make full backup
-download zip
-install zip through TWRP
-reboot
__________________________________________________________________________________
Custom Roms and Kernels
Kernel
Mattofthedead's Redmagic 5S kernel for LOS and Stock roms LINK
Roms
Rom Builder Ra's Custom Roms - Please post any bugs or issues in the related threads.
Pixel Experience Plus
Ressurection Remix
NOTE : to boot any Custom rom on the 5S device. Flash the Rom following the directions. then flash Matts LOS kernel Version 3
__________________________________________________________________________________
------------------------------
Old roms
Android 11
V8.65 Nubia Link MD5: 3d52e18c66366d3d23744184425d3926
V8.64 Nubia Link MD5: a7e61f5e2f7c377a6850cf6ac3a62aa7
V7.65 Nubia Link MD5: 746dad5b6145dfba1108355095a6ad46
V7.64 Nubia Link MD5: 55371ee8e5728aee2bc7df5b3a7d6585
V9.42 Nubia Link MD5: D492B92DD83B366508CDD74DE7D152A3
V9.40 Nubia Link MD5: D28F26289A9B75F771EF4F623F0BB367
V8.57 Nubia Link MD5: 266819d4b09c2c52aadb39e948dc84bc
V8.59 Nubia Link MD5: d7e32b7a3e833adc57fcf734aa47f5a3
V7.57 Nubia Link MD5: 81ee71869f660a28b631d871ffb59524
V7.60 Nubia Link MD5:
V9.26 Nubia Link MD5: 8997375CD97D8F7F261F21121FC8EFAA
Android 10
v6.18 Link MD5: 9AC5EA5F64835C1995E4A81D4973FB71
V6.13 Link MD5: F38ED2D7CB58252D308B29D1D4517DB9
V7.07 Link MD5: ffc3fdaf4afc522aa3a084d9275f2cb6
V7.14 Link MD5: 0f879160fbf8b556de5303207b93d0d1
V8.07 Link MD5: b30dab221be73292c5da7884afc0363f
V8.11 Link MD5: 85d9366a3017112cb68d66041e725ce6
________________________________________________________
Personal Mirror - Located in Eastern Canada
________________________________________________________

TWRP and root guide for 5S and 5G on Android 10 only - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked during and after process is complete.
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put an installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file found at the end of this post
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted. (CD = Change Directory)
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable replace TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Reboot to system for the first time and complete the initial setup. this is to create the user space partitions data/media ( preferably do not make a pin or pattern at this stage)
13. once in the rom, connect to PC and copy over the Magisk zip to the internal memory. then reboot holding Volume up
14. once back into TWRP (if you created a pin during setup TWRP will ask you for your pin to access data) go into install and flash the Magisk.zip you moved in step 13 then reboot. once back into the rom, you will see a Magisk app, tap it and allow to update, the APK will install latest version of the manager.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have an update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini - zip updated with Magisk 21.4 zip
MD5 for ADBfastbootmini.zip: 0ad97a9ae1539b26ef78c849b169e807
I'm working on a process that will update to Android 11, through TWRP and root, without losing data. Much like a stock update.
I will update the thread once my tests are complete.

Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated

josehdx said:
Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated
Click to expand...
Click to collapse
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)

Patrick Morgan said:
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)
Click to expand...
Click to collapse
Thanks
Working fine after full data partition wipe.
I have an additioal question regarding further updates, and i would not want to open a new topic. so, after flashing the zip, i "lost" TWRP but i already have root access. I wonder if is possible to flash upcoming updates with the default recovery built in on the phone, if not, i would assume i need to install TWRP again.in any case, will side loading update make any problem with the current system? i hope my question and context is clear

As these are official ROMs, they will replace the recovery and remove root from the phone.
If you do not have root, flashing these zips from the system menu local update should work. But if you have root or TWRP it's better to flash through TWRP.
You could just flash TWRP again after flash, but I personally modify the zip and add the recovery to it to save me going into fastboot after each update.

Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.

Darkvenum79 said:
Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.
Click to expand...
Click to collapse
I've spoken with another EU rom user, that has the same issue before. it seems it was an error in the stock rom.
reinstalling 7.07 from the links above should fix your problem.
both 7.07 (the EU rom) and 8.07 (the US rom) are exactly the same. the only difference is the languages from what I can tell.

I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks

josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
No it wont.
There is a specific step by step that is required to get it functioning again. And it only survives until your next full wipe, which i assume you will do more often flashing non official roms.
I can grab the steps and edit this post for you.
Edit -
Prep.
have a black / very dark brown leather. (belt, wallet, etc)
a soft gel plaster / Bandaid
(something skin textured and in a pink / light beige colour) texture and colour are important.
First step is clear data in the infingerprint app in app info and remove permissionfor data memory - (you need to show system apps to find it)
- digit in call phone code:
*#9959#
(android 11 use Activity launcher (playstore) to enter fingerprint menu)
- uncheck performance checkbox , check only calibration checkbox
Steps -
1. Press start then wait.
2.Press next and with plaster / bandaid press on circle
3.Press next and use wallet / belt ( the display becomes black for black calibration)
4.Press next and use gel plaster / bandaid again but pinch it in so only the part with your finger touches the circle.
If you are lucky see success alert in green color
In system app in setting In-Display-Fingerprint allow access to data memory then reboot device.
Enjoy your Finger Print once more!
P.S. = do this procedure in a very dark room to improve the chances of it succeeding.
Thanks to qtr1st (Salem) and mikekrunk (Mike) for the steps and information.

josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
Patrick Morgan said:
TWRP and root guide for 5S - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked after process is complete.
Pretty short step by step to get twrp and Magisk if you want, on your phone. (Red Magic 5S)
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put a installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file attached or mirrored
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted.
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have a update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
where is the link of twrp.img

sansha1211 said:
where is the link of twrp.img
Click to expand...
Click to collapse
Patrick Morgan said:
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
that file called Link ADBmini has all you need

Is it ok to flash Eu rom to my NA/asia rom?

After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please

Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
reboot to bootloader by... power off device -> press and hold volume down and power button until you see the logo -> connect device to your computer then do the steps 7 to 12
also once you are in TWRP make sure you ... this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.

Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
if you have not removed your pin before flashing any of the roms. it asks you for YOUR own pin that you made when you setup the phone. so use your own pin.
the process of rooting your device, clears a security partition. (the VBmeta partiton)
this deletes the encryption you had on your phone. so the devices partitions are unaccessable and need to be wiped before you can boot to system.
you need to clear data. all data. then check in TWRP file browser if your data partition is clear. .. if you see folders with random letters its not been formatted correctly.
so, in the wipe menu on TWRP you should go into advanced and change the partition type to ext4 then back to f2fs to clear the partition of data.
once your phone is clear you should be able to wipe cache and davik then reboot to system for it to start like a factory reset.

sansha1211 said:
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
where is the link of twrp.img
Click to expand...
Click to collapse
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?

josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
adb devices
adb reboot bootloader
fastboot devices
fastboot flashing lock

josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
via cmd -- fastboot flashing lock

After i reboot in TWRP and disable replace TWRP, i install magisk from a USB otg, and then i wipe all data, then i reboot system but it keeps opening TWRP in every reboot, i had to install Stock Rom to have my phone back but without root, what im doing wrong?? thanks
Edit: now it worked, tried a few times and worked don't know what failed