First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
-----------------------2017.12.07 update---------------------------
sorry for so many needless steps of the old method.
root mate9 emui8 now only need 2 steps (so please neglect the old method).
new method:
1. reboot to fastboot mode . and fastboot flash recovery_ramdisk this
2. reboot to recovery mode. flash supersu 2.82 sr5 mod. (download link)
done!
ps: i have compared the "supersu 2.82 sr5 mod" to official supersu 2.82 sr5
the only different is:
the 683th line of file: "/META-INF/com/google/android/update-binary"
official package is : TRY="boot_a BOOT_A $TRY"
and the mod package is: TRY="ramdisk_a RAMDISK_A $TRY"
so the the mod package can be trusted i think.
that's all !
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
----------------------------------------------------------------
old method ( too many needless steps, please read the new method!):
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .
thanks very much!!!!!!
OP, How did u upgrade to oreo? I also have an AL00
Astra1 said:
OP, How did u upgrade to oreo? I also have an AL00
Click to expand...
Click to collapse
there are two posts told me how to update mate9 from nougat to oreo
1. https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
2. https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
notice:
a. the part of post 1 --"2.1 Method 1 using HWOTA Tool–" works on my mate9 Android N (emui 5.0) .
b. the part of post 2 --"Downgrade Nougat" works on my mate9, i succeed to downgrade to Nougat emui5.0 MHA-AL00C00B233.
c. the attachment of the post 1 seem to be designed to work on mate9 pro(because of the "LON") , so i modified the package to fit mate9. i don't know if it's neccessary.
i have wrote a guide，but it's in Chinese . 2rd floor (2#) of this post
Good Luck！
abbyvictor said:
First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
Click to expand...
Click to collapse
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app
Maheriraqi said:
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!
abbyvictor said:
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!
Click to expand...
Click to collapse
Thank you, but I need to files twrp and how to install on the oreo 8
Sent from my [device_name] using XDA-Developers Legacy app
Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!
AlemSalleh said:
Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!
Click to expand...
Click to collapse
It's my pleasure.
but i found this guide contains many redundant steps
i will simplify it later.....
viper4android for emui 8.0 ?
[No message]
hijibiji said:
viper4android for emui 8.0 ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2191223
no version for Oreo until now as i know
I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB
Flavio said:
I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB
Click to expand...
Click to collapse
/recovery has a new name "recovery_ramdisk" in mate9 oreo
if you want to flash stock recovery , you should execute " fastboot flash recovery_ramdisk xxxxxxxxxxxxx.img" in fastboot mode.
"RECOVERY_RAMDIS" may be refer to "recovery_ramdisk", so try to execute " fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img" in fastboot mode.
i'm not sure.
gook luck!
Related
Hello, sorry for my bad English. I have the following problem. I have problem with my phone QISVNS-L31 Vodafone, After updating to android nougat via firmware finder, I got some cut beta version, and then I used rollback recovery to marmalow. The phone started, but the problem with the google account followed, I tried a flash again on a rollback recovery and the phone was bricked. Restarts and stuck on the Huawei logo. After reading the forums, I unlocked the bootloader, I did everything as described for recovery img's system, boot, recovery, via a fastboot menu but continues to stand on the Huawei logo. Please help me how to fix it
@k1ll3r8e I read a lot of topics and I saw that you helped many people to solve their problems. Would you help me in my case
Sbodurov88 said:
@k1ll3r8e I read a lot of topics and I saw that you helped many people to solve their problems. Would you help me in my case
Click to expand...
Click to collapse
Heyho,
have a look at this post, it's for an L21 but the same procedure will also work on an L31.
Important! Use only files for an L31 not the mentioned L21 files!
If u get stuck, just quote me here.
Regards,
Sebastian
k1ll3r8e said:
Heyho,
have a look at this post, it's for an L21 but the same procedure will also work on an L31.
Important! Use only files for an L31 not the mentioned L21 files!
If u get stuck, just quote me here.
Regards,
Sebastian
Click to expand...
Click to collapse
Now i download vns-l31c432b370full, extract recovery from update.app via (extractor). boot into the bootloader via fastboot reboot-bootloader (command), fastboot flash recovery twrp-3.1.1-0-venus.img, But i can not get in to recovery via (vol+ & power).
If I'm wrong somewhere, I would ask you to explain in more detail how to do it because I obviously miss something and I'm not getting things. Thank you in advance. I've been trying to fix it for 12 hours, and I'm already desperate. If I need a Team Viller to let you go if it's easier.
This is all information NOW about phone:
Model: HUAWEI VNS-L31 SS
IMEI: 86092103484XXXX
Firmware ver.: VNS-L31C900B161
SN: 4TE7N1662700XXXX
Sbodurov88 said:
Now i download vns-l31c432b370full, extract recovery from update.app via (extractor). boot into the bootloader via fastboot reboot-bootloader (command), fastboot flash recovery twrp-3.1.1-0-venus.img, But i can not get in to recovery via (vol+ & power).
If I'm wrong somewhere, I would ask you to explain in more detail how to do it because I obviously miss something and I'm not getting things. Thank you in advance. I've been trying to fix it for 12 hours, and I'm already desperate. If I need a Team Viller to let you go if it's easier.
This is all information NOW about phone:
Model: HUAWEI VNS-L31 SS
IMEI: XXXXXXXXXXXXXX
Firmware ver.: VNS-L31C900B161
SN: XXXXXXXXXXX
Click to expand...
Click to collapse
Heyho,
u are on B161 that means u need an MM recovery not an N. Just get u this "package" for my toolkit. There is an MM recovery included.
This should boot
Regards,
Sebastian
k1ll3r8e said:
Heyho,
u are on B161 that means u need an MM recovery not an N. Just get u this "package" for my toolkit. There is an MM recovery included.
This should boot
Regards,
Sebastian
Click to expand...
Click to collapse
Now im in the TWRP Mode what is the next step ?
Sbodurov88 said:
I apologize for the blunt question, but I'm totally wrong. Which firmware must download now before following the steps in the previous post? Because I think I totally overwhelmed it and if there was a way to start everything from the beginning of the clean one it would be best, because I do not remember how many different firmwares and recovery's I installed. Again, I apologize for stupid questions and that I do, but I really do not know what to do next.
Now im in the TWRP Mode what is the next step ?
Click to expand...
Click to collapse
Heyho,
(a bit modified to ur needs)
7) flash the L31C432B130 DS or SS oeminfo with the toolkit (Dual-/Single-SIM tab)
8) don't let the device reboot (on the reboot attempt when the device turns off, press and hold [Vol- Power])
9) flash the recovery from the L31C432B130 (contained in the DS or SS TK package)
10) copy the L31C432B130 update.app onto ur sd-card (dload)
11) place the sd-card inside the device (still booted in fastboot)
12) unplug the device from any kind of usb connection
13) hold power until the device turns off
14) start immediately, when the screen is black, pressing [Vol+ Vol- Power]
15) wait until the update is done
16) reboot
17) do a dummy setup and head directly to settings->advanced settings->Reset->Factory Reset
18) DON'T ROOT THE DEVICE!
19) install all updates until u are back on L31C432B380 (via settings->update)
20) DONE!
21) (optional) now u can unlock ur device and flash the twrp and root from my signature
Regards,
Sebastian
k1ll3r8e said:
Heyho,
(a bit modified to ur needs)
7) flash the L31C432B130 DS or SS oeminfo with the toolkit (Dual-/Single-SIM tab)
8) don't let the device reboot (on the reboot attempt when the device turns off, press and hold [Vol- Power])
9) flash the recovery from the L31C432B130 (contained in the DS or SS TK package)
10) copy the L31C432B130 update.app onto ur sd-card (dload)
11) place the sd-card inside the device (still booted in fastboot)
12) unplug the device from any kind of usb connection
13) hold power until the device turns off
14) start immediately, when the screen is black, pressing [Vol+ Vol- Power]
15) wait until the update is done
16) reboot
17) do a dummy setup and head directly to settings->advanced settings->Reset->Factory Reset
18) DON'T ROOT THE DEVICE!
19) install all updates until u are back on L31C432B380 (via settings->update)
20) DONE!
21) (optional) now u can unlock ur device and flash the twrp and root from my signature
Regards,
Sebastian
Click to expand...
Click to collapse
How to flash this ? I've already downloaded it but I do not know how to install it7) flash the L31C432B130 DS or SS oeminfo with the toolkit (Dual-/Single-SIM tab)
What is this toolkit ? This is (SRKToolHuawei-Lod-Chong-V2.0-20161002) or not ?
Sbodurov88 said:
How to flash this ? I've already downloaded it but I do not know how to install it7) flash the L31C432B130 DS or SS oeminfo with the toolkit (Dual-/Single-SIM tab)
What is this toolkit ? This is (SRKToolHuawei-Lod-Chong-V2.0-20161002) or not ?
Click to expand...
Click to collapse
Heyho,
the thread i linked u was my toolkit thread^^
Regards,
Sebastian
k1ll3r8e said:
Heyho,
the thread i linked u was my toolkit thread^^
Regards,
Sebastian
Click to expand...
Click to collapse
Ok now i open SRKToolHuawei-Lod-Chong-V2.0-20161002. I chose step 7 then 9 then 8 then 2 but "waiting for device"
Sbodurov88 said:
Ok now i open SRKToolHuawei-Lod-Chong-V2.0-20161002. I chose step 7 then 9 then 8 then 2 but "waiting for device"
Click to expand...
Click to collapse
Dude... I'm NOT the dev of the SRK toolkit as already mentioned... Does u have read the last link?...
k1ll3r8e said:
Dude... I'm NOT the dev of the SRK toolkit as already mentioned... Does u have read the last link?...
Click to expand...
Click to collapse
now i download 2017-05-28.1312.zip and flash pkg.L31C432B130_SS. The next step is moving update.app to sdcard ?
Sbodurov88 said:
now i download 2017-05-28.1312.zip and flash pkg.L31C432B130_SS. The next step is moving update.app to sdcard ?
Click to expand...
Click to collapse
if u have downloaded the L31C432B130 u mentioned before, yes.
k1ll3r8e said:
if u have downloaded the L31C432B130 u mentioned before, yes.
Click to expand...
Click to collapse
I have this firmware VNS-L31C432B371 FULL and extracted recovery from him. Can I use it or I must use this L31C432B130
Sbodurov88 said:
I have this firmware VNS-L31C432B371 FULL and extracted recovery from him. Can I use it or I must use this L31C432B130
Click to expand...
Click to collapse
Nope, u can't... Because, how should a N recovery work on an MM kernel? Just do what i wrote, or don't do it... I don't confirm u any step u have to... I wrote a really detailed list of things to do. Also i mentioned specific FW versions for exact that reason, because u can't flash a N recovery on an MM kernel and u can't flash a MM recovery on a N kernel.
k1ll3r8e said:
Nope, u can't... Because, how should a N recovery work on an MM kernel? Just do what i wrote, or don't do it... I don't confirm u any step u have to... I wrote a really detailed list of things to do. Also i mentioned specific FW versions for exact that reason, because u can't flash a N recovery on an MM kernel and u can't flash a MM recovery on a N kernel.
Click to expand...
Click to collapse
Sorry to make you explain in detail just and I'm trying all day ... Now I got into a toolkit, did not recognize the device
http://imgur.com/a/azjwb
Now the phone info is this :
Model: HUAWEI VNS-L31
IMEI: 86092103016XXX
Firmware ver.: VNS-L31C432B130
SN: 4TE7N1662700XXXX
Sbodurov88 said:
Sorry to make you explain in detail just and I'm trying all day ... Now I got into a toolkit, did not recognize the device
http://imgur.com/a/azjwb
Now the phone info is this :
Model: HUAWEI VNS-L31
IMEI: XXXXXXXXXXXX
Firmware ver.: VNS-L31C432B130
SN: XXXXXXXXXXXX
Click to expand...
Click to collapse
Heyho,
pls never post ur IMEI or serial on any forum.
-
Seems u should re-activate USB-Debugging.
Regards,
Sebastian
k1ll3r8e said:
Heyho,
pls never post ur IMEI or serial on any forum.
-
Seems u should re-activate USB-Debugging.
Regards,
Sebastian
Click to expand...
Click to collapse
I do not have a USB-Debugging because I have not yet managed to bring the phone to a home screen. After yesterday's procedures, I installed a toolkit. I managed to update from the DUAL / Single Sim menu (upgrading the L31C432B130 single sim). I followed these steps by step 7) flash the L21C432B130 DS oeminfo with the toolkit (Dual-/Single-SIM tab) (after this step my bootloader is locked)
8) do not let the device reboot (on the reboot attempt when the device turns off, press and hold [Vol-Power])
9) flash the recovery from the L21C432B370 update.app and extracted befores (
10) copy the L21C432B130 update.app to ur sd-card (dload)
11) Place the sd-card inside the device (still booted in fastboot)
12) unplug the device from any kind of usb connection
13) hold power until the device turns off
14) start immediately, when the screen is black, pressing [Vol + Vol
. But the device did not start updating the SD card update.
I unlocked the bootloader again, I returned TWTP recovery and tried to do the steps again from the start, but the toolkit no longer recognizes my device.
Apparently I will not be able to do it myself, is there any help you can help me through Team Viewer or similar program because I have already lost hope. I apologize once again that I do so much, but I just can not handle it myself.
Sbodurov88 said:
I do not have a USB-Debugging because I have not yet managed to bring the phone to a home screen. After yesterday's procedures, I installed a toolkit. I managed to update from the DUAL / Single Sim menu (upgrading the L31C432B130 single sim). I followed these steps by step 7) flash the L21C432B130 DS oeminfo with the toolkit (Dual-/Single-SIM tab) (after this step my bootloader is locked)
8) do not let the device reboot (on the reboot attempt when the device turns off, press and hold [Vol-Power])
9) flash the recovery from the L21C432B370 update.app and extracted befores (
10) copy the L21C432B130 update.app to ur sd-card (dload)
11) Place the sd-card inside the device (still booted in fastboot)
12) unplug the device from any kind of usb connection
13) hold power until the device turns off
14) start immediately, when the screen is black, pressing [Vol + Vol
. But the device did not start updating the SD card update.
I unlocked the bootloader again, I returned TWTP recovery and tried to do the steps again from the start, but the toolkit no longer recognizes my device.
Apparently I will not be able to do it myself, is there any help you can help me through Team Viewer or similar program because I have already lost hope. I apologize once again that I do so much, but I just can not handle it myself.
Click to expand...
Click to collapse
Heyho,
in that case that u can't boot into the system, u simply need to deactivate the "device check" in my TK, then every device will be detected even an HTC...
Also i hope u don't flashed a L21 oeminfo... Because u don't quote the steps i wrote u on this thread...
So what have u did now in detail?
U flashed the oeminfo (L31C432B130)?
U flashed after that the stock recovery (L31C432B130)?
U started the update from sd?
Regards,
Sebastian
k1ll3r8e said:
Heyho,
in that case that u can't boot into the system, u simply need to deactivate the "device check" in my TK, then every device will be detected even an HTC...
Also i hope u don't flashed a L21 oeminfo... Because u don't quote the steps i wrote u on this thread...
So what have u did now in detail?
U flashed the oeminfo (L31C432B130)?
U flashed after that the stock recovery (L31C432B130)?
U started the update from sd?
Regards,
Sebastian
Click to expand...
Click to collapse
I finally got the rom and I'm already on the phone menu. Now I want to upload Nugat FOR L31- Singel Sim. Can you explain in more detail how to get it through Firmware Finder or some other way with TWRP (does it matter which rum I have first to upload).
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hey guys, Today I am creating a Guide on How to Convert Mi A2 to Mi 6X without triggering ARB.
This guide is based on Guide by @yunusasik(Telegram : @dejavutr ) so All credit goes to Him.
First of All Download the Convert.zip from here
All files needed to be replaced have already been replaced in convert.zip.
Then, Follow the Following Steps to Flash Mi 6X Firmware on your A2
First Make Sure you already unlocked bootloader flashing and flashing critical ("fastboot flashing unlock" and "fastboot flashing unlock_critical")
1) Install Qualcomm Driver (next next next) (Also Windows update can do this trick when you plug )
2) Install QPST (use setup from the QPST Alternative folder. )
(find QFİLL on start menu or qpst installed directory), open QFİLL from start menu or opst installed folder.
3) Select Flat Build Mode
Select Programmer File prog_emmc_firehose_Sdm660_ddr.elf ( already changed no arb risk )
Select XML files rawprogram0 and patch0.xml
4) Put the phone on the edl mode
navigate to ADB Folder and Open tikla.bat, it will open command windows in that directory.
Use "fastboot oem edl" command to Enter "Emergency Download Mode ( EDL )"
Press Download
When install finish. Power up the phone.
MIUI 9 Ready to BOOT (First boot may take time you can hard reset via pressing vol up - down and power together )
5) You dont need to setup miui 9 just go fastboot again (vol down + power ( when phone closed ) )
From this section you can either install MIUI 10 (OREO) or Custom ROM ( Which one you want )
Guide will be Resume about flashing MIUI 10 ( OREO )
Flash TWRP
" fastboot flash recovery twrpwayne.img "
" fastboot boot twrpwayne.img "
If twrp start chinese you can set language on that screen
6) Wipe / Advanced Wipe
7) System + Dalvik + Cache + Data + Internal
8) Flash MIUI 10(no arb).zip via adb sideload (put file into adb folder and use adb sideload MIUI 10 (no arb).zip) or put file on the
storage via mtp, if its works
" No need for gapps "
If you want root Flash Magisk.
Welcome to MIUI 10 without arb
You can use MiFlash Tool 2016 64Bit only this one works good others may stuck sometimes and risky because if you unplug when installing you have to use test point method for saving phone.
You can enable camera2api with "Camera2api enabler" on play store (ONLY MIUI 10 OREO)
If qfill installation somehow corrupt use "QPST Alternative" folder or Miflash from above
You can Download Newer MIUI Releases from here
Just make sure to delete the "firmware-update folder" using winrar etc.
-------
UPDATİNG TO MIUI 10 PIE
Download MIUI 10 PIE from here (if you are in mobile press "try download anyway" )
Open zip file and delete "Firmware Upgrade" folder from the zip (Most İmportant)
Boot into TWRP
Go Wipe / Advanced Wipe
Wipe "System + Dalvik + Cache + Data"
(Make sure you are using ext4 file system on Cache and Data partition)
Flash MIUI 10 Pie zip
Flash Hex Kernel download from here (We need this because we are not using fw update folder for updating kernel etc (because its trigger arb 4))
Flash Magisk if you want root
Reboot to system
Welcome to MIUI 10 Pie
You can check new mıuı eu updates from here.
For enabling camera2api on MIUI 10 Pie you have to edit build prop download this application from play store
Give root permissions
Search for HAL3 then change boot of them 0 to 1
Restart the phone.
For stable gcam use this
------
Converted Mi6X Indian Variant Camera FİX
1. Flash any custom ROM or MIUI 10 ROM firmware-update folder deleted.
2. Flash the zip from here via TWRP.
3. Reboot
------
Convert Back to A2
Download latest a2 stock rom.
Put phone to edl mode again (fastboot oem edl)
Flash stock rom via QFİLL with same method (Select .ddr and xml files from stock rom folder) and power up.
Done.
(If you have wifi camera or splash screen problems. Flash stockrom with miflash on fastboot (vol down + power ) again.)
(Alternative) You can use MiFlash Tool 2016 64Bit to convert back.
Select A2 stock rom folder.
Put phone to edl mode (fastboot oem edl).
Flash Rom when its done, power up the phone to fastboot (vol down + power ) and flash rom again. (for solving any camera wifi etc issue)
FAQ
Is there any alternative to this twrp ?
- Yes you can use alternatives, this one my fav.
Is there any alternative to this kernel ?
- Yes you can use NeonKernel, Reign Kernel or this EAS kernel from @rcstar6696
I got triggered ARB4 can I go back to A2 ? ( Unlocked Bootloader )
- Yes you can convert back to A2 with test point here is the guide for that. Thanks @powar19
If you have any questions feel free to ask.
Credits :-
1) @yunusasik Telegram : @dejavutr
2) @akshayakakat
For Support :-
1) https://t.me/mia26xBr
2) https://t.me/mia2official
3) https://t.me/mia2turkiye
Just converted 2 days ago using this guide. Works like a charm. Thanks
Guide works flawless no one should hesitate to do it.
Used this 2 days ago. Working perfectly without problems.
stuck at adb sideload in twrp,what to do bro?
Why would I want to do that?
Will it fix the A2 bugs?
Can i Install wayne aosp roms after applying this?
Sent from my Xiaomi MI A2 using XDA Labs
lsd95 said:
Why would I want to do that?
Will it fix the A2 bugs?
Click to expand...
Click to collapse
What bugs? For me it did solve an issue from A2, the slow micron storage.
Thanks for this guide!
stridedesu said:
What bugs? For me it did solve an issue from A2, the slow micron storage.
Thanks for this guide!
Click to expand...
Click to collapse
Like the proximity sensor bug, unlocking phone lag, gps with Google accuracy turned on...
dr460nf1r3 said:
Can i Install wayne aosp roms after applying this?
Click to expand...
Click to collapse
akshayakakat said:
You dont need to setup just go fastboot again
From this section u can either install miui 10 or custom rom guide will be resume about flashing miui 10
Click to expand...
Click to collapse
Seems like you can
I'm curious, how long does it take for QFIL to process MIUI9 stuff? I pressed download button and it's stuck or something for like an hour now.
alveola666 said:
Seems like you can
I'm curious, how long does it take for QFIL to process MIUI9 stuff? I pressed download button and it's stuck or something for like an hour now.
Click to expand...
Click to collapse
It does take a long time than Mi Flash. I check from time to time where it stopped and it does move a bit, like a snail's pace kind of slow.
lsd95 said:
Like the proximity sensor bug, unlocking phone lag, gps with Google accuracy turned on...
Click to expand...
Click to collapse
I do not have those bugs before I converted, so I can't help, sorry >_<
akshayakakat said:
Hey guys, Today I am creating a Guide on How to Convert Mi A2 to Mi 6X without triggering ARB.
This guide is based on Guide by @yunusasik so All credit goes to Him.
First of All Download the convert.zip from here
All the files needed to be replaced have already been replaced in convert.zip.
Then, Follow the Following Steps to Flash Mi 6X Firmware on your A2
1) Install Qualcomm Driver (next next next)
2) Install qpst (find qfill on start menu or qpst installsd directory)
3) Select Flat Build Mode
Select Programmer File prog_emmc_firehose_Sdm660_ddr.elf (already changed no arb)
Select XML files rawprogram0 and patch0 xml
4) Put the phone on the edl mode
navigate to ADB Folder and Open tikla.bat, it will open command windows in that directory.
"fastboot oem edl" make sure u have unlocked flashing and critical (check via fastboot oem device-info)
Press download
MIUI 9 Ready
5) You dont need to setup just go fastboot again
From this section u can either install miui 10 or custom rom guide will be resume about flashing miui 10
Flash Twrp
fastboot flash recovery twrpwayne.img
fastboot boot twrpwayne.img
If twrp start chinese you can set language there
6) Wipe / Advanced Wipe
7) System + Dalvik + Cache + Data + Internal
8) Flash MIUI 10(no arb).zip via adb sideload (put file into adb folder and use adb sideload filename.zip) or put file on the
storage via mtp if its works
" No need for gapps "
If you want root Flash Magisk.
Welcome to MIUI 10 without arb
If u wanna come back to Mi A2 just flash latest stock rom via qfill again.
U can use miflash but its stuck sometimes and risky because if u unplug when installing u have to use test point method for saving phone.
U can enable camera2api with "Camera2api enabler" on play store
If QFIL Does not work try QPST Alternative
You can Download Newer MIUI Releases from here
Just make sure to delete the firmware-update using winrar.
Credits :-
1) @yunusasik
2) @akshayakakat
For Support :-
1) https://t.me/mia26xBr
2) https://t.me/mia2official
3) https://t.me/indiamia2
Click to expand...
Click to collapse
stridedesu said:
It does take a long time than Mi Flash. I check from time to time where it stopped and it does move a bit, like a snail's pace kind of slow.
I do not have those bugs before I converted, so I can't help, sorry >_<
Click to expand...
Click to collapse
I remember reading a thread related to sensor issue. There is already a post regarding this sensor issue in this forum. probably u need to re-flash the persist .img from fastboot but dont do it just blindly. rather search the forum and refer to that thread before proceeding.
very goo guide, simple and easy... but i reverted to mi A2 because MIUI did not have some featured i needed and now i have a "problem"... i dont have fastboot image and boot image sometimes is a black screen or the Mu logo and then starts the android one bootanimation, how can i fix that? thx
jesan9 said:
very goo guide, simple and easy... but i reverted to mi A2 because MIUI did not have some featured i needed and now i have a "problem"... i dont have fastboot image and boot image sometimes is a black screen or the Mu logo and then starts the android one bootanimation, how can i fix that? thx
Click to expand...
Click to collapse
Reflash rom with fastboot, not use edl.
Use miflasher or qfil
Enviado desde mi MI 6X mediante Tapatalk
What about the cameras? Do we need to flash the camera fix ?
akshayakakat said:
Hey guys, Today I am creating a Guide on How to Convert Mi A2 to Mi 6X without triggering ARB.
This guide is based on Guide by @yunusasik so All credit goes to Him.
First of All Download the convert.zip from here
All the files needed to be replaced have already been replaced in convert.zip.
Then, Follow the Following Steps to Flash Mi 6X Firmware on your A2
1) Install Qualcomm Driver (next next next)
2) Install qpst (find qfill on start menu or qpst installsd directory)
3) Select Flat Build Mode
Select Programmer File prog_emmc_firehose_Sdm660_ddr.elf (already changed no arb)
Select XML files rawprogram0 and patch0 xml
4) Put the phone on the edl mode
navigate to ADB Folder and Open tikla.bat, it will open command windows in that directory.
"fastboot oem edl" make sure u have unlocked flashing and critical (check via fastboot oem device-info)
Press download
MIUI 9 Ready
5) You dont need to setup just go fastboot again
From this section u can either install miui 10 or custom rom guide will be resume about flashing miui 10
Flash Twrp
fastboot flash recovery twrpwayne.img
fastboot boot twrpwayne.img
If twrp start chinese you can set language there
6) Wipe / Advanced Wipe
7) System + Dalvik + Cache + Data + Internal
8) Flash MIUI 10(no arb).zip via adb sideload (put file into adb folder and use adb sideload filename.zip) or put file on the
storage via mtp if its works
" No need for gapps "
If you want root Flash Magisk.
Welcome to MIUI 10 without arb
If u wanna come back to Mi A2 just flash latest stock rom via qfill again.
U can use miflash but its stuck sometimes and risky because if u unplug when installing u have to use test point method for saving phone.
U can enable camera2api with "Camera2api enabler" on play store
If QFIL Does not work try QPST Alternative
You can Download Newer MIUI Releases from here
Just make sure to delete the firmware-update using winrar.
Credits :-
1) @yunusasik
2) @akshayakakat
For Support :-
1) https://t.me/mia26xBr
2) https://t.me/mia2official
3) https://t.me/indiamia2
Click to expand...
Click to collapse
Does the camera work for indian user???plez reply
megaxp said:
Reflash rom with fastboot, not use edl.
Use miflasher or qfil
Enviado desde mi MI 6X mediante Tapatalk
Click to expand...
Click to collapse
oh ok! well i used qfill, i will try to flash it with fastboot
i'll try it tomorrow.
in advance, if we can enable camera2api we can install gcam without problems, right?
Can this guide be followed on stock pie?
EDIT:
Nevermind, the method works on pie
But I am not able to use camera. Any tips?
EDIT2:
Nvm, I figured it out. Enabled camera2api, and flashed whyred miui camera in magisk.
Hi, is it possible to update HWOTA (Mate 9 rooted) to EMUI9 (MHA-L29C636-9.0.1.159 FullOTA-MF) with patch HWOTA8_2017110501 for Android 8 Oreo?
İ don't now
İ need answer to to trying this method
But my phone C185
And the update file in Firmware finder 2 file not 3
use Hrupdater
CouCouFR34 said:
Hi, is it possible to update HWOTA (Mate 9 rooted) to EMUI9 (MHA-L29C636-9.0.1.159 FullOTA-MF) with patch HWOTA8_2017110501 for Android 8 Oreo?
Click to expand...
Click to collapse
You would have to modify hwota script as Pie only uses 2 zips.
aureliomilitao said:
use Hrupdater
Click to expand...
Click to collapse
that's not recommended as Pie uses System as root.
ante0 said:
You would have to modify hwota script as Pie only uses 2 zips.
that's not recommended as Pie uses System as root.
Click to expand...
Click to collapse
how modify hwota script as Pie only uses 2 zips?>
same steps with 2 file works??
please my account HCU is block
need help for fix my IMEI with acount HCU via TeamViewer
Hi AnteO, I have the same question as Kilis ; how to modify the HWOTA script to use only the 2 zips ?
CouCouFR34 said:
Hi AnteO, I have the same question as Kilis ; how to modify the HWOTA script to use only the 2 zips ?
Click to expand...
Click to collapse
Remove the following line from update-binary in hwota8_update.zip and repack.
echo --update_package=/sdcard/HWOTA8/update_data_public.zip >> /cache/recovery/command
Or check out this post: https://forum.xda-developers.com/showpost.php?p=78962795&postcount=171
I want to patch new updates of emui 9 with latest google security patches so which no check recovery i use on emui 9.
OK it works very well and EMUI9 is definitely better than version 8; on the other hand how to reinstall TWRP?
I found this post from anteO
https://forum.xda-developers.com/mate-9/help/twrp-emui-9-android-pie-decryption-t3894735
it seems that TWRP is not easily installable ; would there be a solution, especially to install MAGISK ?
CouCouFR34 said:
I found this post from anteO
https://forum.xda-developers.com/mate-9/help/twrp-emui-9-android-pie-decryption-t3894735
it seems that TWRP is not easily installable ; would there be a solution, especially to install MAGISK ?
Click to expand...
Click to collapse
You don't need TWRP to install Magisk; for that matter, they can't be installed simultaneously on EMUI 9 together anyway.
The EMUI 9 method for Magisk is to patch recovery_ramdisk.img extracted from update.app, flash the patched image, and boot to recovery from then on. (Huawei made it impossible to load a custom ramdisk on Pie otherwise.)
Thank you irony_delerium for info's, but is there not a tutorial explaining the steps of modification ?
CouCouFR34 said:
Thank you irony_delerium for info's, but is there not a tutorial explaining the steps of modification ?
Click to expand...
Click to collapse
1) Make sure you've got the stock firmware zip files. (I'm assuming you do.)
2) Extract UPDATE.APP from the main update.zip file (the big one).
3) Using Huawei Firmware Extractor on your desktop (search on XDA for it), load UPDATE.APP and extract the recovery ramdisk image. It's going to be "RECOVERY_RAMDIS" in that app as I recall.
4) Put the image into your phone's internal storage (MTP works, though I've never used it, I usually use adb: adb push RECOVERY_RAMDIS.img /sdcard)
5) Install Magisk Manager on your phone. You want the current release (18.1) at the very minimum. Canary builds also work
6) Select the Install button in the Magisk interface. Select "Patch boot image". In the file browser that comes up, select the image you just transferred in #4.
7) When Magisk finishes, pull the image back to your PC (adb: adb pull /sdcard/Download/patched_boot.img)
8) Reboot to the bootloader and flash (fastboot flash recovery_ramdisk patched_boot.img)
9) Reboot to recovery (fastboot reboot, pull the USB cable and hold volume up).
Thank you irony_delerium ; very clear tutorial ; on the other hand, in UPDATE.APP there are 2 RECOVERY files : RECOVERY_RAMDIS.img and ERECOVERY_RAMDI.img which do the same weight; patching MAGISK with RECOVERY_RAMDIS.img I arrived at a system error and a dialogue asking me to either erase the data, or a factory restore; on the other hand with ERECOVERY_RAMDI.img it was installed alone? does it seem normal to you?
irony_delerium said:
1) Make sure you've got the stock firmware zip files. (I'm assuming you do.)
2) Extract UPDATE.APP from the main update.zip file (the big one).
3) Using Huawei Firmware Extractor on your desktop (search on XDA for it), load UPDATE.APP and extract the recovery ramdisk image. It's going to be "RECOVERY_RAMDIS" in that app as I recall.
4) Put the image into your phone's internal storage (MTP works, though I've never used it, I usually use adb: adb push RECOVERY_RAMDIS.img /sdcard)
5) Install Magisk Manager on your phone. You want the current release (18.1) at the very minimum. Canary builds also work
6) Select the Install button in the Magisk interface. Select "Patch boot image". In the file browser that comes up, select the image you just transferred in #4.
7) When Magisk finishes, pull the image back to your PC (adb: adb pull /sdcard/Download/patched_boot.img)
8) Reboot to the bootloader and flash (fastboot flash recovery_ramdisk patched_boot.img)
9) Reboot to recovery (fastboot reboot, pull the USB cable and hold volume up).
Click to expand...
Click to collapse
Hello
If you wouldn't mind confirming a few things from your post, as I'm trying to do this.
Is the sole purpose of extracting the big file to extract the recovery_ramdis ? You don't mention if anything is done with the big file.
The ADB commands didn't work for me, (error: push requires an argument).
But, I sent the recovery_ramdis via magisk manager, and it worked, then advised me that it put the image in /storage/emulated/0/Download/patched_boot.img but I can't find that location.
OK, edit ... I found the file and flashed it, rebooted into recovery and I get the message software installation failed.
I've had a whole lot of failures, phone won't root despite magisk giving no errors, dload won't work, superSU won't work.
Update .... root decided to work out the blue so I tried EMUI flasher and it looked like it was going to work ... but failed the update at about 10%.
Update - Bricked.
With the huawei support down, could anyone please help me to unlock huawei nova 2i RNE-L22 bootloader and to root it?
DC. UNLOCKER?
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
bootloader unlock codes forbidden
Chisetdel31260 said:
DC. UNLOCKER?
It says
> If your phone runs Android 8 or later with latest security patch - then this service won't work!
I have the latest security patch(March 1, 2019), I've been searching for the past 3 days for a working method to root my mate 10 lite, found nothing.
Huawei stopped providing oem unlock codes, All the services that provided unlock codes for money are now obsolete too.
I'm trying to find a way to root this phone on my own, but I'm not sure where to go from here.
I've read this book today "XDA Developers' Android Hacker's Toolkit", but it teaches how to use rooting methods that are already out there and not how to create your own way to root a device.
Can you provide guidance on where to go from here to learn how to find vulnerabilities in android?
Click to expand...
Click to collapse
"If your phone runs Android 8 or later with latest security patch - then this service won't work! " it's true , you must downgrade to Nougat via HiSuite .
it works
bozka1 said:
"If your phone runs Android 8 or later with latest security patch - then this service won't work! " it's true , you must downgrade to Nougat via HiSuite ane than using Service ROM flash FW with security patch max. april 2018. After you can get bootloader unlock code here
(4€/4$).
Service ROMs you can find here :
Type RNE- or Rhone or Mate 10 lite. Gl!
Click to expand...
Click to collapse
Thanks, it worked!
I got my bootloader unlocker, now I'm installing a custom rom, but there's no much custom roms for mate 10 lite.
m10_lite said:
Thanks, it worked!
I got my bootloader unlocker, now I'm installing a custom rom, but there's no much custom roms for mate 10 lite.
Click to expand...
Click to collapse
Best Custom ROM is Stock ROM & root .
bozka1 said:
Best Custom ROM is Stock ROM & root .
Click to expand...
Click to collapse
Do you have the guide for rooting RNE-L21, stock ROM, Android and EMUI version 8.0?
davideakc said:
Do you have the guide for rooting RNE-L21, stock ROM, Android and EMUI version 8.0?
Click to expand...
Click to collapse
He did already
bozka1 said:
"If your phone runs Android 8 or later with latest security patch - then this service won't work! " it's true , you must downgrade to Nougat via HiSuite ane than using Service ROM flash FW with security patch max. april 2018. After you can get bootloader unlock code here
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
(4€/4$).
Service ROMs you can find here :
https://androidhost.ru/search.html
Type RNE- or Rhone or Mate 10 lite. Gl!
Click to expand...
Click to collapse
ante0 said:
He did already
Click to expand...
Click to collapse
Sorry, I've not explained clearly what i want to do...
I'm already with bootloader unlocked, I need a guide for root the phone
davideakc said:
Sorry, I've not explained clearly what i want to do...
I'm already with bootloader unlocked, I need a guide for root the phone
Click to expand...
Click to collapse
Sorry, I misread. xD
Well, you can either flash TWRP for Oreo. Not sure which is "best" though, take one with decryption support if available for RNE on Oreo. Then you flash Magisk zip in twrp.
Or you can take your stock ramdisk and patch it in Magisk Manager, then flash the patched ramdisk from fastboot.
I would provably go with TWRP and Magisk zip though, as you would need a stock ramdisk from an update.app of your build. So saves some downloading
Basically flash TWRP using fastboot: fastboot flash recovery_ramdisk twrp.img
Reboot to recovery which will end up in TWRP. Flash latest Magisk using the Install button in twrp.
ante0 said:
Sorry, I misread. xD
Well, you can either flash TWRP for Oreo. Not sure which is "best" though, take one with decryption support if available for RNE on Oreo. Then you flash Magisk zip in twrp.
Or you can take your stock ramdisk and patch it in Magisk Manager, then flash the patched ramdisk from fastboot.
I would provably go with TWRP and Magisk zip though, as you would need a stock ramdisk from an update.app of your build. So saves some downloading
Basically flash TWRP using fastboot: fastboot flash recovery_ramdisk twrp.img
Reboot to recovery which will end up in TWRP. Flash latest Magisk using the Install button in twrp.
Click to expand...
Click to collapse
Don't worry, thanks for the fast reply!
davideakc said:
Don't worry, thanks for the fast reply!
Click to expand...
Click to collapse
I can't find any TWRP with decryption. This one might work, it's from the MorfuZ thread: https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
So it may or may not have working decryption. But if you have an external SD it doesn't really matter as you'd only transfer magisk to that.
Magisk from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download latest stable.
Flash twrp using fastboot.
Reboot to recovery.
Transfer magisk zip to external SD.
Flash Magisk zip using the Install button
You will probably have to browse to /external_sd manually as it will default to /sdcard in the install browser.
If it fails to install using TWRP:
Open terminal in TWRP from the Advanced button then enter this command:
dd if=/dev/block/bootdevice/by-name/ramdisk of=/external_sd/ramdisk.img
This will dump your stock ramdisk to external sd, which you then can patch in Magisk Manager and flash the output file to 'ramdisk' using fastboot. You will have to install Magisk Manager apk first though, it can be found in the Magisk thread.
davideakc said:
Do you have the guide for rooting RNE-L21, stock ROM, Android and EMUI version 8.0?
Click to expand...
Click to collapse
Only EMUI 8.x !!!
Your device must have an*unlocked bootloader.
Huawei HiSuite installed on your computer because it will install all the USB drivers
Download and install*Minimal ADB and fastboot Tool*on your computer. The folder location should be C:\Program Files(x86)\Minimal ADB and fastboot.
https://www.the***********.com/minimal-adb-and-fastboot-tool-for-windows/
Download*TWRP-oreo-smart.img*file
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
Copy the downloaded* TWRP file to the*Minimal ADB and fastboot folder.
Enable OEM unlocking on your phone (developer options) and USB debugging mode.
Now launch MAF32.exe (or cmd-here) file from the Minimal ADB and fastboot folder, a command window will open up.
Turn off your phone and connect to your PC. Reboot to fastboot mode using button combination Power and Volume down.
In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery_ramdisk TWRP-oreo-smart.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button combination Power and Volume Up or command*
adb reboot recovery
Download and copy to SD card latest Magisk.zip.
Boot your phone into TWRP,* in TWRP main menu tap 'Install', then navigate to the*Magisk.zip , tap it, then ‘Swipe to confirm Flash’.*
When the process is complete, tap Reboot System.
Enjoy !*
bozka1 said:
Only EMUI 8.x !!!
Your device must have an*unlocked bootloader.
Huawei HiSuite installed on your computer because it will install all the USB drivers
Download and install*Minimal ADB and fastboot Tool*on your computer. The folder location should be C:\Program Files(x86)\Minimal ADB and fastboot.
https://www.the***********.com/minimal-adb-and-fastboot-tool-for-windows/
Download*TWRP-oreo-smart.img*file
https://mega.nz/#!ot8TGIIa!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
Copy the downloaded* TWRP file to the*Minimal ADB and fastboot folder.
Enable OEM unlocking on your phone (developer options) and USB debugging mode.
Now launch MAF32.exe (or cmd-here) file from the Minimal ADB and fastboot folder, a command window will open up.
Turn off your phone and connect to your PC. Reboot to fastboot mode using button combination Power and Volume down.
In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery_ramdisk TWRP-oreo-smart.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button combination Power and Volume Up or command*
adb reboot recovery
Download and copy to SD card latest Magisk.zip.
Boot your phone into TWRP,* in TWRP main menu tap 'Install', then navigate to the*Magisk.zip , tap it, then ‘Swipe to confirm Flash’.*
When the process is complete, tap Reboot System.
Enjoy !*
Click to expand...
Click to collapse
If I do this, I lost all apps and data or not?
davideakc said:
If I do this, I lost all apps and data or not?
Click to expand...
Click to collapse
No you won't, but you should always backup your data.
AztekSoul said:
No you won't, but you should always backup your data.
Click to expand...
Click to collapse
And after flashing that TWRP can I still install Huawei updates like security patches etc... even if I don't have stock recovery?
davideakc said:
And after flashing that TWRP can I still install Huawei updates like security patches etc... even if I don't have stock recovery?
Click to expand...
Click to collapse
Yes you can, although you have to download updates through firmware finder and update with HuRUpdater in twrp.
davideakc said:
And after flashing that TWRP can I still install Huawei updates like security patches etc... even if I don't have stock recovery?
Click to expand...
Click to collapse
Then there is another solution - install TWRP over eRecovery (my own experience) :
- copy to SD card TWRP-oreo-smart.img
- in main TWRP menu tap Install image, then navigate
to the TWRP-oreo-smart, select
eRecovery_ramdisk and confirm Flash . System
reboot.
- Download and copy to the Minimal ADB and fastboot folder RECOVERY_RAMDISK330.img
https://mega.nz/#!I511VK4b!9cGodiCORHOvXndOCHyqcezpHmUk2zeTslqpbZe8pk4
Connect your phone to PC in fastboot mode and install recovery_ramdisk using command
- fastboot flash recovery_ramdisk RECOVERY_RAMDISK330.img
- fastboot reboot
How to boot into TWRP: reboot your phone and press Volume Up key up to 3 seconds to enter TWRP.
bozka1 said:
Then there is another solution - install TWRP over eRecovery (my own experience) :
- copy to SD card TWRP-oreo-smart.img
- in main TWRP menu tap Install image, then navigate
to the TWRP-oreo-smart, select
eRecovery_ramdisk and confirm Flash . System
reboot.
- Download and copy to the Minimal ADB and fastboot folder RECOVERY_RAMDISK330.img
https://mega.nz/#!I511VK4b!9cGodiCORHOvXndOCHyqcezpHmUk2zeTslqpbZe8pk4
Connect your phone to PC in fastboot mode and install recovery_ramdisk using command
- fastboot flash recovery_ramdisk RECOVERY_RAMDISK330.img
- fastboot reboot
How to boot into TWRP: reboot your phone and press Volume Up key up to 3 seconds to enter TWRP.
Click to expand...
Click to collapse
After that, how can I restore factory eRecovery?
davideakc said:
After that, how can I restore factory eRecovery?
Click to expand...
Click to collapse
Okay, one can install Magisk without TWRP. There are plenty of guides on how to do these things in the Mate 10 forums. Of course, TWRP makes things easier ....
Hello guys , [ UPDATE ROOT for EMUI 9.1.0.210 .. at bottom ... there are some minor changes]
been reading here and there for a working root but didn't work and my worries to get phone locked / bricked / bootloop
was increasing at any failed test !
THIS method WILL WORK i tested it today and worked ! I'm gonna upload also my magisk recovery_ramdisk PATCHED (read later) so you can skip few steps !
let's start
(steps are copied by Athanatos81 post here in XDA that's basically what i applied with some minor changes )
I. Rooting your device
1. be sure ADB / fasboot are working on your pc(drivers) and smartphone - INSTALL magisk manager Magisk Manager
2. Download the patched file for your device and copy it to Minimal ADB & Fastboot folder.
( you can use my magisk recovery_ramdisk PATCHED it's created by using update.app from update.zip file of EMUI BUILD 9.0.1.175(C432E3R1P5)
that means IF you are on emui 9.0.1 with THAT BUILD NUMBER you can use it ... if you are on a different build DO NOT use it, I take no responsabilities !!!
link to magisk recovery_ramdisk PATCHED magisk recovery_ramdisk PATCHED magisk_patched_9_0_1_175.img
3. Start your smartphone in fastboot mode pressing [Vol-]+[Power] and connect it to your PC. ( you can NOT enter fastboot? read in next section)
4. Open a Powershell and check if your honor 8 pro is listed by writing :
Code:
fastboot devices
you should see something like BYJDU17803000088 fastboot
that means your phone in correctly in fastboot/connected
5. Flash the Recovery_Ramdisk:
Code:
fastboot flash recovery_ramdisk magisk_patched.img
(in this case MY ALREADY MADE magisk recovery_ramdisk patched is named like that IF you choose a different name that CHANGE it also in the command)
when the process is complete (you'll get something like this
OKAY [ 0.184s]
finished. total time: 0.879s)
you need to REBOOT follow these next steps as i describe them or it won't work :
6. from your pc command window write
Code:
fastboot reboot
as soon as phone reboot
- remove usb cable
- PRESS and HOLD DOWN " volume up " VOL+ , keep it pressed until you see HONOR text (blue screen)
doing this will INSTALL MAGISK
7. your phone boot regularly(hopefully) now open Magisk Manager
you will see MAGISK 19.x.x.
and MAGISK 7.3.2
click on INSTALL (magisk 19.3) --- INSTALL ---- DIRECT INSTALL
when it's done it'll ask you to reboot , click reboot
phone is rooted !!!!!
i hope it helps for any references have a look at these pages which helped me :
root emui 9
magisk download
Magisk info
ROOT EMUI 9.1.0.210
first of all thank you to @OldDroid and @Athanatos81 for support ...
DOWNLOAD my patched magisk: PATCHED Magisk recovery 9.1.0.210
I'll descrive here the process how to update and root from 9.0.1.175 to 9.1.0.210
in my case i was on emui 9.0.1.175 rooted and i couldn't enter recovery or fastboot or simply update through system update !
so before starting it go in system settings -> update and DOWNLOAD your update
when you end your download don't restart and update BUT enter in fastboot:
to enter fastboot i had to restart honor 8 pro (while connected to usb)
and keep pressing VOL DOWN
now in fastboot you'll do following steps
(to install official update YOU FIRST NEED to install stock recovery so in this case 9.0.1.175 stock recovery .. while if you just need root on your actual rom you can just use the patched magisk recovery)
check if your smartphone is seen
fastboot devices
now
fastboot flash recovery_ramdisk magisk_patched_9_1_0_210.img ( in this case is the one i already patched for you )
fastboot reboot
let system start and than use ADB
adb reboot recovery
system will restart now open magisk manager
INSTALL MAGISK( in my case v20.1 )
INSTALL direct
reboot when asked
congratulations your Emui 9.1 is rooted !!!
Work with 9.1 ?
probably... I still didn't uodst though (going soon in holidays I don't wanna mess up with it lol)
Kyouck said:
Work with 9.1 ?
Click to expand...
Click to collapse
Sent from my DUK-L09 using Tapatalk
Kyouck said:
Work with 9.1 ?
Click to expand...
Click to collapse
IT WORKS !!!!!!!!! just tried it ! there are some minor changes .. i'm gonna explain what to do
IF you have problem with ADAWAY ( not enough space or something similar )
OPEN MAGISK manager
SETTINGS
click over SYSTEMLESS HOSTS
and now reboot
open again Adaway and it'll be working
IF YOU HAVE PROBLEMS with SMS app crashing ( you can't receive/send sms ) follow this and it'll work again
https://forum.xda-developers.com/mate-10/how-to/fix-messages-dialer-9-1-root-required-t3955964#post80777289
just another important update :
if you have got (probably you did "system settings update") read this:
I've got that "system update settings" on my honor 8 Pro and guess what? I've lost magisk root... so I need to do procedure again.. unbelievable but that is it! I found out cause I started to see annoying advertising and I checked adaway and "no root"
Sent from my DUK-L09 using Tapatalk
simika said:
IT WORKS !!!!!!!!! just tried it ! there are some minor changes .. i'm gonna explain what to do
Click to expand...
Click to collapse
Code: fastbood devices is not work in my phone. im not can start fastboot mode
StaBar said:
Code: fastbood devices is not work in my phone. im not can start fastboot mode
Click to expand...
Click to collapse
connect the phone to pc, keep "vol-" pressed directly after pressing restart on the phone, it should enter fastboot now.
I had same problem.. doing that it'll enter fastboot
Sent from my DUK-L09 using Tapatalk
I need the patched files
I need the patched magisk files guys please the links provided on top aren't working
Hello this will work without unlocking bootloader? Also the links above are not working. I am on 9.1.0.212, can I use your 9.1.0.210 patch file? Thanks.
I'm on 9.1.0.212.. Please tell me how to root this.. Plzzz
Updated magisk_patched_9_1_0_210.img - Magisk v20.4 included , added also the original RECOVERY_RAMDISK extracted from 9.1.0.210.
magisk_patched_9_1_0_210.img md5sum = fa2b59807eac66e128653eaebc433aa3
RECOVERY_RAMDISK_9_1_0_210.img md5sum = c62ac7fdc55cb535d1b627b8f17f1842
Will the steps for flashing be same as given in OP?
Thanks...
panijsr said:
Will the steps for flashing be same as given in OP?
Thanks...
Click to expand...
Click to collapse
yes and take the latest magisk manager from the official magisk page
nanortemis said:
Updated magisk_patched_9_1_0_210.img - Magisk v20.4 included , added also the original RECOVERY_RAMDISK extracted from 9.1.0.210.
magisk_patched_9_1_0_210.img md5sum = fa2b59807eac66e128653eaebc433aa3
RECOVERY_RAMDISK_9_1_0_210.img md5sum = c62ac7fdc55cb535d1b627b8f17f1842
Click to expand...
Click to collapse
Bro which file to flash from this two.. actually I flashed magisk patched file and it worked fine with magisk installed but then I tried custom rom and it didn't work so flashed stock rom again and lost root access so I did same step but this time magisk isn't installing and not giving root access.. idk what's wrong can you please help?
Please help me root this version
RECOVERY_RAMDISK_9_1_0_230.img & magisk_patched_9_1_0_230.img ?? Where can be found ?
gazon9 said:
Please help me root this version
RECOVERY_RAMDISK_9_1_0_230.img & magisk_patched_9_1_0_230.img ?? Where can be found ?
Click to expand...
Click to collapse
Honor V9 Guides, News, & Discussion
Use this forum to find the best how-to guides for the Honor V9 and discover the latest news. General discussion also goes here.
forum.xda-developers.com
your screenshot shows honor v9 not honor 8 pro
simika said:
Hello guys , [ UPDATE ROOT for EMUI 9.1.0.210 .. at bottom ... there are some minor changes]
been reading here and there for a working root but didn't work and my worries to get phone locked / bricked / bootloop
was increasing at any failed test !
THIS method WILL WORK i tested it today and worked ! I'm gonna upload also my magisk recovery_ramdisk PATCHED (read later) so you can skip few steps !
let's start
(steps are copied by Athanatos81 post here in XDA that's basically what i applied with some minor changes )
I. Rooting your device
1. be sure ADB / fasboot are working on your pc(drivers) and smartphone - INSTALL magisk manager Magisk Manager
2. Download the patched file for your device and copy it to Minimal ADB & Fastboot folder.
( you can use my magisk recovery_ramdisk PATCHED it's created by using update.app from update.zip file of EMUI BUILD 9.0.1.175(C432E3R1P5)
that means IF you are on emui 9.0.1 with THAT BUILD NUMBER you can use it ... if you are on a different build DO NOT use it, I take no responsabilities !!!
link to magisk recovery_ramdisk PATCHED magisk recovery_ramdisk PATCHED magisk_patched_9_0_1_175.img
3. Start your smartphone in fastboot mode pressing [Vol-]+[Power] and connect it to your PC. ( you can NOT enter fastboot? read in next section)
4. Open a Powershell and check if your honor 8 pro is listed by writing :
Code:
fastboot devices
you should see something like BYJDU17803000088 fastboot
that means your phone in correctly in fastboot/connected
5. Flash the Recovery_Ramdisk:
Code:
fastboot flash recovery_ramdisk magisk_patched.img
(in this case MY ALREADY MADE magisk recovery_ramdisk patched is named like that IF you choose a different name that CHANGE it also in the command)
when the process is complete (you'll get something like this
OKAY [ 0.184s]
finished. total time: 0.879s)
you need to REBOOT follow these next steps as i describe them or it won't work :
6. from your pc command window write
Code:
fastboot reboot
as soon as phone reboot
- remove usb cable
- PRESS and HOLD DOWN " volume up " VOL+ , keep it pressed until you see HONOR text (blue screen)
doing this will INSTALL MAGISK
7. your phone boot regularly(hopefully) now open Magisk Manager
you will see MAGISK 19.x.x.
and MAGISK 7.3.2
click on INSTALL (magisk 19.3) --- INSTALL ---- DIRECT INSTALL
when it's done it'll ask you to reboot , click reboot
phone is rooted !!!!!
i hope it helps for any references have a look at these pages which helped me :
root emui 9
magisk download
Magisk info
ROOT EMUI 9.1.0.210
first of all thank you to @OldDroid and @Athanatos81 for support ...
DOWNLOAD my patched magisk: PATCHED Magisk recovery 9.1.0.210
I'll descrive here the process how to update and root from 9.0.1.175 to 9.1.0.210
in my case i was on emui 9.0.1.175 rooted and i couldn't enter recovery or fastboot or simply update through system update !
so before starting it go in system settings -> update and DOWNLOAD your update
when you end your download don't restart and update BUT enter in fastboot:
to enter fastboot i had to restart honor 8 pro (while connected to usb)
and keep pressing VOL DOWN
now in fastboot you'll do following steps
(to install official update YOU FIRST NEED to install stock recovery so in this case 9.0.1.175 stock recovery .. while if you just need root on your actual rom you can just use the patched magisk recovery)
check if your smartphone is seen
fastboot devices
now
fastboot flash recovery_ramdisk magisk_patched_9_1_0_210.img ( in this case is the one i already patched for you )
fastboot reboot
let system start and than use ADB
adb reboot recovery
system will restart now open magisk manager
INSTALL MAGISK( in my case v20.1 )
INSTALL direct
reboot when asked
congratulations your Emui 9.1 is rooted !!!
Click to expand...
Click to collapse
please upload again the patched 9.1.0.212 .img file, thank you!
currently I'm trying to download stock firmware Indian variant 9.1.0.212(C675E7R1P6) so that I can extract update zip and pick stock recovery_ramdisk.img file to patch with Magisk and use fastboot flash method after it is patched. please let me know if there is something I'm missing or doing wrong. I urgently need some lost files last month. very urgent matter. plz help me if you can
Thankk you....!!! I can not explain how happy I am. God Bless you
nanortemis said:
Updated magisk_patched_9_1_0_210.img - Magisk v20.4 included , added also the original RECOVERY_RAMDISK extracted from 9.1.0.210.
magisk_patched_9_1_0_210.img md5sum = fa2b59807eac66e128653eaebc433aa3
RECOVERY_RAMDISK_9_1_0_210.img md5sum = c62ac7fdc55cb535d1b627b8f17f1842
Click to expand...
Click to collapse
It still works on my EMUI 9.1.0.210 C636.
Follow the instruction on the second half of the original post, and then download these files from the link by nanortemis.
1. Put the device into fastboot mode by connecting the USB cable to the PC and long press "Vol -" button
2. Install adb, and run
fastboot flash recovery_ramdisk magisk_patched_9_1_0_210.img
fasboot reboot
3. boot into the device, and then open the magisk app, you shall see a pop-up asking for reboot again, click on ok.
4. reboot... and yeap... you're rooted.