Database Users

[Firmware][GT-N7000][4.2.1] CyanogenMod 10.1 unofficial builds // discussion thread

Text of original post shamelessly kanged from codeworkx and edited to be appropriate for N7000. Some links may still go to I9100 stuff. If you can't figure out replacements on your own for links that go the wrong place, you shouldn't be here.
DO NOT POST UNTIL YOU HAVE READ THE FIRST FOUR POSTS OF THIS THREAD IN THEIR ENTIRETY.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
- There are bugs and we know them all. Don't try to report bugs or complain about. We'll blacklist you.
- No, we don't accept feature request. We've enough work to do with fixing bugs.
- Don't ask for changelogs!
- Never ask for new builds!
- Use it or leave it!
- Don't create a ROM based upon this! Creating a ROM on a buggy and unstable base is a stupid idea!
- kkthxbye
- UI: Apps like NHK are broken
- Audio: bugs, missing features
- Camera: Recording partially broken
- FM Radio: unsupported
- TV Out: unsupported, not likely to ever work (there is small hope now but not much)
- Lots of missing and yet unimplemented features
- and a lot more
First time installing CyanogenMod 10.1 to your Galaxy S II, or coming from another ROM:
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG. If you're unsure, flash this ClockworkMod-Recovery using Odin/Heimdall.
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM10.1 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Reboot
CM10.1 unofficial builds:
20121212: http://d-h.st/u13
Google Apps:
http://goo.im/gapps
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant without respect!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots kanged straight from codeworkx. Seriously, it's CM, the screenshots will look almost identical on all phones
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!

Things definitely broken
In addition to the stuff in OP from codeworkx:
Wifi tethering doesn't work - Bluetooth tethering does
HWComposer barely works - passes vsync and not much else. Run NHK World Live TV app and you'll see why it's broken
Lots of core non-device specific CM features are not yet reimplemented. This includes stylus gesture support, palm rejection, and control of stylus hover icon.
Camera doesn't appear on lockscreen - and it will not appear at all with many gapps packages
Audio HAL isn't fully reimplemented - no dock audio, etc.
Bluetooth SCO (calls) is busted and bluedroid spits out all sorts of bluetooth sleep control errors. We probably need to rework power management from the current mechanisms.

Misc other stuff
The holidays are coming up here in the USA. I have family visiting this weekend, and will be visiting my parents for a week the following week. I have a lot of preparation to do and my laptop can't build CM, so don't expect much to happen until the new year.

Expected 4.2 features you won't see
Some of the more well known features of 4.2 are in proprietary Google apps and libraries not part of AOSP. In addition they do device checks to make sure they're running on a Nexus. These include, at a minimum:
Photosphere - There are hacked versions without device checks floating around, but expect problems just like anyone else who has replaced CM camera/gallery with gapps camera/gallery APKs. Don't post here if you install these and have issues.
"swype" style keyboard - Also proprietary and not part of AOSP

12-12-12
Let's roll on !
And happy holidays Entropy and other xda members.

Just awesome!!!

fantastic..! thanx mate
Sent from my GT-N7000 using Tapatalk 2

Entropy, I think most of us are glad to see you still here, brother. Glad to see you taking some time off, clear your head, enjoy your family and then, come back and bang your head on the proverbial exynos 4 wall some more Just know your work and the work of the other cm10 devs is greatly appreciated by many thanks, man.
Sent from my GT-N7000 using XDA Premium HD app

You're the Boss entropy512
Edit: good job CM. This ROM is so fast
Thanks
Wysyłane z mojego GT-N7000 za pomocą Tapatalk 2

Happy holidays all.
Ill try this after I read the first three posts again.
Thank you, your awesomeness
Sent from my HTC Desire using Tapatalk 2

Gud luck guys...

Just can't wait to go home and try this! Anybody installed this already? How is it running?
Sent from my GT-N7000 using xda app-developers app

I do like it for the time being very much, again a big thank you @Entropy512.
Installation went fine, restore via Play Store (via WiFi, works!)
Just installed it an hour ago, so I am about to explore the features...
*Concerning the camera missing on lockscreen- it can be added via lock screen feature in the settings menu. Just added it and it works fine (gapps 2012-11-30)
*Audio - no volume bug anymore! Nice.
*GPS lock - within a minute
*Quick settings (1 and 2 finger operations work) menu are gorgeous
*Theme chooser is integrated
My first impression...if it bothers anyone :thumbup:
Pre-christmas present powered by Team Hacksung ... Chapeau! Merci!
Edit video recorded @1080 works as well?!
Edit 2: 1 video recorded @1080 √ since then, no more! Gallery FCing. Damn. Okay...

AA1973 said:
I do like it for the time being very much, again a big thank you @Entropy512.
Installation went fine, restore via Play Store (via WiFi, works!)
Just installed it an hour ago, so I am about to explore the features...
*Concerning the camera missing on lockscreen- it can be added via lock screen feature in the settings menu. Just added it and it works fine (gapps 2012-11-30)
*Audio - no volume bug anymore! Nice.
*GPS lock - within a minute
*Quick settings (1 and 2 finger operations work) menu are gorgeous
*Theme chooser is integrated
My first impression...if it bothers anyone :thumbup:
Pre-christmas present powered by Team Hacksung ... Chapeau! Merci!
Edit video recorded @1080 works as well?!
Click to expand...
Click to collapse
is it smooth? i mean is it usable ?

For me it is usable, yes. But I have it up and running only for 2 hours, restoring apps via play store took some time (and other things to do ), I won't judge it any further. It feels smooth to me. As I never came in touch with other devices running JB with ("real") project butter, I can't compare. But I honestly do like it already!
BTW I don't use neither an audio dock nor any Bluetooth things, so I am not bothered

rilytan are
ritik.verma said:
is it smooth? i mean is it usable ?
Click to expand...
Click to collapse
Even though AA1973's comment seems really encouraging, I would not take these information as utterly true.
Indeed, Entropy clearly states that there are a lot of known bugs, and there's a high chance that we'll see "false positives" in the OS indicators.
Anyway, thanks a lot Entropy for your hard work, I think I can speak in the name of many of us when I say that I'm really excited at the idea of seeing CM 10.1 on the Note.
Happy holidays to you all.

AA1973 said:
I do like it for the time being very much, again a big thank you @Entropy512.
Installation went fine, restore via Play Store (via WiFi, works!)
Just installed it an hour ago, so I am about to explore the features...
*Concerning the camera missing on lockscreen- it can be added via lock screen feature in the settings menu. Just added it and it works fine (gapps 2012-11-30)
*Audio - no volume bug anymore! Nice.
*GPS lock - within a minute
*Quick settings (1 and 2 finger operations work) menu are gorgeous
*Theme chooser is integrated
My first impression...if it bothers anyone :thumbup:
Pre-christmas present powered by Team Hacksung ... Chapeau! Merci!
Edit video recorded @1080 works as well?!
Click to expand...
Click to collapse
I think you must be the lucky one with everything working....:angel: downloading now. Lets see if i can manage all those you mentioned....:fingers-crossed:
Thank you Entropy512....and CM team...

Testing without full wife. Till now everything is working fine. I only did: Wipe cache, wipe dalvick, install cm10.1, install gapps, Wipe cache, wipe dalvick.
Only photosphere not working. maybe because dirty install?
In the weekend I'm going to do a full wipe.
Good job Entropy.
Sent from my GT-N7000 using xda app-developers app

This made my year....
ANG.MAHAL.NG.NOTE.KO

Wooot.. Wooot.! Flashed it..!! its kickass..Smooth stable.. bugs.. Umm... i dint see for the time being 25 mins with me..
wifi works.. Cam works.. Video rec fc'd once but works well with Sound.. Lockscreen options can b used to select camera..!!
As mentioned.. one fingr and two fingr slide gestures are awwsome..!!
rest well i hv 70% battery to play with it..
Thanks aloooo entropy i ws looking forward to it..! happppy holidays..! :good:
Will b arnd too se and help in the progress..! :fingers-crossed:

[ROM][4.4.4]VanirAOSP[OFFICIAL][Galaxy Exhibit-SGH-T599X]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smooth like Butta
Follow on G+: Team Vanir
Vanir Team:
NuclearMistake
Sonicxml
DHO
PrimeDirective
Not all features are available yet.
Features:
Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..
What to expect:
- This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
- maximum optimization. We do our research. We test hard. We build -fstrict -O3 globally and include a massive array of code optimizations and memory leak fixes that we write ourselves and eventually submit to AOSP or Linaro.
- originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
- aesthetics.. hopefully in your opinion
General features:
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d.
UI and graphics improvements
custom navbar, navring, and hardware key features
improved notification handling (active display & halo are in review also)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
soon to come -> quick cam and flash notifications
busybox, embedded root, init.d, cron etc
yatta yatta yatta
more to come when i feel like updating the op
Changelog:
**Vanir Open Status
**Vanir Merged Status
Vanir Downloads (nuclearmistake):
**Nightlies
Recovery Downloads:
**TWRP 2.7
**CWM
Vanir Github:
**VanirAOSP Git
Gapps:
**4.4.2 PA Gapps
Installation Instructions
Make sure your using twrp above it's required
Full wipe
Install ROM
Install Gapps
Thanks
TeamVanir
Meticulus
Everyone here for keeping me inspired
Too many to thank. You know who you are who stood by since day 1

Reserved

Awesome Job Unjustified Dev! Another New Great ROM to add to the list. It's definitely smooth like butter! Thank you!
Sent from my SGH-T599X using XDA Premium 4 mobile app

Thanks for this ROM which someone can fix the BT audio in call but thanks I will use this one I like thanks again
Sent from my SGH-T599N using xda app-developers app

Tethering
Nice to see a few ROMs for the T599! I am testing on the T599 T-Mobile variant.
Maybe there is an issue with Bluetooth.
Bluetooth tethering is not working.
But, WiFi tethering is working fine. :good:

Installed smoothly once I updated CWM. Will post on how it goes from here.
ps That's a bad ass boot image lol
Edit: Not a fan of how you put Vanir over the space bar, but I guess it doesn't matter because I'm not going to be using the stock keyboard anyway.
Edit2: Phone seemed to turn off randomly in the middle of the night, other than that it's working great so far.
Edit3: The music app combined with DSP Manager is pretty neat. If the music is distorting, the music app will pause to avoid damaging your system.
Edit4: Screen recording completely freezes the phone.

Kennehisftw said:
Installed smoothly once I updated CWM. Will post on how it goes from here.
ps That's a bad ass boot image lol
Edit: Not a fan of how you put Vanir over the space bar, but I guess it doesn't matter because I'm not going to be using the stock keyboard anyway.
Edit2: Phone seemed to turn off randomly in the middle of the night, other than that it's working great so far.
Edit3: The music app combined with DSP Manager is pretty neat. If the music is distorting, the music app will pause to avoid damaging your system.
Edit4: Screen recording completely freezes the phone.
Click to expand...
Click to collapse
Screen recording doesn't work on these devices. I am removing the option that shows that to prevent device freezing.

I've redone the device tree and device is now codinalte. I made this change so that the assert checks won't allow flashing of older recoveries which would lead to device bootloops if used with the new j4fs and param setup.
Make sure you see the new instructions.
Changelog
-Used gcc 4.8 instead of 4.7 now that it's been tested.
-Removed all device asserts to prevent use of older recoveries.
-Disabled the use of screen record
-Switched device name to codinalte to cause less confusion with ace 2 users
-Upstream Vanir changes
-Philz cwm , cwm , and twrp now available for codinalte enabled builds only

Excellent ROM
Sent from my SGH-T599N using XDA Premium 4 mobile app

To everyone wondering this is the initial release of codinalte. I made this change to ensure everyone would be on the correct recovery and if you are on an older one it wouldn't let you install it . It would cause a bootloop due to the mismatch of j4fs and param module. This is the only way I can think of to ensure everyone is safe.

Unjustified Dev said:
To everyone wondering this is the initial release of codinalte. I made this change to ensure everyone would be on the correct recovery and if you are on an older one it wouldn't let you install it . It would cause a bootloop due to the mismatch of j4fs and param module. This is the only way I can think of to ensure everyone is safe.
Click to expand...
Click to collapse
What bugs does this have other than the Bluetooth audio? Same as Omni Rom?

Cogra147 said:
What bugs does this have other than the Bluetooth audio? Same as Omni Rom?
Click to expand...
Click to collapse
Yes , we should all have the same bugs. The only ones that will make a difference are rom specific issues.

Unjustified Dev said:
Yes , we should all have the same bugs. The only ones that will make a difference are rom specific issues.
Click to expand...
Click to collapse
Here are some bugs I'd experienced recently with VanirAOSP ROM latest build.
1. Last night I had set my alarm clock to wake up this morning but the alarm didn't go off because I found my phone shutdown or powered off. Apparently the randomly shutdown in the middle of the night.
2. Yesterday I had two occasions where my Network was lost completely. I had to reboot the phone to get it back.
3. I noticed that when I receive a call or make a call the volume sounds like is half way down. I always have my volume set all the way up. When someone calls me I have to hit the volume down one or twice and then back up to fix the loudness of the call. Something is not right.
4. I noticed that when ever I play and embedded YouTube Video whether in a Browser of any kind or an RSS Reader it FCs the application before the video starts. All the time. Here is an example. I recorder this LogCat for you....https://www.dropbox.com/s/aaf7wgywrf66b7a/2014-03-17-14-15-24.txt I try playing a YouTube video on this website.. http://sploid.gizmodo.com/here-are-7-facts-about-superheroes-you-probably-didnt-1541767101 on the AOSP Browser and same thing happens with other Browsers and apps with YouTube Video embedded in them.
Sent from my SGH-T599N using XDA Premium 4 mobile app

DJVargas said:
Here are some bugs I'd experienced recently with VanirAOSP ROM latest build.
1. Last night I had set my alarm clock to wake up this morning but the alarm didn't go off because I found my phone shutdown or powered off. Apparently the randomly shutdown in the middle of the night.
2. Yesterday I had two occasions where my Network was lost completely. I had to reboot the phone to get it back.
3. I noticed that when I receive a call or make a call the volume sounds like is half way down. I always have my volume set all the way up. When someone calls me I have to hit the volume down one or twice and then back up to fix the loudness of the call. Something is not right.
4. I noticed that when ever I play and embedded YouTube Video whether in a Browser of any kind or an RSS Reader it FCs the application before the video starts. All the time. Here is an example. I recorder this LogCat for you....https://www.dropbox.com/s/aaf7wgywrf66b7a/2014-03-17-14-15-24.txt I try playing a YouTube video on this website.. http://sploid.gizmodo.com/here-are-7-facts-about-superheroes-you-probably-didnt-1541767101 on the AOSP Browser and same thing happens with other Browsers and apps with YouTube Video embedded in them.
Sent from my SGH-T599N using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You could try this for low call fix http://forum.xda-developers.com/showthread.php?t=2676518
Use the onlyincallfix.apk it should work to fix volume please confirm this.
The video problem is due to the patches we used not supporting a certain function required for the video playing. The phone randomly dying is something i know nothing about as of yet.

Does it work on the international version and does it have random reboots like in the latest CM11?

LMH1998 said:
Does it work on the international version and does it have random reboots like in the latest CM11?
Click to expand...
Click to collapse
This is not for s3 mini. Please wait some time for me do a test build. I don't have the s3 mini but it's a similar device. If you want I can send you a pm of the test build. Please continue this conversation in a private message.

Phone died overnight even though on charger. I believe its the performance function. Installed voltage control. Still testing. Will post results.
Sent From DWil's Magic Carpet t599n

wilbigdaddy2000 said:
Phone died overnight even though on charger. I believe its the performance function. Installed voltage control. Still testing. Will post results.
Sent From DWil's Magic Carpet t599n
Click to expand...
Click to collapse
I am looking into it. I haven't noticed why it did that yet. I can add back dvfs limit if you think it's the voltage. Basically you won't be able to use performance control it will stay at 0 for min and max.

Unjustified Dev said:
I am looking into it. I haven't noticed why it did that yet. I can add back dvfs limit if you think it's the voltage. Basically you won't be able to use performance control it will stay at 0 for min and max.
Click to expand...
Click to collapse
wilbigdaddy2000 said:
Phone died overnight even though on charger. I believe its the performance function. Installed voltage control. Still testing. Will post results.
Sent From DWil's Magic Carpet t599n
Click to expand...
Click to collapse
The same thing happened to me, but while running Beanstalk. I have been running Vanir for the past few days and I have not seen any issues with FC or reboot yet. Battery life appears to be excellent, lasting 48 + hours with light use.
I am running the T-Mobile variant.

Android M is coming tomorrow to an i9000 near you!

OK,
so i thought I would let everyone know tomorrow I will release the first M release for i9000, the reason I waited so long is because I felt it was pointless to release something that was barley working, now keep in mind there are still many stuff still to fix but its a great achievement after weeks of work which I would like to share with you.
So the first ROM will be OMNI, and before you all go crazy and say "you promised CM", It may come later but right now CM is so bloated its not worth it, I got it running but its slow as hell and has more work to do to bring it up.
Omni is usable but don't expect 5.1.1 performance, even using the overclocked kernel its pretty damn slow with the google framework.
Anyway here is the current progress:
Fully Working:
* Wifi
* RIL
* Sensors
* Audio
Unknown/half-baked:
* GPS (I'm not sure, I think it needs a few updates so don't count on it)
* BT (it turn on and connects but sometimes disconnects itself, anyway its 50% done)
* Camera (doesn't work using aosp app, works on 3rd party apps but for some reason rotation doesn't always work)
* Storage works but since we can't emulate partitions yet we only can used the shared data partition so no access to the full storage only 1.5GB or so, I will fix it once I figure out how to apply LVM to android M
Notes: I created a special gapps since system partition is too small even for omni and a pico gapps, it removes some apps that can be downloaded via play store such as browser and camera.
Also keep in mind its pretty sluggish at times, memory is used 100% of the time and zRAM is pretty slow
I will upload the package tomorrow.
On a side note: I used a special dedicated server with high speed internet to sync and push commits, I can't afford it myself anymore, its only $50 a month but sadly its too much for me, if I don't renew it by the 2, they will close me down and I will need to work on my home PC which is much slower and will take longer to compile, if anyone can donate anything it would help. I also spent $50 on this phone (I own a LG G3 as my main device) just to show you how much I want to help everyone out. its a fun hobby
Anyway feel free to comment.
Screenshot bellow
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Deleted.

Amazing!!!

Ok, I will try Optimize
A-6.0.0 in coming

sooti said:
OK,
Unknown/half-baked:
* GPS (I'm not sure, I think it needs a few updates so don't count on it)
* BT (it turn on and connects but sometimes disconnects itself, anyway its 50% done)
* Camera (doesn't work using aosp app, works on 3rd party apps but for some reason rotation doesn't always work)
* Storage works but since we can't emulate partitions yet we only can used the shared data partition so no access to the full storage only 1.5GB or so, I will fix it once I figure out how to apply LVM to android M
Click to expand...
Click to collapse
Not sure exactly your sources, but with bluetooth you probably want to modify bdroid_buildcfg.h in device/samsung/galaxysmtd and disable BLE, GATT, and SMP from the bluetooth stack. To fix compilation issues, you will then need to apply Dmitry Grindberg's system/bt patch.
For the insufficient storage for gapps problem, you could try modifying the updater.sh and changing the SYSTEM_SIZE declaration near the top to something larger. Note that this does take away from /data. You could also try disabling DEX_PREOPT if you haven't already.
Did you get selinux working, even in permissive mode? If so, then I could probably help with creating the proper policies to set it to enforcing.
Anyways, thanks for all your work!

xc-racer99 said:
Not sure exactly your sources, but with bluetooth you probably want to modify bdroid_buildcfg.h in device/samsung/galaxysmtd and disable BLE, GATT, and SMP from the bluetooth stack. To fix compilation issues, you will then need to apply Dmitry Grindberg's system/bt patch.
For the insufficient storage for gapps problem, you could try modifying the updater.sh and changing the SYSTEM_SIZE declaration near the top to something larger. Note that this does take away from /data. You could also try disabling DEX_PREOPT if you haven't already.
Did you get selinux working, even in permissive mode? If so, then I could probably help with creating the proper policies to set it to enforcing.
Anyways, thanks for all your work!
Click to expand...
Click to collapse
Hey, regarding BT, it compiles fine, and turns on fine, i can connect to other devices, but sometimes get disconnections, in short its just not 100% stable
storage i'll look into it, thanks for the tip.
selinux is disabled right now, if you want to help me with se policies that would be great, i can probably do it myself but help would be great.
What wo;; DEX_PREOPT do?
big question is how to get it running smoother, even using commits from your kernel for OC its still slow as hell with gapps...

sooti said:
Hey, regarding BT, it compiles fine, and turns on fine, i can connect to other devices, but sometimes get disconnections, in short its just not 100% stable
storage i'll look into it, thanks for the tip.
selinux is disabled right now, if you want to help me with se policies that would be great, i can probably do it myself but help would be great.
What wo;; DEX_PREOPT do?
big question is how to get it running smoother, even using commits from your kernel for OC its still slow as hell with gapps...
Click to expand...
Click to collapse
DEX_PREOPT basically pre-compiles the system apps for ART. You can read more about it at https://source.android.com/devices/tech/dalvik/configure.html. It speeds up the first boot significantly at the trade-off for storage space. We have it enabled in BoardConfigCommon.mk
For the BT bit, when I first brought up my variant to Omni5.1 I didn't have those bits disabled and I got similar random disconnections, etc so I figured it might be a similar problem (plus on the CM13 branch on your github you have them enabled).
With selinux, where is it disabled? l couldn't get anything to boot if I had selinux enabled in the defconfig, but when I disabled selinx (as you have in the android-6.0 branch of your kernel) then things started booting.
And I have no idea how to get it running smoother....

xc-racer99 said:
DEX_PREOPT basically pre-compiles the system apps for ART. You can read more about it at https://source.android.com/devices/tech/dalvik/configure.html. It speeds up the first boot significantly at the trade-off for storage space. We have it enabled in BoardConfigCommon.mk
For the BT bit, when I first brought up my variant to Omni5.1 I didn't have those bits disabled and I got similar random disconnections, etc so I figured it might be a similar problem (plus on the CM13 branch on your github you have them enabled).
With selinux, where is it disabled? l couldn't get anything to boot if I had selinux enabled in the defconfig, but when I disabled selinx (as you have in the android-6.0 branch of your kernel) then things started booting.
And I have no idea how to get it running smoother....
Click to expand...
Click to collapse
I'll look into the bt, selinux is disabled in kernel
https://github.com/lollipopi9000/android_kernel_samsung_aries/commit/c1d925aeca5af739206df44f742ddb0d32ab6d3e

Your Bulid 6.0.0 support init.d ?

dracov76 said:
Your Bulid 6.0.0 support init.d ?
Click to expand...
Click to collapse
No idea...

Not ready??

althafvly said:
Not ready??
Click to expand...
Click to collapse
Almost, since I couldn't offord my build server I set up build on my local pc and its slow and has issues, hopefully in a few hours ill post it

i use on my old hp touchpad the new marshmallow version from flintman and it it's faster then the old 5.1.1 version. Perhaps you can ask him to improve the speed.

Trainer_H said:
i use on my old hp touchpad the new marshmallow version from flintman and it it's faster then the old 5.1.1 version. Perhaps you can ask him to improve the speed.
Click to expand...
Click to collapse
HP touchpad has 1GB of ram, that will work ok on 6.0, the i9000 has 512MB which 380MB are used for actual OS use, so you really are pushing the limit, i'll look into it in any case.
Also, official thread is up in development forum, I'm uploading the build now

Thanks God it's not CM. Please, not CM. Always that damn CM! Why? It is good, yes, but usually more laggy than others.

OmniROM 6.0 (Android M) v. ALPHA 2
When does the update do? Can not wait. Thank you
:good:

for I9000
Will it be capable of handling the firmware?
---------- Post added at 05:38 AM ---------- Previous post was at 05:37 AM ----------
abc_sk2002 said:
Will it be capable of handling the firmware?
Click to expand...
Click to collapse
not able to believe....

[ROM][12.1][LAUREL_SPROUT] PixelPlusUI [OFFICIAL] [Twelve][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
PixelPlusUI is another aftermarket AOSP ROM Minimal UI & close to Stock Android ROM. What differentiates us from the rest, you ask? LET'S FIND OUT. It has additional localized and personalized functionality while preserving the stock Android look by adhering to Material Design guidelines. Unlike OEMs' slow and untimely updates, we closely follow Google to bring the latest updates to our users, and even prolonging support to devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience using PixelPlusUI will be butter smooth with added convenience and features. The main aim of this form is to give the user a better experience without compromising the quality of the Android experience so that no one struggles with any kind of difficulties while using their device. PixelPlusUI brings a better UI/UX to Android with a seamless experience coupled with customizations and user security. In short, it's perfectly balanced between Great Performance, Security, Stability, Minimal UI & Awesome features including pixel goodies But this doesn't mean we aim to provide all the customization available on the planet. So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy PixelPlusUI on your respective devices!
- Kostya Maslennikov - Founder
- Saurav - Co-Founder & Co-lead
- Hamza - Core Developer & Team
- Abhishek - Support Team
- And Also Our Hardworking Maintainers
// Checkout the latest changes you get //
Latest Changelog: https://ppui.site/changelog
// A screenshot is worth of thousand words //
Latest Screenshots : https://ppui.site/gallery
NOTE : Well here you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- Official Download Server ! ---------
Note: You can check our Website for more details, guides , changelog etc related to build !
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
-- Visit our OFFICIAL Website
-- OUR OFFICIAL TWITTER HANDLE --
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH :
- Download the latest build
- Take a backup, using Swift Backup
- Reboot to recovery.
- Format Data
- Flash the latest build
- Flash Recovery LineageOS by Magicxavi
- Reboot to recovery
- Reboot
DIRTY FLASH :
- Download the latest build
- Take a backup, using Swift Backup
- Reboot to recovery
- Flash the latest build
- Flash Recovery LineageOS by Magicxavi
- Reboot to recovery
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work?
Nothing yet
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton-AOSP
- AOSPA
- Others, I forgot to mention
PixelPlusUI XDA Templates credit goes to
- GOUSAL TONI
- Android OS version: 12.1
- Security patch: August 2022
- Build author/Device Maintainer : <VitorSSSouzaBR>
- DEVICE: <Xiaomi Mi A3>
- DEVICE CODENAME: <laurel_sprout>
Sources and Documentation
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
// Giving little CAN HELP A LOT //
- As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student.
- Do consider donating on Patreon for sustainable support and rewards or buying me a coffee if you want to appriciate our work.
- Thank you for your support !
​

I installed this ROM and currently only have one complaint. Vibration is off for Gboard, the virtual navigation buttons, the fingerprint scanner, and pattern unlock. This is regardless of what I set under Settings > Sound & Vibration.
Vibration is working fine for notifications and calls. It's just the haptics that aren't working for me.
incidentally, is there a Gcam version recommended for this ROM?

i've been using this rom for like 3 days and i love it !
it has all the features i'd expect from ppui.
one feature i kinda missed is disabling annoying notifications (meaning making all notifications silent while screen is on)
also can i use a custom kernel on top of this ?

Hello, does it work with android auto (phone call with car speaker, navigation and so on)?

Edited

The ROM works great! It's currently the best one for our phone.

[BUG]
Your rom does not work with AndroidAuto, i cannot answer/make call because when the call starts i cannot listen from the car, i can listen from the phone speaker, the menù on the car display says bluetooth but the phone use its own speaker.
The bluetooth remain connected in the phonr when i turn off the car, after several time the phone "think" that is connected to the car, and i cannot do calls, until i turn manually off the bluetooth.
Is there something to do/try?
Thanks

Rom is great. Only thing that is annoying 8s that usual random a12 bug where I can't here the other person on apps like Viber or whatsapp

Zergrinch said:
I installed this ROM and currently only have one complaint. Vibration is off for Gboard, the virtual navigation buttons, the fingerprint scanner, and pattern unlock. This is regardless of what I set under Settings > Sound & Vibration.
Vibration is working fine for notifications and calls. It's just the haptics that aren't working for me.
incidentally, is there a Gcam version recommended for this ROM?
Click to expand...
Click to collapse
For me it is working perfectly, I recommend you to join the device support group

mjdmjd86 said:
i've been using this rom for like 3 days and i love it !
it has all the features i'd expect from ppui.
one feature i kinda missed is disabling annoying notifications (meaning making all notifications silent while screen is on)
also can i use a custom kernel on top of this ?
Click to expand...
Click to collapse
Yes, but if there is a bug after installing a custom kernel, don't look for me to report bugs

lospo said:
Hello, does it work with android auto (phone call with car speaker, navigation and so on)?
Click to expand...
Click to collapse
I don't have a car so try and let me know

lospo said:
[BUG]
Your rom does not work with AndroidAuto, i cannot answer/make call because when the call starts i cannot listen from the car, i can listen from the phone speaker, the menù on the car display says bluetooth but the phone use its own speaker.
The bluetooth remain connected in the phonr when i turn off the car, after several time the phone "think" that is connected to the car, and i cannot do calls, until i turn manually off the bluetooth.
Is there something to do/try?
Thanks
Click to expand...
Click to collapse
I recommend joining the support group and sending the bug along with the log

sotmax said:
Rom is great. Only thing that is annoying 8s that usual random a12 bug where I can't here the other person on apps like Viber or whatsapp
Click to expand...
Click to collapse
I'm working on fixing it, it's a really annoying bug

VitorSSSouzaBR said:
I recommend joining the support group and sending the bug along with the log
Click to expand...
Click to collapse
Ok, i just send the log (MatLog with root privileges) and the bug to the gruoup.
Thank you so much!

VitorSSSouzaBR said:
I'm working on fixing it, it's a really annoying bug
Click to expand...
Click to collapse
To help you a little bit with app behaviour.
On Viber video call they can hear me but i can't. On normal Viber call all working ok. If I connect my earbuds all working ok even on video call. If I swap output from bt to speaker during call with Bluetooth, then speaker working great. On some previous builds I manage to just press speaker off and on and working.
To my knowledge vider and all other VoIP apps can't detect speaker at all unless you have one more source(bt, cable earpiece etc).
Also in volte calls I can't hear anything from earpiece at all. I have to disable volte if I want to have normal calls but this is a wide spread bug but is from system if has something to do. In general VoIP calls are misbehaving .
Hope that helps

Hi bro,
Really i love this rom a lot but i have something annoying me that the mic sensitivity is to high that make the sound on my ear too loud can i decrease it ?

guys if you facing internet calls problems try to disable this flag under developer options to see if it's fixed. I think this flag is causing the issue where you can't hear the other person and its for choosing audio output .
Give some feedback to see if it's ok for you as for me seems fixed now

There is a bug on locksreen clock, it freezes during the sleep.

Is this ROM still under development? For me it's the best one for our phone, only locksreen clock is the problem. If that can be fixed it would be perfect.

Hi,
This ROM is really awesome, really good Today is the 8th day I'm using this ROM, so far it's running smoothly, there are only a few problems with the camera and banking applications, but the camera can be tricked by using Parrot's GCam, but I haven't found the Bank application yet. Can you tell me how to use the Bank App, the bank app always closes automatically.
Thanks a lot

[UNOFFICIAL][ROM][13] LineageOS 20

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. This version comes in two flavors, GMS and vanilla. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation
Here
Extra features:
MindTheGapps included
3 finger swipe screenshot
NoName (4.14.314) kernel included
Stock-like FOD implementation
Signature spoofing patches
Download
GMS
Vanilla
Lineage Recovery
If you like my work consider supporting me:
Ko-Fi
Notes
Core google apps are pre-included in the GMS variant, hence it isn't needed to flash them on-top
Lineage Recovery included
Android 11 firmware Based​
Android OS version: 13
Security patch level: May 2023
Build author/Device Maintainer: Skyblueborb
Support Group: Here
Device Source code: Here
Vendor Source code: Here
Kernel Source code: Here
Source code: https://github.com/LineageOS
​

RESERVED
Changelod 05.05.2023:
• Updated to May ASB
• Introduced network traffic indicator
• Improved system smoothness on default kernel
• Improved UDFPS latency

Thanks friend. Just what I ve ben waiting for.

This looks tasty!
Two Questions:
(A) Is it possible to upgrade from your other LineageOS 18.1 Rom, or is a clean install required?
(B) I do a lot of long exposure pictures and therefore use the pro mode on the stock camera app quite often. Is it included again? (The camera app in LineageOS was always very limited years ago, I don't know how it is now.)

Typhoon_Master said:
This looks tasty!
Two Questions:
(A) Is it possible to upgrade from your other LineageOS 18.1 Rom, or is a clean install required?
(B) I do a lot of long exposure pictures and therefore use the pro mode on the stock camera app quite often. Is it included again? (The camera app in LineageOS was always very limited years ago, I don't know how it is now.)
Click to expand...
Click to collapse
A) you can't dirty flash, clean flash required
B) the stock cam is not included, but the aperture camera lineage 20 comes with is really great, not sure about long exposure shots tho, probably some gcam would suit that need nicely

Skyblueborb said:
RESERVED
Click to expand...
Click to collapse
Hi,
I installed your rom on my Mi A3 European model.
Since one week, everything went well, and overall everything works fine except:
- SMS won't send if LTE call are activate (I use google message app)
- Battery decreases when I use android auto in my car (connected on USB) whereas before (A11 xiaomi stock rom) my phone was charging
- The "night filter lighting" is too much yellow even when setting it to the minimum (0% now is ~30% before on A11 xiaomi stock rom)
- The automatic brightness works badly (I had to use macrodroid to manage this setting)
Otherwise thank you very much for your work, everything else works perfectly for the moment. It's the first time I use lineageos on my phone, how will it be for updates? (OTA or manually?)

Hobbi1 said:
Hi,
I installed your rom on my Mi A3 European model.
Since one week, everything went well, and overall everything works fine except:
- SMS won't send if LTE call are activate (I use google message app)
- Battery decreases when I use android auto in my car (connected on USB) whereas before (A11 xiaomi stock rom) my phone was charging
- The "night filter lighting" is too much yellow even when setting it to the minimum (0% now is ~30% before on A11 xiaomi stock rom)
- The automatic brightness works badly (I had to use macrodroid to manage this setting)
Otherwise thank you very much for your work, everything else works perfectly for the moment. It's the first time I use lineageos on my phone, how will it be for updates? (OTA or manually?)
Click to expand...
Click to collapse
1st and 2nd issues i haven't encountered (i don't have android auto easily accessible to test), night light can somewhat be tuned manually via the live display color calibration, auto brightness is tuned to your usage, if you have it enabled try nudging the bar to how you like it, after a while it will follow the preferences you set.
I might implement OTA, but that would still require at least one manual upgrade
Glad you enjoy the rom

Thanks a lot for the rom. Everything works perfect out of the box. I did a clean install coming from your lineageos 18 build. The new lineageos camera app is really good. I could easily install microG and universal safetynet fix. If we can't find updates here, I'll take a look at your telegram channel OTA would be a great solution to this.

Any chance of trying to go official? The immediate advantage would be the automated (weekly) builds, with free OTA upgrades, and fixes from the upstream devs when they break things on their side.

Skyblueborb said:
1st and 2nd issues i haven't encountered (i don't have android auto easily accessible to test), night light can somewhat be tuned manually via the live display color calibration, auto brightness is tuned to your usage, if you have it enabled try nudging the bar to how you like it, after a while it will follow the preferences you set.
I might implement OTA, but that would still require at least one manual upgrade
Glad you enjoy the rom
Click to expand...
Click to collapse
Hi,
For Android Auto, I tried with another USB cable and it charges correctly during use. It's strange the USB cable I had, worked perfectly for 2 years, I tried it again after android auto update and the phone still discharges but less... I think it comes from android Auto updates more than your rom.
Now I'm looking to recover the stock camera app from the mi A3 which allows the use of wide angle, the 48Mpx sensor and saving directy on SD card.
Anyone tried ANXCamera?

Can you release a version without the GAPPS ?
Or at least with the minimal Pico variant?
There are people who really dislike to see google everywhere and prefer to use devices that are out of the scope of constant surveillance and some of them prefer using LOS exactly with that idea in mind.

enapah said:
Any chance of trying to go official? The immediate advantage would be the automated (weekly) builds, with free OTA upgrades, and fixes from the upstream devs when they break things on their side.
Click to expand...
Click to collapse
There are several problems with official, the source modifications i made aren't allowed in official (without them performance would be slower, FOD would be blinding, just to name a few)

nov01 said:
Can you release a version without the GAPPS ?
Or at least with the minimal Pico variant?
There are people who really dislike to see google everywhere and prefer to use devices that are out of the scope of constant surveillance and some of them prefer using LOS exactly with that idea in mind.
Click to expand...
Click to collapse
Please read the post again, especially the download section, the vanilla version is available, and the gms variant is (as it states in the notes) only core Gapps (playstore and play services)

Skyblueborb said:
There are several problems with official, the source modifications i made aren't allowed in official (without them performance would be slower, FOD would be blinding, just to name a few)
Click to expand...
Click to collapse
Thanks for your time
Edit (quick reply posted prematurely on line change, sorry): Because you already build two different versions (GMS and vanilla) maybe it would be feasible to have the "less than ideal but well supported" official version while still keeping the "optimized and overall better" fork? Just spitballing here, I am fully aware of the hurdles the device charter creates -- incidentally, those that make it through the process usually end-up being well supported all-around.

I second that, that would be wonderful. People are so disappointed by Xiaomi about the A3. A nice device with great hardware but abandoned early by Xiami and the community and lots of problems during its official life span.

enapah said:
Thanks for your time
Edit (quick reply posted prematurely on line change, sorry): Because you already build two different versions (GMS and vanilla) maybe it would be feasible to have the "less than ideal but well supported" official version while still keeping the "optimized and overall better" fork? Just spitballing here, I am fully aware of the hurdles the device charter creates -- incidentally, those that make it through the process usually end-up being well supported all-around.
Click to expand...
Click to collapse
I thought long and hard about applying for official, but in the end i didn't think it would succeed, there are a plethora of different officially supported roms for A3 which would all perform better than Lineage official, and i feel that official is really limiting what i can do. About mainting two versions, yes i do, theoretically even 4 versions (GMS/Vanilla for Los 18/20), but official also needs a lot of attention, they require you to spend time on it, and that would mean it would eat more of my time, doing a thing i do not believe will succeed (maybe the fod can be fixed, but geekbench scores and others cannot be easily fixed from the device tree alone)
And what do you mean about the good all-round support? Getting regular updates?
The whole device tree and vendor passes the device requirements afaik, but i don't wanna release a build with FOD that doesn't have dimming, it would really make the build failed in my eyes.

Hey thank you for this great ROM, I really love it, it has much better functionality then stock. I like the adb root feature. Of course official would be nice, but I understand your decision.
I am having only one issue: When calling with headset via audio jack the volume is way to high even on the lowest setting. Is there any way to change this? Couldn't find a proper way to adjust that.
Thank you for a reply

MeatHill said:
Hey thank you for this great ROM, I really love it, it has much better functionality then stock. I like the adb root feature. Of course official would be nice, but I understand your decision.
I am having only one issue: When calling with headset via audio jack the volume is way to high even on the lowest setting. Is there any way to change this? Couldn't find a proper way to adjust that.
Thank you for a reply
Click to expand...
Click to collapse
The volume of the mic, or the volume of what you hear?

Hey, I am interested in installing this on my Xiaomi MI A3. Does it support adding a work profile/account? This is a feature that I use on my stock rom and it is essential. Thanks

Eleari said:
Hey, I am interested in installing this on my Xiaomi MI A3. Does it support adding a work profile/account? This is a feature that I use on my stock rom and it is essential. Thanks
Click to expand...
Click to collapse
Are you talking about the launcher (some google launchers have seperate tabs at the top to pick which profile to open an app in) or system wide (when you have a logo in the status bar/qs that you can open to sign in to another "account")?