Related
Hello,
N910C, COJ5, noroot. Suddenly my phone stopped to use fingerprint sensor and backup password I am providing is not being acceptable.
Short list:
- notifications, network, sms and incoming calls are working, BUT nothing else
- after restarts, removing battery, tries to use ODIN(3.07 & 3.10) or TWRP or kernel with permissive - not working (blocked by R/L) - I wanted to use root privileges to remove files in /data/system responsible for fingerprints and backup password.
- ADB is working
- I want to recover data before wipe - some free soft like Android Recovery Tool or sthg like this ?
Any ideas?
Thanks in advance!
--
Szymon
I see three ways:
-Try to unlock with the fingerprint, it will give you the option to enter a secondary password. Put a random pass 5 times until the device blocks you to keep entering wrong passwords. After that, a new button saying "Unlock with your google account" should appear. Touch it, put your email and password and wait for a couple of seconds. The device will unlock and will set the lockscreen to "Swipe".
-If that doesn't work (rare), try this, it shoud work: http://forum.xda-developers.com/not...ass-lock-screen-pattern-password-pin-t2948336 (since your device is locked you can't access to the MTP functions. You have to put the zip file in a external sd card and flash it with TWRP.
-If that doesn't work either (dafuq?), make a data backup in TWRP ("Backup" option, then select data only), wipe your device, flash a rom and then flash the backup again.
Also remember: "Wipe data" option in TWRP erases all ylur apps and configs, but your pesonal info like photos, documents, downloads, etc will still be at there.
galaxynote2 said:
I see three ways:
[...]
Click to expand...
Click to collapse
I see that you did not read my post
All of these 3 options you mentioned are not possible.
Any other ideas?
I just copied via adb in shell all important files from internal memory and now after I wiped it out I got strange info that "This device is locked because of an abnormal factory reset"
I am not using Find My Mobile Samsung service so WTF ?! Why is it asking me for something that I am not using and it will be not working ???
Regards,
add-on: there was a Find My Mobile by Samsung block, but I used some mystery account I forgot about Now everything is up and running
I can't figure out why my attempts to root my new On5 continue to fail halfway through.
I've tried different Odin versions...
can anyone offer some help, please?
can I use the AP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5 stock rom...?
thanks for anyone's kind help...
Glenn
I just rooted my G550T1 (On5) yesterday - Odin/TWRP/SuperSU
I just went through this process for virtually the same phone. [G550T1UVU2AQC4; For your exact Model's S/W# like this, look in battery compartment or the box the phone came in]
Despite being over 6 months old, I figured I may as well post the information for future onlookers. I could have used this info yesterday.
For this post specifically regarding "failing half way through," I would hazard to guess that the firmware already installed on the phone is slightly more up-to-date than what you're trying to flash. Either that, or you don't have the right settings turned on to allow Odin to flash over the AP. Plus, how were you planning on rooting by flashing over the stock firmware in the first place? lol
Either way, I recommend just making sure what I'm about to say is what you've done so far.
Disclaimer: Rooting your phone, even attempting to, or using rooted apps can cause irreparable damage and turn it into a brick. Always make sure what you are using the root for is compatible with your model!!!
Notes:
- For rooting the Galaxy On5, Odin is merely to flash the recovery software to the device. The recovery software is where you install the root.
- For extra precaution, my method does not involve the external SD card. They seem to cause random issues for the first boot after rooting.
If you insist on doing it with the external SD card installed, MAKE SURE YOU HAVE NO APPS ALREADY TRANSFERRED TO THE EXTERNAL SD CARD!
So to start....
Requirements:
Windows PC with open USB port to download files and transfer the files [Back USB ports are more reliable for PC Desktops; All USB ports are fine with a laptop]
USB-A to USB-B cable [Stock micro-USB cable]
Samsung On5 [Recommended ~100% battery]
A little patience
Galaxy On5 Settings:
#1 - Enable Developer Options
Settings > About device > Build Number - Keep tapping the Build Number until it says you're enabling Developer options, and continue tapping until you succeed.
#2 - OEM Unlock and USB Debugging
Settings > Developer options > Make sure both "OEM Unlock" and "USB Debugging" are turned on
#3 - Enable Unknown Sources
Settings > Lock screen and security > Make sure "Unknown sources" is turned on
Downloads: [4]
Samsung USB Driver - Link to Samsung's download for their Android USB driver for mobile phones. [Install regardless of whether you can already transfer from PC to Android]
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin - Link to an XDA Forum Post which, unlike most, has kept updated and added all versions. [I recommend to use the most up-to-date version; Remember to click the file name of the attachment to download]
https://forum.xda-developers.com/showthread.php?t=2711451
Extract the Odin zip file to an easily accessible folder like "My Documents" and/or create its own file "Odin"
TWRP - Link to the always most up-to-date version for the Galaxy On5. [I don't recommend other recoveries; This is simple and reliable]
https://twrp.me/devices/samsunggalaxyon5tmobile.html
Don't unzip TWRP. Leave file zipped as-is and move it to the same folder as Odin; and/or create its own Sub-Folder for organization "Documents\Odin\TWRP"
SuperSU - Link to the SuperSU version I used that worked smoothly.
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Link to the official website for an updated version. [I would just use what you know works though; From the official page, follow the most recent SuperSU release link and find the .zip file]
https://chainfire.eu/
Where to put SuperSU
- Connect PC to Galaxy On5 [After installing USB Driver]
- Open the file where your SuperSU download is.
- Right-click SuperSU > Click Copy
- Now navigate to your On5 [Should be available in the left panel; if not go to "My Computer" and it should pop up]
- Find, or create, a folder you can easily remember inside the phone's internal memory [i.e; "Phone\Android" or create your own folder "Phone\TWRP"]
- Right click while inside the designated folder and paste the SuperSU zip
Time to start rooting:
Double check that android's settings, and the rooting files are in the right places.
Download Mode:
- Disconnect from your PC, and completely shut down your On5.
- After it is off; Press and hold first the Volume Down Button + The Home Screen Button + Then The Power Button.
- Hold the combination until download mode pops up
- Press Volume Up
- You are now ready for Odin
Odin:
- Start Odin on your PC [Run as Administrator for extra assurance]
- Click the "AP" slot, and navigate to the folder where you saved the TWRP zip file, and select it
- In a moment, the file should be listed in the "AP" section
- Verify that the AP selection's checkbox is checked
- Under options on Odin, MAKE SURE "Re-Partition" IS NOT checked.
- Make sure "Auto-Reboot" and "F. Reset Time" are checked. [Auto-Reboot not required; Can manually shut off by battery removal after Odin gives the green "PASS" light]
- Plug your On5 into your PC now
- Odin will verify the connection with a little light blue box in the "ID:COM" section
- Double check settings
- Press the "Start" button
Odin results should say "PASS!" is green if the operation was done successfully.
If red "FAIL," then either try different versions of Odin, different USB slots, double check everything, or troubleshoot at your own risk. [Must remove battery and restart in download mode again to retry]
After Odin gives a "PASS!"
Booting Into TWRP Recovery:
- You might get lucky, and Odin automatically reboots the phone into TWRP.
-- If it does not reboot into TWRP, then let the phone finish loading to your homescreen and then fully shut it off. [If stuck in boot screen, then force shut-off with battery removal after disconnecting the device]
- To get into recovery from the phone being shut off, do the same as the Downloader, but by holding volume up instead of down.
[Hold Volume Up + Home Button + Power/Lock]
TWRP:
- On the start page, there will be a slider that will allow TWRP full access. Slide it.
- Go into recovery/restore/backup and create a recovery image in an easily-accessible folder like your other files [With SuperSU would be easiest]
- This may take a moment so be patient
- Once that is complete DO NOT REBOOT YET
- Go back to the home screen and go to "Install"
- Navigate to the file where you put the SuperSU zip [NOTICE: Instead of "Phone\TWRP"; your folder would be "sdcard\TWRP" despite it being on internal storage]
- If you can't see the zip file, make sure the button "Install from zip" is clicked instead of "install from image"
- Select the file
- Swipe to install, and then use the quick "erase cache" option TWRP gives after
- Click the reboot option
- You will be taken to their final page asking if you want to install their app, you don't have to. I actually recommend doing that at a later time. Swipe to reboot.
VUELA!
It will take some time to boot, but you should now be rooted!
Bootloop or boot screen freezing? [Make sure to give it time]
If you didn't take my advice and did it with the external SD card, shut off the phone, take out the SD card, and try booting again [Again allowing time to boot]
Wait until device is fully booted before reinserting SD card, then use a file browser to delete all Android files inside the SD card before you ever reboot or shut down again. [You might not remember what could have caused the problem after a while]
everything worked until i tried to go into recovery mode is there a alternative
Randeag said:
I just went through this process for virtually the same phone. [G550T1UVU2AQC4; For your exact Model's S/W# like this, look in battery compartment or the box the phone came in]
Despite being over 6 months old, I figured I may as well post the information for future onlookers. I could have used this info yesterday.
For this post specifically regarding "failing half way through," I would hazard to guess that the firmware already installed on the phone is slightly more up-to-date than what you're trying to flash. Either that, or you don't have the right settings turned on to allow Odin to flash over the AP. Plus, how were you planning on rooting by flashing over the stock firmware in the first place? lol
Either way, I recommend just making sure what I'm about to say is what you've done so far.
Disclaimer: Rooting your phone, even attempting to, or using rooted apps can cause irreparable damage and turn it into a brick. Always make sure what you are using the root for is compatible with your model!!!
Notes:
- For rooting the Galaxy On5, Odin is merely to flash the recovery software to the device. The recovery software is where you install the root.
- For extra precaution, my method does not involve the external SD card. They seem to cause random issues for the first boot after rooting.
If you insist on doing it with the external SD card installed, MAKE SURE YOU HAVE NO APPS ALREADY TRANSFERRED TO THE EXTERNAL SD CARD!
So to start....
Requirements:
Windows PC with open USB port to download files and transfer the files [Back USB ports are more reliable for PC Desktops; All USB ports are fine with a laptop]
USB-A to USB-B cable [Stock micro-USB cable]
Samsung On5 [Recommended ~100% battery]
A little patience
Galaxy On5 Settings:
#1 - Enable Developer Options
Settings > About device > Build Number - Keep tapping the Build Number until it says you're enabling Developer options, and continue tapping until you succeed.
#2 - OEM Unlock and USB Debugging
Settings > Developer options > Make sure both "OEM Unlock" and "USB Debugging" are turned on
#3 - Enable Unknown Sources
Settings > Lock screen and security > Make sure "Unknown sources" is turned on
Downloads: [4]
Samsung USB Driver - Link to Samsung's download for their Android USB driver for mobile phones. [Install regardless of whether you can already transfer from PC to Android]
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin - Link to an XDA Forum Post which, unlike most, has kept updated and added all versions. [I recommend to use the most up-to-date version; Remember to click the file name of the attachment to download]
https://forum.xda-developers.com/showthread.php?t=2711451
Extract the Odin zip file to an easily accessible folder like "My Documents" and/or create its own file "Odin"
TWRP - Link to the always most up-to-date version for the Galaxy On5. [I don't recommend other recoveries; This is simple and reliable]
https://twrp.me/devices/samsunggalaxyon5tmobile.html
Don't unzip TWRP. Leave file zipped as-is and move it to the same folder as Odin; and/or create its own Sub-Folder for organization "Documents\Odin\TWRP"
SuperSU - Link to the SuperSU version I used that worked smoothly.
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Link to the official website for an updated version. [I would just use what you know works though; From the official page, follow the most recent SuperSU release link and find the .zip file]
https://chainfire.eu/
Where to put SuperSU
- Connect PC to Galaxy On5 [After installing USB Driver]
- Open the file where your SuperSU download is.
- Right-click SuperSU > Click Copy
- Now navigate to your On5 [Should be available in the left panel; if not go to "My Computer" and it should pop up]
- Find, or create, a folder you can easily remember inside the phone's internal memory [i.e; "Phone\Android" or create your own folder "Phone\TWRP"]
- Right click while inside the designated folder and paste the SuperSU zip
Time to start rooting:
Double check that android's settings, and the rooting files are in the right places.
Download Mode:
- Disconnect from your PC, and completely shut down your On5.
- After it is off; Press and hold first the Volume Down Button + The Home Screen Button + Then The Power Button.
- Hold the combination until download mode pops up
- Press Volume Up
- You are now ready for Odin
Odin:
- Start Odin on your PC [Run as Administrator for extra assurance]
- Click the "AP" slot, and navigate to the folder where you saved the TWRP zip file, and select it
- In a moment, the file should be listed in the "AP" section
- Verify that the AP selection's checkbox is checked
- Under options on Odin, MAKE SURE "Re-Partition" IS NOT checked.
- Make sure "Auto-Reboot" and "F. Reset Time" are checked. [Auto-Reboot not required; Can manually shut off by battery removal after Odin gives the green "PASS" light]
- Plug your On5 into your PC now
- Odin will verify the connection with a little light blue box in the "ID:COM" section
- Double check settings
- Press the "Start" button
Odin results should say "PASS!" is green if the operation was done successfully.
If red "FAIL," then either try different versions of Odin, different USB slots, double check everything, or troubleshoot at your own risk. [Must remove battery and restart in download mode again to retry]
After Odin gives a "PASS!"
Booting Into TWRP Recovery:
- You might get lucky, and Odin automatically reboots the phone into TWRP.
-- If it does not reboot into TWRP, then let the phone finish loading to your homescreen and then fully shut it off. [If stuck in boot screen, then force shut-off with battery removal after disconnecting the device]
- To get into recovery from the phone being shut off, do the same as the Downloader, but by holding volume up instead of down.
[Hold Volume Up + Home Button + Power/Lock]
TWRP:
- On the start page, there will be a slider that will allow TWRP full access. Slide it.
- Go into recovery/restore/backup and create a recovery image in an easily-accessible folder like your other files [With SuperSU would be easiest]
- This may take a moment so be patient
- Once that is complete DO NOT REBOOT YET
- Go back to the home screen and go to "Install"
- Navigate to the file where you put the SuperSU zip [NOTICE: Instead of "Phone\TWRP"; your folder would be "sdcard\TWRP" despite it being on internal storage]
- If you can't see the zip file, make sure the button "Install from zip" is clicked instead of "install from image"
- Select the file
- Swipe to install, and then use the quick "erase cache" option TWRP gives after
- Click the reboot option
- You will be taken to their final page asking if you want to install their app, you don't have to. I actually recommend doing that at a later time. Swipe to reboot.
VUELA!
It will take some time to boot, but you should now be rooted!
Bootloop or boot screen freezing? [Make sure to give it time]
If you didn't take my advice and did it with the external SD card, shut off the phone, take out the SD card, and try booting again [Again allowing time to boot]
Wait until device is fully booted before reinserting SD card, then use a file browser to delete all Android files inside the SD card before you ever reboot or shut down again. [You might not remember what could have caused the problem after a while]
Click to expand...
Click to collapse
everything worked until I got into recovery mode and nothing would load the android icon gear were turning then said it was nothing is there an alternative to gt into recovery mode????
Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate
I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.
You, mister, are my savior! Thank you very much.
Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:
Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it
Hello XDA community,
Im a noobie when it comes to rooting, thats why i need help...
I deleted some files that i want to recover on my Samsung S7 Edge 2-3 years ago, this device has Android 7.0. (Never updated)
There is a lot of apps such as Disk Digger that offer you to recover every single file but the device must be rooted to access 100% on the internal memory.
Right now my Samsung S7 Edge is not rooted but i need to root to recover this files, so my question is, there is anyway of rooting without factory reset, or there is anyway of doing a fully backup of the internal memory of my device without touching the partitions so then i can try recovering my files later with this apps?
I hope someone can help me...
Regards
It's pretty disappointing that nobody ever responded to this considering how big is a community it is and how popular the S7 Edge was. I know this is pretty old and hopefully you were able to resolve this before this message but I'm going to respond to this just so you don't feel like your question wasn't acknowledged at all. I have an S7 Edge through Verizon which uses the Snapdragon processor. And I will find a link to post for you that although the method says it's discontinued I rooted my phone through this method and it works fine. The only reason that you would have to wipe your phone is if you're changing firmware as far as I know. I've rooted my phones and did not have to wipe them. I kept all the data and everything.
Before I lift this you are also asking about an application that you could use to back up your phone and that would be Samsung smart switch. It has a companion app for the desktop and it sinks to the phone and it'll make a backup of your data.
Now on to the root method all props and praise goes to the people that worked to give this to the people I'm not good at doing all this **** and I'm not meaning to step on any toes I'm just trying to help you since nobody did for two ****ing years.
To root
1. Download PrinceComsys Odin
Odin.Prince.Comsy.zip
drive.google.com
2. Download the engboot.
Engboot Download
Nougat_S7_Edge_EngBoot.tar.md5
drive.google.com
3 make sure you have adb and fastboot installed on your computer (goggle them)
4. Root file
Download the file below.
Nougat_S7_Root_2_82_All_Carriers_V2.zip | by jrkruse for Galaxy S7 Edge
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
BELOW IS THE ROOT AND MOD FOR THE PHONE!!!!!
Follow this method to root:
1. Shut off the phone and boot into download mode (volume down, home, and power). Use Odin And Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
2. When the phone reboots, unlock developer options by going into the phone settings scroll down to 'about phone' find the build number and tap on it repeatedly after several times it will unlock Developer Options then back out once and in your settings you should have a new option on the very bottom called developer options go into that and enable USB debugging and Disable Verify Apps Over USB.
Plug the phone into the computer and make sure you have adb and fastboot installed to this location
C:\Users\YOUR PROFILE\AppData\Local\Android\Sdk\platform-tools
go to that folder and inside it hold shift and right click then click on 'open command window here'
then in command prompt type
adb devices
then hit enter.
The computer should automaticly detect and run adb
3. Unzip the Nougat_S7_Root_2_82_All_Carriers_V2.zip and hold shift and right click then click on 'open command window here'
In the command window type root.bat then press enter from your PC.
4. This will install root when done phone will reboot
5. The process wipes dalvik cache so it will take a few minutes to reboot
6. If having problems getting Grant SuperSU dialog to come up you can delete the SuperSU app and root will be granted instantly to all root request
Give phone a few min to settle open developer options set animation scales .05 and others to .05
Give phone a few min to settle open developer options set animation scales .05 and others to .05
ODIN FAILED TO WRITE ERROR
Did you get this Failed To Write Message in Odin?
----------------------------
Odin Error Message:
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
SOLUTIONS
Did you:
? Open Odin as Administrator?
? Try the Prince Comsy version?
? Enable Developer Settings?
-Open Settings > About Phone > Tap Build Number 7 Times
? Enable OEM Unlock?
-Go Back to Settings > Tap Developer Options > Tap OEM Unlock
? Enable USB Debugging?
-Tap Developer Options > Tap USB Debugging
NOTHING WORKS
Did you try every single thing but nothing works?
Well, did you right click "Odin" each time you go to open it and then click "open as administrator"?
Sometimes you have to try several different versions of Odin.
But I have found that Odin3 v3.12.7 was the one that would work when the others had not.
I always would forget to also open Odin as Administrator.
It's a pain in the neck to have to remember to open as admin every time.
But you usually have to do it.
Did you check that ADB had started? Maybe that might be the reason it won't work?
But I doubt it! But you just never know and I am just trying to help you get it flashed.
It's a very quick flash and you can see that the PDA load was very quick as well.
But as far as the errors, you just have to keep trying...
Which I mean, you sometimes have to open, close, reopen Odin when it doesn't work.
Sometimes that helps, sometimes it doesn't.
It's all about the right Odin version at the time
making sure the cord is good
Opening Odin as Admin
And keep trying again after restarting your phone by holding the download mode button sequence again.
============
Congratulations! You are ROOTED but you're not done
Follow these instructions next
On your phone, open the SuperSU app (installed during the root process) and tap on Settings. Half-way down under Security, tap on "Enable su during boot".
This option will ensure that startup scripts that are installed during this process get to do their job correctly.
Download the fix or fix+debloat script flashable ZIP package appropriate for your model of phone and copy this file to your device:
S7_VOLTE_ICON_FIX_ALL_VARIANTS or S7_or_S7Edge_Fixes_V15.zip (MD5 hash F15CD9BDC35382A8F48FFBEDBB1BCDF0) (any Samsung Galaxy S7 or S7 Edge)
turn off auto update of time and date in your phone settings, then set your year to 2013,
Launch FlashFire app on the phone and click the (+) button in the lower right to add a step. Select a 'Flash ZIP or OTA' flash step.
Locate the flashable ZIP package and select it. For options, check on 'Mount /system read/write' and leave the rest of the options unchecked.
Tweaks to Root
Debloat and fix several issues with the phone (CPU lag issues, poor battery performance, phone becoming too hot, Wi-Fi not saving passwords, hotspot/tethering not working,
VoLTE icon appearing, searching for service issues, MMS not working, unauthorized security nag notification, etc.):
Full notes on what this flashable update does:
Adds a rotate button to the native gallery app
.
Adds a shortcut call button in the call log next to each logged call.
Adjusts several CPU tunables, which fixes phone lag and battery life issues.
Disables "No SIM" popup when no SIM card is present.
Disables roaming data by default.
Disables secure storage support, which fixes Wi-Fi passwords not saving issue.
Disables Verizon provisioning for Wi-Fi tethering/hotspot (will still use your data plan, of course).
Enables ADB to run as root by default.
Enables CPU idling/sleeping, which fixes phone heat issues.
Enables mock GPS locations.
Enables native call recording feature in the dialer.
Enables native Wi-Fi calling feature in the dialer.
Enables RIL power saving features.
Enables scheduled messages in the native messaging app.
Enables the camera during calls.
Enables unlimited contact merging.
Enables using the new 3GPP2 Profile ID (Verizon exclusive).
Fixes various 'searching for service' and other cellular network connectivity issues (SMS/MMS not working, calls not working, etc.)
Knox apps, drivers, and data are removed (fix+debloat version).
Prefers LTE network.
Raises the contact name length limit to 1,280 characters.
Raises the maximum SMS recipient limit from 10 to 90.
Remove nagging 'unauthorized actions' security notification (fix+debloat version).
Removes VoLTE icon.
after you flash your stuff change the date back. and you're good.
I know this all seems like a lot and it seems very confusing but it's pretty easy if you just follow the directions this will not wipe your data. Please do research, read through the forms and just tried to get as much knowledge as you can before you go about doing this it's an easy process but it's better to go in with more knowledge, I hope this helps. If you have to reinstall the firmware make sure that you install CSC home so you don't lose your data
I got bored so I made a HavocOS guide. Enjoy!
I am not responsible for any bad things happening to your device/angry parents because YOU messed your phone up. If it somehow broke after you did this, it's not my problem.
oh yea also I didnt make the OS. this is just a guide.
Downloads in video description.
I wanted to make this quick and simple so here's a video:
----------------------------------------------------------
Written guide:
-
Pt. 0: quick prerequisites that i forgor to write before
-
consider reading through the guide before you do it
make sure oem unlocking is enabled on your phone. if you dont know how to do that uhh here's how:
1. go to settings
2. scroll down to about
3. tap the build number until it asks for your screen lock
4. go to system
5. go to developer options
6. enable oem unlocking.
7. if its grayed out its because your phone is cringe, sorry.
-
Pt. 1: Downloads
-
Download all of these files
Google USB driver Extract with 7z or WinRar.
Platform Tools Click "Download for Windows" and extract with 7z or WinRar.
Stock Firmware Extract with 7z or WinRar.
TWRP/Kernel Don't extract this.
HavocOS Don't extract this.
-
Pt. 2: Drivers
-
How to install Android drivers:
1. Put your phone in fastboot mode (turn off your phone and turn it back on with power button and vol down.)
2. Open Device Manager on your PC.
3. Click on the dropdown for "Other Devices"
4. Find "Android"
5. Double click on "Android"
6. Click on "Update Driver"
7. Click on "Browse my computer for drivers"
8. Click on "Let me pick from a list of available drivers on my computer"
9. Double click on "Show all devices"
10. Click on "Have Disk"
11. Click on "Browse"
12. Find the usb_driver folder that you extracted earlier and in that folder, select android_winusb.inf and hit "Open"
13. Select "Android Bootloader Interface" and it "Next"
14. If there are any warnings, just press "Yes"
Drivers have been installed.
-
Pt. 3: Installing command line tools
-
How to install platform-tools systemwide.
1. Find your platform-tools folder and move it to somewhere where it can stay there forever, E.g. the root folder in your C drive (C:\). I don't recommend putting it on your desktop because that will add useless clutter.
2. Go to your start menu and look up "Environment Variables"
3. Click on "Environment Variables"
4. Scroll down on the bottom; "System Variables" section, find "Path", and double click on it
5. Click on "New"
6. Click on "Browse"
7. Navigate to your "platform-tools" folder
8. Click on platform-tools
9. Click "Ok."
10. Click "Ok."
11. Click "Ok."
12. Click "Ok."
(lol)
oh also i forgot to mention, unlock your bootloader now
steps to do that here:
1. open cmd
2. enter fastboot flashing unlock
3. hit yes on the prompt that appears on your phone
4. you might need to enter fastboot flashing unlock_critical (if cmd gives you an error saying it doesn't exist or something just kinda ignore it, i'm only putting it here just in case)
5. you should be good to continue
-
Pt. 4: The Installation.
-
Installing HavocOS
1. MAKE SURE THAT YOUR PHONE IS IN FASTBOOT MODE.
2. Open aura-p-release-3201
3. Run flash_all.bat (double click on it)
4. Wait until it finishes running.
5. As soon as it closes and your phone screen turns black, immediately hold the power and volume down buttons and enter fastboot mode.
6. Open Command Prompt (CMD)
7. Flash the Kernel by typing fastboot flash boot <boot.img> and replace <boot.img> with the file path to your boot.img file. (Tip: you can drag the file into CMD to put in the file path.)
8. Flash HavocOS by typing fastboot flash system <HavocOS PHH.img> and replace <HavocOS PHH.img> with the file path to the HavocOS PHH.img file. Ignore the errors.
9. Wait until everything finishes and unplug your phone (if you want to)
10. Use volume buttons to go down to "Recovery Mode"
11. Select "Recovery Mode" with your power button. (Tip: double tap the power button to get past the bootloader unlocked warning screen)
12. Swipe to allow modifications
13. Tap on wipe > format data > type "yes" > press "OK"
14. Press back until you get to the TWRP home screen
15. Tap "Reboot" > tap "Recovery" > then tap "Do not install"
16. Wait until it reboots back into recovery.
17. Follow steps 12-14, then hit "Reboot" > then hit "System"
If it doesn't boot into the setup screen, open fastboot mode and format the data once more, then reboot into system.
----------------------------------------------------------
and here are the easiest and also some of the dumbest GSI root instructions ever:
Download Magisk-v21.4.zip
1. Open TWRP and mount everything. (except for USB storage. micro sd card is optional.)
2. Put Magisk-v21.4.zip on your phone (in file explorer)
3. Open the TWRP file manager (advanced > file manager)
4. Navigate to /system/system/bin
5. Find resetprop and tap on it
6. Rename resetprop to phh-resetprop
7. tap on install
8. install Magisk-v21.4.zip
9. Boot up your phone, open magisk, and update everything.
10. Turn on MagiskHide in the settings of magisk manager.
11. Profit$ (lol)
SafetyNet should pass if you did it properly (I would find it kinda funny if you managed to mess up those easy instructions)
Alright guys, have a nice day!
p.s: I might begin work on a user-friendly auto-installer soon.
Thank you OP, finally got Android 11 fully working including SafetyNet, camera/flashlight, Bluetooth and SD card. The only tricky part was the Bluetooth - got help from this comment - needed to delete both APKs before first boot.
pigjr said:
Thank you OP, finally got Android 11 fully working including SafetyNet, camera/flashlight, Bluetooth and SD card. The only tricky part was the Bluetooth - got help from this comment - needed to delete both APKs before first boot.
Click to expand...
Click to collapse
yea i forgot to include that part. I thought you didn't need to do that before boot tho. I managed to get BT working by deleting BluetoothResCommon.apk and renaming RazerAuraBluetoothRes.apk to BluetoothResCommon.apk.
all the links for 4.1 are dead you got any bro?
Cylow333 said:
all the links for 4.1 are dead you got any bro?
Click to expand...
Click to collapse
There is a mirror in the description of the video.
Dude you are a different type of god thank you so much I can finally sleep now.
Quick question: is this version of Havoc have no issues with receiving SMS? Previous versions of it cause this annoying issue that after few minutes from restart SMS stop arriving to phone and the only fix at that time was just to restart it. Tried some patches from telegram but basically end up with no fix.
drumiec said:
Quick question: is this version of Havoc have no issues with receiving SMS? Previous versions of it cause this annoying issue that after few minutes from restart SMS stop arriving to phone and the only fix at that time was just to restart it. Tried some patches from telegram but basically end up with no fix.
Click to expand...
Click to collapse
not that i know of
Uhh is there anyway to edit the buildprop without getting a bootloop? I tried with buildprop editor and i vant see any of the info if i change something and when i restart it goes in a loop.
Cylow333 said:
Uhh is there anyway to edit the buildprop without getting a bootloop? I tried with buildprop editor and i vant see any of the info if i change something and when i restart it goes in a loop.
Click to expand...
Click to collapse
I have never tried editing the buildprop so I don't know, sorry.
Marcos8760 said:
yea i forgot to include that part. I thought you didn't need to do that before boot tho. I managed to get BT working by deleting BluetoothResCommon.apk and renaming RazerAuraBluetoothRes.apk to BluetoothResCommon.apk.
Click to expand...
Click to collapse
So do I have to reflash in order to fix Bluetooth?
Sadly my main reason for losing is that I'm running into a mako issue with HavocOS. systenUI keeps crashing whenever the on-screen keyboard is displayed. This happens with the default installed gBoard and SwiftKey beta. It also crashes when the screen goes to sleep. I followed all the steps from the video. Only thing I did besides that was restore a backup from Google Drive so I didn't have to manually install everything. I'm sadly out of ideas and might have to switch to normal GSI or back to LineageOS so the device is stable enough to use.
gumbyx84 said:
So do I have to reflash in order to fix Bluetooth?
Sadly my main reason for losing is that I'm running into a mako issue with HavocOS. systenUI keeps crashing whenever the on-screen keyboard is displayed. This happens with the default installed gBoard and SwiftKey beta. It also crashes when the screen goes to sleep. I followed all the steps from the video. Only thing I did besides that was restore a backup from Google Drive so I didn't have to manually install everything. I'm sadly out of ideas and might have to switch to normal GSI or back to LineageOS so the device is stable enough to use.
Click to expand...
Click to collapse
I have never had to fix BT before first boot.
And also, that's kinda weird. I've never had any systemUI crashes with the keyboard, although i have had a weird bug where the entire OS crashes and it reboots into a state where its impossible to use. however, to fix that, i just reflashed and i never encountered the bug again. your install might have been a lemon. maybe install again?
Marcos8760 said:
I have never had to fix BT before first boot.
And also, that's kinda weird. I've never had any systemUI crashes with the keyboard, although i have had a weird bug where the entire OS crashes and it reboots into a state where its impossible to use. however, to fix that, i just reflashed and i never encountered the bug again. your install might have been a lemon. maybe install again?
Click to expand...
Click to collapse
Do I need to flash back to stock or can I do a "dirty" reflash?
gumbyx84 said:
Do I need to flash back to stock or can I do a "dirty" reflash?
Click to expand...
Click to collapse
Eh. I think flashing back to stock might be better.
Marcos8760 said:
Eh. I think flashing back to stock might be better.
Click to expand...
Click to collapse
Trying out now. I'm at work so I don't have my laptop with me. Trying it work a live CD image lol
Update: It's been sitting on the "Powered by Android" screen for 20+ minutes. I already tried a data wipe from the bootloader. I can get into TWRP. I'm going to give it another 10 minutes then try flashing HavocOS again.
Update 2: I've made progress. Now it's stick on the HavocOS loading screen. It's been like that for 20+ minutes. Tried the bootloader data format.
Update 3: I was finally able to flash HavocOS at home without issue. I flashed Magisk before even booting into the OS and it seems to be working ok. After it rebooted to complete the setup/install, the issue came back. I'm just flashing HavocOS without Magisk for now.
Hello,
Thank you for the guide, i have installed the android 11 successfully, but i got a startup loup when i tried to restart the phone (in a normal way ), the havoc logo started up then the password, but it just louping between them..
Please help
Hello I did exactly what you said for magisk I updated everything but the problem is that I don't have access to superuser and nor to the module in magisk in my razer phone 2 with havocOS.
Do you have a solution to this problem thank you ?