Related
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
I bought lg g2 labelled as d802 and i updated it to lollipop with kdz method. Phone successfully updated but touch screen went crazy and there was no network. I have searched several forums and found that my lg g2 is not actually a d802, and then i open my phone battery cover and found it is a d800. Then i followed this tutorial and I bricked my refurbished lg g2 and now there is no fastboot, no recovery mode, no QHSUSB_BULK, only download mode ''blue circles'' but not in firmware upgrade section. Stuck at boot loop only LG logo appears and nothing happen. Computer doesn't recognize, no connecting sound in windows.
Anyone can help me, I don't know what should i do now?
Thanks.
too
I'm with the same problem, my d802 was in F2fs and after install a diferent kernel bricked
Hello Guys,
yor are my last hope!
I tried to root my device but there was no working way for it.
So i decided to use this guide (http://forum.xda-developers.com/android/development/root-t-mobile-lg-leon-5-1-1-lollipop-t3194145) to root my phone. I didn't know that this Telekom software is simlocked so i used another guide to unbrick it. Unfortunately it came out that the software i used at this time was the metro pcs version of the stock firmware.
Now i am looking for a working stock firmware cause every german/france software from this pages (http://lg-phone-firmware.com/index.php?id_mod=171) and (http://www.lg-phones.org/category/lg-leon) didn't worked for me.
Every time i tried the 3GCT with Emergency and the cdma with cs_emergency way.
But it always ends in a bootloop with the lg logo and the android symbol then restart and long time LG logo.
I don't understand why Telekom and Metro PCS versions worked but the others don't.
It would be great if you could explain me this.
Greetings
Sven
Hi there! I'm in the same situation. :/ Any help?
I have the same problem too. There's already topic about this, but nobody found solution yet. :/
My god! I have the same BIG problem with LG Leon LTE H340n (C50)! HELP!
Help
Hey guys, I'm a new member so I can't start my own thread so I figured I'd try this out. I bought a LG risio (Leon) off of craigslist and the dude factory reset it when I handed him the cash but now it's asking me for a e-mail or phone number that was previously used with the phone and now I can't get a hold of the guy. Is there any way to get past this situation or am I screwed?
Please don't hate on me for posting this where I did. I just don't have any other options so if someone can help me please do.
Sdh0706 said:
Hey guys, I'm a new member so I can't start my own thread so I figured I'd try this out. I bought a LG risio (Leon) off of craigslist and the dude factory reset it when I handed him the cash but now it's asking me for a e-mail or phone number that was previously used with the phone and now I can't get a hold of the guy. Is there any way to get past this situation or am I screwed?
Please don't hate on me for posting this where I did. I just don't have any other options so if someone can help me please do.
Click to expand...
Click to collapse
This method is USEFUL for your situation & unbricking lg Leon LTE
This method is for ONLY metroPCS
Don't hold me responsible if this method doesn't restore your phone or makes it worse. THERE IS NO WAY TO DOWNGRADE BACK TO ver MS34510B after using this method.
Install
LG United Mobile Driver 3.14.1
LG Flash tool 2014 (build 03/07/2014)
After flash tool installation
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open device manager and changed the LGE Mobile USB Serial port to COM 20
5. Open the Flash Tool
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : MS34510D_00.KDZ
9. Click on Normal Flash
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
MS34510d kdz file: https://mega.nz/#!VNtDCb6C!wotJiiw1CfVNTlpxG3XRnsgiLNtUmzB6zj3tkraNB9s
Lg leon hard brick
I'm having issues with my LG Leon today.I tried to downgrade to v10b in my actual version v10d to Root.I actually tried that but i got problems.When It was 98% stopped and black screen.Everytime now that I restart my smartphone I don't even see the LG logo or nothing just black screen loop but when I do that connected to my computer, I can hear the sound of "recognized" and then "not recognized" and It loops every 15 seconds ~
HELP HELP HELP PLZ
ayoub lg leon said:
I'm having issues with my LG Leon today.I tried to downgrade to v10b in my actual version v10d to Root.I actually tried that but i got problems.When It was 98% stopped and black screen.Everytime now that I restart my smartphone I don't even see the LG logo or nothing just black screen loop but when I do that connected to my computer, I can hear the sound of "recognized" and then "not recognized" and It loops every 15 seconds ~
HELP HELP HELP PLZ
Click to expand...
Click to collapse
Does it have unlocked bootloader? Did you try to enter firmware upgrade mode to flash the correct kdz?
leandeganis said:
Does it have unlocked bootloader? Did you try to enter firmware upgrade mode to flash the correct kdz?
Click to expand...
Click to collapse
yes i try but i cant entre to download mode my lg leon is mt6582 cpu any fix for this probleme i think is hard brick probleme so please help me
ayoub lg leon said:
yes i try but i cant entre to download mode my lg leon is mt6582 cpu any fix for this probleme i think is hard brick probleme so please help me
Click to expand...
Click to collapse
Have you unlocked the bootloader ? Can you access at east to factory reset mode so to wipe data partition?
Lg leon hard brick
leandeganis said:
Have you unlocked the bootloader ? Can you access at east to factory reset mode so to wipe data partition?
Click to expand...
Click to collapse
i unlock bootloader :crying:
no i cant do that my phone is completly dead no download mode no fastboot no recovery any thing but when i conect it to pc it show as a mtk usb port but only 5 second and reconect so i think a scatter file to flash it with sp flash tool please help me help me
YES i unlocked the bootloader
Hi all. I have an LG K8 M200N. When I turn it on it gives me the logo and all but then goes to a black screen with small writings on the top left hand corner saying: fastboot mode product name msm8937 32 samsung 16gb and a bunch of other stuff and at the end it says fastboot mode started. I tried to fastboot reboot via adb but it just says device restarted but the phone does nothing. I also tried installing kdz firmware both with lgup (which keeps saying device not connected to the computer) and LG flash tool 2014 (which gets stuck on 60% and does nothing afterwords). Can someone please help me out here? Thanks you.
Try flashing with LG UP
Try flashing with LG UP (Lab ver.).
Read this post by gottlasz!
Wanted to ask if you have rooted it and if so, how?
I have the LG G6 H870 single sim version, and it's a strange thing.
The Lg G6 remains locked on the LG logo, wait 15 minutes or more.. and does not go any further regardless of flashing method, LG Up or LG Bridge. Now it has the 11th global version installed. Using Uppercut and any version of Nougat starts right after the update. Any version of Oreo, flashed with LG UP or LG Bridge (LG Bridge detects that updating is required and proposes the V20b and installs it) remains stuck at the LG "Powered by Android" logo. It appear on Windows device manager, connected after boot like Serial device, so it's stuck in some Download Mode i think, and after pressing Vol down and power, it enter without problem on Download mode... pressing Vol Up and conecting cable in one second before reboot....
I tried both the bootloader locked and unlocked. The same problem every time. Oreo does not appear as OTA The check now for update message is: "You are using the atest software version for current OS".
Any idea is welcome. Please help!
I have the EXACT same problem.
Any help guys?
Matt
dadme said:
I have the LG G6 H870 single sim version, and it's a strange thing.
The Lg G6 remains locked on the LG logo, wait 15 minutes or more.. and does not go any further regardless of flashing method, LG Up or LG Bridge. Now it has the 11th global version installed. Using Uppercut and any version of Nougat starts right after the update. Any version of Oreo, flashed with LG UP or LG Bridge (LG Bridge detects that updating is required and proposes the V20b and installs it) remains stuck at the LG "Powered by Android" logo. It appear on Windows device manager, connected after boot like Serial device, so it's stuck in some Download Mode i think, and after pressing Vol down and power, it enter without problem on Download mode... pressing Vol Up and conecting cable in one second before reboot....
I tried both the bootloader locked and unlocked. The same problem every time. Oreo does not appear as OTA The check now for update message is: "You are using the atest software version for current OS".
Any idea is welcome. Please help!
Click to expand...
Click to collapse
Sent from my LG-H870 using Tapatalk
Unlock bootloader, root, twrp, install 20c zip via twrp made by Bestsniper, root with Magisk 17.2
Tried that lot in newbie school
HueyT said:
Unlock bootloader, root, twrp, install 20c zip via twrp made by Bestsniper, root with Magisk 17.2
Click to expand...
Click to collapse
Sent from my LG-H870 using Tapatalk
Still stuck on Nougat...it refuses to let me go back up to Oreo.
Tried numerous .KDZ of Oreo, numerous flashable zips of Oreo.
Do I perhaps need a different kind of .laf or boot.img etc?
Matt
Just use this LGUP and first post instructions from here https://forum.xda-developers.com/lg-v30/how-to/using-lgup-crossflashing-t3780969
, "PARTITION DL"，then click "select all" on LGUP modified version. It works for me. Tools from here:
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-market-us998-t3736910 with coresponding dll for LG G6.
dadme said:
Just use this LGUP and first post instructions from here https://forum.xda-developers.com/lg-v30/how-to/using-lgup-crossflashing-t3780969
, "PARTITION DL"，then click "select all" on LGUP modified version. It works for me. Tools from here:
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-market-us998-t3736910 with coresponding dll for LG G6.
Click to expand...
Click to collapse
....IAM SOOOO Greatful.
THANKYOU!!!
You have 100% fixed my phone...u are a ABSOLUTE LEGEND!!
You one of the VERY few good people on this LG G6 forum.
Sooo many just dont even attempt to answer someones question.
I've owned stacks of smartphones and been a member of loads of XDA forums, but I have to say, as far as getting help asnd questions ansered etc....this LG G6 forum is the absolute worst.
Apart from youself, of course.
Iam now over the moon happy, coz you made my phone work again!
Thanks again.
Matt:good::good:
@matthew33
I have the same problem you described.
Could you give me a link to the dll file? I can't find a file matching my phone LG G6 H870. Always getting this error "please, install valid DLL package(*.msi). for the model"
maciey2 said:
@matthew33
I have the same problem you described.
Could you give me a link to the dll file? I can't find a file matching my phone LG G6 H870. Always getting this error "please, install valid DLL package(*.msi). for the model"
Click to expand...
Click to collapse
Sure, here's what I used
Matt
Thank you very much!
For me this method also worked.
At the beginning I had the same problem as before (error about missing dll) but launching the application as an administrator helped.