Related
I'm hoping to prevent my phone from taking updates in case a root exploit is found (but then quickly patched by VZ). I've disabled updates in the developer options (Settings/About Phone/Software Info/Build Number - click 7 times to enable developer options menu / developer options menu / Automatic system updates set to off).
I did that the other day and that was after taking the first "performance" OTA which had already downloaded/installed.
I figured that would do the trick however and hour ago I had my phone sitting on my desk connected to my PC via USB and when I picked it up there was a note saying something about my phone had been updated(?). Maybe it was just a notification I hadn't gotten from the first one somehow popping late but I'm kinda confused.. And this was a message about a system update (I should have screenshotted it or read it more my first thought was **** did I not toggle that developer option correctly....but I had). It was the message saying you may want to reboot as it may have drained the battery on your phone.
I'm on Software: VS99511A
Config: B16.LGE.VS995.0
Build NRD90M
Kernel [email protected]
I noticed in Application manager if I show system I can see 2 "System Updates" and I'm guess those are what kicked on and did something while I wasn't paying attention. Can those be disabled? One of them has an advanced permission for "Modify system settings" which I toggled to "no" cause I figured at worst that would just cause an error. The other I can only force stop and then disable but when I attempt to do that it warns me that doing so would hide it and I'm afraid I might not be able to relocate it/re-enable it (w/o a factory reset?) and that could be a serious problem
How is everyone else in the "hoping root come relatively soon" boat handling updates?
Thanks for any discussion/suggestions....
JayBTV said:
I'm hoping to prevent my phone from taking updates in case a root exploit is found (but then quickly patched by VZ). I've disabled updates in the developer options (Settings/About Phone/Software Info/Build Number - click 7 times to enable developer options menu / developer options menu / Automatic system updates set to off).
I did that the other day and that was after taking the first "performance" OTA which had already downloaded/installed.
I figured that would do the trick however and hour ago I had my phone sitting on my desk connected to my PC via USB and when I picked it up there was a note saying something about my phone had been updated(?). Maybe it was just a notification I hadn't gotten from the first one somehow popping late but I'm kinda confused.. And this was a message about a system update (I should have screenshotted it or read it more my first thought was **** did I not toggle that developer option correctly....but I had). It was the message saying you may want to reboot as it may have drained the battery on your phone.
I'm on Software: VS99511A
Config: B16.LGE.VS995.0
Build NRD90M
Kernel [email protected]
I noticed in Application manager if I show system I can see 2 "System Updates" and I'm guess those are what kicked on and did something while I wasn't paying attention. Can those be disabled? One of them has an advanced permission for "Modify system settings" which I toggled to "no" cause I figured at worst that would just cause an error. The other I can only force stop and then disable but when I attempt to do that it warns me that doing so would hide it and I'm afraid I might not be able to relocate it/re-enable it (w/o a factory reset?) and that could be a serious problem
How is everyone else in the "hoping root come relatively soon" boat handling updates?
Thanks for any discussion/suggestions....
Click to expand...
Click to collapse
In developer options there is disable automatic system updates. I like that feature.
Edit: sorry. I reread and saw you saw that. I had recently found that.
I'm still on 10b I disabled in the dev section and I get the constant you need to update but hasn't done it auto thankfully
Sent from my VS995 using Tapatalk
Any idea how to get past a at&t v20 that has updates already trying to install? Flash a new ROM or maybe a factory reset? BTW its already rooted but I forgot to disable the OTA updates. Thanks. EDIT: Nevermind. Just did a wipe on dalvik and cache, which took care of the problem.
Freezing System updates 1_15_10_0 and System updates 1_16_02_0 using Titanium Backup (this requires root), will stop those messages. It was nearly the same set of processes for the V10.
I've also seen a recommendation to freeze FOTA Update 7.0, and a method using the phone's hidden menu.
I'm not addressing rootless options since this message was posted a month and half before me2151's DirtySanta bootloader and root guide was released, that's no longer an issue.
I'm on 10m and recently rooted. I cannot find 1_15_10_0...I found the other file and successfully froze it. I've also frozen the FOTA Update. I tried accessing the hidden menu, but I get an error message. On 10m, is there a 1_15_10_0?
EDIT: Sorry for digging such a long-dead thread. Didn't see the more recent one that's also active.
Hey guys I know this is OT but is it true that the v20 from Verizon is unlocked and can work with any other sim?
Alright so im dead set on rooting my phone once i realised why the **** not. Im used to jailbreaking iphones and i used to do that alot. (man its so much more complicated on android).
and im god damn stuck on the first step already.
the freaking OEM unlock option is missing??? Im into the developer mode. its not there. Now i know you have to wait 7 Days, but ive had the phone for 2 months. Is it because Ive just updated it to oreo and it reset that timer so now i have to wait seven days... (im sadly a pretty impatient person, im trying to do this at 2am instead of sleeping)
I have an international version and i know its possible. Ive got the SM-G950F Model
Please help. theres so many different guides for so many separate things and old posts and different phones and models and situations.. :c
Same problem here. BUMP!!!
I have also the same problem. my model is G955f Exynos. after flashing official Oreo Rom, CRB7, then updating that to CRE3, I can flash nothing again, not TWRP, not Cf-root, not even nougat Rom. I have tried different versions of Odin, TWRP, and Cf-root but no result. And there is also no damn OEM unlock in Developers options. Does anyone have any solution?
someone has posted here a software named "Cygwin". Its Linux tool, so hard and complicated to use for me.
If anyone can find how to use "Cygwin" to erase Nand and flash again, please reply.
the post Address is this;
https://forum.xda-developers.com/chef-central/android/nand-write-start-fail-odin-soluction-t2851096
Go into the settings and turn off auto-detect time. And time to transfer a month ago. Next, the developer options disable auto-update. Then go into the firmware update to disable the automatic download and click on download updates. Reboot the device and it will appear. I always do that !!!
altai1963 said:
Go into the settings and turn off auto-detect time. And time to transfer a month ago. Next, the developer options disable auto-update. Then go into the firmware update to disable the automatic download and click on download updates. Reboot the device and it will appear. I always do that !!!
Click to expand...
Click to collapse
Of all the instructions i have read.
This one is the best and working answer.
Thank you so much for your idea
1. Disable auto date/time.
2. I set my date 1 or 2 previous months ago.
3. In developer options, I disabled auto system update.
4. In Software update menu, I disable auto download update.
5. Lastly, click the "manually download update" ,I received an error but that's okay.
6. Reboot.
Voila i got my OEM Unlock option without waiting for 7 days or so
batuzai04123 said:
Of all the instructions i have read.
This one is the best and working answer.
Thank you so much for your idea
1. Disable auto date/time.
2. I set my date 1 or 2 previous months ago.
3. In developer options, I disabled auto system update.
4. In Software update menu, I disable auto download update.
5. Lastly, click the "manually download update" ,I received an error but that's okay.
6. Reboot.
Voila i got my OEM Unlock option without waiting for 7 days or so
Click to expand...
Click to collapse
Do you know if this method works with Galaxy Note 8, too?
burduli said:
Do you know if this method works with Galaxy Note 8, too?
Click to expand...
Click to collapse
I don't have Note 8 so I can't be sure but there's no harm with the steps I mentioned.
I actually tried to re flash it clean again(for the 2nd time) with Odin, and @altai1963's trick work again.
Why need 7 or more days when you can do this?
Just try it and let others know if it works for Note 8
Goodluck!
batuzai04123 said:
I don't have Note 8 so I can't be sure but there's no harm with the steps I mentioned.
I actually tried to re flash it clean again(for the 2nd time) with Odin, and @altai1963's trick work again.
Why need 7 or more days when you can do this?
Just try it and let others know if it works for Note 8
Goodluck!
Click to expand...
Click to collapse
I don't own Note 8. I needed it for the article, it will be published on the XDA portal in a couple of minutes.
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
dogsfoot said:
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
Click to expand...
Click to collapse
You just need to make sure your date doesnt revert to current date time after you reboot.
Can you try turning off the sim slot? or airplane mode(then turn wifi on)so that wifi is the only wireless connection u have.
I believe mobile data/sim network auto. adjusts ur time. Let me know if this works
batuzai04123 said:
You just need to make sure your date doesnt revert to current date time after you reboot.
Can you try turning off the sim slot? or airplane mode(then turn wifi on)so that wifi is the only wireless connection u have.
I believe mobile data/sim network auto. adjusts ur time. Let me know if this works
Click to expand...
Click to collapse
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
dogsfoot said:
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
Click to expand...
Click to collapse
Same thing happenig to me...doesn't matter if i even turn the wifi off and take out the sim card, after reboot it shows the current date.
Any confirmation whatsoever on the Note 8? Have people seriously been so scared off by the OEM Unlock issue that no-one has bought a new one recently, lol???
dogsfoot said:
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
Click to expand...
Click to collapse
dogsfoot said:
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
Click to expand...
Click to collapse
Sorry I cant help u with that where DATE & TIME is not sticking after reboot.
Im not sure whats the real cause but for me, the steps / bypass for OEM Unlock option is still working to me until now.
My device is SM-G950FD Dual XTC CRED build
sign into your google account (Must do)
and sign into your Samsung account
1)- change phone date manually back 10 days
2) go to settings - software update and check for update. You should receive errors messages sometime. Don't worry. Just ignore it.
3)- restart phone. After that go to settings -checking software update (when it says your phone is up to date) immediately go to Developer Options and you should see OEM Unlock appear back. You may need to try checking software update few times to get it work.
I tried that 2 days ago and it worked
So updated to latest CRG1 firmware hoping that would bring back OEM unlock function. Well it`s been over 3 weeks since update and still no OEM unlock option available.
Has this feature gone ???? It`s bootloader 3.
proven way 4 the oem unlock to reappear:
1. remove the sim card, factory reset
2. on setup screen, log in wifi, skip gmail, skip samsung account, skip the additional apps, set the time back 1 month (twice, because s8 will try to correct the time immediately)
3. untick automatically update, then check for update manually. then restart
4. sim card still out, phone self correct time, check for update manually again, then restart.
5. sim card still out, turn on developer mode, go on developer mode, wait 5 seconds n oem unlock is there.
immortel_la said:
proven way 4 the oem unlock to reappear:
1. remove the sim card, factory reset
2. on setup screen, log in wifi, skip gmail, skip samsung account, skip the additional apps, set the time back 1 month (twice, because s8 will try to correct the time immediately)
3. untick automatically update, then check for update manually. then restart
4. sim card still out, phone self correct time, check for update manually again, then restart.
5. sim card still out, turn on developer mode, go on developer mode, wait 5 seconds n oem unlock is there.
Click to expand...
Click to collapse
On CRG1, will try this out
Update: Nope, didnt work.
Soapy! said:
On CRG1, will try this out
Update: Nope, didnt work.
Click to expand...
Click to collapse
sometimes u need to repeat the whole process twice - 5 times T_T
immortel_la said:
sometimes u need to repeat the whole process twice - 5 times T_T
Click to expand...
Click to collapse
Same doesnt work for me without a sim in and on wifi
G950FXXU2CRED
Any luck?
Excellent news and a solution i havent found anywhere else yet!
Follow up from - https://forum.xda-developers.com/galaxy-s8/help/restore-imei-attempt-stock-rom-flash-t3802527
TL;DR attempted to re-root as soon as the bootloader unlocked. It all seemed to stick again, and got the big red message of doom again.
"Official Binaries Only" - Last time i was able to restore to at least switch on the phone to run down the rmm state timer to zero to flash again.
Tried the several methods of flashing through a locked bootloader (old BL file, quickly restart download mode and spam start on odin, etc) - literally nothing would allow me to flash anything that included the BL file. IMEI and baseband remained unknown. Phone went in drawer for a few days.
Just went and downloaded the latest XSA (Australia, Unbranded) build - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/XSA/ and guess what boys and girls?
This sucker flashes straight away with Odin 3.13.1
It has completely restored my IMEI and baseband, i now have full Cell connectivity again, and its all back and working again. OEM unlock is still disabled, Samsung Pay still locked out which is fine, but otherwise, i have gone from brick to fully working Exynos S8 again.
TL;DR IF YOU HAVE ISSUES WITH A BRICKED PHONE BECAUSE IT WONT LET YOU FLASH ANY STOCK ROMS TRY THAT ONE.
Thanks for the replies to my other threads trying to help out with this. Much appreciated.
Peace out.
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Ive had a few cracks at this now but the date keeps resetting itself when you reset the phone despite having the automatic update option switched off.
Thanks for the info tho ill keep trying.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, boot it and setup once. Then reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
kratosjohn said:
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, and reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
Click to expand...
Click to collapse
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash) - I used comsy as it is mentioned in hte post OREO S8 update. It allows TWRP to be flashed but maybe thats whats breaking everything else. Ill try magisk next.
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
UPDATE - Everything restored installed titanium backup root held. Rebooted phone aaaaaaaaand - "Only official released binaries are allowed to be flashed" - Back to square one. Will attempt same reflash now, but the root procedure kills everything. Back in download mode again. RMM State: Prenormal returned.
It is now succesfully flashing the stock rom in Odin 3.13.1 - Accidentally started it with Comsy and it DID NOT WORK. You MUST use the normal version to flash the rom im using.
Looks like we def have a stable way to refire up the phone again, and get around RMM state prenormal nice and quickly, so ill go ahead now and try and find whats going on with things breaking afterwards!
Thanks again guys.
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Funkmonkey said:
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash)
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
Click to expand...
Click to collapse
Someone should clean this up and get it stickied.
I imagine there are alot of users here with this same issue, after the CRED update we can't downgrade our bootloader, and in a panic you can get stuck here.
kratosjohn said:
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Looks like that wont be an issue any more to be honest this phone is now a backup thankfully so i can play around with it to my little hearts desire.
Im about to try the magisk install. SuperSU/Aroma definately breaking something somewhere. Or verity. I dont know but rooting the phone at the moment is killing it again.
Also, i have NOT lost IMEI or baseband this time. At the very least for Australian SN-G950F phones, this is a 100% flashable stock rom regardless of your RMM or phone status. I cannot say this for any other model in any other country on any other carrier, but this is all working for a carrier free Exynos S8.
Maybe y'all better archive the actual stock somewhere before someone realises theyve made a mistake somewhere and it gets pulled. Im definantly backing it up.
I just got that oem unlock trick to happen in 2 shutdown/restarts NOT reboots. BUT. I did NOT enable developer mode until i had disabled automatic time updates and turned the date back 8 days. The option came up instantly. Is something comparing a hardware clock deep in the system to a software clock in the os to and developer mode comparing something in between? Either way, on to reflash TWRP again now. This is a good day.
Click to expand...
Click to collapse
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Funkmonkey said:
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Click to expand...
Click to collapse
Have you found and used this after getting your phone setup right (w/twrp)?
I think you should flash magisk, then this after.
After I had this "panic" I flashed the custom rom I was aiming for (once RMM: Official). That rom has a kernel with the RMM state fixed/locked.
Maybe look for a custom kernel if you want root, I believe this is the fight we have to put up even on stock w/root.
Download the Australian stock rom and install it but do not recover IMEI or coverage. I think it's because my G950F (singlesim) cell phone thinks it's G950FD (double sim). This causes the cell phone to get confused and not recognize any imei or sim. Does anyone know how to fix it?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Do we need to factory rest or just reboot phone after we change date?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
Sorry i missed your reply i hope you got it fixed if not post again and ill see if i can help. Ive definantly gotten that oem unlock trick working which is awesome but its fiddly. I dont think it works if you turn on flight mode and you have to let the phone fight you between 'no automatic date and time' and the network forcing the time.
Of course now i cant get the oem unlock trick working...
RE the dual sim issue... i think you would need the stock rom specific to your model try sammobile, see if there is a CRED release for your model. I cant guarantee it will work tho.
kratosjohn said:
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Click to expand...
Click to collapse
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Smartphones13 said:
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Click to expand...
Click to collapse
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Funkmonkey said:
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Click to expand...
Click to collapse
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Smartphones13 said:
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Click to expand...
Click to collapse
I think we might be looking at different issues.
This is to fix a semi bricked phone that has locked up its bootloader. In the past to resurrect a samsung all you had to do was flash twrp and your new rom but since Oreo some funkiness has been added to the system which only lets you flash a stock rom, (i.e. restoring a phone to factory settings and software) via ODIN/HEIMDALL then it locks up the bootloader for a week so you CANNOT flash anything into the phone that modifies the bootloader (i.e. TWRP OR *any* rom) until its timer runs out. This is most likely an anti theft feature esp with samsung and google pay use as it means there is no way to easily break into a stolen phone and use it as normal, and reflashing breaks all of the security features of the phone (e-fuse) - no knox no samsung or google pay no samsung pass as your device is insecure and could spoof false banking details etc.
The rom i linked to is important as it is a new AUSTRALIAN unbranded STOCK rom, that for some reason you can flash OVER a locked bootloader, meaning you can resurrect (australian at the very least) SN-G950F phones (exynos)
If you already have a working phone and can get to your developer settings then most of this thread is irrelevant to you.
Now - OEM unlock - You just bought a brand new galaxy from samsung (or youre me and you bought a MINT second hand one from cash converters for $700 less) - your phone is factory standard and schmicky. THE BOOTLOADER IS LOCKED. THE RMM STATE SHOULD NOT be triggered. If right now you went to flash something it would fail.
So you go to about phone - software information and you tap 'build number' seven times to unlock developer mode. Hit back twice and developer mode will be at the bottom of settings.
Click into this and you should see without swiping down 'OEM UNLOCK' - If you enable this, you can then reboot straight into download mode (power vol down and bixby) and flash twrp or whatever rom.
If you dont see this option, you either have a snapdragon model (youre **** outta luck permanently) or RMM is PRENORMAL and you either have to try the unlock trick(s) or leave your phone SWITCHED ON for 1 week and it will unlock itself.
The biggest issue at the moment is that i keep breaking something after i attempt to root so not sure whats happening there so use major caution.
Now as i said the trick posted above to unlock without having to wait a week (which i think youre asking about) im now not sure how it works because i cant get it to work any more.
Automatic time and date off, set date back 8 days, reset the phone. Do this a couple of times, then turn on automatic date and time again. HERE THERE BE ISSUES. When i first did it - i switch off time and date and change then reset, when the phone came on, auto date and time was on again. Turn off, change date, reset. Again, its back on. Turn off, change date, reset. Its back on. I give up and leave it, and notice later the option was available, so it worked. I broke the phone, reflashed again, did the trick in ONE reboot. Fcked something again, reflashed, now auto time and date stays off and the trick wont work so i cant help you with that until someone comes up with more info im sorry! Its a bit zarbis.
Im not going too nuts trying to fix it as i now have a fully working stock backup phone that sits on DeX plugged into my bedroom tv full time and im not into custom roms, root keeps breaking the phone, and ive sonce replaced it with a mint S8+ that im not even THINKING about considering rooting until its replaced maybe next year. Its not as easy to get around anymore and thankfully a) picasa and hangouts are no longer stock apps and can be banished and b) you can now disable all the other built in apps natively so its now a lot more bearable with a totally stock phone.
Hi all, I have a G955F and upgraded it to CRG1. The problem is that there is no OEM unlock toggle to be found in the Developer Options section. I've tried to bypass the 7 day wait by changing dates and that didn't work. Is there any other process I could try besides waiting 7 days? All help is appreciated, apologize if this has been posted before.
It should be there.... I say u should wait for 7 days.
khawarjaved said:
It should be there.... I say u should wait for 7 days.
Click to expand...
Click to collapse
I found a way to get it back. Thank you for replying, though.
Soapy! said:
I found a way to get it back. Thank you for replying, though.
Click to expand...
Click to collapse
how did you get it back? i have tried some methods and none work.. though i am s9.
Soapy! said:
I found a way to get it back. Thank you for replying, though.
Click to expand...
Click to collapse
So can you pls tell us what solution you found. I'm facing the same Problem
Soapy! said:
I found a way to get it back. Thank you for replying, though.
Click to expand...
Click to collapse
Mental fireballs in your direction.
Sorry guys, I didn't get a notification for your replies. All I did was reflash my phone's firmware and then performed the calendar date trick.
I didn't get the OEM unlock option even after the 7 days wait, I am on latest firmware CRGH, can anyone help me out here??
Hariiii said:
I didn't get the OEM unlock option even after the 7 days wait, I am on latest firmware CRGH, can anyone help me out here??
Click to expand...
Click to collapse
Reflash CRGH FW via Odin, keep Sim in, perform date trick. BTW skip all account setup prompts after reflashing FW
Soapy! said:
Reflash CRGH FW via Odin, keep Sim in, perform date trick. BTW skip all account setup prompts after reflashing FW
Click to expand...
Click to collapse
Should I flash HOME_CSC or CSC ??
Soapy! said:
Hi all, I have a G955F and upgraded it to CRG1. The problem is that there is no OEM unlock toggle to be found in the Developer Options section. I've tried to bypass the 7 day wait by changing dates and that didn't work. Is there any other process I could try besides waiting 7 days? All help is appreciated, apologize if this has been posted before.
Click to expand...
Click to collapse
Try
1.set day 10 ago (dis automatic)
2.dis download updates automatic
3.click download updates manually
4.reboot
5.set day 10 ago agin
6.check OEM
Soapy! said:
Reflash CRGH FW via Odin, keep Sim in, perform date trick. BTW skip all account setup prompts after reflashing FW
Click to expand...
Click to collapse
I tried flashing CRG1 and CRGB as well as CRGH, I am not able to get the oem unlock option after the date trick. Any help??
So I am thinking to stick to the old firmware with bootloader version 3, can you tell me which one is older CRG1 or CRGB??
New Update
I again refalshed CRG1 which is the older one with bootloader version 3, then I tried this date trick, first it actually did not work. So I tried and monitored my procedure every time. It worked finally. Here is the step by step guide,
1. Reflash the firmware and skip all account setups
2. Now change the date 20 days back
3. Now go and enable developer options
4. Check for OEM unlock(probably won't be there), now disable Auto update system
5. Software update option, disable automatic updates
6. Click on update manually(now you will see registering device toast message and a persistent device configuration notification), it will show you there is an update based on your region(I downloaded Poland region firmware). Most of the post about OEM unlock says you will get an error here due to date issue, but you won't get any errors.
7. Now do this step as fast as you can, again check for OEM option in developer settings((probably won't be there)), and reboot.
8. You should again see the persistent device configuration notification, Turn off wifi/data immediately. Now your date must have probably changed to current date even though you changed it earlier, change the date again, now when the notification goes off, go to software updates, turn the data/wifi on. check for software updates.
9. Now go to developer options you should see OEM unlock option.
If it doesn't work, shuffle up the step 8 instructions, like check for software updates first, then change the date and vice versa.
Samsung got a ****ty logic written under the code over there, but its messy. So I tried this multiple times just to make sure no one else end up with this issue. It worked for me probably it should work for others.
Better download the Poland firmware CRG1 and try it.
Thanks.
credits to @soapy
U dont need trial and error for this.
1. Enable developer options and check if OEM Unlock is already visible, if not proceed below.
2. Disable auto software update and mobile data to prevent auto date correction.(Leave wifi on)
3. Adjust your datetime to previous dates, let's say Month of May 15th, 2018.
4. Do Software Update manually, do multiple taps so that Software Update process will appear.
5. It should display an error in software update.(Let if fail)
6. Reboot
7. Once rebooted, change the datetime to older dates.(since date will revert back to present)
8. OEM Option should be in the developer options.
Im using the CRGH build, and it never fails me. never waited for 7+days idle phone,no trial and error, I just follow the simple steps above and OEM Unlock never disappears in my end , it was never "patched" as others have told.
Using XTC/SMA/GLB region firmware CRGH build, SM-G950FD..
Note:
I reverted back to stock due to NETFLIX and other related streaming premium apps not playing HD+ content. No workaround or permanent solution on this yet. I'm paying premium 4K hd content so it would be a waste of money playing netflix content on rooted device with just SD video.
I've rooted PIE I'm sure I've flashed rmm bypass (but it was v2 ) but now I restarted phone It says "Only official released binaries are allowed to be flashed " and "KG staterenormal " at DL mode I'm gonna Flash rom with Home_csc
THEN
Flashed with both CSC's It boots to a blue system update screen then at updating %32 it says erasing then boots to stucked boot.
EDIT: Maybe a solve: Did a wipe at native recovery now booted but I'm not sure about rebooting :/.
I'll wait 7 days before a reboot If this RMM (or KG with its new name) state turns off will I see OEM unlock option at Dev Settings or should I go to DL mode?
( Btw I hate Samsung WHY CANT I USE MY PHONE WITH ROOT )
1 more Edit : In dev settings I can see OEM lock its unlocked anyway I'll wait 7 days
To get past the 7day wait, turn off auto update system in developer options. Turn off auto date and time. Set date back 9days then go to software update and check for an update...after its done checking for update reboot. Go to software update check for update again it should say the date you set 9days ago. Go to developer options OEM unlock should be there and prenormal should be gone. I have done this numerous numerous tines and it works no 7day wait.
Sent from my SM-N935F Note FE
I Found that this does not work on Pie. I went back to Oreo and it works.
Sent from my SM-N935F Note FE
how to return pie to oreo
butchieboy said:
To get past the 7day wait, turn off auto update system in developer options. Turn off auto date and time. Set date back 9days then go to software update and check for an update...after its done checking for update reboot. Go to software update check for update again it should say the date you set 9days ago. Go to developer options OEM unlock should be there and prenormal should be gone. I have done this numerous numerous tines and it works no 7day wait.
Sent from my SM-N935F Note FE
Click to expand...
Click to collapse
how to return pie to oreo
You can use Samfirm tool or Sammobile to download latest Oreo then flash with Odin. I go back and forth all the time.
Sent from my Still Rooted NOTE 8
Went back to Oreo for the customization.View attachment 4736772
Sent from my SM-N935F Note FE
butchieboy said:
To get past the 7day wait, turn off auto update system in developer options. Turn off auto date and time. Set date back 9days then go to software update and check for an update...after its done checking for update reboot. Go to software update check for update again it should say the date you set 9days ago. Go to developer options OEM unlock should be there and prenormal should be gone. I have done this numerous numerous tines and it works no 7day wait.
Sent from my SM-N935F Note FE
Click to expand...
Click to collapse
Finally got to this and I was "prenormal" ... This trick is FANTASTIC!!! Thanks!
What I did was customized Oreo..did a backup moved backup to sd card then flashed the rom..that way I can bounce between 2 versions..makes FE wonderful to have.
Sent from my SM-N960U using Tapatalk