Excellent news and a solution i havent found anywhere else yet!
Follow up from - https://forum.xda-developers.com/galaxy-s8/help/restore-imei-attempt-stock-rom-flash-t3802527
TL;DR attempted to re-root as soon as the bootloader unlocked. It all seemed to stick again, and got the big red message of doom again.
"Official Binaries Only" - Last time i was able to restore to at least switch on the phone to run down the rmm state timer to zero to flash again.
Tried the several methods of flashing through a locked bootloader (old BL file, quickly restart download mode and spam start on odin, etc) - literally nothing would allow me to flash anything that included the BL file. IMEI and baseband remained unknown. Phone went in drawer for a few days.
Just went and downloaded the latest XSA (Australia, Unbranded) build - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/XSA/ and guess what boys and girls?
This sucker flashes straight away with Odin 3.13.1
It has completely restored my IMEI and baseband, i now have full Cell connectivity again, and its all back and working again. OEM unlock is still disabled, Samsung Pay still locked out which is fine, but otherwise, i have gone from brick to fully working Exynos S8 again.
TL;DR IF YOU HAVE ISSUES WITH A BRICKED PHONE BECAUSE IT WONT LET YOU FLASH ANY STOCK ROMS TRY THAT ONE.
Thanks for the replies to my other threads trying to help out with this. Much appreciated.
Peace out.
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Ive had a few cracks at this now but the date keeps resetting itself when you reset the phone despite having the automatic update option switched off.
Thanks for the info tho ill keep trying.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, boot it and setup once. Then reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
kratosjohn said:
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, and reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
Click to expand...
Click to collapse
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash) - I used comsy as it is mentioned in hte post OREO S8 update. It allows TWRP to be flashed but maybe thats whats breaking everything else. Ill try magisk next.
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
UPDATE - Everything restored installed titanium backup root held. Rebooted phone aaaaaaaaand - "Only official released binaries are allowed to be flashed" - Back to square one. Will attempt same reflash now, but the root procedure kills everything. Back in download mode again. RMM State: Prenormal returned.
It is now succesfully flashing the stock rom in Odin 3.13.1 - Accidentally started it with Comsy and it DID NOT WORK. You MUST use the normal version to flash the rom im using.
Looks like we def have a stable way to refire up the phone again, and get around RMM state prenormal nice and quickly, so ill go ahead now and try and find whats going on with things breaking afterwards!
Thanks again guys.
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Funkmonkey said:
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash)
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
Click to expand...
Click to collapse
Someone should clean this up and get it stickied.
I imagine there are alot of users here with this same issue, after the CRED update we can't downgrade our bootloader, and in a panic you can get stuck here.
kratosjohn said:
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Looks like that wont be an issue any more to be honest this phone is now a backup thankfully so i can play around with it to my little hearts desire.
Im about to try the magisk install. SuperSU/Aroma definately breaking something somewhere. Or verity. I dont know but rooting the phone at the moment is killing it again.
Also, i have NOT lost IMEI or baseband this time. At the very least for Australian SN-G950F phones, this is a 100% flashable stock rom regardless of your RMM or phone status. I cannot say this for any other model in any other country on any other carrier, but this is all working for a carrier free Exynos S8.
Maybe y'all better archive the actual stock somewhere before someone realises theyve made a mistake somewhere and it gets pulled. Im definantly backing it up.
I just got that oem unlock trick to happen in 2 shutdown/restarts NOT reboots. BUT. I did NOT enable developer mode until i had disabled automatic time updates and turned the date back 8 days. The option came up instantly. Is something comparing a hardware clock deep in the system to a software clock in the os to and developer mode comparing something in between? Either way, on to reflash TWRP again now. This is a good day.
Click to expand...
Click to collapse
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Funkmonkey said:
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Click to expand...
Click to collapse
Have you found and used this after getting your phone setup right (w/twrp)?
I think you should flash magisk, then this after.
After I had this "panic" I flashed the custom rom I was aiming for (once RMM: Official). That rom has a kernel with the RMM state fixed/locked.
Maybe look for a custom kernel if you want root, I believe this is the fight we have to put up even on stock w/root.
Download the Australian stock rom and install it but do not recover IMEI or coverage. I think it's because my G950F (singlesim) cell phone thinks it's G950FD (double sim). This causes the cell phone to get confused and not recognize any imei or sim. Does anyone know how to fix it?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Do we need to factory rest or just reboot phone after we change date?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
Sorry i missed your reply i hope you got it fixed if not post again and ill see if i can help. Ive definantly gotten that oem unlock trick working which is awesome but its fiddly. I dont think it works if you turn on flight mode and you have to let the phone fight you between 'no automatic date and time' and the network forcing the time.
Of course now i cant get the oem unlock trick working...
RE the dual sim issue... i think you would need the stock rom specific to your model try sammobile, see if there is a CRED release for your model. I cant guarantee it will work tho.
kratosjohn said:
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Click to expand...
Click to collapse
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Smartphones13 said:
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Click to expand...
Click to collapse
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Funkmonkey said:
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Click to expand...
Click to collapse
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Smartphones13 said:
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Click to expand...
Click to collapse
I think we might be looking at different issues.
This is to fix a semi bricked phone that has locked up its bootloader. In the past to resurrect a samsung all you had to do was flash twrp and your new rom but since Oreo some funkiness has been added to the system which only lets you flash a stock rom, (i.e. restoring a phone to factory settings and software) via ODIN/HEIMDALL then it locks up the bootloader for a week so you CANNOT flash anything into the phone that modifies the bootloader (i.e. TWRP OR *any* rom) until its timer runs out. This is most likely an anti theft feature esp with samsung and google pay use as it means there is no way to easily break into a stolen phone and use it as normal, and reflashing breaks all of the security features of the phone (e-fuse) - no knox no samsung or google pay no samsung pass as your device is insecure and could spoof false banking details etc.
The rom i linked to is important as it is a new AUSTRALIAN unbranded STOCK rom, that for some reason you can flash OVER a locked bootloader, meaning you can resurrect (australian at the very least) SN-G950F phones (exynos)
If you already have a working phone and can get to your developer settings then most of this thread is irrelevant to you.
Now - OEM unlock - You just bought a brand new galaxy from samsung (or youre me and you bought a MINT second hand one from cash converters for $700 less) - your phone is factory standard and schmicky. THE BOOTLOADER IS LOCKED. THE RMM STATE SHOULD NOT be triggered. If right now you went to flash something it would fail.
So you go to about phone - software information and you tap 'build number' seven times to unlock developer mode. Hit back twice and developer mode will be at the bottom of settings.
Click into this and you should see without swiping down 'OEM UNLOCK' - If you enable this, you can then reboot straight into download mode (power vol down and bixby) and flash twrp or whatever rom.
If you dont see this option, you either have a snapdragon model (youre **** outta luck permanently) or RMM is PRENORMAL and you either have to try the unlock trick(s) or leave your phone SWITCHED ON for 1 week and it will unlock itself.
The biggest issue at the moment is that i keep breaking something after i attempt to root so not sure whats happening there so use major caution.
Now as i said the trick posted above to unlock without having to wait a week (which i think youre asking about) im now not sure how it works because i cant get it to work any more.
Automatic time and date off, set date back 8 days, reset the phone. Do this a couple of times, then turn on automatic date and time again. HERE THERE BE ISSUES. When i first did it - i switch off time and date and change then reset, when the phone came on, auto date and time was on again. Turn off, change date, reset. Again, its back on. Turn off, change date, reset. Its back on. I give up and leave it, and notice later the option was available, so it worked. I broke the phone, reflashed again, did the trick in ONE reboot. Fcked something again, reflashed, now auto time and date stays off and the trick wont work so i cant help you with that until someone comes up with more info im sorry! Its a bit zarbis.
Im not going too nuts trying to fix it as i now have a fully working stock backup phone that sits on DeX plugged into my bedroom tv full time and im not into custom roms, root keeps breaking the phone, and ive sonce replaced it with a mint S8+ that im not even THINKING about considering rooting until its replaced maybe next year. Its not as easy to get around anymore and thankfully a) picasa and hangouts are no longer stock apps and can be banished and b) you can now disable all the other built in apps natively so its now a lot more bearable with a totally stock phone.
Related
Hello fellow people of XDA!
Today I got an OTA update for my S7 edge (SM-G935F). The update has installed fairly fast (after the first reboot). But then, it got stuck on a decrypting loop. I have enabled prior the full phone encryption, and set it to ask for a password at each start. I entered the password correctly, as it said Starting Android... after, and since then, only the rotating padlock is showing. Every like 5 minutes the soft buttons are lighting up for a second, but then nothing is happening. After a while it even gets hot, but still nothing. I had this issue at the previous update too, but it started after like 30-40 minutes. Now 90 minutes have passed and still nothing.
I can reboot to the recovery and bootloader screens, and everything is fine. Knox not tripped, not rooted, everything official. In the recovery screen it says that my CSC is ECT (but according to sammobile it should be CNX).
Some additional info: samsung/hero2ltexx/hero2lte
7.0/NRD90M/G935FXXU2DRAG
I will try to flash a stock rom (PDA: G935FXXS2DRAA, CSC: G935FROM1DQJ3). If that doesn't work, I'll flash today's rom (PDA: same, CSC: G935FVFG1DQI1).
Any tips/help would be greately appreciated! Would not want to fall to the wipe data method, because I don't want to lose everything... But then again, I guess that would remove the boot password...
Thanks!
Update: After waiting for like 10+ hours, nothing has changed. Maybe I shouldn't have forced a reboot after an hour of the ota update? Going to try flashing the firmware now.
Update 2: I flashed the firmware, now the buttons seem to light up less often. But after an hour of decrypting, I guess the ultimate soultion would be to do a factory reset, since no one is helping...
jaszfalvi.tamas said:
Hello fellow people of XDA!
Today I got an OTA update for my S7 edge (SM-G935F). The update has installed fairly fast (after the first reboot). But then, it got stuck on a decrypting loop. I have enabled prior the full phone encryption, and set it to ask for a password at each start. I entered the password correctly, as it said Starting Android... after, and since then, only the rotating padlock is showing. Every like 5 minutes the soft buttons are lighting up for a second, but then nothing is happening. After a while it even gets hot, but still nothing. I had this issue at the previous update too, but it started after like 30-40 minutes. Now 90 minutes have passed and still nothing.
I can reboot to the recovery and bootloader screens, and everything is fine. Knox not tripped, not rooted, everything official. In the recovery screen it says that my CSC is ECT (but according to sammobile it should be CNX).
Some additional info: samsung/hero2ltexx/hero2lte
7.0/NRD90M/G935FXXU2DRAG
I will try to flash a stock rom (PDA: G935FXXS2DRAA, CSC: G935FROM1DQJ3). If that doesn't work, I'll flash today's rom (PDA: same, CSC: G935FVFG1DQI1).
Any tips/help would be greately appreciated! Would not want to fall to the wipe data method, because I don't want to lose everything... But then again, I guess that would remove the boot password...
Thanks!
Update: After waiting for like 10+ hours, nothing has changed. Maybe I shouldn't have forced a reboot after an hour of the ota update? Going to try flashing the firmware now.
Update 2: I flashed the firmware, now the buttons seem to light up less often. But after an hour of decrypting, I guess the ultimate soultion would be to do a factory reset, since no one is helping...
Click to expand...
Click to collapse
Wait, i dont get it, it is prompting you for a password even you didnt set it?
Sent from my S7 Edge using XDA Labs
shah22 said:
Wait, i dont get it, it is prompting you for a password even you didnt set it?
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I set a password when I enabled Secure Startup.
jaszfalvi.tamas said:
I set a password when I enabled Secure Startup.
Click to expand...
Click to collapse
Then use that same password, i think there is confusion, there is a password when you enable fingerprint and then a password when you enable secure startup. Be sure not to confuse them. If it still happens, then I guess there's got something wrong with the update, and only way is a factory reset. Btw, i also updated and i normally entered secure boot password and it started okay. Don't know what caused this for you.
Sent from my S7 Edge using XDA Labs
shah22 said:
Then use that same password, i think there is confusion, there is a password when you enable fingerprint and then a password when you enable secure startup. Be sure not to remember them. If it still happens, then I guess there got something wrong with the update, and only way is a factory reset. Btw, i also updated and i normally entered secure boot password and it started okay. Don't know what caused this for you.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I entered the password correctly, as it stated "Starting Android..." then the rotating padlock took forever. More than 10 hours even. But in the end, a factory reset helped me. But rip my photos and memories...
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
benjamen50 said:
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
Click to expand...
Click to collapse
Right, but i use encryption and i could update without any problem, don't know what caused this issue with him. But one should backup all data BEFORE updating, as i did to save yourself from such hassle.
Sent from my S7 Edge using XDA Labs
benjamen50 said:
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
Click to expand...
Click to collapse
Yeah, it's a sure thing I won't turn on Secure Stratup anymore. I don't know what OEM unlock does or does not, but right now, I don't have dev options enabled. If I had a microSD then I couldn't care less about resetting my phone, but since I don't have, because I have two SIM cards and a memory card has no place left, I feel bad.
Still, I don't know caused this issue. I had OTA updates before with full device encryption enabled and I had no issues before. I kinda used the same disk space at every OTA, so it should have took the same time... And I have to mention, that I did not tamper with the software. No root, no custom rom, and software only from the play store.
To enable developer options you click Build number 7 times which is located in the Software information tab in settings.
OEM unlock allows you to flash and boot the phone with custom binaries (Custom Recovery, Kernels, Roms). You can leave OEM unlock disabled if you don't want people that may steal your phone and use it for themselves.
With OEM unlock disabled and a google account signed in, it will block anyone from using the phone after a factory reset on stock Samsung firmware as it will prompt the user to enter the google account that was associated with that device.
Unfortunately there are rare cases that a OTA update may fail. Reflashing correct stock firmware usually fixes it but in worse case scenarios a factory reset will be required.
benjamen50 said:
To enable developer options you click Build number 7 times which is located in the Software information tab in settings.
OEM unlock allows you to flash and boot the phone with custom binaries (Custom Recovery, Kernels, Roms). You can leave OEM unlock disabled if you don't want people that may steal your phone and use it for themselves.
With OEM unlock disabled and a google account signed in, it will block anyone from using the phone after a factory reset on stock Samsung firmware as it will prompt the user to enter the google account that was associated with that device.
Unfortunately there are rare cases that a OTA update may fail. Reflashing correct stock firmware usually fixes it but in worse case scenarios a factory reset will be required.
Click to expand...
Click to collapse
Never had OEM unlock enabled, because I didn't know what is does, so thanks for the info. I reflashed the correct stock firmware, but that didn't help either, so I had to resort to wiping the data... Regarding this, do you know by any chance a good software for recovering data without root?
I don't know of any unfortunately, if anyone has any good paid ones that actually work please post here.
Alright so im dead set on rooting my phone once i realised why the **** not. Im used to jailbreaking iphones and i used to do that alot. (man its so much more complicated on android).
and im god damn stuck on the first step already.
the freaking OEM unlock option is missing??? Im into the developer mode. its not there. Now i know you have to wait 7 Days, but ive had the phone for 2 months. Is it because Ive just updated it to oreo and it reset that timer so now i have to wait seven days... (im sadly a pretty impatient person, im trying to do this at 2am instead of sleeping)
I have an international version and i know its possible. Ive got the SM-G950F Model
Please help. theres so many different guides for so many separate things and old posts and different phones and models and situations.. :c
Same problem here. BUMP!!!
I have also the same problem. my model is G955f Exynos. after flashing official Oreo Rom, CRB7, then updating that to CRE3, I can flash nothing again, not TWRP, not Cf-root, not even nougat Rom. I have tried different versions of Odin, TWRP, and Cf-root but no result. And there is also no damn OEM unlock in Developers options. Does anyone have any solution?
someone has posted here a software named "Cygwin". Its Linux tool, so hard and complicated to use for me.
If anyone can find how to use "Cygwin" to erase Nand and flash again, please reply.
the post Address is this;
https://forum.xda-developers.com/chef-central/android/nand-write-start-fail-odin-soluction-t2851096
Go into the settings and turn off auto-detect time. And time to transfer a month ago. Next, the developer options disable auto-update. Then go into the firmware update to disable the automatic download and click on download updates. Reboot the device and it will appear. I always do that !!!
altai1963 said:
Go into the settings and turn off auto-detect time. And time to transfer a month ago. Next, the developer options disable auto-update. Then go into the firmware update to disable the automatic download and click on download updates. Reboot the device and it will appear. I always do that !!!
Click to expand...
Click to collapse
Of all the instructions i have read.
This one is the best and working answer.
Thank you so much for your idea
1. Disable auto date/time.
2. I set my date 1 or 2 previous months ago.
3. In developer options, I disabled auto system update.
4. In Software update menu, I disable auto download update.
5. Lastly, click the "manually download update" ,I received an error but that's okay.
6. Reboot.
Voila i got my OEM Unlock option without waiting for 7 days or so
batuzai04123 said:
Of all the instructions i have read.
This one is the best and working answer.
Thank you so much for your idea
1. Disable auto date/time.
2. I set my date 1 or 2 previous months ago.
3. In developer options, I disabled auto system update.
4. In Software update menu, I disable auto download update.
5. Lastly, click the "manually download update" ,I received an error but that's okay.
6. Reboot.
Voila i got my OEM Unlock option without waiting for 7 days or so
Click to expand...
Click to collapse
Do you know if this method works with Galaxy Note 8, too?
burduli said:
Do you know if this method works with Galaxy Note 8, too?
Click to expand...
Click to collapse
I don't have Note 8 so I can't be sure but there's no harm with the steps I mentioned.
I actually tried to re flash it clean again(for the 2nd time) with Odin, and @altai1963's trick work again.
Why need 7 or more days when you can do this?
Just try it and let others know if it works for Note 8
Goodluck!
batuzai04123 said:
I don't have Note 8 so I can't be sure but there's no harm with the steps I mentioned.
I actually tried to re flash it clean again(for the 2nd time) with Odin, and @altai1963's trick work again.
Why need 7 or more days when you can do this?
Just try it and let others know if it works for Note 8
Goodluck!
Click to expand...
Click to collapse
I don't own Note 8. I needed it for the article, it will be published on the XDA portal in a couple of minutes.
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
dogsfoot said:
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
Click to expand...
Click to collapse
You just need to make sure your date doesnt revert to current date time after you reboot.
Can you try turning off the sim slot? or airplane mode(then turn wifi on)so that wifi is the only wireless connection u have.
I believe mobile data/sim network auto. adjusts ur time. Let me know if this works
batuzai04123 said:
You just need to make sure your date doesnt revert to current date time after you reboot.
Can you try turning off the sim slot? or airplane mode(then turn wifi on)so that wifi is the only wireless connection u have.
I believe mobile data/sim network auto. adjusts ur time. Let me know if this works
Click to expand...
Click to collapse
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
dogsfoot said:
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
Click to expand...
Click to collapse
Same thing happenig to me...doesn't matter if i even turn the wifi off and take out the sim card, after reboot it shows the current date.
Any confirmation whatsoever on the Note 8? Have people seriously been so scared off by the OEM Unlock issue that no-one has bought a new one recently, lol???
dogsfoot said:
Does not work for me. Every time I reboot it shows todays date and no OEM unlock.
I go to "date and time" and set to 6 weeks ago, press done.
Disable auto update time.
Disable Auto update system
Disable download updates automatically
press download manually, get error "couldn`t download update"
reboot, and time goes back to today.
What am I doing wrong.
Click to expand...
Click to collapse
dogsfoot said:
Nope, same issue. Airplane mode, no sim,
could be that i have june update installed ???
I can set time forward and it stays set but going back always reverts to 26th june for some reason. not even todays date.
edit: ok, think i`ve solved it. I re-flashed stock firmware on Monday as I had "only official binaries" error, could that be why I cant go back further than a couple of days? It`s the only thing i can think of why I have this problem.
Click to expand...
Click to collapse
Sorry I cant help u with that where DATE & TIME is not sticking after reboot.
Im not sure whats the real cause but for me, the steps / bypass for OEM Unlock option is still working to me until now.
My device is SM-G950FD Dual XTC CRED build
sign into your google account (Must do)
and sign into your Samsung account
1)- change phone date manually back 10 days
2) go to settings - software update and check for update. You should receive errors messages sometime. Don't worry. Just ignore it.
3)- restart phone. After that go to settings -checking software update (when it says your phone is up to date) immediately go to Developer Options and you should see OEM Unlock appear back. You may need to try checking software update few times to get it work.
I tried that 2 days ago and it worked
So updated to latest CRG1 firmware hoping that would bring back OEM unlock function. Well it`s been over 3 weeks since update and still no OEM unlock option available.
Has this feature gone ???? It`s bootloader 3.
proven way 4 the oem unlock to reappear:
1. remove the sim card, factory reset
2. on setup screen, log in wifi, skip gmail, skip samsung account, skip the additional apps, set the time back 1 month (twice, because s8 will try to correct the time immediately)
3. untick automatically update, then check for update manually. then restart
4. sim card still out, phone self correct time, check for update manually again, then restart.
5. sim card still out, turn on developer mode, go on developer mode, wait 5 seconds n oem unlock is there.
immortel_la said:
proven way 4 the oem unlock to reappear:
1. remove the sim card, factory reset
2. on setup screen, log in wifi, skip gmail, skip samsung account, skip the additional apps, set the time back 1 month (twice, because s8 will try to correct the time immediately)
3. untick automatically update, then check for update manually. then restart
4. sim card still out, phone self correct time, check for update manually again, then restart.
5. sim card still out, turn on developer mode, go on developer mode, wait 5 seconds n oem unlock is there.
Click to expand...
Click to collapse
On CRG1, will try this out
Update: Nope, didnt work.
Soapy! said:
On CRG1, will try this out
Update: Nope, didnt work.
Click to expand...
Click to collapse
sometimes u need to repeat the whole process twice - 5 times T_T
immortel_la said:
sometimes u need to repeat the whole process twice - 5 times T_T
Click to expand...
Click to collapse
Same doesnt work for me without a sim in and on wifi
G950FXXU2CRED
Any luck?
Morning Guys,
Ive had all sorts of fun and games with this damn G950F every time i root it it throws up a problem.
It had just gotten to unlock time for the third time, but started throwing up 'SystemUI has stopped working' errors when i hit the 'app list' button. Didnt think much of it, and went to root. SuperSU took and was granting root permissions but would not update the binary. I fell asleep at some stage and didnt go back to it until this morning.
Went to use the phone this morning and its reset itself and thrown up a big red message about only having stock binaries installed. Queue about 7 hours of not being able to resurrect a phone that had spat out TWRP and now appeared to have a locked down bootloader again. Finally realised i could flash the stock XSA rom without the bootloader and resurrected the phone.
Fired it up, and its no longer detecting the SIM card, and *all* of the Mobile Network settings are missing. Cant find an answer to this anywhere. Im hoping like hell its a software issue (another non answered question i have is that i get weird ass settings options with strange labels and duplicate entries and options that crash the settings app after some re-flashes.
Anyway.. wat do plez?
Have tried - Factory resets and cache wipes both in UI and recovery. Reflashing AP, CP, CSC and/or CSC_HOME. Cant flash BL as its currently 'prenormal'. Keep reading the 'download mode, start odin, quickly hit buttons' trick but have never gotten it to work, and ill try it again right now to triple check but im 99.9999% sure it wont let me re-flash Nougat on it for the same reason.
Cheers in advance.
UPDATE - So it looks like something has accidentally'd the IMEI. Now looking for non root non bootloader methods to bring it back. Looks like thats my problem.
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha
Hey all,
I have the dreaded KG State: Prenormal
firstly i rooted my device, installed TWRP, and then Flash a ROM and No Verify etc...
which worked fine
i was messing around and broke it so thought id just flash the rom again
formatted all the data. and installed the rom again.
this time i didnt flash the No Verify
and in the settings of the rom i installed the Pie Bootloader (Silly Me)
Booting into the Rom, i had no Signal or anything, so thought id reboot my device
ended up soft bricking it ( only official binaries are allowed to be flashed)
I eventually read up on the information here.
worked out i had to Flash back to Stock
Flashed Back to Stock.
Android Pie now as Bootloader is now Version 6 so i have to use Pie (XSA-G950FXXS6DSL3)
Just want to know, if its still the same 7 Days and will reset my KG State
or if it wont come back now.
its odd because under Developer Menu, i still have OEM Unlocking and can turn it on and off
however cant flash TWRP.
should i be leaving OEM unlocking off?
should i flash and then do a Full Wipe again?
what is the next step now?
Thanks to anyone who replies
TL;DR
Soft Brick my S8 Pie Boot-loader
KG Stage PreNormal
will it still take 7 days to reset this?
Jackstuart555 said:
TL;DR
Soft Brick my S8 Pie Boot-loader
KG Stage PreNormal
will it still take 7 days to reset this?
Click to expand...
Click to collapse
you must be a long time lurker or a member of other forums for your first post to have TL;DR in it and for you to have successfully rooted etc etc etc
anyways, yes. You have to wait 168 hours from the time you flashed the stock firmware. The thing youre running into is that the toggle will only let you switch it once per firmware flash. You will need to Odin restore the device back to stock with the CSC not HOME_CSC. Boot, enter your credentials, let it do its thing for 168 hours, then enable dev options and then toggle the unlock.
Did this method work? I waited 168h without sim or wifi but the kg state was still prenormal.
No this didn't work
waited 168 hours (175h)
still in KG State Prenormal
I have now flashed again stock firmware, went into recovery mode and wipe cache/ wipe data/factory reset
although says my firmware info was not valid down the bottom of the recovery
not to sure what is going on
anyway starting my 168H again see what happens
Jackstuart555 said:
I have now flashed again stock firmware, went into recovery mode and wipe cache/ wipe data/factory reset
although says my firmware info was not valid down the bottom of the recovery
not to sure what is going on
anyway starting my 168H again see what happens
Click to expand...
Click to collapse
I hope this will work.
I'm in the exact same situation as you with my SM-G950F.
6 months I've been trying to root my phone again.
Mahiem said:
I hope this will work.
I'm in the exact same situation as you with my SM-G950F.
6 months I've been trying to root my phone again.
Click to expand...
Click to collapse
Did it work?
Jackstuart555 said:
I have now flashed again stock firmware, went into recovery mode and wipe cache/ wipe data/factory reset
although says my firmware info was not valid down the bottom of the recovery
not to sure what is going on
anyway starting my 168H again see what happens
Click to expand...
Click to collapse
set the time to 8 days before the actual day and it should let you flash anything, at least it was like that in my case lol
Mahiem said:
Did it work?
Click to expand...
Click to collapse
no, still KG State Prenormal
think its screwed until a new way to get around it, is found
Jackstuart555 said:
no, still KG State Prenormal
think its screwed until a new way to get around it, is found
Click to expand...
Click to collapse
Damn! I heard that the only way to do it is by a paid service. I'm too stubborn to pay for this.
We'll have to be patient I guess.
anyone who fixed this issue?