Related
So I visited my local Walmart and discovered a car charger, designed for Blackberry 6200 through 7500 and Motorola RAZR series phones.
The connector is the same, mini USB B.
$25,000 Question: Can I use this to charge my TMO MDA? Same connection, just worried the voltage or wiring might not be the same.
The AC chargers that came with my Razr and MDA are the same voltage-wise (5V) but not the same Amps.
MDA is 5V 1A, Razr is 5V 0.5A, they are not the same
However, it shouldn't damage the battery, just charge slower.
Just so you know, USB ports output 5V at 0.5A as well.
Edit: Sorry, I realize I completely changed my post, but didn't want incorrect info out there.
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
fuzzie said:
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
Click to expand...
Click to collapse
Don't expect it to charge if you battery is below 30-20% charge. I'm not sure why this is an issue but it has bitten me in the rear once already.
Does anybody know why it's a problem for "less-than-1amp" chargers to charge back from the low threshold?
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
oconnor.jb said:
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
Click to expand...
Click to collapse
That's not true,... if you use the VersaCharger like I do. This is where I learned of the "charging only" cable that Boxwave sells (how conveinent) and then they sell a Sync/charger for USB only. I have a Boxwave VersaCharger that I can't use without buying their "cable" to make it charge the 8125. I found this out because I have a Belkin retractable sync/charge cable that doesn't work with the VersaCharger as I had hoped. The cable that you have may work with 1amp charger but it probably won't work with theVersaCharger.
What is the output on the "min-usb" connector end of the cable? This sounds like the cable that I need for the 2 devices that I use.
...I wonder if they are putting some electronics in the cable connector...?
I bought the bundle that had a car charger (I have the regular; not the high output; not the Versa) and two mini-Sync (retractable) cables. I got caught by the fact that one of them is "charging only" when I was trying to use the "charging only" cable between my laptop and my TI-84plus calculator. I switched to the mini-USB cable that came with my calculator, and it worked fine, as did my phone with AS. That's when I looked closer at the two mini-sync cables and noticed that one was for "charging only". So, that mini-sync cable (the charging only) stays in the car, and works fine for charging my phone or my GBH-820. The really odd thing is that the "charging only" cable looks "thicker" than the one that works for syncing. Maybe lower gauge wire to help the higher current flow easier.
I have also used my other USB-miniUSB cables with my car adapter. E.g. the cable that came with the phone, the cable that came with my TI-84plus calculator.
My Bluetake headphones came with their own USB cable that has, for lack of any better term, an ultraminiUSB (or some kind of proprietary connector, cause it's not marked with a USB symbol like the other cables) plug at the end. I just plug the regular USB end of that cable into the car charger, and it charges the Bluetake's just fine.
Excellent car charger for Wizard
I have purchased and used the "Ecovell 4x USB" adapter on both a Wizard and a Universal. It provides a 2 Amp output which is equivalent to the AC adapter and works with any mini-USB cable. It will charge a Universal from absolutely dead which I have not been able to do with any other adapter. Here is the link to the item on Yes Depot:
http://www.yesdepot.com/product/ud0520.html
I've ordered from them and the service was OK. I haven't seen the item available anywhere else.
Regards,
Dave
I drive a prius with an AUX adapter (accepts a minjack) does anyone know of a cable that is a mini USB to mini jack?
Thanks!
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
evilc said:
you need a male USB to female 3.5mm adapter. Often, they come as male USB to both female 3.5mm and female USB. Many, many sites have them. Search for "USB audio splitter" or somthing like that.
Once you have one of those, you need a standard male 3.5mm to male 3.5mm headphone cable.
I have never seen a male USB to male 3.5mm cable.
Also, indicating which country you are in when asking where to buy something often helps, this is an international forum
Click to expand...
Click to collapse
Sorry...I'm in the US.
Hey Griffin911, from one Prius driver to another.
Try http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=776
Then you will just need a male to male 3.5 mm adapter which you should be able to find at any Radio Shack. I am using this Seidio adapter with a set of Shure earbuds with my Kaiser and it works fine.
I haven't tried it on the Pruis's aux port yet, I travel through the week and haven't had as much time to play with it as I'd like. I'll do it when I get home Friday and post to this thread to let you know how it works.
I have paired the phone with the car via Bluetooth and transferred contacts fine (although transferring contacts is one at a time) and calls work fine as well.
I tried the Seidio adapter with the M to M 3.5 mm to the Aux jack on the Prius and it worked fine. I also ran the Odyssey nav software while playing MP3's through TCPMP and that worked fine. Only problem was the volume on the nav software was too loud when TCPMP was at the right volume, the volume controls don't work independently.
Didn't especially care for the Odyssey software (running the 14 day trial right now) the one route I mapped gave me a really weird route. I'll try the rest of the weekend and see how it works, but it's also not extremely intuituve from what I've seen so far.
redpoint73 said:
Be aware that not all mini USB accessories work with the Kaiser. Some have the connector pins on the top, some on the bottom. You think that would be universal (thats what the "U" in USB stand for, you know!), but its not. And if you buy an accesory w. the wrong pin layout, it won't work.
I have read this is the case with some headsets, so the adapters may be the same case. Try to buy one that specifically says that it works with the Kaiser (or at least other HTC phones).
Click to expand...
Click to collapse
It's not universal because ExtUSB is a proprietary extension to the USB standard.
Anything involving analog audio is NOT covered by the USB standard.
Does anyone know of a cable to do both charge and output audio to 3.5mm (AUX) using just a single USB connection? Trying to regain the ease of use of the dock connector on my old iPhone.
I found a Motorola cable that appears to be the right thing, but likely wouldn't be compatible with the Nexus 4:
Example: http://www.verizonwireless.com/b2c/...artItem&accessoryId=50288&cartIndexLocation=0
Closeup: http://www.motorola.com/us/consumer...e,en_US,pd.html?cgid=mobile-phone-accessories
Is it possible in any way to play music through the usb-cable? I have a carstereo with usb in. When I connect an iPhone it plays all the system audio through the car stereo. When I connect my S4 it browses the card for music files. It seems like I can play music that is stored on the phone, but I never do that. I play music from Spotify, Google Play Music and other streaming services, so I need an aux cable in addition. Not very elegant.
Is there any way to send the system audio through usb? There is a dock-option in settings, but it doesn't seem to do anything...
+1
I completely misunderstod the question duh!
Nope. Not possible To stream Spotify on USB because songs are Not properly stored on device. Best way is bluetooth or AUX.
Sent from my GT-I9505 using Tapatalk 2
I have an iBolt xProDock in my car, which both charges the phone and sends audio out through the phone's microusb connector. When docked, all audio is routed through the car stereo (you have to tick the checkbox under settings/my device/accessory etc).
The only issue in your case would be that the other end of the xProDock audio cable it has a standard 3.5mm plug instead of USB. If your car has AUX input, you could plug this straight in and get all audio from the phone through your car stereo.
smar said:
I have an iBolt xProDock in my car, which both charges the phone and sends audio out through the phone's microusb connector. When docked, all audio is routed through the car stereo (you have to tick the checkbox under settings/my device/accessory etc).
The only issue in your case would be that the other end of the xProDock audio cable it has a standard 3.5mm plug instead of USB. If your car has AUX input, you could plug this straight in and get all audio from the phone through your car stereo.
Click to expand...
Click to collapse
It does have AUX as well as USB so this would work fine. I don't need the mount though, is it possible to buy just a cable like this anywere? Microusb in one end and usb/aux at the other?
jadajada said:
It does have AUX as well as USB so this would work fine. I don't need the mount though, is it possible to buy just a cable like this anywere? Microusb in one end and usb/aux at the other?
Click to expand...
Click to collapse
Basically the cable has been made to so that when it is plugged in, the phone recognises it as a desktop dock. Thus it is a bit more than just a cable with microusb at one end and usb/aux at the other. (If you are interested in making your own cable, may want to do a search on the resistances between the usb pins that Samsung uses to identify different products plugging into the microusb).
Anyway, I haven't come across anywhere that sells just the iBolt type of cable, but to be fair I haven't really looked/enquired. You could contact iBolt and ask if they'll sell the cable, say as a replacement etc.
EDIT: never mind
I think ibolt do sell the cable separately, check the ibolt thread in the Note2 accessories forum.
Sent from my GT-I9505 using Tapatalk 2
smar said:
Anyway, I haven't come across anywhere that sells just the iBolt type of cable, but to be fair I haven't really looked/enquired. You could contact iBolt and ask if they'll sell the cable, say as a replacement etc.
Click to expand...
Click to collapse
Just came across this http://forum.xda-developers.com/showthread.php?t=2350690 in the S4 Accessories forum. So yes, the cable is available separately.
Since it has a titanium body, it looks like Wireless charging will be missed
Or will it?
It look like it has a charging pad, BUT it looks like it will a magnetic connector will allow Qi-ish like charging where you lay it down without having to connect a usb cable, but the back docking pins will charge the phone. When charged you just pick it up and go without having to disconnect anything, WHICH I FREAKING LOVE ABOUT MY QI wireless charging right now with my Nexus 6.
The back is ceramic, not titanium. So it could work, and does work, but you need to connect with their pins for the phone to recognize the pad. It's wireless but I think without the pins it doesn't work. We will have to wait and see..
Sent from my Pixel using XDA-Developers Legacy app
Since there's no headphone jack, it would be nice if there were a way to charge the phone and have a 3.5 mm jack plugged in to the USB jack at the same time. Especially in the car.
cb474 said:
Since there's no headphone jack, it would be nice if there were a way to charge the phone and have a 3.5 mm jack plugged in to the USB jack at the same time. Especially in the car.
Click to expand...
Click to collapse
Just buy a cheap $15 Bluetooth aux. No more wires in my car, besides the charger if I need it.
You know, The phone supports Wireless USB. How exactly do you suppose they accomplish that? Its already been stated by Andy that the two connection points are magnetic for aligning accessories. Now, I don't think anyone knows for SURE how this phone's tech actually works yet. Since Andy went on record to say this tech will be open source, who is to say this wireless communication couldn't support Qi charging with a software update. It's entirely possible that this phone supports that out of the box. Really I am not confident that this could be answered with a " yes it does" or "no it does not" quite yet. Unless I am uninformed? can anyone else chime in?
EDIT** pins do provide power infact too.
When the phone website first launched there was an accessory for a wireless charging dock that said coming soon..... It's not there anymore. I thought it was supposed to transmit power thru the connector pins. But maybe the pins only transfer power from phone to accessory not accessory to phone.
bsg411 said:
When the phone website first launched there was an accessory for a wireless charging dock that said coming soon..... It's not there anymore.
Click to expand...
Click to collapse
It is still there, when scrolling down the webpage. The image is of the phone lowering to rest in plate charger, to get juice via the two pins on back of phone.
lpasq said:
It is still there, when scrolling down the webpage. The image is of the phone lowering to rest in plate charger, to get juice via the two pins on back of phone.
Click to expand...
Click to collapse
Your right.... It is still there....I overlooked it. Well I'm not really sure why every review says there's no wireless charging. Assuming this dock actually comes out.... It is charging without a cord/wire... Which is essentially wireless charging. It's just not qi wireless charging technology.... It could basically be described as proprietary wireless charging.
cb474 said:
Since there's no headphone jack, it would be nice if there were a way to charge the phone and have a 3.5 mm jack plugged in to the USB jack at the same time. Especially in the car.
Click to expand...
Click to collapse
I was reading an interview and Andy indicated one of the next adapters for the phone after the camera is car audio integration.
I wonder what that is?
My BMW uses USB storage so I don't even bother with the phone.
tech_head said:
I was reading an interview and Andy indicated one of the next adapters for the phone after the camera is car audio integration.
I wonder what that is?
My BMW uses USB storage so I don't even bother with the phone.
Click to expand...
Click to collapse
It will be interesting to see what they do with the adapters. If they do that, I hope it includes a 3.5mm jack. For a lot of people that's still the only way they have to tap into their car audio system.
I am pretty sure the 2 pins are just for power, and any wireless bit is through the 60hz system which is more than likely data only.
So no Wireless charging parse', but with the dock, it has fancy pin charging lol.
I do also look forward to seeing what else they use that expansion ability for. Heck If they wanted to add a headphone port to the phone how easy would it be to just build a slim plate that attached to it that barely is thicker than the port itself, but is a bit wider to include a nice DAC and AMP? Doesn't take up the USB port for charging and could have really good audio to boot. The possibilities are endless and unlike some of the other modular designs, this one seems to make good sense and not be an eyesore when not in use.
Wireless data transfer and wireless charging are not even remotely the same thing. Data transfer is radio waves with a transmitter and receiver. Qi charging is electromagnetic induction (a magnetic field around a coil of wire will induce a voltage in the wire).