Related
So I've managed to find a treasure trove of firmwares for the Chinese model. Particularly interesting is that many early beta versions are available, from before release. Although there really may not be anything useful yet, I should be able to find new updates before they are released. Here is a list of all that's available. If you need any of these files, let me know. Note that anything under 1GB is most likely an OTA, though.
X100-AL10C00B057 (244MB)
X100-AL10C00B058 (280MB)
X100-AL10C00B059SP01 (224MB)
X100-AL10C00B059SP01 (298MB)
NXT-AL10C00B100 (356MB)
NXT-AL10C00B100 (1689MB)
NXT-AL10C00B100SP01 (215MB)
NXT-AL10C00B100SP02 (280MB)
NXT-AL10C00B100SP03 (283MB)
NXT-AL10C00B101 (355MB)
NXT-AL10C00B101SP06 (188MB)
NXT-AL10C00B101SP06 (1727MB)
NXT-AL10C00B101SP02 (106MB)
NXT-AL10C00B101SP02 (1631MB)
NXT-AL10C00B102 (95MB)
NXT-AL10C00B102 (1623MB)
NXT-AL10C00B102SP06 (1729MB)
NXT-AL10C00B105 (226MB)
NXT-AL10C00B106 (138MB)
NXT-AL10C00B106 (1624MB)
NXT-AL10C00B111 (251MB)
NXT-AL10C00B111 (1664MB)
NXT-AL10C00B111 (327MB)
NXT-AL10C00B112 (270MB)
NXT-AL10C00B112 (173MB)
NXT-AL10C00B112 (1643MB)
NXT-AL10C00B116 (73MB)
NXT-AL10C00B116 (1643MB)
NXT-AL10C00B121 (1662MB)
NXT-AL10C00B122 (146MB)
NXT-AL10C00B122 (1673MB)
NXT-AL10C00B122SP02 (1676MB)
NXT-AL10C00B123 (101MB)
NXT-AL10C00B123 (1667MB)
NXT-AL10C00B076SP02 (233MB)
NXT-AL10C00B122SP02 (64MB)
NXT-AL10C00B122SP04 (84MB)
NXT-AL10C00B122SP04 (1691MB)
NXT-AL10C00B128 (198MB)
NXT-AL10C00B128 (257MB)
NXT-AL10C00B129 (72MB)
NXT-AL10C00B122SP05 (96MB)
NXT-AL10C00B129 (257MB)
NXT-AL10C00B122SP06 (80MB)
NXT-AL10C00B122SP06 (1686MB)
NXT-AL10C00B131 (291MB)
NXT-AL10C00B129SP01 (76MB)
NXT-AL10C00B122SP07 (80MB)
NXT-AL10C00B131 (1674MB)
NXT-AL10C00B129SP02 (80MB)
NXT-AL10C00B129SP02 (1674MB)
NXT-AL10C00B122SP08 (73MB)
NXT-AL10C00B132 (123MB)
NXT-AL10C00B132 (307MB)
NXT-AL10C00B137 (73MB)
NXT-AL10C00B137SP02 (74MB)
NXT-AL10C00B137 (215MB)
NXT-AL10C00B137 (1674MB)
NXT-AL10C00B151 (261MB)
NXT-AL10C00B152 (215MB)
NXT-AL10C00B152 (178MB)
NXT-AL10C00B153 (178MB)
NXT-AL10C00B153 (73MB)
NXT-AL10C00B156 (78MB)
NXT-AL10C00B156 (178MB)
NXT-AL10C00B156 (1675MB)
NXT-AL10C00B163 (164MB)
Nice thread, thank you. Where did you get NXT-AL10C00B163 (164MB) ?
Is this the next OTA?
I have the Chinese 128 GB version, living in Italy, and yet didn't get this update.
nope, B163 seemed to be just an internal testing or beta version. current chinese firmware is B165, u should get it sometime in the near future via OTA (provided, of course, ure still all stock, i.e. no root, no unlocked bootloader, no custom recovery, etc.)
Hi, I am a HUAWEI MATE 8 user in China. I’ve seen from the XDA forum that you have the firmware version of Chinese MATE8 modle. Can you send me the file of NXT-AL10C00B116 (1643MB)?
I just received the b165 update. I haven't noticed anything different.
killuminati206 said:
I just received the b165 update. I haven't noticed anything different.
Click to expand...
Click to collapse
Do you know how to do the update when you have root?
ghfatw said:
Do you know how to do the update when you have root?
Click to expand...
Click to collapse
I'm curious about this too. I have ordered the Chinese version and plan on using the tool RayGlobe Italian Knife to switch to international rom, but I understand that if you do this you don't receive OTA so you have to flash each new software version manually. In the OTA thread each OTA file can be found but the problem is that it says that you can not be rooted when flashing it.
Sent from my NX507J using Tapatalk
If you have the right oeminfo, and it corresponds with the update, it will update manually, (hold vol up, vol down, power) dload folder .app file inside.
I see the firmware OTA has been released for A2017G, I'm in the UK and not ever received it, am I going to have to get it from ZTE DE again?
Mike
rolfey83 said:
I see the firmware OTA has been released for A2017G, I'm in the UK and not ever received it, am I going to have to get it from ZTE DE again?
Mike
Click to expand...
Click to collapse
https://forum.xda-developers.com/axon-7/how-to/info-download-link-fota-b04-a2017g-t3605235
Hamburgle4 said:
https://forum.xda-developers.com/axon-7/how-to/info-download-link-fota-b04-a2017g-t3605235
Click to expand...
Click to collapse
May I ask you whether this australian version work without any issue on any A2017G? if that's the case, can I flash it from marshmallow B08 or do I need to go another route? (like M B10 then N B01 then B02 then B04?).
I am in a similar situation where I'm still stuck on Marshmallow B08 updated through OTA last december and I have been waiting for another OTA since then to no avail (didn't receive B10 or B11)...
Also this australian version seems odd to me, as I understood it the A2017G ROM is developped by ZTE germany, why is this firstly available full image particularly dedicated to australia? that's why I wonder whether there is something special about it. Otherwise I'm not sure whether ZTE germany stated they would be releasing the full image for B04 or if it's only through OTA (which I may never get)
Thank you!
ALeX850 said:
May I ask you whether this australian version work without any issue on any A2017G? if that's the case, can I flash it from marshmallow B08 or do I need to go another route? (like M B10 then N B01 then B02 then B04?).
I am in a similar situation where I'm still stuck on Marshmallow B08 updated through OTA last december and I have been waiting for another OTA since then to no avail (didn't receive B10 or B11)...
Also this australian version seems odd to me, as I understood it the A2017G ROM is developped by ZTE germany, why is this firstly available full image particularly dedicated to australia? that's why I wonder whether there is something special about it. Otherwise I'm not sure whether ZTE germany stated they would be releasing the full image for B04 or if it's only through OTA (which I may never get)
Thank you!
Click to expand...
Click to collapse
That link isn't the full package Aus update. It's the German FOTA update to B04.
To my knowledge, Aus version works without issue. The only question mark recently was whether it would work with the A2017G sold in Japan, and it apparently worked perfectly fine.
Official instructions on Aus support page are to upgrade to MM B10 as the bare minimum, so I'd recommend that.
You are struck on B08 because your country's development team has not released anything newer, much like most other country specific A2017G dev teams. That also is why Aus released the full update file, as they're jumping straight from B10. Mind you, the G more likely stands for Global than Germany ?.
And you'll want to refer to this thread instead. https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
Hamburgle4 said:
https://forum.xda-developers.com/axon-7/how-to/info-download-link-fota-b04-a2017g-t3605235
Click to expand...
Click to collapse
I downloaded the update but the phone didn't see it.
Guess I'll have to wait for the official OTA.
Mike
rolfey83 said:
I downloaded the update but the phone didn't see it.
Guess I'll have to wait for the official OTA.
Mike
Click to expand...
Click to collapse
You can force it via recovery. If you decide to wait, lemme know when you one day receive the OTA!
I don't know why I called this post B02, when it's B04 I want. Has anyone one else successfully downloaded and upgraded by putting on the SD card, and if so do you have the link? This is for the UK model by the way, I guess the European is the same all round?
Mike
rolfey83 said:
I don't know why I called this post B02, when it's B04 I want. Has anyone one else successfully downloaded and upgraded by putting on the SD card, and if so do you have the link? This is for the UK model by the way, I guess the European is the same all round?
Mike
Click to expand...
Click to collapse
Yes.
...force the update via recovery. Might need to enable oem unlocking too in developer settings.
Thanks for the confirmation, is the only link we have at the beginning of this thread?
Mike
You can always use the full B04 zip (2GB+) if you aren't able to get the fota update file to work.
That file can be found in the other link I posted in this thread.
Hi all, I'm a US user with W09 and would like to get it to Nougat - I have read the entire "Update to EMUI 5.0" thread and there appeared to be several possible routes, but most were regarding the European version.
I have a US Wi-Fi model and have no allegiance in keeping it a US one, if there's a way to remove the regional aspect to gain access to the update (BETA or otherwise).
I would greatly appreciate if someone who has some experience with or is very confident of the correct path would shed some light for me.
Thank you!
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Sent from my Nexus 6 using Tapatalk
33adi said:
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Click to expand...
Click to collapse
I've just finished reading the entire thread linked above that mentions that method a number of times, so I'm certainly familiar with it, but haven't tried it because sprinkled throughout that thread are plenty of issues encountered. Also, there's no mention of US hardware/firmware specific instructions.
I'm on W09 as mentioned in the OP - thanks for the reply!
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Sent from my Nexus 6 using Tapatalk
33adi said:
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Click to expand...
Click to collapse
I'm away from my tablet at the moment but will do later on when I get home.
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Sent from my Nexus 6 using Tapatalk
33adi said:
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Click to expand...
Click to collapse
Here's what's in firmware finder @33adi
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Sent from my BTV-W09 using Tapatalk
gaidin43 said:
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Click to expand...
Click to collapse
The advantage of removing the US stock rom is that the European one has a beta available that is very stable. My thread is seeking someone who's confident of the steps to 1st going European & 2nd installing nougat once there, as there was some debate of complexity to doing even that.
I've been through exactly what you are wanting to do @dutchdoggs54 . Unfortunately I can't tell you step by step how I got to where I'm at.
I was on W09128BXXX out of the box . Read the topic that you have linked in your first post and decided to do it using firmware finder to force the update to Nougat as they described. It actually went very well and Nougat worked great with the exception of Bluetooth not working.
I have to say during the upgrade when it booted into recovery and it was TWRP I was concerned. Believe it had an error but it worked and replaced TWRP as I recall with a stock recovery.
So after all that I decided I wanted my tablet branded as a BTV-W09C100B006. Below is the topic where a member thought they bricked their tablet.
https://forum.xda-developers.com/mediapad-m3/how-to/bricked-m3-btv-w09-t3612699
They were given directions to download the Full update package for the version I just mentioned.
This member got their tablet working again and in the process found that 5Ghz wifi is enabled on C100B006 by default.
That was the main reason I rooted my tablet.
I followed the directions knowing I force install a different version of Nougat from your link.
Downloaded the full version software and dropped it in the dload folder on my US tablet and did the upgrade.
Tablet rebooted and shortly after it rebooted again going to recovery (I tried may times to boot). Don't recall the error but after I unlocked my bootloader again it reset the tablet and I was able to access it again. I did relock the bootloader so I can see updates without any problems after that.
In the end I got what I was after. My tablet shows as a BTV-W09C100B006 and can check for updates.
5Ghz wifi is enabled by default. As I said I relocked the bootloader so I'm not rooted. Overall it's works so well I'll wait for Nougat to get released and then do the official upgrade. After the scare of booting to recovery it was worth every nervous minute of it.
Try to talk to OP from this thread:
https://forum.xda-developers.com/p9/...-root-t3374068
Maybe he can make this app available to Mediapad M3, then changing OEMINFO will be easy.
I posted a question there.
No luck
Ok, so I tried following @Samavb's great instructions and guidance in the other thread last night. Made it all the way to the point where he says to install 009 from the Huawei website - got it downloaded and loaded up on the tablet only to find that it wouldn't install because the 009 file on the website is BTV-DL09 not the BTV-W09 version a US tablet would need.
So I got frustrated and tried installing the B301 build that appeared on firmware finder when I was on the W09-006 build...this was nougat and was cool but no keyboard and the play store wouldn't install anything, so I was forced to revert back to 006.
So, long story short, hours of work have confirmed that there doesn't appear to be a way to get a US tablet to fully functional Nougat at the moment. If there was a 009 or 010 build like Samavb mentions for the US model, maybe it would work, but those aren't anywhere to be found - firmware finder, russian site he mentions or otherwise.
So, I'll happily sit on 006 and wait for a US OTA update. That is unless anyone can tell me exactly how to make this US model into a European model.
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
dr_pepper said:
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
Click to expand...
Click to collapse
In Firmware Finder select the menu in the top left corner. (3 bars)
Right below your model number, select change model and enter BTV-W09C100 and then search.
You should see B301 and it's a full OTA. However, as I understand it this is just a beta/test release.
Only issue I had with it, bluetooth didn't work. Seeing as how I don't use it, didn't bother me.
I highly recommend you fall back to the other topic about forcing the upgrade to Nougat.
Only difference from my tablet and yours. I was on C128B002. I had already rooted and couldn't get that update.
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
johninsf said:
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
Click to expand...
Click to collapse
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
purple lady said:
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
Click to expand...
Click to collapse
Excellent and great news! Are you in the US and have the wifi only version?
johninsf said:
Excellent and great news! Are you in the US and have the wifi only version?
Click to expand...
Click to collapse
Yep.
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
johninsf said:
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
Click to expand...
Click to collapse
from what i gather. if you're going from MM to Nougat, you need to install the Full OTA. for that, there are 2 files, you will need both of them. from there, i'm not sure.
My F5321 from Malaysia isn't receiving any of the new updates. Last one was 34.4.A.2.32.
Could anyone explain why?
You can check xpericheck.com if there's a newer version,but there's a good chance there isn't one. I'm stuck on 34.4.A.2.50 on the Central Europe version for example, the newest one is .85
Matej101 said:
You can check xpericheck.com if there's a newer version,but there's a good chance there isn't one. I'm stuck on 34.4.A.2.50 on the Central Europe version for example, the newest one is .85
Click to expand...
Click to collapse
Customised MY isn't even listed. :/
What now? Unlocking bootloader if you want latest security patches?
Is there another firmware variant that would be suitable for your location? There may be less difference between the variants than you might expect.
pseudonym58 said:
Is there another firmware variant that would be suitable for your location? There may be less difference between the variants than you might expect.
Click to expand...
Click to collapse
Can you just flash the firmware straight from xperifirm, or do you need an unlocked bootloader or sth?
Bro do not update it to 8.0 oreo is wery bad I swear im back to stock Nougat again
Qendra said:
Bro do not update it to 8.0 oreo is wery bad I swear im back to stock Nougat again
Click to expand...
Click to collapse
true
Matej101 said:
You can check xpericheck.com if there's a newer version,but there's a good chance there isn't one. I'm stuck on 34.4.A.2.50 on the Central Europe version for example, the newest one is .85
Click to expand...
Click to collapse
me too.. central europe and stuck on 34.4.A.2.50, I don't understand why
andy356 said:
My F5321 from Malaysia isn't receiving any of the new updates. Last one was 34.4.A.2.32.
Could anyone explain why?
Click to expand...
Click to collapse
According to xpericheck, singapore region firmware is also stuck in March. I guess both MY and SG are using the sme FW. I think you cn flsh other region FW without unlocking Bootloader.
Is there a way to flash security updates only, without upgrading to oreo?
trewelu said:
According to xpericheck, singapore region firmware is also stuck in March. I guess both MY and SG are using the sme FW. I think you cn flsh other region FW without unlocking Bootloader.
Click to expand...
Click to collapse
Can anyone please confirm this? I'll unlock the bootloader if I have to, but it would be great if it is not needed.
andy356 said:
Can anyone please confirm this? I'll unlock the bootloader if I have to, but it would be great if it is not needed.
Click to expand...
Click to collapse
I'm in USA, and I've flashed f'd from at least 10 different countries and never seen any affect on the phone operation.
andy356 said:
Can anyone please confirm this? I'll unlock the bootloader if I have to, but it would be great if it is not needed.
Click to expand...
Click to collapse
If you want to retain the fingerprint sensor operation, don't flash to US. People here have in the past recommended either DE or UK, as they tend to be updated promptly. No unlocking of bootloader needed.
Okay guys. I'm ready to flash a new firmware, probably Customised UK. Is the guide on xperiablog up to date and accurate? Also, there is a flashtool by Androxyde on flashtool dot net, but there is also a flashtool on Sony Developer World. Which one should I use?
There is only one xperifirm so that's unambiguous, at least.
Edit: also, it doesn't affect user data or the OS in general, does it?
I can only speak from personal experience with the Androxyde flashtool. I've never tried (nor even known about) the Sony flash tool. In my experience, if you don't make any changes to the default settings, the existing user data is carried over into the newly installed firmware. I'm assuming here that you're flashing from one variant of Android 8.0 to another, not from Android 7 to 8, etc.
BTW, I would always advise backing up your data first, of course. If, for some reason, you are dissatisfied with the result, you can normally get a factory installation of your currently-installed firmware by using software restore from SONY (as part of Xperia Companion).
@pseudonym58 Thanks. Is the guide on Xperia blog the one to follow or is there a better one out there?
I don't recall which guide I used. It basically runs like this:
Run Xperiafirm from within flashtool; it will refresh available software. Choose particular phone model and download desired firmware. Back in flashtool proper, connect phone in flash mode. Select downloaded firmware, which is unpacked and prepared for flashing. As I mentioned above, you should not need to make any configuration changes to the default. Flashing can now begin (it might seem to pause temporarily from time to time but don't cancel process).
Don't worry about warnings of missing elements; I have never had a flashing procedure fail as a result of a claimed missing component.
This is just a general procedure; perhaps someone else can recommend the best full tutorial.
Ok so CE1 got the newest (.107) update right now so it can probably be used too.
Hi!
Does anyone know where I can find the T387AAUCS3CUD1 stock ROM? I'm trying to fix a unit that I may have messed up by tinkering with custom ROMs.
Anyone?
Still nothing?
Hi also searching high and low for T387AAUCS3CUD1.
Any success finding it?
Samsung Galaxy Tab A (T387AA) - Software Update for the Samsung Galaxy Tab A (T387AA) - AT&T
Get Samsung Galaxy Tab A (T387AA) support for the topic: Software Update for the Samsung Galaxy Tab A (T387AA). Find more step-by-step device tutorials on att.com.
www.att.com
ATT is worthless - no support. OTA Android 8 won't update to Android 10. Says already current.
No luck yet :-(
Still no luck.
Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.
Would this not though prevent a user from being able to use it on AT&T?
scythe000 said:
Would this not though prevent a user from being able to use it on AT&T?
Click to expand...
Click to collapse
I popped in an ATT sim and calls/txt appear to be working.
Oh interesting, I wonder what the difference between the two firmware versions are then?
javadahut said:
Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.
Click to expand...
Click to collapse
Got a link to where we can download it?
scythe000 said:
Got a link to where we can download it?
Click to expand...
Click to collapse
I used Bifrost. It can pull the latest firmware for most samsung devices that are hosted on samsung servers. Type in the model, "SM-T387W" and the CSC, "VTR", check for update and then download.
Bifrost link: https://github.com/zacharee/SamloaderKotlin