Hello,
I have problem with my SGS I9000. When I am trying to turn on my phone, I can see only SAMSUNG boot screen blinking again and again. I am NOT able to run recovery mode or download mode (it's strange for me). And what is strange, when phone is turned off and I will plug in battery charger, there is only "spinning" circle.
I know there are threads regarding this problem but other users were able to run download mode, but I am NOT :-(
Thanks to everyone for any answers.
skipper_nb said:
Hello,
I have problem with my SGS I9000. When I am trying to turn on my phone, I can see only SAMSUNG boot screen blinking again and again. I am NOT able to run recovery mode or download mode (it's strange for me). And what is strange, when phone is turned off and I will plug in battery charger, there is only "spinning" circle.
I know there are threads regarding this problem but other users were able to run download mode, but I am NOT :-(
Thanks to everyone for any answers.
Click to expand...
Click to collapse
Have you been able to get into download mode previously? If not it's probably not enabled.
The best approach is probably to make/buy a USB jig. Check ebay.
I was able to run download mode before. Yes, thank you, I already found out how to create jig and I made it.
So pls close this post and sorry.
hello all, i am sorry for bothering you.
i have an samsung s4 i9506 and i have installed latest custom rom " CM13.0 " And after 3 days i left it at the pc charging. and when i went back to get it i cant see nothing, no light, no screen, nothing.
i removed the battery and tried to power up but no luck changed the battery but no luck. i cant get in download mode, recovery mode. when i plug usb i can see only this " qhsusb-bulk " and windows is searching for drivers, i found the drivers, but i cant find nothing how to fix it. i saw some threads that requires riff box or z3x box, but i dont have one of them. i tried Usb Jib but no luck, so what do you think? Any help is appreciated. Thank you.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
Hey guys. I tried rooting my LG G4c but after rebootingen it seems that my phone is stuck in a loop, and i can't fix it.
What happens when i turn the phone on:
1. LG logo turn up
2. The following message appears:
[670] --------------------------------------
[670]
[670] Boot verification fail!!
[670] - cause : MISMATCH_SIG_LEN
[670]
[670] --------------------------------------
3. Phone reboots
Using the power button + volume down does NOT work anymore to start recovery mode (although starting the IMEI display still works).
I tried using LG UP to install the original firmware via USB but the device does not show up in the list (probably because the phone keeps rebooting itself). Some website also said to connect the phone with the pc, turn LG UP on, then put out the battery and put it back in to make it work, but that also didn't work.
Anyone know what i can try next? What method can i use to reinstall the firmware? And if it's not possible, does it cost much to repair and who should i ask?
Edit: It seems i can start "Factory data reset" but when this proces starts the phone restarts and continues the loop with the error message.
I also tried connecting the device with LG UP while the phone is stalled on the IMEI screen and the Factory data reset screen. This way the phone does note restart itself and it might appear in the device list of LG UP. But too bad it still didn't work.
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
I had this problem too. I send it to LG and said the phone was unplugged during update process. They flashed it and I gave it to my mom. I have an S4 yet. Much better performance and rom support.
download mode
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
Can you get it into download mode?
Help. I flashed a rom for Oneplus One on my Zuk Z1(I know it's stupid). It even was a success but when I rebooted my system it just went all black. Now nothing is happening with any button combination. I tried QFIL but my device is not recognized by my PC. If anyone has any solutions then please post it. In an urgent need.
Looks like you didn't delete modem and firmware files for detection with qfil connect your phone with volume down button pressed
Thanks bro. I solved it as you told