/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Aex 6.0 For Redmi 5 {Rosy}
Credits
@Egaiswadi For FP fix
What works -
WiFi
Headphone
Fingerprint
Camera (Both Back and Front)
Volte
Notification Led
Speaker
BUGS-
Hotspot
Ir blaster
Fingerprint is not fast (But its working)
How to Install
ALL LINKS ARE GIVEN BELOW
Unzip aex6.0.img.xy using zarchiver
Flash treble recovery.
Wipe - Dalvik/Art cache,System,data,cache,vendor
Flash Treble enabler
Flash Gsi
!!THEN REBOOT THE PHONE!!
Then again go to twrp
Flash gapps
Flash fingerprint fix
Flash volte fix
Then reboot and BOOM! you are on pie!
LINKS -
Treble enabler -
https://drive.google.com/file/d/1O2VgN7hU4m5SYPjkt9LQ6SKQhzWja81d/view?usp=drivesdk
Gsi -
https://androidfilehost.com/?fid=1322778262904007114
Gapps -
https://opengapps.org
Fingerprint Fix -
https://drive.google.com/file/d/1T6Ps0Id6Yt7sOTtFKx4dXDEGIxC2_tpF/view?usp=drivesdk
Volte Fix -
https://drive.google.com/file/d/1RZwk4cIgnFVQR83eZ9sLbGioweRTC6mZ/view?usp=drivesdk
Thanks for reading! Enjoy Pie
Volte fix link
volte fix llink is not correct, please update it. It is opening an ims.apk link. No zip link
parimalingle1805 said:
volte fix llink is not correct, please update it. It is opening an ims.apk link. No zip link
Click to expand...
Click to collapse
Ims app is volte fix bro.. install it
Done
AP hacker said:
Ims app is volte fix bro.. install it
Click to expand...
Click to collapse
Thanks bro. Its installed and working perfectly.
Actually it was showing installation error at first, so I downloaded it again.
parimalingle1805 said:
volte fix llink is not correct, please update it. It is opening an ims.apk link. No zip link
Click to expand...
Click to collapse
Confirmed. It is linked to ims.apk.
Could you please update?
Fingerprint slow but working. Good ROM. Can be improved but it is a very good start. I will continue to test.
It is working fine. The FP is not really that slow. Is thunderstorm kernel compatible with this ROM?
finalmoksha said:
It is working fine. The FP is not really that slow. Is thunderstorm kernel compatible with this ROM?
Click to expand...
Click to collapse
Yas it is
Yes
finalmoksha said:
It is working fine. The FP is not really that slow. Is thunderstorm kernel compatible with this ROM?
Click to expand...
Click to collapse
Yes sir. It's compatible
Nice
parimalingle1805 said:
Thanks bro. Its installed and working perfectly.
Actually it was showing installation error at first, so I downloaded it again.
Click to expand...
Click to collapse
Glad to hear that it's working
Thanks!
drnoellyg said:
Fingerprint slow but working. Good ROM. Can be improved but it is a very good start. I will continue to test.
Click to expand...
Click to collapse
Thanks for Ur review sir.
AP hacker said:
Yes sir. It's compatible
Click to expand...
Click to collapse
Much more smooth with the thunderstorm kernel. I can now use this as my daily driver. Will post battery stats and other parameters after I use it for a bit. Thanks for your work. Appreciated
Thanks!
finalmoksha said:
Much more smooth with the thunderstorm kernel. I can now use this as my daily driver. Will post battery stats and other parameters after I use it for a bit. Thanks for your work. Appreciated
Click to expand...
Click to collapse
Battery iS Absolutely great! Battery lasts more than 1 day on normal usage.
Which recovery should I flash? Link please
dj88 said:
Which recovery should I flash? Link please
Click to expand...
Click to collapse
Please read the full thread then ask questions. I have said that u will require treble recovery.
AP hacker said:
Please read the full thread then ask questions. I have said that u will require treble recovery.
Click to expand...
Click to collapse
Ya I know that but when I try treble enable recovery there is no option to wipe vendor partition that's why I am asking.
No
dj88 said:
Ya I know that but when I try treble enable recovery there is no option to wipe vendor partition that's why I am asking.
Click to expand...
Click to collapse
If there is no option to wipe vendor then it cannot be called treble recovery.... don't worry just go ahead wipe everything that u can wipe... Then flash treble enabler.zip then gsi and then reboot then flash gapps then flash Fingerprint fix then install ims apk
AP hacker said:
If there is no option to wipe vendor then it cannot be called treble recovery.... don't worry just go ahead wipe everything that u can wipe... Then flash treble enabler.zip then gsi and then reboot then flash gapps then flash Fingerprint fix then install ims apk
Click to expand...
Click to collapse
Now what should I do. While flashing gsi what should I chose vendor or system I tried both but result is not able to upload erroe images right now. but error code 20
AP hacker said:
Battery iS Absolutely great! Battery lasts more than 1 day on normal usage.
Click to expand...
Click to collapse
Yeah, I agree. Couldn't expect more.
dj88 said:
Ya I know that but when I try treble enable recovery there is no option to wipe vendor partition that's why I am asking.
Click to expand...
Click to collapse
Flash the batik recovery
https://forum.xda-developers.com/redmi-5/development/official-batik-recovery-t3838833
Related
THE ANDROID O
Code:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I DON'T HAVE THIS PHONE !
THIS ROM IS NOT TESTED BY ME OR ANYONE YET
SO, THIS IS STRICTLY AN ALPHA BUILD
WAIT FOR SOMEONE TO TEST THIS ROMFEATURES
-Based on 8.0.0 developer preview "bullhead-opp4.170623.014-factory-e37b9eae.zip"
-Rooted
- Busybox
- su.d support
- Debloated
- init.d support
- boot.img (insecured)
- dm-verity (disabled)
- forceencrypt (disabled)
Still not debloated & zipalignedINSTALLATION
- Copy zip to your sdcard
- Go to recovery TWRP
- Make a full Wipe & cache
- Install the Bullhead_X.zip
- Install OpenGapps
- Wipe dalvik cache
- Reboot
DOWNLOADS
LINK : MODERATOR EDITED - DOWNLOAD LINK REMOVED!NOTE : ONCE AGAIN , THIS IS STRICTLY AN ALPHA BUILD & UNTESTED ROM
XDA:DevDB Information
Bullhead X, ROM for the LG Nexus 5X
Contributors
princevirus, SuperR.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 7.0 or Above
Version Information
Status: Testing
Created 2017-08-04
Last Updated 2017-08-09
Anyone test the ROM?!
Luca Toni said:
Anyone test the ROM?!
Click to expand...
Click to collapse
Nope, i don't think so . . . .
Eagerly waiting for someone to test . . . .
I did, stuck at google logo
herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
You make a full wipe or just data and dalvik?!
herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
How much time it takes ??
Have you used latest TWRP ?
OKAY So, I am going to solve the problem until then Try clean installation once again , Luck by chance if it works :good:
I make clean install ,wipe system data dalvik and stuck in google logo for 10 min and more .
herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
Luca Toni said:
I make clean install ,wipe system data dalvik and stuck in google logo for 10 min and more .
Click to expand...
Click to collapse
Here is the new zip https://drive.google.com/open?id=0B2mLc8rLgcfrWU45cnhuVXlTUGs
Inshallah this will work !
What is the meaning of this rom?
No,it's not working,stuck in google again
princevirus said:
Here is the new zip https://drive.google.com/open?id=0B2mLc8rLgcfrWU45cnhuVXlTUGs
Inshallah this will work !
Click to expand...
Click to collapse
Can you please add features pixl for the rom
@monzer: means, you could boot?
Sigray said:
What is the meaning of this rom?
Click to expand...
Click to collapse
This rom is based on Android version 8 Final developer preview !!!
monzer said:
Can you please add features pixl for the rom
Click to expand...
Click to collapse
Did it work for you ????
Luca Toni said:
No,it's not working,stuck in google again
Click to expand...
Click to collapse
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !
princevirus said:
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !
Click to expand...
Click to collapse
Someone must catch the log from boot and see whats the problem.
Luca Toni said:
Someone must catch the log from boot and see whats the problem.
Click to expand...
Click to collapse
Yeah thats the only option, but who will do it ?
princevirus said:
Yeah thats the only option, but who will do it ?
Click to expand...
Click to collapse
I don't have time sorry
princevirus said:
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !
Click to expand...
Click to collapse
Seems like your system image was built not properly. Best way to make system images for stock-based ROMs is making system on device and getting system.img with dd. But you don't have Nexus 5X :/
argraur said:
Seems like your system image was built not properly. Best way to make system images for stock-based ROMs is making system on device and getting system.img with dd. But you don't have Nexus 5X :/
Click to expand...
Click to collapse
When i am building it with assayyed kitchen it was showing me
Code:
file_contexts not found, your rom contains bug or it will not boot properly
So, i think this is why it is not booting !
When i am working on its developer preview 3, i have noticed that "build.prop" file was not there and the information was not showing in the kitchen
but in DP4 everything is there except "file_contexts"
Okay so I've been trying some treble gsi's and yesterday I installed the AICP image on my phone. I've had zero issues, magisk works, substratum works, the style option in settings works, magisk modules work, the rom is really smooth and has a lot of settings and the battery life is pretty good too :^]
Download link: https://drive.google.com/drive/folders/1LtPNR6R4dxJslXFIjpF9FhyfEfhBTCOa
List of available treble images: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Gapps: https://opengapps.org
Latest magisk: https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view
Install process is the same as with any other treble rom.
Happy flashing!
edit: typos
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
crayonicle said:
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
Click to expand...
Click to collapse
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
jetzecazemier said:
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
Click to expand...
Click to collapse
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
crayonicle said:
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
Click to expand...
Click to collapse
Most welcome!
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
jetzecazemier said:
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
Click to expand...
Click to collapse
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
See above
Wh1t3Rose said:
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
See above
Click to expand...
Click to collapse
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Possible to have a antutu screenshot?
jetzecazemier said:
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Click to expand...
Click to collapse
Sounds like root isn't install correctly? Did you check with Root Checker from play store? Which terminal program did you use? You ran su and granted root access first right?
I can't get this ROM to flash. tried both with fastboot tools and flashing the img in TWRP. I just get the Generic "Serious problems have occurred..." message
Edit: NVM I am a moron. Was flashing the AB image. :facepalm:
Bugs spotted
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
crayonicle said:
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
Click to expand...
Click to collapse
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Wh1t3Rose said:
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Click to expand...
Click to collapse
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
crayonicle said:
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
Click to expand...
Click to collapse
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Wh1t3Rose said:
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Click to expand...
Click to collapse
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
Yes. I'll try flashing again
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Wh1t3Rose said:
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Click to expand...
Click to collapse
Yes, that's right, I'm using Pico GApps 8.1 ARM64, try clearing cache of download manager, downloads, google play services, and google play store?
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
This thread is closed due to violation of protocol
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.
cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???
Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled
vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble
Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!
I get an error error7 when installing incall2.zip. Do everyone alike?
EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor
Noverity zip link?
guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w
how to remove this notice?
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed
guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
DON'T REPORT ANY BUG AS THIS PROJECT IS STILL WORKING IN PROCESS!
What's working:
Boots
RIL (Calls, SMS, Data)
WiFi
Bluetooth
Camera
Camcorder
Audio
Video Playback
Sensors
Flashlight
GPS
Notification Slider
Off screen gestures
Known issues:
You tell me
Downloads:
https://drive.google.com/drive/folders/0B36BEwJrvdFMMFJlZ25MdEVMazg?usp=sharing
Flash guide:
https://forum.xda-developers.com/showpost.php?p=77332311&postcount=26
Addons:
GApps: https://opengapps.org/
Face unlock: https://forum.xda-developers.com/showpost.php?p=77434144&postcount=197
Screenshots:
Great! downloading now!
YumeMichi, tnx for the opportunity to see how android pie looks and works first time on a onyx phone.
Now i'm install it , than reporting later
Highly appreciate your support! But will try the next build instead of this one, I really need the USB MTP and Notification Slider to work.
Thanks @YumeMichi ....downloading now
Yeah!!!!
I wonder can't we just install all gapps included in 8.1 and then make them system apps using magisk
This is fantastic! Thank you very much! Waiting for new builds now
Anyone with GAPPS flashing success? Which gapps ?
https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Is this working?
thandiBear said:
I wonder can't we just install all gapps included in 8.1 and then make them system apps using magisk
Click to expand...
Click to collapse
Nope. You can't install gapps included in Android 8.1
Edit: API Level changes due to which the gapps from 8.1 won't work.
---------- Post added at 07:39 AM ---------- Previous post was at 07:37 AM ----------
SjBathavar said:
Anyone with GAPPS flashing success? Which gapps ?
https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Is this working?
Click to expand...
Click to collapse
You'll never know till you try. Take a TWRP backup and try flashing them, if they didn't work then restore your backup.
omkolte17 said:
Nope. You can't install gapps included in Android 8.1
Edit: API Level changes due to which the gapps from 8.1 won't work.
---------- Post added at 07:39 AM ---------- Previous post was at 07:37 AM ----------
You'll never know till you try. Take a TWRP backup and try flashing them, if they didn't work then restore your backup.
Click to expand...
Click to collapse
I will definitely try, but not now. So until I am not going to try and if someone already tried can share his views and ideas, that's the meaning of the XDA community.:victory:
such a great effort @YumeMichi thanks a lot for ur hard work, really appreciate to run Android Pie on our Onyx <3
SjBathavar said:
Anyone with GAPPS flashing success? Which gapps ?
https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Is this working?
Click to expand...
Click to collapse
tested with pico version and at first sight works ok
SjBathavar said:
Anyone with GAPPS flashing success? Which gapps ?
https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Is this working?
Click to expand...
Click to collapse
Yes, i installed pico package and Google Play is working now
Thanks for quick [email protected] and @andrew
omkolte17 said:
Highly appreciate your support! But will try the next build instead of this one, I really need the USB MTP and Notification Slider to work.
Click to expand...
Click to collapse
notification slider is working. you can use usb mass storage enabler apk .
psychem said:
notification slider is working. you can use usb mass storage enabler apk .
Click to expand...
Click to collapse
Ok, but currently I won't be trying anything for atleast a few days.
AndrewBotalov said:
Yes, i installed pico package and Google Play is working now
Click to expand...
Click to collapse
Can you able to complete the pixel setup process? . I have tried nano version and its keep on crashing
Ranjith_26 said:
Can you able to complete the pixel setup process? . I have tried nano version and its keep on crashing
Click to expand...
Click to collapse
I forget to say, that i installed gapps after first system boot.
Ranjith_26 said:
Can you able to complete the pixel setup process? . I have tried nano version and its keep on crashing
Click to expand...
Click to collapse
you can delete setup wizard in the CORE folder of opengapps zip also
Official Resurrection Remix ROM by Daniel Mokarov
Rom link:
https://get.resurrectionremix.com/?dir=kuntao
Contributors:
Daniel Mokarov, mikeioannina, Astridxx
Simple guide for new comers to RR
Guide :
(As frequently we can seen users are confused which twrp to use)
1) Flash TWRP 3.2.3 (https://androidfilehost.com/?fid=1395089523397888315)
2) In recovery, Format data - yes (It will format data in ext4)
3) Reboot again to recovery and convert data to f2fs. (Yes, magisk is working without any problem)
4) Wipe system, dalvik, cache, data, internal.
5) Flash RR and Gapps (open-gapps nano is recommended)
6) Reboot (While rebooting the phone will get encrypted on its own)
7) Reboot again to recovery and flash magisk (optional)
Those with the fastboot problemcan try this:
1. Flash Rom
2. Flash Gapps
3. Flash Magisk Root (MOST IMPORTANT)
4. Power on the phone.
Note :
* For FP gestures to work, Enable its option, which is moved to resurrection tools - Buttons - additional buttons - fingerprint gesture. ( no need to flash zip ) for RR.
Click to expand...
Click to collapse
Changelog:
Refer to text file associated with rom file in the rom directory for detailed changelog.
Click to expand...
Click to collapse
Yeah I also found it listed in official website of Resurrection Remix OS
tanzeel.ahmed1306 said:
Yeah I also found it listed in official website of Resurrection Remix OS
Click to expand...
Click to collapse
Do that version also have advanced settings n all.
Abhi8232 said:
Do that version also have advanced settings n all.
Click to expand...
Click to collapse
I didn't flash it yet. I will let you know what's working n all
Flashed the ROM a while back
Here are the first impressions:
It's smooth . Boot time is quick
What works :
WiFi, Bluetooth,NFC,cast,smart pixels,fast charging
The sound output from the speaker is fine
One thing I noticed is when you check changelog in settings nothing appears .
This isn't a major issue.
Lock screen media art is missing . It doesn't work even if it's enabled .
Gcam is working fine . I don't know about the video recording bug because I flashed the pie video fix in recovery .
Need to test the battery life but it looks promising
Thanks for your info, SELinux status?
tanzeel.ahmed1306 said:
Flashed the ROM a while back
Here are the first impressions:
It's smooth . Boot time is quick
What works :
WiFi, Bluetooth,NFC,cast,smart pixels,fast charging
The sound output from the speaker is fine
One thing I noticed is when you check changelog in settings nothing appears .
This isn't a major issue.
Lock screen media art is missing . It doesn't work even if it's enabled .
Gcam is working fine . I don't know about the video
recording bug because I flashed the pie video fix in recovery .
Need to test the battery life but it looks promising
Click to expand...
Click to collapse
Media art is showing on lockscreen.
Video recording also working without any fix.
eugineprakash said:
Thanks for your info, SELinux status?
Click to expand...
Click to collapse
Selinux is enforcing
P2 is having its golden days!
Is there disable fullscreen keyboard option in RR settings?
I have found this weird bug
Battery percentage isn't changing
I charged till 70%
And it's been on the same percentage for about 1/2 hr and I was using the phone all the time .
When I click on battery usage it shows not available .
I tried using apps like accubattery to determine drop on percentage but even that was not able to determine
tanzeel.ahmed1306 said:
I have found this weird bug
Battery percentage isn't changing
I charged till 70%
And it's been on the same percentage for about 1/2 hr and I was using the phone all the time .
When I click on battery usage it shows not available .
I tried using apps like accubattery to determine drop on percentage but even that was not able to determine
Click to expand...
Click to collapse
You are using the one provided on rr website right! Because no such issue on the build i gave link for.
Both are same official build on rr website and googledrive rom
Can u test cast screen ??
Abhi8232 said:
You are using the one provided on rr website right! Because no such issue on the build i gave link for.
Click to expand...
Click to collapse
Few questions :-
F2fs data partition.
Banking apps when no magisk installed.
shailuk301 said:
Few questions :-
F2fs data partition.
Banking apps when no magisk installed.
Click to expand...
Click to collapse
banking apps are working good without root.
Which build ???
eugineprakash said:
banking apps are working good without root.
Click to expand...
Click to collapse
Drive one or from rr website.
About f2fs, any idea.
shailuk301 said:
Drive one or from rr website.
About f2fs, any idea.
Click to expand...
Click to collapse
f2fs works good
all test done
F2FS ok
CAST (wfd) ok
VILTE ok
VoLTE ok
custom kernel (kcal and the other stuff) ok
No BUGS at alll
it is the only complete rom in p2 development section
nice info, the build shared here says RR-P-v7.0.0-20190226 and the one at RR official website says RR-P-v7.0.0-20190227-kuntao.
just wondering if any difference like old and new.
what custom kernel is recommended because i use kcal all the time to tweak the display color to my taste.
shailuk301 said:
Drive one or from rr website.
About f2fs, any idea.
Click to expand...
Click to collapse
RR website
degrus said:
all test done
F2FS ok
CAST (wfd) ok
VILTE ok
VoLTE ok
custom kernel (kcal and the other stuff) ok
No BUGS at alll
it is the only complete rom in p2 development section
Click to expand...
Click to collapse
Okay kanger dani
and you didn't do anything to complete them.