Please help ! I am beginner
i bought sm-n900l and found that it converted to sm-n9005
i have replaced the lcd
but the phone keep boot looping in samsung logo
i tried to flash many stock roms but still boot looping
i flash lineageos 8.1 it is working very fine
but i want to return to stock rom , any version
always face reboot after the blue line flash in my sm-n900l
what would be the problem ?
How can i return to stock ?
Boot to download mode and post the model.
voooker said:
Please help ! I am beginner
i bought sm-n900l and found that it converted to sm-n9005
i have replaced the lcd
but the phone keep boot looping in samsung logo
i tried to flash many stock roms but still boot looping
i flash lineageos 8.1 it is working very fine
but i want to return to stock rom , any version
always face reboot after the blue line flash in my sm-n900l
what would be the problem ?
How can i return to stock ?
Click to expand...
Click to collapse
Flash the stock firmware for your variant "N900L" then right after, boot to Recovery and apply "Data/Factory reset" then reboot to system.
zlazaar said:
Flash the stock firmware for your variant "N900L" then right after, boot to Recovery and apply "Data/Factory reset" then reboot to system.
Click to expand...
Click to collapse
I have done like what you said , but it stuck in Samsung note 3 logo and showing in top recovery boot.
I downloaded a recovery from the rom file
Now i can boot in recovery and perform factory reset ..
But still boot loop .
Posts make no sense .
<i bought sm-n900l and found that it converted to sm-n9005
Does that mean you flashed N9005 firmware and potentially bricked your phone ??
<I downloaded a recovery from the rom file
Very very confused as to what you mean by recovery from rom file and how you flashed it .
I would flash TWRP recovery through Odin and boot to recovery .
Then format data cache system .
Then boot to download mode and flash stock rom .
Its possible with all the multiple rom flashing you have the wrong bootloader .
JJEgan said:
Posts make no sense .
<i bought sm-n900l and found that it converted to sm-n9005
Does that mean you flashed N9005 firmware and potentially bricked your phone ??
No, i flashed different N900L firmwares .
<I downloaded a recovery from the rom file
Very very confused as to what you mean by recovery from rom file and how you flashed it .
I have extracted the rom , and converted recovery.img to tar .
I would flash TWRP recovery through Odin and boot to recovery .
Then format data cache system .
Then boot to download mode and flash stock rom .
Its possible with all the multiple rom flashing you have the wrong bootloader .
Click to expand...
Click to collapse
Even that method i have tried, flash TWRP
and format all data ..then flash stock rom.
What is puzzling me that i can only flash LineagOs 8.1 without any problems..
My guess is that its the bootloader .
JJEgan said:
My guess is that its the bootloader .
Click to expand...
Click to collapse
Good, so what shall I do ?
Tell us your bootloader.
Use Phone Info app.
JJEgan said:
Tell us your bootloader.
Use Phone Info app.
Click to expand...
Click to collapse
THIS IS THE INFORMATION BEFORE FORMAT AND FLASH LINEAGEOS 15
Hardware : Qualcomm
Model : SM-N9005
Build number : LRX21V.N9005XXUGBPF5
Build date UTC : 20160618-085807
Android v : 5.0
Baseband v: N900LKLU0GPB1
Kernel v : 3.4.0-7575111 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Fri Mar 25 19:53:26 KST 2016
THIS AFTER FLASHING LINEAGEOS
Hardware : Qualcomm
Model : SM-N900L
Build number : lineage_hltekor-userdebug 8.1.0 OPM2.171019.029 980cd0e641 test-keys
Build date UTC : 20180506-224643
Android v : 8.1.0
Baseband v: N900LKLU0GOB6
Kernel v : 3.4.113-lineageos-ga652f0b0f413 ([email protected]) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP Sun May 6 17:00:12 MDT 2018
AND FOR THE BOOTLOODER
N900LKLU0GOC4
The before has no bootloader listed.
JJEgan said:
The before has no bootloader listed.
Click to expand...
Click to collapse
same
N900LKLU0GOC4
Related
I hav tried rooting s4
:crying:
model : gt - i9500
android : 4.3
Baseband : i9500DDUEMJ9
Kernel : 3.4.5-1984169
[email protected] #1
fri oct 25 20:40:58 KST 2013
Build : JSS15J.I9500XXUEMJ9
SELinux Status : Enforcing
SEPF_GT-I9500_4.3_0011
the files i tried were cofface cwm and cf-auto root
when i use cf-auto root the phone gets rooted but has stock recovery and nothing can be installed or updated or even cache wiped .... when i press cache wipe it says wiping then shows exclamation mark image and reboots..
when i use cofface cwm and then install supersu it says i hav 4.3 and i should go to fourms and chk ....
please help as i want to root the device and install a custom recovery to be able to flash roms and mods.
i tried flashing a theme mod blue(touchwiz) with stock recovery and it didnt do anything just rebooted to normal touch wiz ....
Any help is appreciated .....
Hi to everyone,
Im pretty new here and havent got much ''knowledge about flashing etc.
I got a note 3 Last Year and, rooted it back then with Towelroot.
Everything worked fine and by time i had to trigger Knox and flashed Philz recovery and Cyanogenmod.
Worked fine too->bored from AOSP->Flashed the Samsung Galaxy s5 Port for my N9005. 2 Months ago,
I actually wanted to flash Pureperfomances with it but didnt worked due to ''permission problems''.
Know i actually tried again to flash it but didnt worked of course.
I had read somewhere that i just have to update my Philz Touch 6.8 to a higher Variant to be able to flash Pureperfomances.
Tried to update my Recovery trough Odin by flashing it via download MOde and Odin to a newer variant.
got into a Bootloop when triying to start recovery, had to get to normal boot trough combining buttons to Download mode and restarted.
Phone and everything else worked fine.
Then tried again to flash an older Variant of Philz and had no success.
after that tried to flash TWRP and didnt succeed too.
tried normal cwm but got the same problem.
Phone continously tries to get into recovery and reboots before starting it. can only see ''recovery booting'' and of coure the ''Kernel not SEAndroid enforcing''.
Got out of Bootloop through Download Mode again.
after trying to flash the same variant of Philz that i had at the start through Odin i didnt get the ''SUCCESS'' Message from Oin just a ''RESET'' in Blue.
same problem of Bootloop of Recovery.
Accessed System again and flashed my old Philz Recovery IMG out of a NAndroid BAckup through the Android App ''Rashr''
(Rashr cant find the right recovery for me Autromatic. Shows me recoveries for s5, cause my Build Prop got the S5 Data in it.)
got my recovery back but got the Problem of not being able to Flash a goddamn recovery.
Please could someone help me with this Issue/problem i got.
And could someone explain me the difference of a TAR.MD5 File Recovery and a IMG Recovery. Odin is just able to flash a TAR
Please Excuse my Spelling and Grammatics.
Had no time for corrections and im German. Aint got that English Practice
German Forums are almost empty and noone ever replies.
I hope you people can help me.[/I][/I][/B][/B]
If it helps in Some Way:
I am using the S5 Stock Port v6.0 From FahadAli
And the Aurora Kernel 11
[full Name:
Linux Version 3.4.93-
AURORA_KERNEL_R11_
eur
([email protected])
(gcc version 4.10.0
20140521
(experimental)(UBER-
Linaro-4.10.0_arm+gra
phite))#1 SMP
PREEMPT Sat jun 14
23:19:24 CEST 2014]
abdullah30539 said:
Hi to everyone,
Im pretty new here and havent got much ''knowledge about flashing etc.
I got a note 3 Last Year and, rooted it back then with Towelroot.
Everything worked fine and by time i had to trigger Knox and flashed Philz recovery and Cyanogenmod.
Worked fine too->bored from AOSP->Flashed the Samsung Galaxy s5 Port for my N9005. 2 Months ago,
I actually wanted to flash Pureperfomances with it but didnt worked due to ''permission problems''.
Know i actually tried again to flash it but didnt worked of course.
I had read somewhere that i just have to update my Philz Touch 6.8 to a higher Variant to be able to flash Pureperfomances.
Tried to update my Recovery trough Odin by flashing it via download MOde and Odin to a newer variant.
got into a Bootloop when triying to start recovery, had to get to normal boot trough combining buttons to Download mode and restarted.
Phone and everything else worked fine.
Then tried again to flash an older Variant of Philz and had no success.
after that tried to flash TWRP and didnt succeed too.
tried normal cwm but got the same problem.
Phone continously tries to get into recovery and reboots before starting it. can only see ''recovery booting'' and of coure the ''Kernel not SEAndroid enforcing''.
Got out of Bootloop through Download Mode again.
after trying to flash the same variant of Philz that i had at the start through Odin i didnt get the ''SUCCESS'' Message from Oin just a ''RESET'' in Blue.
same problem of Bootloop of Recovery.
Accessed System again and flashed my old Philz Recovery IMG out of a NAndroid BAckup through the Android App ''Rashr''
(Rashr cant find the right recovery for me Autromatic. Shows me recoveries for s5, cause my Build Prop got the S5 Data in it.)
got my recovery back but got the Problem of not being able to Flash a goddamn recovery.
Please could someone help me with this Issue/problem i got.
And could someone explain me the difference of a TAR.MD5 File Recovery and a IMG Recovery. Odin is just able to flash a TAR
Please Excuse my Spelling and Grammatics.
Had no time for corrections and im German. Aint got that English Practice
German Forums are almost empty and noone ever replies.
I hope you people can help me.[/I][/I][/B][/B]
If it helps in Some Way:
I am using the S5 Stock Port v6.0 From FahadAli
And the Aurora Kernel 11
[full Name:
Linux Version 3.4.93-
AURORA_KERNEL_R11_
eur
([email protected])
(gcc version 4.10.0
20140521
(experimental)(UBER-
Linaro-4.10.0_arm+gra
phite))#1 SMP
PREEMPT Sat jun 14
23:19:24 CEST 2014]
Click to expand...
Click to collapse
Try to flash your stock firmware again using odin.
Device : SM-910G
Recovery : TWRP
Previous ROM : CM 12.1 : cm-12.1-20150828-NIGHTLY-trltexx
My Phone is stuck in a bootloop after flashing Emotion_Revolution_R8_final.
BTW. I had Wiped Data,Cache,Dalvik Cache,System prior to installing Emotion_Revolution_R8_final.zip.
Not sure if I Need to Flash a kernel or something.
Its my first post on xda developers, Any help would be much appreciated.
I followed this post for understanding the flash procedure. http://forum.xda-developers.com/note-4/snapdragon-dev/twrom-emotion-revolution-note-iv-t2976107
You should flash only ROMs supported by your device (N910G).
Anyway, how you can read here after boe1 samsung firmware ROMs for N910F can be flashed to N910G if you have the right modem and bootloader.. If you want to use that ROM try flashing via ODIN this modem and bootloader for N910G and maybe you'll be able to use Emotion Revolution ROM
I'll Try and let you know. Thanks
you must check your Baseband
im prety sure you're still on BOB4 if you previously used CM 12.1, you must downgrade to BOB3 to install the ROM, flash the 5.0.1 " STOCK " Boot Loader and BOC3 Modem Via Odin and then flash the rom careful with this operation you must know exactly every step !!!
Mod Edit links removed
ROM-HUAWEI said:
Samsung J1 Ace SM-J110F/SM-J110M/SM-J110G ROOT / TWRP / Stock RECOVERY / Stock BOOT
1. Flash custom recovery TWRP. Used TWRP 2.8.7.0:
TWRP 2.8.7.0 SM-J110F
TWRP 2.8.7.0 SM-J110G
TWRP 2.8.7.0 SM-J110M
Not work SM-J110H and SM-J110L
2. Install used TWRP SuperSU_2.46.zip [KNOX 0x0]
3. If need restore stock recovery, download and flash AP STOCK RECOVERY + BOOT.
All files flash ODIN.
Stock Firmware ROM - Download
Click to expand...
Click to collapse
Worked great! SM-J110F
Wait version SM-J110L
TWRP on J110M
I installed the TWRP (TWRP 2.8.7.0 SM-J110M) recovery using Odin but when i try to enter it, pressing Volume UP + Home + Power, my phone goes into the stock android recovery. Am I missing something? What key-combo did you used? I have a Galaxy ACE J1 (SM-J110M). Thanks in advance.
SM-J110M not worked
Same problem here. ¿any suggestion?, thanks-
AP: J110MUBU0AOK2
CP: J110MUBU0AOK3
CSC: J110MUWA0AOK1
Model Number:SM-J110M
Android Version: 5.1.1
Baseband Version:J110MUBU0AOK3
Kernel Version: 3.14.27-866717
[email protected] #1
Tue Nov 3 20:17:124 KST 2015
Build Number
LMY48BJ110MUBU0AOK2
Android security patch
2015-11-01
who get TWRP not installed (back to stock recovery after flashing)
try to untick autoreboot in odin
when odin say PASS/RESET with blue/green screen
remove USB cable, then try to boot TWRP manually (POWER+VOLUP+HOME)
regards
frtorres said:
Same problem here. ¿any suggestion?, thanks-
AP: J110MUBU0AOK2
CP: J110MUBU0AOK3
CSC: J110MUWA0AOK1
Model Number:SM-J110M
Android Version: 5.1.1
Baseband Version:J110MUBU0AOK3
Kernel Version: 3.14.27-866717
[email protected] #1
Tue Nov 3 20:17:124 KST 2015
Build Number
LMY48BJ110MUBU0AOK2
Android security patch
2015-11-01
Click to expand...
Click to collapse
I noticed, under developer options, USB debugging can not be set on or off (seems inactivated from fabric)
Does this affect why I can not root my device?
frtorres said:
I noticed, under developer options, USB debugging can not be set on or off (seems inactivated from fabric)
Does this affect why I can not root my device?
Click to expand...
Click to collapse
Finally I reinstall stock firmware from SAM Mobile, but same results. somehow trying to install TWRP is refused when entering recovery mode.
If I disable in Odin reboot option and carefully enter to recovery avoiding the system to restore the old recovery, It will no enter recovery mode until I let the phone show the telco logo and then I get original recovery.
As something new I noticed USB debugginf ius disable to turn it ON/OFF. This is a mobile phone in a company plan with the local telco. Maybe it is restricted to root or to install another firmware.
I give up... I appreciate comments on this...
when you finish the flash of the TWRP file for J110M you must be hold the vol up and home until the phone reboot twice, the second reboot enter to the TWRP mode
I have the j110m and the way to get TWRP to work is to try both versions. 3.0.0.0 got stuck on the boot and never got me into recovery it always went to the provider logo. I tried the other one (2.XX) with ODIN, had auto reboot ticked off, and just like the guy above said wait till the second boot. Voila
---------- Post added at 04:48 PM ---------- Previous post was at 04:45 PM ----------
by the way, is there any chance in seeing Cyanogenmod on this? Im looking and looking but I cant find anything. Just one post where some guy wants to port CM 12 but no one has responded to his post yet.
frutsy said:
when you finish the flash of the TWRP file for J110M you must be hold the vol up and home until the phone reboot twice, the second reboot enter to the TWRP mode
Click to expand...
Click to collapse
thx a lot buddy... finally i can boot my j110g into twrp recovery mode after flashing using odin and your method:good::good::good:
Android 5.1.1 for Samsung Galaxy J1 Ace SM-J110F
Is there any way possible to get android 5.1.1 on my J1 ACE SM-J110F.
help
Sir help me how to root n install twrp recovery mod on my galaxy j110f ace
Hi everybody,
It's been a while I tried to flash CWM touch using odin... and after it failed, my phone didn't started it displayed :"firmware upgrade encountered an issue"
I followed this video instructions and it started again
I didn't realized the file used in this video was made for SIII (i9300) !
philz_touch_6.07.9-i9300.tar.md5
May be that's why I can't access to the inbuilt recovery mode and not that flashed recovery either...
Last night, I tried to flash another CWM version. It failed and I had to do the same thing again
Anyway, I could restore original recovery menu or install an appropriate custom recovery on my phone ?
Please I don't like to flash a new rom these days. Phone is doing great !
Thank you
Phone model : GT-I9505
Device Type: jflte
product name: jfltexx
Knox void : 0x1
More info about my version :
AP: i9505XXUFNB9
CP: i9505XXUFNB9
CSC : i9505XXUFNB2
Product code : GT-I9505ZKALUX
Android version : 4.4.2
Build number: KOT49H.i9505XXUFNB9
Kernel : 3.4.0-481100
[email protected] #1
32-bit
Download twrp for your device from twrp.me and flash the tar version in Odin.
https://dl.twrp.me/jfltexx/
Does your phone boot? If it boots and is rooted you could use the app Flashify to flash the twrp.img file. No Odin required.
You can download the img file from the link in the previous post.
Thank you guys
I didn't found your replies in the notifications !
That's a good idea. I went to official CWM website and flashed the appropriate version using SGS4 flasher
https://play.google.com/store/apps/details?id=nl.bvgemert.flasher&hl=en
Now I'm ok with the last CWM touch version.
Thank you
bileldjerba said:
Thank you guys
I didn't found your replies in the notifications !
That's a good idea. I went to official CWM website and flashed the appropriate version using SGS4 flasher
https://play.google.com/store/apps/details?id=nl.bvgemert.flasher&hl=en
Now I'm ok with the last CWM touch version.
Thank you
Click to expand...
Click to collapse
You should take into consideration that CWM is outdated and you may have flash issues due to that reason.