Database Users

Honor 7i / Huawei Shotx TWRP (EN)

Honor 7i / Huawei Shotx TWRP (english) for Android 5
Use adb command:
fastboot flash recovery recovery.img
fastboot reboot
http://www.file-upload.net/download-11539996/recovery.img.html

Link not workking
stas30 said:
Honor 7i / Huawei Shotx TWRP (english) for Android 5
Use adb command:
fastboot flash recovery recovery.img
fastboot reboot
http://www.file-upload.net/download-11539996/recovery.img.html
Click to expand...
Click to collapse
link not working!!

stas30 said:
Honor 7i / Huawei Shotx TWRP (english) for Android 5
Use adb command:
fastboot flash recovery recovery.img
fastboot reboot
http://www.file-upload.net/download-11539996/recovery.img.html
Click to expand...
Click to collapse
link is not working.please repair your link

Stock Recovery 21.40.1220.1615

Stock Recovery for Zenfone 2 Laser 550kl
Extracted from stock firmware 21.40.1220.1615 based on Android M
LINK
if it asked for a key - !rVFrBiByinxK-01M4H_uXzX5P5lKRyY3y0LPYS6q6BQ
Flashing Guide :-
1.) To flash permanently -
Code:
fastboot flash recovery stockRecovery-21.40.1220.1615.img
2.) To just boot into the stock recovery (not permanent)
Code:
fastboot boot stockRecovery-21.40.1220.1615.img
XDA:DevDB Information
STOCK RECOVERY for ZE550KL, Tool/Utility for the Asus ZenFone 2
Contributors
PaViTrA14
Version Information
Status: Stable
Current Stable Version: 21.40.1220.1615
Created 2016-08-10
Last Updated 2016-08-10

Reserved

Twrp 3.2 not work on wileyfox storm kipper

Hello,
I try to install new ROM on my wileyfox storm.
I forgot to backup the old ROM.
When I flash recovery with Twrp 3.2.x (all versions on Android developer), the recovery doesn't reboot correctly.
My phone information :
FASTBOOT MODE
PRODUCT_NAME - KIPPER
VARIANT - QRE eMMC
BOOTLOADER VERSION - kipper-N-g6dffaf3
BASEBAND VERSION -
SERIAL NUMBER - xxxxxx
SECURE BOOT - enabled
DEVICE STATE - unlocked
I can install twrp 3.0.x, but with this version I can't install all the custom ROM and the installation of GAPPS fail and the twrp reboot without any error message.
Please help me.
Thanks
Thomas

tested TWRP :
88839c45b0a7d2bf6d64d458b59bc254 *TWRP-2.8.7.0-kipper-blue-recovery.img => recovery not launch
031da5da7e96c55cf6d6dd7c427f5c44 *TWRP-2.8.7.0-kipper-recovery.img => recovery not launch
5a7019c140308aff75946b38ceae055f *twrp-3.0.2-1-kipper.img => recovery OK
936495c6ec995e8b375ad414ef2e8674 *TWRP-3.0.3.0-kipper.img => recovery OK
0dcd6636fd71d85ecb497d9c21ff761a *TWRP-3.2.1-0.img => recovery not launch
cf037bbe6e4f0266ddf70fe5a68fd999 *twrp-3.2.1-0-kipper-20180110.img => recovery not launch
01a2a04bf5ce789d9a08bd737c7518b5 *TWRP-3.2.2-0-kipper.img => recovery not launch
TWRP 3.1.0-0.img => not found on web
TWRP 3.1.1-1.img => not found on web
TWRP3.1.1-0.img => not found on web
For Gapps :
936495c6ec995e8b375ad414ef2e8674 *TWRP-3.0.3.0-kipper.img => impossible to install GAPPS
5a7019c140308aff75946b38ceae055f *twrp-3.0.2-1-kipper.img => impossible to install GAPPS
Only one ROM can be installed :
AospExtended-v5.8-kipper-20180926-1028-UNOFFICIAL.zip => but without gapps, it's useless and the GPS doesn't work
:crying::crying:
Thomas

OK i try another method.
Download CM from this site : https://cyanogenupdatetracker.com/downloads/
3c8ad411f960acee450ee3644503650e *cm-13.1.2-ZNH2KAS3NA-kipper-signed-fastboot-1eb4b5e94b.zip
unzip and launch this command manually
Code:
fastboot flash aboot emmc_appsboot.mbn
fastboot erase DDR
fastboot flash sbl1 sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash rpm rpm.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot erase splash
fastboot flash splash splash.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
Phone boot with the CM Recovery only

OK,
I tried to "apply update" with CM recovery and this file :
2a0d058f73d29a66be85d4b048a4562b *SW23-WF-KIPPER-CM-13.1.5-ZNH2KAS7EC-RECOVERY.zip
the phone boot and the gapps are already in the phone

[DiscoveryAndroid] Guide For Flashing GSIs for all Android devices (2021)

Hi every one, in this thread, I will guide How to Flashing GSIs for all Android devices (2021).
- A to Z for new babie, just only fastboot guide.
- I'm highly recommend using pHH GSIs image rom. (List here) AND DO NOT ASK ME SGSI ROM.
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
1. Prepair:
- Brain (to understand what I write below and make sure u will do it right)
- Using this app Treble Info to check your devices is support Treble (A/B, A only or VNDK)
- Unlock your Bootloader devices.
- Payload dumper for extract payload.bin BASE Rom. -> Check this video HOW TO EXTRACT Payload.bin rom
- U must be on stock rom to flashsing GSIs rom (flashing your stock rom on 1 slot, DO NOT FLASH ON BOTH SLOT). If u are on custom rom, then u will need to flash stock rom again.
- ADB driver, fastboot driver (guide for windows)
​1.1 BASE ROM: Highly recommend using Lineage OS rom for base rom. (and u can try with another base rom, for example, on xiaomi devices, u have MIUI rom and AOSP rom aka OSS, and u can try both of these for BASE ROM)​All u need in base rom:​- vendor.img (must be in the same BASE ROM with boot.img) DO NOT try to mix with another boot.img​- boot.img (must be in the same BASE ROM with vendor.img) DO NOT try to mix with another vendor.img​- system_vbmeta.img (or vbmeta.img) or u can download this vbmeta.img here​- patched magisk boot.img (if u want to root your devices)​- vendor overlays: Some devices with notch/hole need this. (u can extract your stock rom to have this)​- phh magisk v23 (download here)​​1.2 GSI ROM: I'm highly recommend using pHH GSIs image rom. (List here)​All u need in GSI rom:​- Yes, GSI rom aka system.img (recommend to rename it system.img)​- product.img (download here) - credit @kusti420​​​2. Flashing:
- Guide for A/B devices.
- Put your devices on FastbootD (using code adb reboot fastboot or using physical buttons power key and volume down key to make devices go to bootloader, then using code fastboot reboot fastboot to make your devices is on FASTBOOTD mode)
- Using these code instructions below: all in FastbootD
Step1:
Code:
fastboot getvar current-slot (see which slot u are using. Ex: a , b)
fastboot --set-active=b (if u are using slot a, change b to a) to make sure u're flashing gsi on 1 slot
Step2: vbmeta.img, vendor.img is from BASE ROM. product_gsi.img is from GSI ROM
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
fastboot flash product product_gsi.img
Step3: system.img is from GSI ROM. Some devices is request system.img <3GB, so your choise vanilla or full GAPPS GSI ROM.
Code:
fastboot erase system
fastboot flash system system.img
Step4: -w will wipe all data in your devices. boot.img is from BASE ROM.
Code:
fastboot -w
fastboot flash boot boot.img
fastboot reboot
Step5: when your gsi rom booted, flash boot patched magisk to have it root.
If it NOT BOOT, try to delete your product.img
Code:
fastboot delete-logical-partition product
If it NOT BOOT, change another vendor, boot from another BASE ROM!!!!
Good luck guys!!!!!
Successed boot GSI ROM ON PIXEL 4, PIXEL 3, PIXEL 3XL, XIAOMI REDMI K40.
I will make auto file flashing gsi rom later.
Video prop gsi rom, video guide on post 2.
Bugs + FAQ in #3
CREDIT:
@phhusson for all GSI ROM
@Allexwin50 for product_gsi

1. VIDEO GUIDE
2. Review
- Dot OS 5.2 GSI rom on Pixel 4:

BUGS ON PIXEL:
-VOLTE

i see you took that product img from my post, but you credited the wrong person for it
@Allexwin50 is the one who made it afaik, you can also see him being mentioned in my post for it

nice guide. i'm curious to test on my note 10 5g with mtk cpu. but i dont have a second phone. its a shame cause i'm modding addicted. but i can't risk to brick my phone. maybe in future... or if i buy a second phone. like note 8 2021

wetito said:
nice guide. i'm curious to test on my note 10 5g with mtk cpu. but i dont have a second phone. its a shame cause i'm modding addicted. but i can't risk to brick my phone. maybe in future... or if i buy a second phone. like note 8 2021
Click to expand...
Click to collapse
wym by "note 8 2021"???????

because i would like to test on mtk device

nambavuong said:
Hi every one, in this thread, I will guide How to Flashing GSIs for all Android devices (2021).
- A to Z for new babie, just only fastboot guide.
- I'm highly recommend using pHH GSIs image rom. (List here) AND DO NOT ASK ME SGSI ROM.
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
1. Prepair:
- Brain (to understand what I write below and make sure u will do it right)
- Using this app Treble Info to check your devices is support Treble (A/B, A only or VNDK)
- Unlock your Bootloader devices.
- Payload dumper for extract payload.bin BASE Rom. -> Check this video HOW TO EXTRACT Payload.bin rom
- U must be on stock rom to flashsing GSIs rom (flashing your stock rom on 1 slot, DO NOT FLASH ON BOTH SLOT). If u are on custom rom, then u will need to flash stock rom again.
- ADB driver, fastboot driver (guide for windows)
​1.1 BASE ROM: Highly recommend using Lineage OS rom for base rom. (and u can try with another base rom, for example, on xiaomi devices, u have MIUI rom and AOSP rom aka OSS, and u can try both of these for BASE ROM)​All u need in base rom:​- vendor.img (must be in the same BASE ROM with boot.img) DO NOT try to mix with another boot.img​- boot.img (must be in the same BASE ROM with vendor.img) DO NOT try to mix with another vendor.img​- system_vbmeta.img (or vbmeta.img) or u can download this vbmeta.img here​- patched magisk boot.img (if u want to root your devices)​- vendor overlays: Some devices with notch/hole need this. (u can extract your stock rom to have this)​- phh magisk v23 (download here)​​1.2 GSI ROM: I'm highly recommend using pHH GSIs image rom. (List here)​All u need in GSI rom:​- Yes, GSI rom aka system.img (recommend to rename it system.img)​- product.img (download here) - credit @kusti420​​​2. Flashing:
- Guide for A/B devices.
- Put your devices on FastbootD (using code adb reboot fastboot or using physical buttons power key and volume down key to make devices go to bootloader, then using code fastboot reboot fastboot to make your devices is on FASTBOOTD mode)
- Using these code instructions below: all in FastbootD
Step1:
Code:
fastboot getvar current-slot (see which slot u are using. Ex: a , b)
fastboot --set-active=b (if u are using slot a, change b to a) to make sure u're flashing gsi on 1 slot
Step2: vbmeta.img, vendor.img is from BASE ROM. product_gsi.img is from GSI ROM
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
fastboot flash product product_gsi.img
Step3: system.img is from GSI ROM. Some devices is request system.img <3GB, so your choise vanilla or full GAPPS GSI ROM.
Code:
fastboot erase system
fastboot flash system system.img
Step4: -w will wipe all data in your devices. boot.img is from BASE ROM.
Code:
fastboot -w
fastboot flash boot boot.img
fastboot reboot
Step5: when your gsi rom booted, flash boot patched magisk to have it root.
If it NOT BOOT, try to delete your product.img
Code:
fastboot delete-logical-partition product
If it NOT BOOT, change another vendor, boot from another BASE ROM!!!!
Good luck guys!!!!!
Successed boot GSI ROM ON PIXEL 4, PIXEL 3, PIXEL 3XL, XIAOMI REDMI K40.
I will make auto file flashing gsi rom later.
Video prop gsi rom, video guide on post 2.
Bugs + FAQ in #3
CREDIT:
@phhusson for all GSI ROM
@Allexwin50 for product_gsi
Click to expand...
Click to collapse
Is possible flash Gsi A11 or A12 in Huawei Mate9 runing Harmony OS ?

aureliolage said:
Is possible flash Gsi A11 or A12 in Huawei Mate9 runing Harmony OS ?
Click to expand...
Click to collapse
Hi, I have a MHA-L29 that I bootloader unlocked with PotatoNV and have twrp and android gsi by phh installed, I can help but I can't guarantee anything as you have a china model

SamJN1344 said:
Hi, I have a MHA-L29 that I bootloader unlocked with PotatoNV and have twrp and android gsi by phh installed, I can help but I can't guarantee anything as you have a china model
Click to expand...
Click to collapse
Can help me but here i run Harmony os

SamJN1344 said:
Hi, I have a MHA-L29 that I bootloader unlocked with PotatoNV and have twrp and android gsi by phh installed, I can help but I can't guarantee anything as you have a china model
Click to expand...
Click to collapse
??

buy a huawei with Harmony for modding.... curious choice

Lenovo didnt provide vendor.img for my tablet TB-J606F how can I backup\extract it from existing system?
I have root and I tried dd if=/dev/l9Y/.magisk/block/vendor .... and it didnt have permission. Is this only works on custom recovery? becuse I didnt find any for my device
I tried just flashing GSI 12 on the tablet and it worked but auto brightness and some more small but anoying suff didnt work perfect

Code:
fastboot --disable-verity --disable-verification flash system GSI.img
Does this code make our system becoming fail to pass safetynett ? i dont know either . coz for me , after using kdragon zygisk safetynet fix also cant pass cts and basic test. im on ancientOS GSI right now for my mojito device

I was on a custom ROM, used this guide, I didn't even have to flash the stock ROM. I flashed crDroid GSI.

ronen1n said:
Lenovo didnt provide vendor.img for my tablet TB-J606F how can I backup\extract it from existing system?
I have root and I tried dd if=/dev/l9Y/.magisk/block/vendor .... and it didnt have permission. Is this only works on custom recovery? becuse I didnt find any for my device
I tried just flashing GSI 12 on the tablet and it worked but auto brightness and some more small but anoying suff didnt work perfect
Click to expand...
Click to collapse
Do you have super.img??

Benjamin B C H said:
Do you have super.img??
Click to expand...
Click to collapse
For that, use product GSI to be able to flash the system image. Worked for me.

Benjamin B C H said:
Do you have super.img??
Click to expand...
Click to collapse
I have 5 super files

ronen1n said:
I have 5 super files
Click to expand...
Click to collapse
Extract those super images and you might get the vendor file

Benjamin B C H said:
Extract those super images and you might get the vendor file
Click to expand...
Click to collapse
how can I do it? I tried few tools and it didnt work

REDMI 7A Bootloop no matter what flash method I used , HELP!

Phone redmi 7a china variant. MIUI 12.5
My fathers phone suddenly bootloop in the middle of using, I use MI flash pro and flash using fastboot no luck, I used stock china rom miui 10, miui 12 global still no luck, i install TWRP 64 bit and flash recovery rom miui 12 and miui 10 still no luck i even flash custom PE still no luck , btw i use clean flashes wipe and format data. the phone just stock in redmi logo bootlooping, sometimes when i use fastboot flashes it work after i charge the phone but it wont last a couple of minutes and go black and bootloop again. i would like to ask what is wrong?, im not new in custom roms and phone tweakings but this trouble is pain.
My flash steps
NEW STEP for PINE only
1. format data and advance wipe vendor,internal,dalvik,data,system and cache
2. install rom and wipe cache, then format data again and reboot.
OLD STEP
1. advance wipe vendor,dalvik,data,system and cache
2. install rom wipe cache or skip and direct reboot.

download fastboot rom
Redmi 7A (pine) China Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Redmi 7A (pine) China official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and Fastboot (need mi …
xiaomirom.com
fextract and find vbmeta.img under images folder
Then
fastboot --disable-verity --disable-verification flash vbmeta C:\.../vbmeta.img
where "C:\.../vbmeta.img is replaced by the directory of vbmeta.img

LR7875 said:
download fastboot rom
Redmi 7A (pine) China Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Redmi 7A (pine) China official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and Fastboot (need mi …
xiaomirom.com
fextract and find vbmeta.img under images folder
Then
fastboot --disable-verity --disable-verification flash vbmeta C:\.../vbmeta.img
where "C:\.../vbmeta.img is replaced by the directory of vbmeta.img
Click to expand...
Click to collapse
thanks I'll try this..

LR7875 said:
download fastboot rom
Redmi 7A (pine) China Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Redmi 7A (pine) China official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and Fastboot (need mi …
xiaomirom.com
fextract and find vbmeta.img under images folder
Then
fastboot --disable-verity --disable-verification flash vbmeta C:\.../vbmeta.img
where "C:\.../vbmeta.img is replaced by the directory of vbmeta.img
Click to expand...
Click to collapse
btw , which first? do i flash the stock rom first then vbmeta.img ? thanks much appreciated.

Luffy83 said:
btw , which first? do i flash the stock rom first then vbmeta.img ? thanks much appreciated.
Click to expand...
Click to collapse
No no need flash stock ROM yet just flash the vbmeta, try flashing custom ROM and boot, if it does not work then try the stock rom

LR7875 said:
No no need flash stock ROM yet just flash the vbmeta, try flashing custom ROM and boot, if it does not work then try the stock rom
Click to expand...
Click to collapse
thanks ill try then, much appreciated

Luffy83 said:
thanks ill try then, much appreciated
Click to expand...
Click to collapse
I had the same problem. I explained what I did here: https://forum.xda-developers.com/t/...er-and-install-twrp-rom.4526205/post-87940671
I hope it helps if the method suggested by @LR7875 doesn't work haha