cm-11.0-XNPH25R-bacon-signed
this update addresses improvements for NFC and gyroscopebehavior
full ROM and update
http://pan.baidu.com/s/1dDEeyWD
enjoy!
NICE, thanks a lot for your share.
Why not get it from Cyanogen itself?? Here
This is a image to flash with Clockworkmod or TWRP right?
Or is it better to just download the fastboot version from CM's site?
cm-11.0-XNPH25R-bacon-signed-fastboot.zip
Don't download the rom from some Chinese forum. Get it from the legitimate source with matching checksum. As mentioned, scroll down to bottom of this page: https://cyngn.com/products/oneplusone/
hi, i have a question, i download the update 25R (i have 22R). i udate de fastboot, what have to make it work? I go to system update and in recovery mode i go to "apply update", "choose from internal storage" and i press in the update download, but put "E: fooer is wrong" and "E: signature verification failed" and not update.
what i can do?
erike_m8 said:
hi, i have a question, i download the update 25R (i have 22R). i udate de fastboot, what have to make it work? I go to system update and in recovery mode i go to "apply update", "choose from internal storage" and i press in the update download, but put "E: fooer is wrong" and "E: signature verification failed" and not update.
what i can do?
Click to expand...
Click to collapse
You have to boot into fastboot mode and flash the files manually. Search for a guide because if you do it wrong you will brick your phone.
Chris123NT said:
You have to boot into fastboot mode and flash the files manually. Search for a guide because if you do it wrong you will brick your phone.
Click to expand...
Click to collapse
thanks so much ! and where i can find a guide? what guide?
erike_m8 said:
thanks so much ! and where i can find a guide? what guide?
Click to expand...
Click to collapse
Guide is in the forum:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Commands:
Flash the factory image
Once you've unlocked the bootloader, and rebooted the phone, turn the phone off and back on into fastboot mode and reconnect it to the PC. You can now flash the factory image files. Do each of these, one at a time (you can use 'fastboot reboot-bootloader' after each partition if you wish but this is optional)
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash userdata userdata_64g.img (or userdata.img for 16G version)
fastboot oem lock (if you wish to relock the bootloader. If not, ignore this part)
fastboot reboot
Click to expand...
Click to collapse
I have tried to install twrp recovery via fastboot and I get this error
1.C:\fastboot>fastboot flash recovery recovery.img
2.target reported max download size of 1526722560 bytes
3.error: cannot load 'recovery.img': No error
All other commands work to erase, reboot etc, but cannot flash recovery twrp on to my LGG2 D803 , any help will be appreciated.
Got it to work but flashed 3 different twrp and cm mod img and will not boot into recovery
Well if you ever Brick your phone to the point that the only thing that works is Fastboot, I was able to recover my phone using this procedure, It was a lifesaver. The phone works perfectly now, follow the Youtube instructions, I also typed the procedure out too. Always type fastboot flash then the command
https://www.youtube.com/watch?v=hQVTc2m6U-I
Use above link to completely redoo your LGG2 from fastboot, re loading all the partitions.
fastboot flash boot boot.img
aboot aboot.img
recovery recovery.img
laf laf.img
dbi dbi.img
modem modem.img
persist persist.img
PrimaryGPT PrimaryGPT.img
rpm rpm.img
stli stli.img
tz tz.img
fastboot flash reboot
after flashing all the partitions it should load so you can flash the tot/kdz file via flash utility 2014 in the command mode, by holding the volume up mode and plugging in the usb into the phone. then reload the original firmware and install twrp and if you want wipe it and reload one of the custom roms.
Well if you ever Brick your phone to the point that the only thing that works is Fastboot, I was able to recover my phone using this procedure, It was a lifesaver. The phone works perfectly now, follow the Youtube instructions, I also typed the procedure out too. Always type fastboot flash then the command
https://www.youtube.com/watch?v=hQVTc2m6U-I
Use above link to completely redoo your LGG2 from fastboot, re loading all the partitions.
fastboot flash boot boot.img
aboot aboot.img
recovery recovery.img
laf laf.img
dbi dbi.img
modem modem.img
persist persist.img
PrimaryGPT PrimaryGPT.img
rpm rpm.img
stli stli.img
tz tz.img
fastboot flash reboot
after flashing all the partitions it should load so you can flash the tot/kdz file via flash utility 2014, in the command mode, by holding the volume up button and plugging in the usb into the phone. then reload the original firmware and install twrp and if you want wipe it and reload one of the custom roms.
I managed to soft brick my Storm with one of the CM13 updates (both normal boot and recovery just resulted in a black flickering screen), it seems others are having similar issues so here are instructions for restoring your phone to the stock image, this fixed the brick for me.
You need fastboot so download and install the Android SDK if not already present: http://developer.android.com/sdk/installing/index.html
Download and uncompress the stock Cyanogen OS fastboot zip: https://cyngn.com/support
Boot your phone into fastboot mode, (plug in USB then hold down vol+ and power until rebooted, keep holding vol+ until in fastboot)
Start a shell/command prompt on your computer to execute the commands below.
THIS WILL WIPE EVERYTHING!!! - THIS IS A COMPLETE STOCK RESTORATION!!!
Execute these fastboot commands from within the extracted stock zip directory:
Code:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot erase DDR
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash tzbak tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash hypbak hyp.mbn
fastboot flash rpm rpm.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot erase splash
fastboot flash splash splash.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
If the cache command gives an error try continuing anyway.
If you want to try to save your user data skip the userdata command, but no guarantees.
Search the other threads on XDA for instructions on booting or flashing custom recoveries, ROMs, root etc.
I've also bricked my Storm with cm13 update in January . I flashed every img using fastboot and it recovered. i skipped the other files and it still works. Good that someone written tutorial for others. I was planning to write it by myself but you were faster
I have made a simple batch script that executes the commands by itself. You need to unzip and place these 2 files into images direction. It should look like this:
View attachment 3656958
Click on picture to make it bigger
then just connect your device in fastboot mode and open the FLASH-ALL.bat file. Press enter. It will flash all the images. IT WILL ONLY WORK IF FILES WILL BE PLACED LIKE ON THE SCREENSHOT!!
I got blinking brick. I can not go into fastboot
@up Don't connect the usb cord. While it's blinking press and hold vol up+ power for 10 seconds, release power button and it should go into fastboot.
If no, let it fully discharge, and then try volup + power
95% of the time flashing system should do the trick. Otherwise the flashall argument should save you a lot of typing.
aciupapa said:
I've also bricked my Storm with cm13 update in January . I flashed every img using fastboot and it recovered. i skipped the other files and it still works. Good that someone written tutorial for others. I was planning to write it by myself but you were faster
Click to expand...
Click to collapse
my storm is dead, i cant get into recovery or download mode....any advice...i did get it rooted and the recovery...i flash the cm 13 kipper and it went dead...red light comes on when charging or usb connection.
miSAKe said:
I managed to soft brick my Storm with one of the CM13 updates (both normal boot and recovery just resulted in a black flickering screen), it seems others are having similar issues so here are instructions for restoring your phone to the stock image, this fixed the brick for me.
You need fastboot so download and install the Android SDK if not already present: http://developer.android.com/sdk/installing/index.html
Download and uncompress the stock Cyanogen OS fastboot zip: https://cyngn.com/support
Boot your phone into fastboot mode, (plug in USB then hold down vol+ and power until rebooted, keep holding vol+ until in fastboot)
Start a shell/command prompt on your computer to execute the commands below.
THIS WILL WIPE EVERYTHING!!! - THIS IS A COMPLETE STOCK RESTORATION!!!
Execute these fastboot commands from within the extracted stock zip directory:
Code:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot erase DDR
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash tzbak tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash hypbak hyp.mbn
fastboot flash rpm rpm.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot erase splash
fastboot flash splash splash.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
If the cache command gives an error try continuing anyway.
If you want to try to save your user data skip the userdata command, but no guarantees.
Search the other threads on XDA for instructions on booting or flashing custom recoveries, ROMs, root etc.
Click to expand...
Click to collapse
Perfect, thanks.
Would have worked FIRST time if I'd read your instructions properly, instead it worked the SECOND time. Important to download "the stock Cyanogen OS fastboot zip" from the Cyngn support page - there are two similar looking files and obviously I picked the wrong one first.
Thanks again.
miSAKe said:
Hello,
As you know, cyngn.com is unavailable. i need kipper files, specially original recovery.img
do you know any alive link(s)? or can you upload/send to me?
thanks very much
Click to expand...
Click to collapse
ftabashir said:
miSAKe said:
Hello,
As you know, cyngn.com is unavailable. i need kipper files, specially original recovery.img
do you know any alive link(s)? or can you upload/send to me?
thanks very much
Click to expand...
Click to collapse
here
https://www.androidfilehost.com/?w=files&flid=59917
Click to expand...
Click to collapse
ghertas said:
ftabashir said:
here
https://www.androidfilehost.com/?w=files&flid=59917
Click to expand...
Click to collapse
thanks. but this is the whole ROM. i downloaded it and couldn't find "recovery.img". how can i find original recovery for kipper (wileyfox storm)?
Click to expand...
Click to collapse
ftabashir said:
ghertas said:
thanks. but this is the whole ROM. i downloaded it and couldn't find "recovery.img". how can i find original recovery for kipper (wileyfox storm)?
Click to expand...
Click to collapse
cm-13.1.2
instal via ADB Fastboot
youtube help you to how instal
recovery.
https://www.androidfilehost.com/?fid=24727376692773052
full rom
https://www.androidfilehost.com/?fid=24727369092694607
Click to expand...
Click to collapse
ghertas said:
ftabashir said:
cm-13.1.2
instal via ADB Fastboot
youtube help you to how instal
recovery.
https://www.androidfilehost.com/?fid=24727376692773052
full rom
https://www.androidfilehost.com/?fid=24727369092694607
Click to expand...
Click to collapse
Thanks. but I downloaded recovery from this link.
Then i tried to run "fastboot flash recovery cm-13.1.2-ZNH2KAS3NA-kipper-boot-debuggable-6c1a30b194.img"
but it said:
OEM locked device can't boot unsigned image. Do you want to continue?
Yes
No
I pressed no and it said:
target reported max download size of 268435456 bytes
sending 'recovery' (20866 KB)...
OKAY [ 0.791s]
writing 'recovery'...
FAILED (remote: Image could brick the device. Flashing canceled.)
finished. total time: 2.129s
I ran the command again and this time I chose Yes and it said:
target reported max download size of 268435456 bytes
sending 'recovery' (20866 KB)...
OKAY [ 0.783s]
writing 'recovery'...
OKAY [ 16.962s]
finished. total time: 17.751s
but as it said, when i try to boot recovery i saw this message: OEM locked device can't boot unsigned image. oem unlock or flash signed boot image.
I need a signed recovery, but i couldn't find such recovery anywher. Please help me
Also when i try to run fastboot oem unlock it says that: FAILED (remote: oem unlock is not allowed)
So the only solution would be installing a signed recovery.
Note: 3day ago i installed a custom recovery without oem unlock. now my device stops at boot animation and i cant boot into android. also i can't boot into recovery because oem is locked and recovery is not signed. I need a signed recovery.
Click to expand...
Click to collapse
miSAKe said:
I managed to soft brick my Storm with one of the CM13 updates (both normal boot and recovery just resulted in a black flickering screen), it seems others are having similar issues so here are instructions for restoring your phone to the stock image, this fixed the brick for me.
You need fastboot so download and install the Android SDK if not already present: http://developer.android.com/sdk/installing/index.html
Download and uncompress the stock Cyanogen OS fastboot zip: https://cyngn.com/support
Boot your phone into fastboot mode, (plug in USB then hold down vol+ and power until rebooted, keep holding vol+ until in fastboot)
Start a shell/command prompt on your computer to execute the commands below.
THIS WILL WIPE EVERYTHING!!! - THIS IS A COMPLETE STOCK RESTORATION!!!
Execute these fastboot commands from within the extracted stock zip directory:
Code:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot erase DDR
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash tzbak tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash hypbak hyp.mbn
fastboot flash rpm rpm.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot erase splash
fastboot flash splash splash.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
If the cache command gives an error try continuing anyway.
If you want to try to save your user data skip the userdata command, but no guarantees.
Search the other threads on XDA for instructions on booting or flashing custom recoveries, ROMs, root etc.
Click to expand...
Click to collapse
How did you enter fastboot without enabling usb debugging/developer option?
I have Asus Zenfone Selfie ZD551KL
I flashed ZenUi pre-rooted ROM and now after I flash other ROMs
(including Lollipop ZenUI) phone reboots as soon as boot finishes and loops.
I tried Restoring an old TWRP backup from when I used Resurrection Remix M, didn't work
I got ZenUI WW_21.40.0.1692 from www.asus-zenfone.com
Commands I used to flash ZenUi Android 6.0.1
Code:
fastboot erase userdata
fastboot erase system
fastboot flash aboot aboot.mbn
fastboot flash boot boot.img
fastboot flash hyp hyp.mbn
fastboot flash modem modem.bin
fastboot flash recovery recovery.img
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash tz tz.mbn
fastboot flash system system.img
also I found that
Code:
fastboot oem reboot-recovery
command doesn't work any more.
How can I fix this?
Hello how to fixed step by step
First you need fastboot rom extract fastboot rom on your pc after extract find 3 file
1-boot
2-recovery
3-system
Flash with fastboot
Turn off your phone and going to fastboot
Type
Fastboot devices
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Done device can't boot but you can install twrp China version link ?
https://www.lanzous.com/i6ahykh
after installation you can go to twrp
Download fastboot miui 10 install from twrp
Sorry for me English