First of all, I'm not the responsable for none of this great development work and I'll try to link every step to the source where I found each one and credit it to the right person.
I thought was important to post it here because, thanks to the Samsung, the Galaxy Note 10.1 have too many different device specs under the same product name and the internet is crowded with wrong tutorials or misleads.
If I said something wrong in this post, feel free to correct me or delete it if necessary.
The user Skyjumper at android-hilfe.de forum shared his experience testing an unofficial version of LineageOS 14.1 for GT-N8000 (2012) in GT-N8020 (2013). He also linked two XDA permalinks for comments with links to [1] TWRP 3.0.2 (by Aramir_, at here) and [2] LineageOS 14.1 unofficial (by lirokoa, at here). Then you have just to download the openGAPPS (I would suggest pico version), the Odin3 and the LineageOS add-on for SU (optional for who want SU access).
DOWNLOAD FILES
I uploaded every file for this tutorial to Google Drive because most of the websites have low speed traffic control, but feel free to download from where you want.
Odin3 v3.13.1 [xda] [gdrive]
Samsung Stock Rom [gdrive]
TWRP 3.0.2 [xda] [gdrive]
LineageOS 14.1 Unofficial [xda] [gdrive] - copy this file to your SDcard to be accessed by TWRP
LineageOS Add-on for Super User [lineageos] [gdrive] - copy this file to your SDcard to be accessed by TWRP
GAPPS [open GAPPS] [gdrive - pico] - copy this file to your SDcard to be accessed by TWRP
STEP 0 - go back to stock ROM throught Odin (just to be sure) *OPTIONAL
Activate the Developer Mode by tapping seven times the VERSION NUMBER ate ABOUT TABLET menu;
Activate the USB Debug at the development menu;
Restart the tablet in Download Mode (power button + volume down);
Open Odin and plug usb from tablet to computer, then select the stock ROM file (you have to extract the RAR file and use the *.tar.md5 file) and click start.
STEP 1 - install the custom recovery TWRP 3.0.2 throught Odin
Activate the Developer Mode by tapping seven times the VERSION NUMBER ate ABOUT TABLET menu;
Activate the USB Debug at the development menu;
Restart the tablet in Download Mode (power button + volume down);
Open Odin and plug usb from tablet to computer, then select the TWRP tar file and click start; at this point, the device will reboot and you have to be fast and hold power button + volume up to boot in recovery mode (if the system reboot, it will replace the custom recovery back to the default one and you will have to install the TWRP again with Odin.
STEP 2 - install the LineageOS and others tools throught the new TWRP - (only reboot at the end of the entire step)
In the TWRP, click WIPE, then ADVANCED WIPE and select CACHE and SYSTEM and wipe it, then click to FORMAT DATA to format it too;
Back to main screen, click INSTALL, select the SDcard storage and navigates until the LineageOS 14.1 zip file and swipe to instal;
Go back and click INSTALL again, and select the Google Apps file and swipe to install;
*OPTIONAL - Go again to INSTALL and select the the LineageOS add-on for Super User;
Reboot the system and do the initial configuration.
Know issues
The default device name at bluetooth configuration becomes GT-N8000, and you may want to change it back to GT-N8020 or any other you want;
The virtual keyboard starts hidden by default, then, at the initial configuration, when you will type your wifi password, you will have to activate the virtual keyboard visibility in the right bottom corner;
The configuration or MPT apps may stop working at the boot time, but just click the option to close and it will restart;
All the build mention at /system/build.prop is now N8000. I tried to edit the file to fit the real spes, but, to be honest, I don't really know what this really means, but still works properly to me.
Unknow issues
I couldn't test the SIM card usages and bluetooth yet. I'll try to edit this post when possible.
Additional steps
To activate the Super User, activate the Developer Mode (same as steps 0 or 1) then activate it at the Development menu;
The pico version of Google Apps installs only the necessary to run the Google Play app, now you may want to install the rest of essential google apps that you use.
Confused by title .
This is a Lineage 14.1 for N8020 ?
JJEgan said:
Confused by title .
This is a Lineage 14.1 for N8020 ?
Click to expand...
Click to collapse
Yes, sir. Sorry the confusion.
I was looking for it, thanks!
Any solution for fix Bluetooth?
Inviato dal mio Redmi Note 5 utilizzando Tapatalk
Has anyone installed and can give more information about the operation? Did you use SIM mobile internet?
not for n8020
doiiido said:
I was looking for it, thanks!
Click to expand...
Click to collapse
Tested here, works all ok but the sim card, it is not even recognizing, came from stock n8020 rom.
I'll try to flash an n8000 rom and see if it makes any diff.
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
doiiido said:
Tested here, works all ok but the sim card, it is not even recognizing, came from stock n8020 rom.
I'll try to flash an n8000 rom and see if it makes any diff.
Click to expand...
Click to collapse
To flash it I had to modyfy the install script and take off the first assert line, because its target is n8000 and not n8020.
what changes did u make from the original lineageos 14.1 20170810 version?
Best Regards, Lincoln.
Has somebody else already tested this adaption for a N8020?
Atlante2004 said:
Has somebody already tested this adaption in a N8020?
Click to expand...
Click to collapse
READ the thread .
Someone else, I meant
installed on my n8020. Confirm not working Bluetooth and Sim
Bluetooth is a known Lineage problem.
Sim can be modem .
JJEgan said:
Bluetooth is a known Lineage problem.
Sim can be modem .
Click to expand...
Click to collapse
sim with official sasmung rom 4.4.2 Work 100%
With lineage 14.1 No Work
Yes..two different roms.
One samsung one not samsung.
Suggest you to read OP before flashing a rom.
As said change modem and CSC.
JJEgan said:
Yes..two different roms.
One samsung one not samsung.
Suggest you to read OP before flashing a rom.
As said change modem and CSC.
Click to expand...
Click to collapse
I know it's two different ROMs.
However it works very well. We hope the Lineage will release an official version for the GT N8020
Fastjoy said:
I know it's two different ROMs.
However it works very well. We hope the Lineage will release an official version for the GT N8020
Click to expand...
Click to collapse
LineageOS isn't going to release it. There is maintainers for each device, and if someone wants to do so for the Galaxy Note 10.1, they can do so. There is hundreds of maintainers.
secretwolf98 said:
LineageOS isn't going to release it. There is maintainers for each device, and if someone wants to do so for the Galaxy Note 10.1, they can do so. There is hundreds of maintainers.
Click to expand...
Click to collapse
Galaxy Note 10.1 2014 or Galaxy Note 10.1 2012 (gt n8020) ?
This is 2012 version forum
How do you unlock the bootloader?
Fastjoy said:
Galaxy Note 10.1 2014 or Galaxy Note 10.1 2012 (gt n8020) ?
Click to expand...
Click to collapse
2012. The 2014 is already supported. Don't attempt to install it, it has different hardware and specs.
Related
WELCOME TO
SAMSUNG GALAXY S3 mini VE
THREAD
Informations about VE
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
CPU Marvell PXA986 / ARM Cortex-A9
GPU Vivante GC1000
chipset is a marvel pxa 986/pxa988 chip set
opensource code HERE
PETITIONS
BECAUSE I8200 IS A DIFFERNT MODEL FROM ORIGINAL S3 mini DOESNT EXIST MANY DEVS OR SOURCE.HERE IT IS SOME PETITIONS TO MOVAFUSION AND OTHER TO HELP AND SUPPORT US
PETITION 1 - PLEASE Click on it and sign.
PETITION 2 - PLEASE Click on it and sign.
ROOT-KERNELS-ROMS-RECOVERY-MODS & UNBRICK
BEFORE START..READ ALL CAREFULLY.IF YOU DONT UNDERSTAND DONT DO IT !!!
Samsung SIII mini Ve i8200/N/L/Q is not same with i8190/N/L
DONT TRY ANYTHING FROM I8190
ROOT METHODS
1. Vroot http://vrootdownload.info/
Instructions
1. Download the rooting application. (This app can root many other devices)
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called ???? 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by ???? 1.0.4, choose ??(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze ???? 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and ???? 1.0.4 will not be there anymore.
2. Kingo root http://www.kingoapp.com/
Instructions:
Just run the app
3. Flash SuperSU
install a custom recovery and flash the zip
HERE the link
RECOVERY
TWRP recovery (SAFE)
Link here
Link Attention with TWRP-Recovery. Data-Partition restore seems to be not right. At the moment please did not use it, because it can delete your data-partition. We have to investigate it further! Other partitions seems to be ok, but its a good Idea if you copy your important data also manually to a other storage (like PC) while you trying things of this thread.[/COLOR]
Philz Touch Recovery (safe)
Link [URL="https://www.dropbox.com/s/cviev1st9d3331z/PhilzTouch_recovery.tar.md5.zip?dl=0"]Here
Infos for Philz recovery:
Philz-Recovery seems to work fine for the Backup/Restore functions and also some zip-installations (be aware that not every zip is compatible with i8200!) .No workin boot image backup
Warning about the recovery:
Nevertheless, it is absolutely recommended to go to recovery ONLY WITH THE THREE BUTTON METHOD !!! To try it with the software/adb/startmenü "Reboot to recovery" will produce at the moment a bootloop, which can produce a "not easy to solve Softbrick". The three-Button-Method is safe!
Installation Guide for recoveries:
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the recovery file mda file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
*NOW Take a backup before continue
KERNELS:
Baroni kernel (beta)
==>KERNEL THREAD<==
ROMS:
ALL IS STOCK BASED ROMS
NO CM AOSP OR OTHER CUSTOM ROMS
1 First Custom ROM for S3 Mini Value Edition [TEST BUILD][NO WARRANTY]
NOT SAFE YET
HERE
FOR THOSE WHO DOWNLOADED ROM
HERE
2. [ROM] [STOCK] Deodex ROM for goldenvess-3gxx
[ROM] [STOCK] Deodex ROM for goldenvess-3gxx
3. [ROM][STOCK] aosp themed Rom for S3 mini VE
the link
4.[VE][ROM][STOCK]GoldenS5 Style for S3 mini VE
HERE thanks to
@Leandro Lopes (LL)
@Rodney -eu kk- (RDY)
@PaulRichter
5.[VE][ROM][4.3] for Samsung Galaxy S3 mini VE
the link
MODS:
DeOdex Stock APPs:
The Thread
Tweaks for stock firmware:
http://forum.xda-developers.com/galaxy-s3-mini/general/guide-i8200-perfomance-battery-tweaks-t2889289
Center clock and Battery percentage:
Use Xposed Instaler & Gravity box
* I am not responsible for bricked devices, dead SD cards
*If you are unsure about what you do or do not know
how to revive your mobile not do anything not from the below
* Me or the other members not our responsibility
if you destroy your mobile
UNBRICK METHOD:
You can find firmwares for i8200/N at http://www.sammobile.com/firmwares/ (Just search your model. Be careful with i8200 and I8200N maybe soft brick if install wrong!!!)
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thanks to:
@greeneyes2910 for the recovery philz
@SolarPlexus for kernel and twrp recovery
@t-shock for this tweaks
@JynAlek for this helpness and the testing and beta test rom
@drumandbassfreak for [STOCK] Deodex ROM
@PaulRichter for the stock themed rom
Our phone will never asee how is to have a custom rom -_-
I rooted my GT-I8200L using Kingo Android Root and I still working on a port of CWM. Until now, no sucess... My english is poor, I'm brazilian!
Sent from my GT-I8200L using XDA Premium 4 mobile app
i hope to suceed to make a port
maybe someone will notice us and develop CM11
Does a new development custom rom ??
KwstPap said:
Hi !!!
Because no where doesnt exist a thread about Samsung s3 mini I8200/N aka VE I decided to make one!!!
A few people may have thiw specific model o s3 mini so there are no many tutorials roms cwm etc!!!
Here we will write anything we know about this smartphone.any question or anything else!!!
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
[COLOR="Red"]ROOT[/COLOR] thanks to DanielCarbajal96 for tutorial
http://forum.xda-developers.com/showthread.php?t=2725346
ONLY WITH VROOT 1.7.6 no other apps can root s3 mini ve!!!
FIRMWARES
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
you will find the new firmwares on http://www.sammobile.com/firmwares/ (just search your model.be carefull with i8200 and I8200N maybe soft brick if install wrong!!!)
UnBrick
download a ofixiall firmware and and install it with the Odin
ROM & Recovery Mod
Not yet .maybe in future with someone make it!!!
Some Extras
Make it lighter!!1
delete Bloatware (delete useless sustem apps)
like
Not needed/redundant STOCK apps safely deleted with Titanium BackUp:
1. Chat On (Personally I use WhatsApp)
2. Chrome (I prefer Dolphin Browser)
3. E Mail (I keep G Mail instead)
4. Game Hub (Play Store is enough for me)
5. Google + (I use FaceBook only)
6. Help (Read XDA instead!!!)
7. Internet (Dolphin!!!)
8. Messenger (WhatsApp)
9. Play Movies (I don´t see movies in my phone)
10. Play Books (Same)
11. S Suggest (Google Play)
12. S Voice (Keep Voice Search of Google Now)
13. Samsung Apps (Google Play)
14. Talk (WhatsApp again)
15. Video Hub (Same as Play Movies)
16. Video Player (I choose MX Player)
Suggestions are accepted, of course.
Don´t forget 3 little things:
-Do a full BackUp first at all!!!
-Freeze the App before deleting it. And if it all keep working delete safely
-Clean up Dalvik cache
UPDATE: Also dafe to remove:
1. User manual
2. Yahoo Finances
3. Yahoo News
4. Live Wallpapers
thanks aavvaallooss
Center clock and % battery status bar
Samsung forgot to put a option about % battery on statusbar
We can put it witn Xposed framework and gravitybox
http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401 thanks rovo89
I HOPE SOMEONE SOMEWHERE MAKE A CWM AND ROM FOR THIS MODEL !!!
HAVE A NICE DAY!!!
Click to expand...
Click to collapse
Hey
I'm looking for a scatter loading file i8200L VE , can you help me ?
Anyone know if someone is working on a kooked room-recovery for i8200?
Is there a timeline?
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
georgedk said:
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
Click to expand...
Click to collapse
That's why they need donation for new custom roms. They need to buy the specific device, so they can work with it
So we need to gather a donation and say what we want
Do we have any hope now? :victory:
Well let's hope so, I'm sick and tired of having to put up with the stock ROM. I have more problems with it than a custom ROM for God's sake.
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
VallNAr said:
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
Click to expand...
Click to collapse
Our phones with the same features. Maybe Samsung publications, maybe someone will adapt
The Samsung source code i8200n
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=i8200n
there all all sources for all devices,not only i8200N... anyway..maybe will have an official upgrade since ATT made possible KitKat
Come on .A Dev to port something.there are a lot people want a Cwm or a rom
I think us developers doesn't take it seriously
hazar1907 said:
I think us developers doesn't take it seriously
Click to expand...
Click to collapse
We must show them that we are lot of people want a recovery or a rom or port some of them
any news about the recovery
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
25/03/15 Updated
Switched to nvertigo67 current-12.0 kernel
Fixed Kodi/XBMC touch issue
Changed from google to samsung MTP driver.
21/03/15 Update, fixed Phone call audio only coming through left speaker
20/03/15 Update, fixed Dialer crash.
19/03/15 Updated, fixed a few issues.
Power off charging is now working
Reboot recovery is working, I did have to edit the java code to make this work, seems a recent change in CM caused this, possibly a bug in cm?
Wifi hotspot fixed.
Added f2fs support to kernel, recovery also updated, have not fully tested changing filesystem to f2fs. Edit. Seems like it will require a special built rom and recovery to work, I will look at this when I start running out of bugs to fix
Many other minor fixes.
Not Working:
In call audio only coming through left speaker
Dialer app chashing on making or receiving a call
Power off charging, boots into recovery.
Advanced reboot menu, wont reboot into recovery, though adb reboot recovery works. Not sure whats going on here.
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
I find this tablet is so much better with this ROM , like many I hate Samsung's TouchWiz. Everything is so much smoother and responsive now.
To Install:
Flash TWRP Recovery First with odin, Follow this Cf-Autoroot guide and substitute CF-Auto-Root.tar with my recovery TWRP_SM-T805.tar downloaded from my google drive.
Once recovery is installed transfer the CM11 rom zip to your internal sdcard, also grab GAPPS http://wiki.cyanogenmod.org/w/Google_Apps and have that on your SD card also,
Optional grab supersu also.
Boot into recovery by powering off and holding down home, volume up and power till recovery starts.
Once in TWRP Recovery pick Install, choose the rom and gapps to install at the same time. Flash
After install finished we need to do a wipe, so go back to the main screen and choose wipe.
Reboot, Good luck.
I don't have a lot of time to answer questions, I will do my best to check back regularly.
Here is my github, It is upto date with my builds now. https://github.com/Andrewt12 )
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
cm-11-20150323-UNOFFICIAL-chagalllte.zip
cm-11-20150323-UNOFFICIAL-chagalllte.zip.md5
TWRP
https://drive.google.com/file/d/0B9JsCrp0SHzbekdGYV9mcks5bWs/view?usp=sharing
Deleted
Deleted
awesome Ive been waiting for something like this..
How bout t705? ?
all things are good in this rom can anyone verify this please
Cant install it can someone tell me steps on installinh it please
andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.
nvertigo67 said:
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.
Click to expand...
Click to collapse
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse
Congrats. Getting voice and data working is a great job! For klimtlte: chagallwifi and klimtwifi differ subtile, but they DIFFER (i.e. sound, capacitive keys). If you really want to try klimtlte too, you should have a look at @eousphoros gits.
.... very good. Waiting to put new version on my T-805..
Thanks a lot!
andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api
any1 installed the rom yet if so please show steps on installing it please
meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My
Click to expand...
Click to collapse
You come from a Wifi-only rom, s.a CM-12?
Your tablet is defined as a wifi. You can edit the package script in the zip to remove the control
Skickat från min SM-T805 via Tapatalk
I have tested a wifi only cm11 package, yes. It runs on my Tab very good without 3G option... Wifi only. Iam happy it comes an CM11 for T805. OK wich files must editiding to removed the control? I will tested it
andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
This is what weve all been waiting for!!! The modem working as well would be such a bonus , just wow!
meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api
Click to expand...
Click to collapse
Hi meexx, You will need to use my twrp, different partition size than chagallwifi, thats also why it throws an error, as you installed chagallwifi twrp and it is looking for the wifi rom.
Just hold off for now though, my latest has many fixes to what I posted. I will hopefully upload later today, got to finish my chores first otherwise I will be in trouble with the wife for spending too much time on the computer.
Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work
meexx said:
Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work
Click to expand...
Click to collapse
Its in my google drive.
https://drive.google.com/file/d/0B9JsCrp0SHzbeTdjTDhDUUVDa00/view?usp=sharing
Doing a fresh build now.
Updated build in first post.
I had the same problem but just deleted the first three lines of text in the updater-script file. Only problem I got now is that titanium backup can't see my external SD card
[Guide] Multi Boot Note 5
I am using this on SM-N920C of the Note 5; I believe this will work with other Note 5 Variants as well. Sprint variant already confirmed. Others who have different variants which are not tested can try this and update us, and we will be here to help you out if you are ready to try this out.
@chenxiaolong is the one who made this happen to our beloved Note 5
Main advantage of this is you can try any new rom with out loosing or having any kind of trouble with your existing rom. This mod will not change anything in your primary rom, so any time you can go back to your normal state.
Disclaimer
1.I am not responsible for bricked devices, dead SD cards,etc.
2.Before going further! YOU are choosing to make these modifications.
supported Devices: ( Tested and confirmed working)
SM-N920C : noblelte (Tested by me )
SM-N900P (Sprint): nobleltespr (Tested )
Requirements
* Read the full guide before Starting.
* Backup your phone if you are doing this first time. (Full Nandroid backup recommended for the new comers and it’s also recommended to others who don’t know what they are doing exactly even if they have multi booted several times)
* Rooted Note 5 with custom recovery (preferred TWRP or philz).
* free space in your internal SD (for example a TW rom could take up to 6.5GB )
* If you face any trouble please read the FAQ before doing something or asking for help. And if you want help please provide as much as details(device, roms, etc.) you can.
*
Instruction:
1.Download your desired Rom which you want to use for multi booting and the mods, addons, Kernel etc for the same. Keep the files in your internal memory.
2. Download the most recent snapshot release of Dual Boot Patcher and install it on your Note 5.
3. Open Dual Boot Patcher and grant SU permission. Then go to ROMS and you will see your Primary rom, press the 3dotmenu key and click "set kernel".
4. Then In Dual Boot Patcher go to Patch Zip File and Choose nobleltespr - samsung galaxy note 5 from the device drop down menu.
5. In the Partition configuration drop down menu select "Data Slot".
6. Below that you have to enter the ID of the secondary rom.(Example 1, 2, 3, etc. - it will take it as /data/multiboot/data-slot-1)
7.Now tap on the below button to choose the ROM's, Kernel and mods to patch them and make them perfect for Multi booting.
8. Always remember to keep same slot ID for the kernels and mods same as the rom. (Example: if you want to flash the kernel to the data-slot-1 rom then you have to select the same ID that’s 1 or if you want to flash the kernel to the data-slot-2 rom then you have to select the same ID that’s 2.)
9. Now press the tap to begin patching button to patch the file. And you will get a new patched zip file in the same location.
10. patch the kernel also for your rom with same id because most if the roms comes with out kernel so we have to patch the kernel and flash it along with the rom.
11. Now Boot into custom recovery and flash the new patched rom followed by the patched kernel without wiping anything and reboot.
12. And your device will boot into New Rom.
13.Install the Dual Boot Patcher app and set the kernel for your second ROM as well.
14. To switch between roms
•Open Dual Boot Patcher app/roms and click on primary or secondary rom as you like and reboot.
* Important things to keep in mind: while installing a rom or mod with Aroma installer don't reboot directly from the aroma.
You have to always uncheck the last option to reboot in aroma and click finish. So it can finish the final steps for multi booting.
And if you miss that it will only reboot to recovery. To boot back you have to flash your primary rom kernel or re-flash the patched rom.
Never update a secondary rom through OTA Update.
Revert
To revert back or if you face any problem just flash my Multi Boot cleaner.zip which will wipe all the installation files from \system and restore the primary rom kernel.
As a backup keep a copy of your kernel flashable zip file.
FAQ
1. App sharing?
Ans. Will be added shortly.
3. This rom can’t be patched.
Ans. some roms are not supported its known, if the Dev have time may be he will consider including them.
4. I am getting error while using the dual boot app.
Ans. http://forum.xda-developers.com/showpost.php?p=67198156&postcount=120
Add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different from the above mentioned then add your product name instead of "noblelte"
if you don't know how to add this make a request with your product name, so i will make a flashable zip for that.
Click to expand...
Click to collapse
Credits/ Thanks:
@chenxiaolong
Original Thread: http://forum.xda-developers.com/showpost.php?p=45659284
Don't forget to thank him and if you can please consider a small donation for him because he really deserve it.
@aukhan & Team Emotroid
His Thread (Where I got the idea and help to make this guide): http://forum.xda-developers.com/note-4/general/dual-boot-n910f-snap-dragon-variant-t3065211
@rlorange for the help and support.
His thread for Dual boot backup and restore app. http://forum.xda-developers.com/showthread.php?t=2491299, http://forum.xda-developers.com/not...-4-15-multi-boot-backup-restore-v1-0-t3087187
@AholicCert for helping me with some scripts
@ other XDAmembers
My Note 3 multi boot guide: http://forum.xda-developers.com/galaxy-note-3/themes-apps/guide-dual-boot-note-3-t3091764/post60326851#post60326851
Good work man ... easy for testing ...
Thanks for creating this thread! I just got myself an S6 Edge+, so expect top-notch support for these new Galaxy devices
chenxiaolong said:
Thanks for creating this thread! I just got myself an S6 Edge+, so expect top-notch support for these new Galaxy devices
Click to expand...
Click to collapse
Thanks a lot dev. We really appreciate your help and we love your work very much.
On the tmobile note 5 I get this when trying step 2, seeing the kernel first the primary.
fireguy0306 said:
On the tmobile note 5 I get this when trying step 2, seeing the kernel first the primary.
Click to expand...
Click to collapse
add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different add your product name instead of "noblelte"
i believe it will be ro.patcher.device=nobleltetmo
Multiboot cleaner fixed
Everyone please re-download the multiboot cleaner
kernel flashing fixed.
Could it work on my s6 edge 925F with a note5 rom? I'd really like to dual boot my phone!
Thanks for your work and sorry for the noob question!
Woeking on a Version for Samsung Galaxy S6 (G920F)?
Great work btw!
So adding that line to my build.prop allows me to multiboot two COJ5 ROMs just fine.
For fun i tried running the MM ROM as a primary and booting a COJ5 as a secondary, it doesn't work. The COJ5 ROM sits in a semi-bootloop it either sits at the Samsung boot animation or the "Starting Apps" . Now i stopped it after ~20 minutes, i figured it was dead at that point.
Either way Multiboot def works nicely on the SM-N920T
gdr_01 said:
Could it work on my s6 edge 925F with a note5 rom? I'd really like to dual boot my phone!
Thanks for your work and sorry for the noob question!
Click to expand...
Click to collapse
Check the screen shot for supported device's. With a note 5 rom I'm not sure. But with a note 5 port sure you can and the procedure will be almost same.
can you port it to s6?
Good work man ... easy for testing
bhavstech said:
can you port it to s6?
Click to expand...
Click to collapse
It will work with s6 also. You can follow the same instructions.
In the device drop down you have to select s6 flat/edge.
And the rest is same as note 5 guide.
if there is more requests, i can make a guide for s6 as well. for that i need a tester to confirm its working. i know its already working. but just in case. also as long as the moderators allows i will give support for that thread.
54NJ41 said:
add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different add your product name instead of "noblelte"
i believe it will be ro.patcher.device=nobleltetmo
Click to expand...
Click to collapse
How do I change it??
dallen5 said:
How do I change it??
Click to expand...
Click to collapse
You need a root file Explorer app. I like ES File Explorer.
Then go to /system/build.prop and add that line to the bottom of the file.
fireguy0306 said:
You need a root file Explorer app. I like ES File Explorer.
Then go to /system/build.prop and add that line to the bottom of the file.
Click to expand...
Click to collapse
I can't even find the app in explorer
dallen5 said:
I can't even find the app in explorer
Click to expand...
Click to collapse
give me your device name i will make a flash able zip for you.
54NJ41 said:
give me your device name i will make a flash able zip for you.
Click to expand...
Click to collapse
n920T
dallen5 said:
n920T
Click to expand...
Click to collapse
here you go, just flash it in the recovery. and give me your feedback.
Guys, I'm making this thread for those people who are using Sprint's Note 4 (N910P) outside of US and are stuck with Sprint's ROM (or the ROMs that are based on it) and have certain issues in using the ROM.
For instance, I'm using the unlocked variant of N910P with a GSM carrier, so I was having problem in connecting to the Hot-Spot feature as all of my devices were stuck at "Obtaining IP Address" loop and eventually would never connect.
I did try various "hacks" present here on XDA for enabling Hot-Spot feature like using Galaxy Tools, using SQLite Editor, etc but wasn't able to overcome the problem.
Since, XDA is a great platform for sharing solutions to various problems, I decided to create a thread especially for those who don't want Sprint's bloatware but want to stick with "Stock ROM features" like S Pen.
Hence, here's the step-by-step guide for installing other carrier's ROM on N910P:
Before attempting all this,make sure to be on OK1 Bootloader & Baseband (Do not try this on Marshmallow Bootloaders) for N910P.
Step 1:
Install TWRP recovery version 3.0.1 (Yes, you read it right..it's 3.0.1 & not 3.0.2)
Once you have downloaded, flash it through ODIN (the TAR file) or through existing TWRP (using ISO image).
Step 2:
Make a backup of your current ROM so that you can revert to it in case of unsuccessful flash.
Step 3:
Go to Wipe (in TWRP)-----> Factory reset (do this 3 times.....yes, 3 times!)
Then, go to Advanced Wipe & wipe Dalvik/ART cache,Cache,Data,Internal Storage, System (Do not wipe external SD Card).
Hit the back button to come out of the "wipe window"
Step 4:
Click on "Install" and choose the files in following order:
a) Dr Ketan's ROM
b) Data Fix for the ROM
c) Kernel
d) SuperSU (I used beta 2.71)
Once the flashing process is finished, reboot the system and wait for the phone to boot.
It will take a long time (around 10-15 minutes) to boot.
Once you are on setup wizard screen, choose to apply "Dr Ketan's fix" and then you can proceed like you do in any other ROM.
Downloads:
TWRP: https://dl.twrp.me/trltecan/
(Choose TAR or ISO as per your choice and flash accordingly)
ROM:
http://www.drketanrom.com/n910g.html
(All credit goes to Dr Ketan for his hard work & awesome ROM)
(Its for G variant)
Data FIX:
https://drive.google.com/folderview?id=0B1I0vyV3onrjemR2YlY2V0s0ME0&usp=sharing
(Credit goes to @dr.ketan, & @Lanc-City for providing all the required info)
Kernel:
http://d-h.st/rb3d
(The credit for this Kernel goes to @Hani K.)
Super SU:
http://forum.xda-developers.com/showthread.php?t=1538053
(Credit goes to @Chainfire)
Note: I am in no way to be credited for all this as the links provided above are a result of hard work from the respective developers. I have just compiled all the links into one thread so that it can help anyone like me to switch to other ROM.
Also, neither I nor any of the above mentioned developers/members are responsible for any fault that may arise due to improper flash or other reasons..
Do all of it at your own risk!
Last but not the least, I would like to thank @ricohz for helping me out when I was stuck in some steps..
(In the screen-shot attached, the model number is 920T for obvious reasons...so don't ask why it's not 910P..)
Do note that the APNs have to be edited manually, else the data connectivity would not be there!
(This thread should benefit the non-Sprint users........)
Update:
There are some more ROMs that can be flashed successfully on N910P such as:
1. Maximum Overdrive
http://forum.xda-developers.com/note-4-tmobile/development/s7-portn910t-n910w8-t3375956
2. Nameless ROM
http://forum.xda-developers.com/note-4/snapdragon-dev/rom-nameless-mm-lightfastdeodexed-t3363547
Kindly say Thanks to the developers on their respective threads for all their hard work.
Thanks for sharing im gonna give it a shot
But why did you say to be on ok1 if you have marshmallow version in the screen shot
Sent from my Not4 Mod using Tapatalk
NICE
SPRINT USERS IF YOU FLASH THIS TEXT WON'T GO OUT
MMS ARE FINE TEXT COME IN BUT WON'T GO OUT
this works for him because he's using a gsm sim card
Google Drive link is broken
Sent from my SM-N910P using Tapatalk
Data fix and Kernel fix link broken...
Anybody get text going I'd be happy too pay bounty
Jedi Aaris said:
Thanks for sharing im gonna give it a shot
But why did you say to be on ok1 if you have marshmallow version in the screen shot
Sent from my Not4 Mod using Tapatalk
Click to expand...
Click to collapse
OK1 bootloader has been suggested so as to avoid any incompatibility issues for the ROM!
Shiva758 said:
Data fix and Kernel fix link broken...
Click to expand...
Click to collapse
Links have been updated!
ricohz said:
NICE
SPRINT USERS IF YOU GLASH THIS TEXT WONT GO OUT MMS ARE FINE TEXT COME IN BUT DON'T GO OUT
thus works for him because he's using a gsm sim card
Click to expand...
Click to collapse
@ricohz: Yes,buddy...
For GSM carriers, this method works flawlessly..
Kudos to you for helping me out!
bddpolo said:
Anybody get text going I'd be happy too pay bounty
Click to expand...
Click to collapse
Some one said bounty?
Lol jk
I got boot loops what I do now right now I am on ok1 !!!!what mistake i did? Is that ROM marshmallw? May be I downloaded that one ? Which kernel we have to use ? When I go to download section it shows me three kernel variants ?
---------- Post added at 11:37 AM ---------- Previous post was at 11:33 AM ----------
Do we have to download n910pb6 mm firmware ?
I just messed my 4 hours on this ROM but every time I qm getting bootloops...I am on lollipop ok1 firmware and bootloader .I tried everything bit nothing works ..or may be its not complete clear what I download ?
Shiva758 said:
I just messed my 4 hours on this ROM but every time I qm getting bootloops...I am on lollipop ok1 firmware and bootloader .I tried everything bit nothing works ..or may be its not complete clear what I download ?
Click to expand...
Click to collapse
Tinkering and flashing custom ROMs on Android is not always a piece of cake...
Loads of patience is required and if the process is not carried out as stated/expected, time is bound to get wasted.
Anyway, here's what you need to do (Or at-least, expected to do..):
1. Take a backup of the current ROM.
2. Do Factory reset 3 times ( First time, do it again & do it yet again..making it three times)
3. Wipe everything(except External SD Card) again 3 times as above.
4. Flash the ROM.
5.Once ROM is flashed, do not reboot & flash the Data Fix.
6.Again, do not reboot and flash the Vitamin Kernel (originally meant for F variant).
7. Do not reboot yet again & flash the SuperSU (I FLASHED 2.71).
Now, reboot and wait for the setup screen to appear. It will take quite a long time to appear and the phgone will be stuck on Samsung logo for quite a while.
Now, if you have patience, wait for the process to finish, and if not, you know what to do..
Shiva758 said:
I got boot loops what I do now right now I am on ok1 !!!!what mistake i did? Is that ROM marshmallw? May be I downloaded that one ? Which kernel we have to use ? When I go to download section it shows me three kernel variants ?
---------- Post added at 11:37 AM ---------- Previous post was at 11:33 AM ----------
Do we have to download n910pb6 mm firmware ?
Click to expand...
Click to collapse
The direct link for the ROM is:
http://d-h.st/m9bj
The direct link for the kernel is:
https://www.androidfilehost.com/?w=files&flid=54698
Hope, this much of help will make things clear for you.
Finally it worked . Actually i am doing ( kernel) mistake .Thanks for providing direct links and for your kind help.
robinhood1808 said:
Guys, I'm making this thread for those people who are using Sprint's Note 4 (N910P) outside of US and are stuck with Sprint's ROM (or the ROMs that are based on it) and have certain issues in using the ROM.
For instance, I'm using the unlocked variant of N910P with a GSM carrier, so I was having problem in connecting to the Hot-Spot feature as all of my devices were stuck at "Obtaining IP Address" loop and eventually would never connect.
I did try various "hacks" present here on XDA for enabling Hot-Spot feature like using Galaxy Tools, using SQLite Editor, etc but wasn't able to overcome the problem.
Since, XDA is a great platform for sharing solutions to various problems, I decided to create a thread especially for those who don't want Sprint's bloatware but want to stick with "Stock ROM features" like S Pen.
Hence, here's the step-by-step guide for installing other carrier's ROM on N910P:
Before attempting all this,make sure to be on OK1 Bootloader & Baseband for N910P.
Step 1:
Install TWRP recovery version 3.0.1 (Yes, you read it right..it's 3.0.1 & not 3.0.2)
The reason for choosing 3.0.1 is that the ROM successfully booted using this version instead of 3.0.2 (Don't ask me the reason for it..)
Once you have downloaded, flash it through ODIN (the TAR file) or through existing TWRP (using ISO image).
Step 2:
Make a backup of your current ROM so that you can revert to it in case of unsuccessful flash.
Step 3:
Go to Wipe (in TWRP)-----> Factory reset (do this 3 times.....yes, 3 times!)
Then, go to Advanced Wipe & wipe Dalvik/ART cache,Cache,Data,Internal Storage, System (Do not wipe external SD Card).
Hit the back button to come out of the "wipe window"
Step 4:
Click on "Install" and choose the files in following order:
a) Dr Ketan's ROM
b) Data Fix for the ROM
c) Kernel
d) SuperSU (I used beta 2.71)
Once the flashing process is finished, reboot the system and wait for the phone to boot.
It will take a long time (around 10-15 minutes) to boot.
Once you are on setup wizard screen, choose to apply "Dr Ketan's fix" and then you can proceed like you do in any other ROM.
Downloads:
TWRP: https://dl.twrp.me/trltecan/
(Choose TAR or ISO as per your choice and flash accordingly)
ROM:
http://www.drketanrom.com/n910g.html
(All credit goes to Dr Ketan for his hard work & awesome ROM)
(Its for G variant)
Data FIX:
http://forum.xda-developers.com/not...guidehow-to-flash-dr-ketan-rom-6-0-1-t3364025
(Credit goes to @dr.ketan, & @Lanc-City for providing all the required info)
Kernel:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-h-vitamin-t3364213
(The credit for this Kernel goes to @Hani K.)
Super SU:
It can be found here on XDA
(Credit goes to @Chainfire)
Note: I am in no way to be credited for all this as the links provided above are a result of hard work from the respective developers. I have just compiled all the links into one thread so that it can help anyone like me to switch to other ROM.
Also, neither I nor any of the above mentioned developers/members are responsible for any fault that may arise due to improper flash or other reasons..
Do all of it at your own risk!
Last but not the least, I would like to thank @ricohz for helping me out when I was stuck in some steps..
(In the screen-shot attached, the model number is 920T for obvious reasons...so don't ask why it's not 910P..)
Do note that the APNs have to be edited manually, else the data connectivity would not be there!
(This thread should benefit the non-Sprint users........)
Click to expand...
Click to collapse
what about flashing a stock N910F rom is it possible ?
if it is could you PLEASE, provide a flashable zip for N910F rom
Shiva758 said:
Finally it worked . Actually i am doing ( kernel) mistake .Thanks for providing direct links and for your kind help.
Click to expand...
Click to collapse
Glad to know that you finally made it to boot.
Hossam. AbdELHakim said:
what about flashing a stock N910F rom is it possible ?
if it is could you PLEASE, provide a flashable zip for N910F rom
Click to expand...
Click to collapse
I don't think that you can directly flash the stock ROM of "F variant" directly. Doing so might result in a bricked device.
My advise to you will be to carry out the procedure as stated in this thread.
The ROM provided in this thread is 99% stock so you will not face any compatibility issues.
got echoe data fix MO here I come fallow by Dr ketans data fix should apply to all roms with minor tweaks
ricohz said:
NICE
SPRINT USERS IF YOU FLASH THIS TEXT WON'T GO OUT
MMS ARE FINE TEXT COME IN BUT WON'T GO OUT
this works for him because he's using a gsm sim card
Click to expand...
Click to collapse
Will third party apps work for text?
Sent from my SM-N910P using Tapatalk
I have an note 3 that was repaired because it wasn't connecting to the internet and when it was repaired, the system status was set to custom meaning it can't receive updates. So when I was rooting it, it wouldn't boot to android, instead it was stuck in download mode and saying "Could not do normal boot". It can't even go to recovery mode. I don't remember what was the build number was, so I don't know what firmware should I install. Also, it's in Korean when in download mode.
Model name: SM-N9005
I am lost and need help.
EDIT 11/02/2022: I just realized that in download mode it shows SM-N900S.
0aZer0 said:
I have an note 3 that was repaired because it wasn't connecting to the internet and when it was repaired, the system status was set to custom meaning it can't receive updates. So when I was rooting it, it wouldn't boot to android, instead it was stuck in download mode and saying "Could not do normal boot". It can't even go to recovery mode. I don't remember what was the build number was, so I don't know what firmware should I install. Also, it's in Korean when in download mode.
Model name: SM-N9005
I am lost and need help.
Click to expand...
Click to collapse
maybe the board was completely replaced by a korean model. you can double check if the product name shows either SM-N900S, SM-N900K, or SM-N900L in download mode. see attachment for reference
r0mushii said:
maybe the board was completely replaced by a korean model. you can double check if the product name shows either SM-N900S, SM-N900K, or SM-N900L in download mode. see attachment for reference
Click to expand...
Click to collapse
its a SM-N900S, also, I didn't modify my phone before it was fixed but I did have access to recovery mode to factory reset it but that was a long time ago.
What updates are you expecting ??
Last release was 2016 for south korean models
JJEgan said:
What updates are you expecting ??
Last release was 2016 for south korean models
Click to expand...
Click to collapse
I just pointed that out, I wasn't planning to update.
Hi,
Once I had this problem too.
Go here then search your model number and download the firmware you want (They are all official).
When downloaded extract the file.
Now download Odin and run it on your computer or laptop.
If there were 1 or 2 files in the zip file you downloaded, in Odin click "AP" and then select the bigger file. If there were 4 or 5 files in the zip file there is a 2 character word at the start of the extracted files like BL-xxxxx Or AP-xxxxx ETC. You can see these names in Odin too. Select the files by their name .
Now plug your phone to your computer or laptop with a good cable.
Turn your phone on to the Odin mode (download mode) and on your computer click Start.
After a while it will reboot and your Galaxy Note 3 will be fixed.
Note: When you select files in Odin it will take around 30 minutes to check the file so if it wrote "Odin is not responding" don't worry, just wait.
If you had problems please let me know.
A.M.2.K.M said:
Hi,
Once I had this problem too.
Go here then search your model number and download the firmware you want (They are all official).
When downloaded extract the file.
Now download Odin and run it on your computer or laptop.
If there were 1 or 2 files in the zip file you downloaded, in Odin click "AP" and then select the bigger file. If there were 4 or 5 files in the zip file there is a 2 character word at the start of the extracted files like BL-xxxxx Or AP-xxxxx ETC. You can see these names in Odin too. Select the files by their name .
Now plug your phone to your computer or laptop with a good cable.
Turn your phone on to the Odin mode (download mode) and on your computer click Start.
After a while it will reboot and your Galaxy Note 3 will be fixed.
Note: When you select files in Odin it will take around 30 minutes to check the file so if it wrote "Odin is not responding" don't worry, just wait.
If you had problems please let me know.
Click to expand...
Click to collapse
The website you sent doesn't have my phone region on it. Are there other websites that have a Korean firmware on it?
That site has N9006 firmware for download and it is online .
N9006 is China firmware only ,not Korea .
Firmware
sammobile
samfrew
updato
and many others .
0aZer0 said:
The website you sent doesn't have my phone region on it. Are there other websites that have a Korean firmware on it?
Click to expand...
Click to collapse
The region of the firmware is not very important.
Just download the one you like.
Other websites are not very good.
Because the files are so big, sometimes there are problems with them.
If you saw errors, sometimes it's for the file. Just download another one.
And if you wanted to get it easier, just root your device then install a good custom ROM like MagMa NX or N7 port phonersis or even android 11 with official LineageOS.
If you wanted to use a custom ROM please let me know to help you.
Because I installed custom ROMs many times.
JJEgan said:
That site has N9006 firmware for download and it is online .
N9006 is China firmware only ,not Korea .
Firmware
sammobile
samfrew
updato
and many others .
Click to expand...
Click to collapse
SamMobile firmwares are archived and you have to pay to get them. And not archived ones have bugs.
A.M.2.K.M said:
Hi,
Once I had this problem too.
Go here then search your model number and download the firmware you want (They are all official).
When downloaded extract the file.
Now download Odin and run it on your computer or laptop.
If there were 1 or 2 files in the zip file you downloaded, in Odin click "AP" and then select the bigger file. If there were 4 or 5 files in the zip file there is a 2 character word at the start of the extracted files like BL-xxxxx Or AP-xxxxx ETC. You can see these names in Odin too. Select the files by their name .
Now plug your phone to your computer or laptop with a good cable.
Turn your phone on to the Odin mode (download mode) and on your computer click Start.
After a while it will reboot and your Galaxy Note 3 will be fixed.
Note: When you select files in Odin it will take around 30 minutes to check the file so if it wrote "Odin is not responding" don't worry, just wait.
If you had problems please let me know.
Click to expand...
Click to collapse
Thanks man, that fixed my phone, but I used a different website called updato because it had my firmware on it. Now I have to root and install LineageOS on my phone now, but I need some tips and guides so I don't mess up my phone again lol.
0aZer0 said:
Thanks man, that fixed my phone, but I used a different website called updato because it had my firmware on it. Now I have to root and install LineageOS on my phone now, but I need some tips and guides so I don't mess up my phone again lol.
Click to expand...
Click to collapse
Happy to help
For custom ROMs, N7 port by phonersis is running android 6 and turns your Note3 into a Note7. There is also MagMa NX ROM that is running android 6 but it's Samsung Naught themed and it's a bit slow.
And LineageOS 18.1 (Android11) is the fastest ROM for your device. The only problem with LineageOS is that you don't have a Samsung phone anymore. It's like a Google Pixel. You can't use Samsung notes or other Samsung apps and services. And if you used S Pen much, I don't recommend LineageOS.
But currently I am using LineageOS and N7 port phonersis. Sometimes I switch between them (but I don't recommend switching).
Steps to install custom ROMs:
Step 1: take a backup of your important data.
Step 2: root your device. see how to root
Step 3: flash the specific version of TWRP.(Because some custom ROMs require a specific version of TWRP like MagMa NX or N7 port by phonersis)
Step 4: full wipe (system, data, dalvik, cache).
Step 5: install the ROM.
If you wanted to install N7 port by phonersis please read the instructions.
And download LineageOS from the official site.
If you had any problems please let me know .
Some of us been downloading firmware free of charge from sammobile for many years .Likewise other sites .But times change since this was an actively developed model .
Problem with Note 3 is that old uploads are now dead due to many years passed .
A.M.2.K.M said:
Happy to help
For custom ROMs, N7 port by phonersis is running android 6 and turns your Note3 into a Note7. There is also MagMa NX ROM that is running android 6 but it's Samsung Naught themed and it's a bit slow.
And LineageOS 18.1 (Android11) is the fastest ROM for your device. The only problem with LineageOS is that you don't have a Samsung phone anymore. It's like a Google Pixel. You can't use Samsung notes or other Samsung apps and services. And if you used S Pen much, I don't recommend LineageOS.
But currently I am using LineageOS and N7 port phonersis. Sometimes I switch between them (but I don't recommend switching).
Steps to install custom ROMs:
Step 1: take a backup of your important data.
Step 2: root your device. see how to root
Step 3: flash the specific version of TWRP.(Because some custom ROMs require a specific version of TWRP like MagMa NX or N7 port by phonersis)
Step 4: full wipe (system, data, dalvik, cache).
Step 5: install the ROM.
If you wanted to install N7 port by phonersis please read the instructions.
And download LineageOS from the official site.
If you had any problems please let me know .
Click to expand...
Click to collapse
How do I full wipe? and also at TWRP, it can't flash to boot. Is flashing to boot important?
0aZer0 said:
How do I full wipe? and also at TWRP, it can't flash to boot. Is flashing to boot important?
Click to expand...
Click to collapse
Full wipe= system-cache-dalvic(ART cache)-data.
If can't reboot to system it means you deleted your devices system. Which ROM are you gonna install? I am crDroid.
A.M.2.K.M said:
Full wipe= system-cache-dalvic(ART cache)-data.
If can't reboot to system it means you deleted your devices system. Which ROM are you gonna install? I am crDroid.
Click to expand...
Click to collapse
I'm gonna install LineageOS.
EDIT: Also, when I flashed the recovery, it cant do normal boot for some reason. I have a backup recovery and boot image also.
0aZer0 said:
I'm gonna install LineageOS.
Click to expand...
Click to collapse
Good choice