Database Users

Nougat Issues

I just reverted to T-Mobile firmware so I could upgrade to 7.0, since then I've noticed some issues.
I can't use my photos to change my wallpaper, or for the AID.
I can't go to the settings for the camera.
I've had some screen freezing when trying to change the notifications.
Has anyone else had similar issues, or are there other problems I should look out for?

Bildo41383 said:
I just reverted to T-Mobile firmware so I could upgrade to 7.0, since then I've noticed some issues.
I can't use my photos to change my wallpaper, or for the AID.
I can't go to the settings for the camera.
I've had some screen freezing when trying to change the notifications.
Has anyone else had similar issues, or are there other problems I should look out for?
Click to expand...
Click to collapse
My wife's phone is stock and I took the OTA for 7.0. I checked the camera settings and they are fine.
I'm wondering if you might need to flash the update again. If you do, you should wipe davlik and cache to make sure nothing got left behind.

androiddiego said:
My wife's phone is stock and I took the OTA for 7.0. I checked the camera settings and they are fine.
I'm wondering if you might need to flash the update again. If you do, you should wipe davlik and cache to make sure nothing got left behind.
Click to expand...
Click to collapse
I'd hate to do everything over again. I can't imagine how I screwed up either. I ODINed the T-Mobile files, and when the phone restarted, it updated to 7.0 automatically.

Bildo41383 said:
I'd hate to do everything over again. I can't imagine how I screwed up either. I ODINed the T-Mobile files, and when the phone restarted, it updated to 7.0 automatically.
Click to expand...
Click to collapse
When I checked smart switch, it didn't have an upgrade listed. But the phone did. This tells me that it was a TMO update. Since you flashed tmo files, I'm assuming the ones listed in T-Mobile Samsung Galaxy S7 Edge Guides, News, & Discussion, it should have taken. OTA is considered a dirty flash in that it doesn't wipe everything. Flashing with odin wipes everything. I'm just wondering if it didn't wipe everything the way it should.
The other possibility is after you updated, you loaded something that nougat doesn't like. If you do reflash, once it is done, do the bare minimum setup. Then try the items you listed that were a problem. If everything works ok, then you know it is something that got installed after the update. During the initial setup process, I never allow it to restore from another device, or samsung account. I get it setup as a new phone and then reboot. See how everything is working, then use smart switch to restore. If anything is missing, I go to the play store and download. Yes, it's a pain, but I've never had any issues.

androiddiego said:
When I checked smart switch, it didn't have an upgrade listed. But the phone did. This tells me that it was a TMO update. Since you flashed tmo files, I'm assuming the ones listed in T-Mobile Samsung Galaxy S7 Edge Guides, News, & Discussion, it should have taken. OTA is considered a dirty flash in that it doesn't wipe everything. Flashing with odin wipes everything. I'm just wondering if it didn't wipe everything the way it should.
The other possibility is after you updated, you loaded something that nougat doesn't like. If you do reflash, once it is done, do the bare minimum setup. Then try the items you listed that were a problem. If everything works ok, then you know it is something that got installed after the update. During the initial setup process, I never allow it to restore from another device, or samsung account. I get it setup as a new phone and then reboot. See how everything is working, then use smart switch to restore. If anything is missing, I go to the play store and download. Yes, it's a pain, but I've never had any issues.
Click to expand...
Click to collapse
So what you're saying is download the nougat files and install through odin. Gotcha ?

Bildo41383 said:
So what you're saying is download the nougat files and install through odin. Gotcha
Click to expand...
Click to collapse
I should have asked, have you rebooted since the update? There were some things like wifi calling and video calling that were missing after the OTA update. On reboot, it was all back. Try a reboot first. If things still aren't working, reflash.
If you previously backed up your apps and docs and images, etc., with smart switch before the update, then use that one when you restore.
Be sure though that after you do the odin flash, do a minimal setup. Then reboot. Then check everything out. If it is all good, do the restore from smart switch.
Good luck. Let me know how it goes.

androiddiego said:
I should have asked, have you rebooted since the update? There were some things like wifi calling and video calling that were missing after the OTA update. On reboot, it was all back. Try a reboot first. If things still aren't working, reflash.
If you previously backed up your apps and docs and images, etc., with smart switch before the update, then use that one when you restore.
Be sure though that after you do the odin flash, do a minimal setup. Then reboot. Then check everything out. If it is all good, do the restore from smart switch.
Good luck. Let me know how it goes.
Click to expand...
Click to collapse
Will do, thank you.

The keyboard is what has me the most annoyed, it is not as good as it was in Marshmallow. I have the Auto Predictive text Auto replace languages English, and Spanish. Back on Marshmallow, there was no need to switch between languages, you just had to type in either one, and the keyboard itself would switch automatically. And on Nougat, that doesn't happen anymore. I loved that feature on MM. Does anyone else have that problem? is there a way to install the MM Samsung keyboard on Nougat? or is there a solution?

androiddiego said:
I should have asked, have you rebooted since the update? There were some things like wifi calling and video calling that were missing after the OTA update. On reboot, it was all back. Try a reboot first. If things still aren't working, reflash.
If you previously backed up your apps and docs and images, etc., with smart switch before the update, then use that one when you restore.
Be sure though that after you do the odin flash, do a minimal setup. Then reboot. Then check everything out. If it is all good, do the restore from smart switch.
Good luck. Let me know how it goes.
Click to expand...
Click to collapse
Ok, I finally redid the whole thing, and as you suggested, everything works now. Thanks for your help mate.

Bildo41383 said:
Ok, I finally redid the whole thing, and as you suggested, everything works now. Thanks for your help mate.
Click to expand...
Click to collapse
Awesome!

Seriously all I'm waiting for is the Note 8

Should have posted this here... (oh well)
Has anyone else with generic quick charge 2.0 car chargers notice they are not "quick charging" anymore since the nougat upgrade?
I've got a couple of generic ones from ebay in my cars and they worked on the S7E using MM and still work on the note 4. But on the S7E after N7.0 update they aren't quick charging, they are just charging. (does that make sense?)

Nexus 10 (manta), Lineage OS 13, bootloop with Nova Launcher

Hi,
A few days ago I experienced a boot loop on my Nexus 10 with Lineage OS 13, build 20170909.
I broke it down to a recent update of Nova Launcher - going back to an older version and preventing Google Play automatic updates fixed it for me.
There are a number of reports of the same symptom pointing to Nova Google Companion, TeslaUnread, IFTTT, and Action Launcher.
I don't think this is an issue in those apps, but rather caused in the OS - an App should not be able to bring down the OS to a reboot (and even worse, due to the automatic restart of the launcher, causing a reboot loop).
any ideas of a fix in the OS? something else to prevent this from happening again?
Regards
sthones

I confirm the same. Constant bootloop with Nova Launcher

I am also experiencing this on an older version of CM13. Clearing cache does not work. Any quick fix possible via recovery?

stephendt0 said:
I am also experiencing this on an older version of CM13. Clearing cache does not work. Any quick fix possible via recovery?
Click to expand...
Click to collapse
I had the same problem with a Galaxy S3 running OctOS (CM13 based Android 6.0.1). The Nova Launcher update caused my phone to crash and reboot as soon as it was unlocked.
I was able to disable Nova in recovery (TWRP) using the built-in TWRP file manager. navigate to /data/app/com.teslacoilsw.launcher/ and delete base.apk. This will keep Nova from loading on startup but will not delete your data. My phone worked fine after that, albeit without Nova.

Thanks a lot, removing base.apk stopped the reboot loop.

My device has just started a bootloop too, but I don't even have Nova installed on it (though I do on my phone), just the stock launcher in CM / LineageOS.
I reset it to factory defaults and then it boots, but when it restores my old apps it starts looping again, so one of them is the cause. I didn't learn anything from the log via adb.
Any ideas?

I discovered it was one of my apps causing this. I removed it and it boots ok. https://play.google.com/store/apps/details?id=au.com.realestate.app&hl=en

hmoffatt said:
I discovered it was one of my apps causing this. I removed it and it boots ok.
Click to expand...
Click to collapse
Thanks for the hint, it was a real estate app from germany (immoscout24) which caused the problem at my device. Deleted the base.apk and everything works fine again.

Happening to me now, ffs im on the latest nightly and thats not fixed it.

TheRealSmurf said:
Thanks for the hint, it was a real estate app from germany (immoscout24) which caused the problem at my device. Deleted the base.apk and everything works fine again.
Click to expand...
Click to collapse
Same here.

daseddy said:
Same here.
Click to expand...
Click to collapse
Mine just started boot looping yesterday, but I hadn't installed any new apps in a while, and I have automatic app updating turned off (I also don't have any real estate apps installed, German or otherwise). Any hints on how to track down the culprit? Is there a boot log to look at?
Thanks!

Folks, there is a defect open in the official lineage bug tracking system. please add your comments there - maybe this needs some more support to get looked at:
https://jira.lineageos.org/browse/BUGBASH-1075

Same here. Started happening after it updated my apps yesterday. Removed nova launcher and all other Teslacoil software, problem remains. Can only start the tablet in Safe mode.

Seeing this on my device as well, except I am not able to remove the base.apk file because the app I installed somehow corrupted my bootloader such that I cannot get into recovery mode.
The culprit app? LinkedIn. Automatic app updates were turned off, and just before the bootloop started, the last thing I did was install that app. It finished, it rebooted, and hasn't stopped rebooting since.
When I put it into bootloader mode, it stops the continual rebooting and displays the "open panel" robot and "Downloading... do not turn off target". From there, all I can do is press power to start, then it goes back into rebooting. There is no way to get into recovery mode from there.
Also, attempting to keystroke into recovery mode just restarted the lineos infinite reboot.
Can't get into recovery, can't get the bootloader out of "Downloading" mode, and lineos continually reboots... Any wise sage souls have any ideas on this one? It looks like my device is bricked

It got me too - I don't have Nova Launcher installed. A few weeks ago the device started bootlooping with a build I had installed since september. I updated to one of the latest builds and had the same issue again. At the moment i got it working most of the time, but when i start certain apps it just reboots.
Seems to be independent to build version and can occur with different apps (at least thats what I've read here...).
Is this a Lineage Os 13 only thing or can I throw the device away now?
Greetings

I started having this issue this week as well. Oddly enough, I was still on CM12.1. In the middle of watching Plex and it rebooted, and has been boot-looping since. I did a factory wipe and while installing apps, it started looping again. I then installed the latest nightly of LOS13.1 and again, once it got part-way installing apps, it started boot-looping again. So this is not just a LineageOS thing, it seems to be an app update (I do have auto-update turned on).

I´m having the same problem without ever have the Nove Launcher installed. The bootloop started on my device several weeks ago. I tried to fix it by wipe partly or total and reinstall the latest nightly of los13 (20171126) and opengapps micro 27.11.2017 (and everything else).
As soon as I reinstall my apps, los goes back to bootloop. Sometimes, when I manually install only few apps, the system seems stable, until die next updates come by the play store.
So now I went back to stock rom until I´m getting aware of the problem beeing solved.

workaround, maybe
I wouldn'n call it a bootloop but rather a startloop
Anyhow, in my case I was able to break the loop by entering android's safe mode by simultaneously pressing vol up and down keys during startup. In safe mode, I was able to delete offending apps. After reboot, system is running again. Apps identified so far to make lineageos unhappy: open camera, yalp store, YouTube(!).., oruxmaps.

Removing offending apps works
Thank you!
I did the same with your advice... removed some apps and it works. I went back to September ROM, then update to Nov ASB ROM and it works fine.
ShevT is on it, here https://jira.lineageos.org/browse/BUGBASH-1052
and here: https://review.lineageos.org/#/c/197386/
Hope it gets fixed and merged soon... as this has been a pain the neck for a while, possibly related to a similar problem earlier this year.
loveandmarriage said:
I wouldn'n call it a bootloop but rather a startloop
Anyhow, in my case I was able to break the loop by entering android's safe mode by simultaneously pressing vol up and down keys during startup. In safe mode, I was able to delete offending apps. After reboot, system is running again. Apps identified so far to make lineageos unhappy: open camera, yalp store, YouTube(!).., oruxmaps.
Click to expand...
Click to collapse

I'm running CM13 and I have the same problem. I am not tech savvy with installing ROMs but managed to get to TWRP and did a reset to factory. Got part way thru optimising apps and the problem came back. I could only turn the tablet off via TWRP!
I don't mind going back to stock rom but not sure how to do it..best I look on here and start to educate myself..I'm 73yo so might not get finished before my time is up

Factory reset - locked bootloader - safetynet fails

Some history with the phone. I've gone back and forth a few times with this phone. At one point the bootloader was unlocked, I was rooted, etc etc. This was quite a while ago. Since then I have flashed the factory rom, locked the bootloader and ran 100% pure stock until this morning and everything worked just fine. Android Pay worked, etc. Today I decided I'd do a factory reset and not bother restoring data. Prior to doing that, I decided to give Magisk a quick try just for the heck of it. I flashed the current Oreo factory image (With Sept security patches) left the bootloader unlocked, flashed TWRP, installed Magisk via TWRP. Didn't really give it much of a chance but either way, after a quick check safetynet failed. So I figured, whatever no big deal. I flashed the factory image again, then relocked the bootloader, and eventually rebooted and signed back into my account and didn't bother restoring any backup. Let all the stock apps install/update, checked Android Pay.....and it wouldn't allow me to add a card. I checked the Safetynet tests and it fails the CTS Profile match. I'm pretty much at a loss now as to what in the world the problem is. The phone is fresh off of a factory reset and the bootloader is locked. No magisk, no root, nothing.
Another REALLY strange thing is, during boot up, I have to unlock the phone, then it continues booting up and eventually finishes the boot up process, although I think I recall reading about this being some new security thing. Either way, don't think it relates to my issue.

Well I unlocked the bootloader again, flash the August 7.1.2, relocked the bootloader, and after updating apps and Google Play Services, all is well again. Guess I'll just grab the OTA and go from there.

Wow, so sideloading the OTA broke it again.

Ug...found out there's a build 019. Apparently there's a problem with build 017. Sideloaded 019 and now I have no issues with safetynet.

glad someone else is seeing this, sideloaded OTA build 017 and Android Pay stopped working with it failing Safetynet's CTS Profile check

ParadingLunatic said:
Ug...found out there's a build 019. Apparently there's a problem with build 017. Sideloaded 019 and now I have no issues with safetynet.
Click to expand...
Click to collapse
Where is this 019 OTA? I'm having this same problem. I thought I was the Andromeda I tried but I knew that was rootless.
Thanks for shedding light on this.
---------- Post added at 07:45 PM ---------- Previous post was at 07:35 PM ----------
Did some more digging. Found it. Gonna see if it works.
Sent from my Nexus 6P using XDA-Developers Legacy app

ParadingLunatic said:
... Another REALLY strange thing is, during boot up, I have to unlock the phone, then it continues booting up and eventually finishes the boot up process, although I think I recall reading about this being some new security thing. Either way, don't think it relates to my issue.
Click to expand...
Click to collapse
This is because when you set the screen lock you checked the box to ask for the lock code when the system boots up. It's a good security measure that insures that if the phone is lost or stolen, a reboot will not allow someone to bypass the screen lock.

stevemw said:
This is because when you set the screen lock you checked the box to ask for the lock code when the system boots up. It's a good security measure that insures that if the phone is lost or stolen, a reboot will not allow someone to bypass the screen lock.
Click to expand...
Click to collapse
Yup I figured that out. I knew it was an added security feature but I couldn't recall where it was set. It seems that in Oreo, when you enroll in the fingerprint setup during the initial phone config, when it forces you to create a PIN it automatically sets that option without asking unlike how before, it used to ask.

ParadingLunatic said:
Yup I figured that out. I knew it was an added security feature but I couldn't recall where it was set. It seems that in Oreo, when you enroll in the fingerprint setup during the initial phone config, when it forces you to create a PIN it automatically sets that option without asking unlike how before, it used to ask.
Click to expand...
Click to collapse
Didn't realize it was automatically set in Oreo. I went thru 7 and the preview, so this option was already set. I will be getting the Pixel 2 XL, so it's something for me to check on.

oneplus 5 FC phone app after 9.0.2

if this not the right section kindly link me to the correct section
Yesterday my wife's phone capacitive buttons stoped working on OXYGEN OS 9.0.0 OP5
so i tried downloading from oneplus site the latest update and i have ended downloaded 8.1.0 instate of 9.0.2
and i flashed it locally but unfortunately things got worse and every thing stopped working wifi, launcher, apps, google, almost every thing stopped working and i realized what i just did
then i have searched for 9.0.2 from external website and downloaded and installed locally on op5 and things was good buttons came to work and every thing was fine except one little issue the contacts app and phone app is not working any more even i tried to install google contact with no luck
after every update i have wiped cash and rebooted
kindly advice and any help will be appreciated

yosry said:
if this not the right section kindly link me to the correct section
Yesterday my wife's phone capacitive buttons stoped working on OXYGEN OS 9.0.0 OP5
so i tried downloading from oneplus site the latest update and i have ended downloaded 8.1.0 instate of 9.0.2
and i flashed it locally but unfortunately things got worse and every thing stopped working wifi, launcher, apps, google, almost every thing stopped working and i realized what i just did
then i have searched for 9.0.2 from external website and downloaded and installed locally on op5 and things was good buttons came to work and every thing was fine except one little issue the contacts app and phone app is not working any more even i tried to install google contact with no luck
after every update i have wiped cash and rebooted
kindly advice and any help will be appreciated
Click to expand...
Click to collapse
Try wiping cache and data on those two apps from settings/apps

Already tried no change and i forgot to mention that in sync setting contracts showing (something went wrong)

yosry said:
Already tried no change and i forgot to mention that in sync setting contracts showing (something went wrong)
Click to expand...
Click to collapse
Oh, you've downgraded 9.0.0 to 5.1.7 and then updated to 9.0.2
That isn't a good idea... Anyways, let's see how we can help you.
Is your wife's phone rooted and has unlocked bootloader and TWRP? Anything?

strongst said:
Oh, you've downgraded 9.0.0 to 5.1.7 and then updated to 9.0.2
That isn't a good idea... Anyways, let's see how we can help you.
Is your wife's phone rooted and has unlocked bootloader and TWRP? Anything?
Click to expand...
Click to collapse
Nope its not rotted
And if there is a way to avoid rooting would be better

yosry said:
Nope its not rotted
And if there is a way to avoid rooting would be better
Click to expand...
Click to collapse
So it also means the bootloader is NOT unlocked and you don't have a twrp recovery installed?

strongst said:
So it also means the bootloader is NOT unlocked and you don't have a twrp recovery installed?
Click to expand...
Click to collapse
Right

yosry said:
Right
Click to expand...
Click to collapse
You can reboot to stock recovery and wipe cache and reboot. Let's see if it works.

strongst said:
You can reboot to stock recovery and wipe cache and reboot. Let's see if it works.
Click to expand...
Click to collapse
Done no change i mentioned in the 1 St post that i cleared cache after every install

yosry said:
Done no change i mentioned in the 1 St post that i cleared cache after every install
Click to expand...
Click to collapse
I'm sure the issue is cause of down and updating in a dirty way. You can maybe try again install 9.0.0 then 9.0.2
Otherwise a factory reset is the next option you should consider cause there's no way to wipe separate partitions or backup anything with stock recovery and without root or external help.

strongst said:
I'm sure the issue is cause of down and updating in a dirty way. You can maybe try again install 9.0.0 then 9.0.2
Otherwise a factory reset is the next option you should consider cause there's no way to wipe separate partitions or backup anything with stock recovery and without root or external help.
Click to expand...
Click to collapse
Ok i will try to install 9.0.0 then 9.0.2 again lets see if it will work thanks

Hey there i tried downgrading to 9.0.0 then to 9.0.2 with no luck leaving me with no choice but to factory reset and thankfully it worked eventually after talking a backup
So thank you all guys for support and appreciate your help

Cannot open SIM & Network settings / com.android.phone crashes after uptdate to OO10

Cannot open SIM & Network settings / com.android.phone crashes after uptdate to OO10
Device:
Rooted OP 6t, OxygenOS 10.3, stock recovery, Magisk 20.2, Magisk Manager 7.5.0
What did I do:
I updated from the last OxygenOS 9 Version to OxygenOS 10.3 by uninstalling magisk, restoring images and doing the manual update through the downloaded full image. Reinstall magisk. It all went well. First boot took a while but went through.
SIM was not recognised at all.
I've reset all network settings and cleared cache and data of com.android.phone.PhoneApp.
Found out here that its due to a call record magisk module which I uninstalled. Mobile data is working just fine since then.
I tried to uninstall magisk and reinstall it before rebooting in order to keep the possibility to keep root as I do not have twrp installed. (suggested here). I guess this is unrelated.
Issue:
I cannot access the SIM & Network Settings. When I try, the app com.android.phone crashes instantly.
Logs throw these warnings:
Code:
Unable to launch app com.android.phone/99901001 for broadcast Intent { act=android.telephony.action.CARRIER_CONFIG_CHANGED flg=0x15000010 (has extras) }: process is bad
Is there a way to check the carrier config or renew it?
Code:
Unable to launch app com.android.phone/99901001 for broadcast Intent { act=android.intent.action.SIM_STATE_CHANGED flg=0x5000010 (has extras) }: process is bad
Hows the SIM state changing?
and this Error:
Code:
Sending non-protected broadcast com.android.internal.telephony.ACTION_IMS_CAPABILITY_STATUS_CHANGE from system 1102:system/1000 pkg android
java.lang.Throwable
at com.android.server.am.ActivityManagerService.checkBroadcastFromSystem(ActivityManagerService.java:15963)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:16666)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:15980)
at com.android.server.am.ActivityManagerService.broadcastIntent(ActivityManagerService.java:16808)
at android.app.ContextImpl.sendStickyBroadcastAsUser(ContextImpl.java:1422)
at com.android.server.TelephonyRegistry.broadcastImsCapabilityStatusChangeForPhoneId(TelephonyRegistry.java:2644)
at com.android.server.TelephonyRegistry.notifyImsCapabilityStatusChangeForPhoneId(TelephonyRegistry.java:2636)
at com.android.internal.telephony.ITelephonyRegistry$Stub.onTransact(ITelephonyRegistry.java:964)
at android.os.Binder.execTransactInternal(Binder.java:1032)
at android.os.Binder.execTransact(Binder.java:1005)
I am not sure what to do. But I do want to avoid a full factory reset.
Thanks for your hints.

Alternatively is it possible to access the settings of this submenu through a different app or way?

hey_malik said:
Alternatively is it possible to access the settings of this submenu through a different app or way?
Click to expand...
Click to collapse
Sounds like a bad flash, or you didn't factory reset. If you update from 9 to 10 without wiping data, **** can happen

True, I did not because I don't want to set up the whole phone afterwards.
Could it be a solution to flash the ROM again through the integrated update system? Or would I then need to install twrp? I haven't done this in ages

Have you got any magisk module active?

estapagu said:
Have you got any magisk module active?
Click to expand...
Click to collapse
I uninstalled magisk for the update. Reinstalled it, forgot the call recording module. Removed that.
I still have systemless hosts, viper and YouTube vanced active.

hey_malik said:
I uninstalled magisk for the update. Reinstalled it, forgot the call recording module. Removed that.
I still have systemless hosts, viper and YouTube vanced active.
Click to expand...
Click to collapse
I had some SIM problems at the beginning related to a magisk module but I can't remember which. And another problem with WiFi after OTA update using magisk OTA udapte method, so finaly I deleted Magisk completely and updated from TWRP

Just to get this straight:
I may in a first step boot a twrp image (just boot) dirty flash the latest stock image, flash magisk (or not and lose root for the moment which is no issue because I have an unlocked boot loader) and see if the issue is still present. If yes a clean wipe and install is in order?!

@hey_malik
dude when i upgraded from 9.0.17 to 10.3.0 occurred same issue...
Backup all your stuff and MSM your device.
Look for '[OP6T][LATEST 10.3.0] Collection of unbrick tools' thread,
posts #83 - #86 and see how i solved.
Good luck :fingers-crossed:
Cheers

Dadditz said:
@hey_malik
dude when i upgraded from 9.0.17 to 10.3.0 occurred same issue...
Backup all your stuff and MSM your device.
Look for '[OP6T][LATEST 10.3.0] Collection of unbrick tools' thread,
posts #83 - #86 and see how i solved.
Good luck :fingers-crossed:
Cheers
Click to expand...
Click to collapse
I don't really get what you mean. What's msm? Magisk? And what am I supposed to do? Remove magisk completely? I've read the posts 83-86 but it's a bit cryptic for me.

hey_malik said:
I don't really get what you mean. What's msm? Magisk? And what am I supposed to do? Remove magisk completely? I've read the posts 83-86 but it's a bit cryptic for me.
Click to expand...
Click to collapse
Sorry, sometimes I take certain things for granted.
By MSM I meant (incorrectly) the unbrick / downgrade package
posted on the first page of the thread I indicated to you.
If you have not solved that problem and want to try,
I recommend using the Android 10-based package.
Back up all your stuff, be sure you have installed the OP6T drivers on your PC.
All information is already described in the aforementioned thread
or in the link posted on the first page that reports to that of iaTa.
All the credits go to these fantastic guys.
Cheers

Dadditz said:
Sorry, sometimes I take certain things for granted.
By MSM I meant (incorrectly) the unbrick / downgrade package
posted on the first page of the thread I indicated to you.
If you have not solved that problem and want to try,
I recommend using the Android 10-based package.
Back up all your stuff, be sure you have installed the OP6T drivers on your PC.
All information is already described in the aforementioned thread
or in the link posted on the first page that reports to that of iaTa.
All the credits go to these fantastic guys.
Cheers
Click to expand...
Click to collapse
I suggest you boot to Twrp, then flash the Twrp. Get inside twrp and flash these > OOS, Twrp, Magisk Then reboot again to twrp repeat > OOS, Twrp, Magisk. And for the last time reboot again to twrp and flash the Magisk.
You will be good to go. :good:

Is there any risk involved concerning the encryption?

hey_malik said:
Is there any risk involved concerning the encryption?
Click to expand...
Click to collapse
As you already mentioned, you are in Android 10, and if you are using the correct Twrp. There won't be any.
Still it's always better to take a back up just in case if something goes wrong.

Stuck with the same issue. Did you manage to get it fixed somehow?

Actually the latest available oo update to 10.3.1 fixed it.

hey_malik said:
Actually the latest available oo update to 10.3.1 fixed it.
Click to expand...
Click to collapse
Lucky you. I got this issue when switching to 10.3.1 from 9. I tried flashing 10.3.1 once again. Didn't work.

You need to uninstall Magisk then factory reset, it will get rid of all Magisk modules ghost residues. Then flash Magisk again with fastboot twrp method. I had this and going back to factory state was the only fix. No need to flash again and again the rom it doesn't touch Magisk data in /data partition.

hey_malik said:
Actually the latest available oo update to 10.3.1 fixed it.
Click to expand...
Click to collapse
Just an update, this worked for me too. Thanks for posting that tip else I would have went ahead and reset the phone. You saved me a hell lot of trouble.
Additionally, I figured out a solution which might work for people still having this issue. I haven't tested this myself since I found this after my issue was solved.
The reason why the issue happened to us is because the system app "Phone Services" was missing, or not installed properly while dirty flashing. There is an alternative hidden activity for sim settings called "com.android.settings.network.telephony.MobileNetworkActivity", which is not a part of Phone Services app, but a part of the Settings app itself. This could be invoked using any activity launcher apps available in the Play Store.
Also, this activity gives more advanced sim settings too. So, probably worth a look if interested.

Same problem here, but fixed!!
Sim not working anymore after update to Magisk 21.2. nothing would change it.
After installing previous version (21.1) the problem persisted. After almost giving up, I found this thread. Simply uninstalled the OOS Native Call Enabbler module and everything workes like a charm again!!!
So it was an easy fix (once you know) and I am very thankful, because I would never have thougt of it! Unfortunately I cannot record Calls anymore, nor find the module now that I am successfully running on 21.2 again with working SIM. Though the choice between being able to use my SIM or record calls was easy
Hope someone finds use of this info.
As mentioned before Encryption is not a problem if the right TWRP version is used.
Put in you password (or pin) and all is nicely decrypted and reachable in TWRP Recovery.
Good luck to all!
PS: still hoping for a new (compatible) call recorder module though