Database Users

How to Root G935FXXU1DPLT Latest 7.0 Build

Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT

sriszone said:
Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT
Click to expand...
Click to collapse
Root same way as you rooted marshmallow. Flash twrp, flash supersu 2.79. everything is the same. it will take a while to boot though be patient.

Flash TWRP in Odin
Flash SR3-SuperSU-v2.79-SR3-20170114223742.zip in TWRP

no its not working......After install recovery stuck in Samsung Flashing logo....

TWRP is making the devices get stuck on Samsung logo....

I think what is happening is that when you install only the twrp the encryption of the device conflicts and leaves in bootoolp. When you install twrp and root , root already comes with a tool that takes out the encryption. But if you just want twrp, as was my case, you should, first of all, on your own twrp, wipe data and then flash no-verity-opt-encrypt.

Having root and no encryption sucks. Think I'll wait

Found Some Official Announcement From @Chainfire
Source :- Link
ChainFire Info
I'm not entirely sure what is going on here yet. I've had the stock firmware randomly stop booting even without modifying the boot image (rooting). Others have also reported that just flashing TWRP may trigger a bootloop (which is weird). I have some ideas what the cause may be, but it will be some time before I can properly investigate them.
The only way I seem to reliably get both TWRP and SuperSU working right now is:
- Flash TWRP (3.0.2-5) to recovery
- Immediately boot into TWRP
- If you were encrypted, format /data (ext4) and reboot into TWRP again
- Flash SuperSU v2.79-SR3 in TWRP
- Reboot into Android
The first boot will take a while if you performed that format, but for me it ultimately completes. Note that your device will be running unencrypted at this point!
Of course, if you format /data, you will lose all your data (including contents of internal storage!). Before I flashed the new version, I used FlashFire v0.54-PRE to create a backup of /data and internal storage to the removable sdcard, and restore that backup after flashing DPLT, rooting, and reinstalling FlashFire. This worked fine for me, and all my settings - including fingerprints and system settings - transferred fine. I came from the first Nougat beta, but I've seen others reporting success doing the same thing coming from Marshmallow. As always, your mileage may vary.
Unfortunately, due to this boot-loop issue with DPLT and encrypted data, it is also impossible to use FlashFire to upgrade the firmware itself to DPLT while keeping root if you started with an encrypted device.
I am not sure if the same difficulties exist with other official builds than DPLT, nor if the same problems occur with any of the custom ROMs based on DPLT. The S7 is my daily driver so I don't like to experiment with it too much
Below attach the required Files, I gonna try tomorrow. If anyone tried now please report update.
DOWNLOAD HERE

I did root few minutes ago on my 7.0 but now im not unable to launch s health because knox is disabled.

sriszone said:
Found Some Official Announcement From @Chainfire
Source :- Link
ChainFire Info
I'm not entirely sure what is going on here yet. I've had the stock firmware randomly stop booting even without modifying the boot image (rooting). Others have also reported that just flashing TWRP may trigger a bootloop (which is weird). I have some ideas what the cause may be, but it will be some time before I can properly investigate them.
The only way I seem to reliably get both TWRP and SuperSU working right now is:
- Flash TWRP (3.0.2-5) to recovery
- Immediately boot into TWRP
- If you were encrypted, format /data (ext4) and reboot into TWRP again
- Flash SuperSU v2.79-SR3 in TWRP
- Reboot into Android
The first boot will take a while if you performed that format, but for me it ultimately completes. Note that your device will be running unencrypted at this point!
Of course, if you format /data, you will lose all your data (including contents of internal storage!). Before I flashed the new version, I used FlashFire v0.54-PRE to create a backup of /data and internal storage to the removable sdcard, and restore that backup after flashing DPLT, rooting, and reinstalling FlashFire. This worked fine for me, and all my settings - including fingerprints and system settings - transferred fine. I came from the first Nougat beta, but I've seen others reporting success doing the same thing coming from Marshmallow. As always, your mileage may vary.
Unfortunately, due to this boot-loop issue with DPLT and encrypted data, it is also impossible to use FlashFire to upgrade the firmware itself to DPLT while keeping root if you started with an encrypted device.
I am not sure if the same difficulties exist with other official builds than DPLT, nor if the same problems occur with any of the custom ROMs based on DPLT. The S7 is my daily driver so I don't like to experiment with it too much
Below attach the required Files, I gonna try tomorrow. If anyone tried now please report update.
DOWNLOAD HERE
Click to expand...
Click to collapse
You can root but you have to disable encryption. Not a fan of that personally so I'll wait for another solution. If I lose my phone at least I'll have secure power up enabled. There is no bypassing that. There are too many FRP exploits on Youtube so having no encryption and simply a password isn't enough in my opinion.
---------- Post added at 10:29 PM ---------- Previous post was at 10:29 PM ----------
Mystero said:
I did root few minutes ago on my 7.0 but now im not unable to launch s health because knox is disabled.
Click to expand...
Click to collapse
Since you are rooted, uninstall S Health and install a lower version number which doesn't require Knox.

Galactus said:
Since you are rooted, uninstall S Health and install a lower version number which doesn't require Knox.
Click to expand...
Click to collapse
Hi, i cannot manage to unistall S Health, tried already two apps, after reboot app is still there and if i try to install older version i get corrupted file error.

guys please explain what is encryption and unencription here.... how can i disable ? can we flash this no-verity-opt-encrypt-5.0.zip

sriszone said:
Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT
Click to expand...
Click to collapse
I got fully working root and TWRP on Nougat G935FXXU1DPLT.

I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues

cross_312 said:
I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues
Click to expand...
Click to collapse
Security log will stop after you launch SU application and let SU to disable knox, it takes me always two attempts, disable, keep trying then i restart smartphone and after restart i try to disable knox again and it works, no more pop ups.
About S Health I'm looking for solution, so far should be enough to install older version set it up and update for new one, problem is that i cannot uninstall old version to get new one working.

cross_312 said:
I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues
Click to expand...
Click to collapse
S Health is now locked down if you have tripped knox. The only solution is to use an older version.
Mystero said:
Security log will stop after you launch SU application and let SU to disable knox, it takes me always two attempts, disable, keep trying then i restart smartphone and after restart i try to disable knox again and it works, no more pop ups.
About S Health I'm looking for solution, so far should be enough to install older version set it up and update for new one, problem is that i cannot uninstall old version to get new one working.
Click to expand...
Click to collapse
SuperSU couldn't disable Knox for me after many tries. In the end I just used Titanium to freeze Knox.

CuBz90 said:
S Health is now locked down if you have tripped knox. The only solution is to use an older version.
SuperSU couldn't disable Knox for me after many tries. In the end I just used Titanium to freeze Knox.
Click to expand...
Click to collapse
What did work for me was try to disable when SU was trying i did restart device and right after restart i did tried that again and it worked. Maybe lucky...
About S Healht how can i use older version if i cannot install one because new one exist, do you know how to remove s health? i Tried two apps for removing system apps without success.

Mystero said:
What did work for me was try to disable when SU was trying i did restart device and right after restart i did tried that again and it worked. Maybe lucky...
About S Healht how can i use older version if i cannot install one because new one exist, do you know how to remove s health? i Tried two apps for removing system apps without success.
Click to expand...
Click to collapse
Try titanium. Backup the app first and then uninstall.

CuBz90 said:
Try titanium. Backup the app first and then uninstall.
Click to expand...
Click to collapse
Sir thank you, i do not know how it is possible that another apps did not worked but titanium did removed new S Health. Afterwards i did install last version of S Health i found before version 5, After launching S Health and connecting account i did update on new S health and everything works.
You really saved me. Thank you

Mystero said:
Sir thank you, i do not know how it is possible that another apps did not worked but titanium did removed new S Health. Afterwards i did install last version of S Health i found before version 5, After launching S Health and connecting account i did update on new S health and everything works.
You really saved me. Thank you
Click to expand...
Click to collapse
i have tried to remove the s health app with titanium but everytime i try to install vesrion 4.8 phone says that i can not install this app beacuse there is a package with the same name
what verison did you install before s health 5 and how did you install it.
and can anyone tell me how do i make lucky patcher to work properly

Rooting Galaxy s7 edge (SM-G935F) nougat causes black camera with crash.

Hi!
I rooted my galaxy s7 edge that had stock version of android 7 (nougat) on it using this tutorial: http://www.droidviews.com/install-twrp-root-galaxy-s7-and-s7-edge-on-nougat-g935fxxu1dplt/. Now when I open built-in camera app it shows me a black screen for few seconds and then it says "Camera has stopped" and it offers me to "Open app again" and "send feedback" And it keeps happening over and over again.
Lemma: The reason is rooting.
Proof: Camera app worked perfectly. After I rooted my phone it started to crash like I described above. Then I tried to force quit camera app and delete it's cache/data. It did not help. After that I wiped entire cache partition. Still no help. After that I wiped all partitions except system. That did not work either. Then I re-flashed unmodified original stock ROM. Then camera worked perfectly again. Then again I rooted my phone the using tutorial I linked above. And again exactly the same issue. Camera app show black screen for few seconds and then crashes with exact same error message. ∎
Does anyone know fix for that? And why it happens? Is it some kind of samsung's anti-root thing that prevent camera fromworking on rooted phones or what?
Update [SOLUTION]:
In case someone else has same problem.
My solution was to skip restarts in TWRP steps. No restart between format and installing packages. Restart once when everything in TWRP part is done.

Root doesn't break your camera
I just Rooted my G935F that had Nougat as official firmware and had zero problems with the camera.
Sent from my SM-G935F using Tapatalk

I have international version of samsug with exynos CPU. Maybe this changes anything?
Root doesn't break your camera
Click to expand...
Click to collapse
But then how do you explain that before rooting camera worked and after rooting it didnt work?
And how do you explain that after I flashed original rom back, camera started working again?
And finally, how do you explain that after rooting 2nd time the camera again started to show black screen and crash?
I have done nothing else than rooting. I have not added any custom mods or anything. For me it starts working again every time I flash original stock rom and shows that black screen and gives error every time I root it.
I downloaded original firmware from here: https://www.sammobile.com/firmwares/database/SM-G935F/ (I chose baltic (only 1 occurrence in the table))
Maybe that specific tutorial I linked is bad one? Could anyone check that?

Rooted my G935F and no problems here for me.
I suggest you follow the tutorial here on xda and try again.

Could you post link to tutorial please? Then I could be sure I used the same tutorial as you did.
PS! Now I also noticed that with rooting I lost auto brightness adjusting and also manually changing brightness didnt do anything. Right now I am back on un-rooted rom because I need camera functionality to work. But would love to get it rooted. Is there any info on cf-auto-root and android 7 yet?

sysctl said:
Could you post link to tutorial please? Then I could be sure I used the same tutorial as you did.
PS! Now I also noticed that with rooting I lost auto brightness adjusting and also manually changing brightness didnt do anything. Right now I am back on un-rooted rom because I need camera functionality to work. But would love to get it rooted. Is there any info on cf-auto-root and android 7 yet?
Click to expand...
Click to collapse
A simple search here you'll find all you need. You are the only person I've ever read of that had camera problems like you've stated after Root. Again rooting won't break your camera.
I've Odin to stock literally hundreds of times testing Rom/Mods/themes as a tester for several teams from my s3 up to and including my G935F.
I've also flashed every Rom available for the G935F and the only ones with camera problems are the Lineage or AOSP Roms which more than likely are kernel related. Start here https://forum.xda-developers.com/announcement.php?a=81
Then this
Here's one
https://forum.xda-developers.com/showthread.php?t=3489011
sysctl said:
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse

Again rooting won't break your camera.
Click to expand...
Click to collapse
But then how do you explain that before rooting camera worked and after rooting it didnt work?
And how do you explain that after I flashed original rom back, camera started working again?
And finally, how do you explain that after rooting 2nd time the camera again started to show black screen and crash?
How can you be so sure if you didnt even answer these? Just because it worked for you doesnt mean it works for all. Looks like you dont even try to read what I write. You just read the title of topic and then jump to comment with out even reading the content of post itself...
I have done nothing else than rooting. I have not added any custom mods or anything. For me it starts working again every time I flash original stock rom and shows that black screen and gives error every time I root it.
Also, posting some specific link rather than general starting point would help to guarantee that I use right tutorial for rooting. From these links you posted I didnt find any specific tutorial. I did search and dig these links, but I didnt find any specific tutorials. All I found was some tools and some roms. But cf-auto-root works for android 6 but I have 7 on my phone so I cant use that and I did not find any rooting tutorials on this forums.
Edit: I have also tried this tutorial: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084 . The same issue. The camera stops working after that.

sysctl said:
But then how do you explain that before rooting camera worked and after rooting it didnt work?
And how do you explain that after I flashed original rom back, camera started working again?
And finally, how do you explain that after rooting 2nd time the camera again started to show black screen and crash?
How can you be so sure if you didnt even answer these? Just because it worked for you doesnt mean it works for all. Looks like you dont even try to read what I write. You just read the title of topic and then jump to comment with out even reading the content of post itself...
I have done nothing else than rooting. I have not added any custom mods or anything. For me it starts working again every time I flash original stock rom and shows that black screen and gives error every time I root it.
Also, posting some specific link rather than general starting point would help to guarantee that I use right tutorial for rooting. From these links you posted I didnt find any specific tutorial. I did search and dig these links, but I didnt find any specific tutorials. All I found was some tools and some roms. But cf-auto-root works for android 6 but I have 7 on my phone so I cant use that and I did not find any rooting tutorials on this forums.
Edit: I have also tried this tutorial: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084 . The same issue. The camera stops working after that.
Click to expand...
Click to collapse
Ok here is what you need to do.
Download a logcat app and get a logcat of it forceclosing.
I can't magically look in your device and see what, if anything is wrong.
As far as you saying you've searched well if you really did you would've found several tutorials.
How do I know?? Because I've used them myself.
It took me less than 5 minutes to root my new G935F using the TWRP Guide here on XDA
You seem to be the only one in hundreds that's claiming root broke your camera.
Provide a logcat in the Q&A and maybe a dev can help you.
sysctl said:
But then how do you explain that before rooting camera worked and after rooting it didnt work?
And how do you explain that after I flashed original rom back, camera started working again?
And finally, how do you explain that after rooting 2nd time the camera again started to show black screen and crash?
How can you be so sure if you didnt even answer these? Just because it worked for you doesnt mean it works for all. Looks like you dont even try to read what I write. You just read the title of topic and then jump to comment with out even reading the content of post itself...
I have done nothing else than rooting. I have not added any custom mods or anything. For me it starts working again every time I flash original stock rom and shows that black screen and gives error every time I root it.
Also, posting some specific link rather than general starting point would help to guarantee that I use right tutorial for rooting. From these links you posted I didnt find any specific tutorial. I did search and dig these links, but I didnt find any specific tutorials. All I found was some tools and some roms. But cf-auto-root works for android 6 but I have 7 on my phone so I cant use that and I did not find any rooting tutorials on this forums.
Edit: I have also tried this tutorial: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084 . The same issue. The camera stops working after that.
Click to expand...
Click to collapse
Sent from my SM-G935F using Tapatalk

You could try to reset your settings

Same issue on smg935w8 lost camera and screen brightness. Also can't mount micro sd... we're you able to fix? I thought it was a bad root then I re flashed and the issue came back...twrp 3.1.0 supersu 2.79 and no verity 5.1
---------- Post added at 10:15 PM ---------- Previous post was at 09:50 PM ----------
im re flashing stock and tomorrow ill redo twrp and super su and skip dm verity patch think that might be the issue as it worked before for me last week and i then messed up by turning dev mode off and disabling oem and when i reflashed after that i have been flashing the dm verity patch....
give that a try if your still having issues

had similar issue, my camera app keeps crashing, i went to settings, applications then cleared cache after stopping it, i hope that will fix your camera too

Gray.Fox said:
had similar issue, my camera app keeps crashing, i went to settings, applications then cleared cache after stopping it, i hope that will fix your camera too
Click to expand...
Click to collapse
Thanks I've tried clearing cache for everything no luck. I originally thought it was because I might have deleted a system app with titanium but when I reflashed it all (firmware,tarp,supersu,no small verity disable 5.1) I still had the issue.
Lastnight I wiped and flashed the entire firmware. Everything works. Tonight I'm goi g to try and only flash twrp then supersu as I only want root. Hopefully that fixes my issues.
OP have your issues been resolved?
I'll let you know once I get it working on mine and we'll get you sorted out. I believe it's something with the steps or order as I had root fine for a day then had to reflash due to messing around and didn't do it my original way and that caused my issues.

flashed twrp 3.1.0 from odin with auto reboot off.
then booted to twrp. swiped right to mount system,
wipe data(format data) type yes.
mount microsd as mtp copy supersu 2.79 over if its not already on you microsd card.
else just install it from zip
cleared cache/delvik
rebooted to system
log in and setup everything and restore
camera and auto brightness...stilll doesnt work.

ok so after multiple tries to fix this (flash stock) everything works,, root and it breaks tried clearing all cache in system and twrp no difference... then i loaded phone info and used the secret codes to find out that my camera firmware is not installed....so im trying Flashfire to reflash the AP only while injecting supersu and maintaining root.... it is just booting up.....and OMG!!!!it works!!!!
so....for some reason...firmware was corrupting..... no clue why tired multiple methods and nothing... and im not a noob either.....
what finallllllllly worked was.... flash your rom and get root how you would normally. camera/auto brightness/and mounting usb doesnt work....boot to twrp. get your ap md5 file on your internal storage
reboot to system,. get flashfire from playstore or chainfires website
install and then click the + select firmware and select the tar file
only install system....uncheck boot and cp
then in the everroot select injject supersu, preserve recovery
and flash.... it will start flshing and boot to syteem once done..
everything is working nice
finalllyyyy!!!!
hope this can atleast help OP
no clue why i was losing firmware on the flashes

@unit68 Tnx for sharing. This time I got camera and brightness adjustment work out of box. But if in any point of time I happen to need your tutorial, I'll give it a try and let you know.
I am not sure if it is by chance or not but what I did differently this time was:
1) I paid attention to step where it asked to disable auto reboot (can anyone explain why?)
Previously I thought it shouldnt matter so I kept auto reboot for convenience.
2) I did format data, install no-verity-opt-encrypt-5.0 and SuperSU-v2.79-201612051815 and wipe dalvik cache with out rebooting between (Anyone know if that matters?).
Previously I had done it: format - reboot - install no enc - wipe dalvik cache- reboot - install super su - wipe dalvik cache - reboot .
Now I did it format - intall no enc - install super su - wipe dalvik cache - reboot.
I'll see for few days if anything else comes up or if camera breaks down again. Btw @unit68 what happens when you try some bloatware remover that run with root access? Do you get rid of bloatware or not? I tried few of them such as no bloat for example. Some complain that uninstall failed some seem to uninstall the app but when they reload app the app is still there and it's also still in app menu. Just curious if you have the same same issue. And is it safe to delete apk file manually? Or would it cause phone to crash/boot loop? When I ran supersu it complained about knox and asked me to disable it but it never managed to (however root checker tells me I am root). Maybe knox is protecting bloatware? Any ideas?

Flash your able too get it working! It was soooo frustrating. So for Knox supersu asks to disable then seems to hang so I go about my business reopen supersu it'll ask again and then is successful.
To remove bloat I normally just go to titanium and remove the ones I don't want
No issues on that and all my apps that require root work fine (titanium,adaway, flashfire)

This time disabling knox worked too... It turned out that all 3 apps that I used were note able to remove bloatware. App you named worked and also ROM toolbox lite works.
Btw when I google bloatware, the lists are incomplete.... Do you happen to know list of apps that must not be uninstalled? I guess white list would be better idea than black list.
Is installing/uninstalling app same as removing/adding apk files? So that I could cut and paste everything expect file manager and launcher to usb memory stick and then start adding required apps back one by one?

ive seen some samsung debloating software around. i honestly just remove stuff based on manually debloating for last fewyears. if i dont know what theapp is for i google it to see if its ok to remove. normally i remove samsung knox, few other samsung apps, some google apps (music, games, videio), briefings some edge panels, live wallpaper, and carrier branding apps(for me rogers) stuff like that. if you are going to i recommend you do a backup first as it ccan mess up your phone if you uninstall an important app. . also once your do uninstall you need to reboot ... the paid version of titanium allows you to freeze applications so you can try that first before removing it.

I had the exact same issues: camera crashing, blue light filter not working, brightness not working, etc. It was supersu. You need the right version of supersu, it's 2.79 SR0. It's checksum is f4ecbf5814215bf569ff3324fc1c91f5

ScreAmeR01 said:
I had the exact same issues: camera crashing, blue light filter not working, brightness not working, etc. It was supersu. You need the right version of supersu, it's 2.79 SR0. It's checksum is f4ecbf5814215bf569ff3324fc1c91f5
Click to expand...
Click to collapse
Interesting..ill check that if I need to to Flash. I have 2.79 but maybe I grabbed an old version or a beta. Mine says 20161205 I think it may have been sr3
Edit _ just checked I grabbed sr0 the stable release from 20161215 not the sr3 beta
Maybe it was corrupt when I flashed

No Access to device Storage outside TWRP after system update to 9.0.17

Hey,
so i ****ed up my 6t (stock rom, twrp installed and rooted with magisk) yesterday after ota updating to 9.0.17., got stuck in a bootloop.. i guess it was the lawnstep magisk module that caused the **** up... but im not sure. normally i could do a ota just fine. so after unbricking and flashing 9.0.17 manually i cannot Access my storage outside from TWRP (when in recovery i can access the storage just as normal and it shows also on my pc as normal), apps cannot Access, pc - same. And i have no clue whats causing it.
Obviously i switched to file transfer in the notification area, usb Debugging enabled, reboot pc, 6t, switched usb ports, wiped the whole good damn phone again. nothing.
Any clues?
help would be greatly appreciated!
best,
T

Solved

TanakaX5 said:
Solved
Click to expand...
Click to collapse
Thanks for the very descriptive resolution to your issue. This will definitely help out anyone else that has this issue in the future!

Jager said:
Thanks for the very descriptive resolution to your issue. This will definitely help out anyone else that has this issue in the future!
Click to expand...
Click to collapse
Haha OK ok.. you are quite right...
It wasn't really a solution, did full reset of software with the unbrick tool provided here in the forum.
After that updated via Ota rooted and all is good again,
Peace

Haven't had that issue with 9.0.17, but I have had the issue where I'll go to use an app that requests root permission, it'll fail. Check magisk manager it says magisk isn't installed. A reboot fixes it, but I never had that issue on 9.0.16

magisk install after updating to oos 10.3.2 causing no sim

i have tried updating though the normal way and flashing via twrp and it seems to work fine. reinstall twrp and still works fine.
but after flashing magisk 20.3 i no longer have any kind of connection connection and the sim cards no longer show up.
also.. can i flash the old 10.3.1 update over the newest or am i going to have to reload my backup?

cwtechshiz said:
i have tried updating though the normal way and flashing via twrp and it seems to work fine. reinstall twrp and still works fine.
but after flashing magisk 20.3 i no longer have any kind of connection connection and the sim cards no longer show up.
also.. can i flash the old 10.3.1 update over the newest or am i going to have to reload my backup?
Click to expand...
Click to collapse
EDIT: It was a module i has installed through magisk that was causing the issue..
sorry for posting but i could not find any reason as to why it was happening or find any info on it.

cwtechshiz said:
EDIT: It was a module i has installed through magisk that was causing the issue..
sorry for posting but i could not find any reason as to why it was happening or find any info on it.
Click to expand...
Click to collapse
Which module?

konsolite said:
Which module?
Click to expand...
Click to collapse
Magisk bricked my phone during the same situation

Luckypatcher Android 11 BOOTLOOP WARNING

I recently moved to OOS11 and had trouble rooting. Now that I have my phone rooted I can no longer restart it or it will bootloop. Does anyone have any idea why that would be?
This will be the 3rd time I have MSMed my phone in the last 3 days.
As many problems as I'm having I'm thinking of just going back to Android 10.
Thanks in advance.

night hawk said:
I recently moved to OOS11 and had trouble rooting. Now that I have my phone rooted I can no longer restart it or it will bootloop. Does anyone have any idea why that would be?
This will be the 3rd time I have MSMed my phone in the last 3 days.
As many problems as I'm having I'm thinking of just going back to Android 10.
Thanks in advance.
Click to expand...
Click to collapse
Can you provide a bit more background, do you have any Magisk modules installed, does your phone boot at all? Did you patch your own boot.img just so that we can help you out better

Shredz98 said:
Can you provide a bit more background, do you have any Magisk modules installed, does your phone boot at all? Did you patch your own boot.img just so that we can help you out better
Click to expand...
Click to collapse
I'm patching my own boot.img and I only have skyvalex call recorder installed as a module. When it happens I just get stuck in an infinite boot animation with the two dots circling continuously.
I think I may have narrowed down the problem by going through the steps that I normally go through after MSMing my phone (I've done it 4 times now lol) and rebooting after each step to see what triggers it. Here are the steps in order.
1. MSM the phone and do bare minimum to get to home screen so I can enable OEM ulocking and usb debugging. (rebooted just fine)
2. Unlock bootloader with adb. (rebooted just fine)
3. Install magisk manager, switch to beta update channel, patch boot.img, flash patched boot.img (rebooted just fine)
4. Setup up phone with google account, set up fingerprint, etc (rebooted just fine)
5. Enable magisk hide and systemless hosts (rebooted just fine)
6. Restore a backup using oneplus switch from before this all started happening. (rebooted just fine)
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. I'm wondering if the new "use magisk module" mode in the newest version is causing the problem. Maybe if I installed EdXposed and used that like I used to maybe it would remedy the problem. Or maybe I should just use an adblock magisk module. However its far passed my bedtime so I will confirm this tomorrow if possible.

Disable the modules you have installed.
Reboot, does it loop?
If no then it's a module
If it does then it's your boot img
I'd recommend booting your patched boot img then directly installing via magisk (do not reboot until you have)
Hope this helps

night hawk said:
I'm patching my own boot.img and I only have skyvalex call recorder installed as a module. When it happens I just get stuck in an infinite boot animation with the two dots circling continuously.
I think I may have narrowed down the problem by going through the steps that I normally go through after MSMing my phone (I've done it 4 times now lol) and rebooting after each step to see what triggers it. Here are the steps in order.
1. MSM the phone and do bare minimum to get to home screen so I can enable OEM ulocking and usb debugging. (rebooted just fine)
2. Unlock bootloader with adb. (rebooted just fine)
3. Install magisk manager, switch to beta update channel, patch boot.img, flash patched boot.img (rebooted just fine)
4. Setup up phone with google account, set up fingerprint, etc (rebooted just fine)
5. Enable magisk hide and systemless hosts (rebooted just fine)
6. Restore a backup using oneplus switch from before this all started happening. (rebooted just fine)
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. I'm wondering if the new "use magisk module" mode in the newest version is causing the problem. Maybe if I installed EdXposed and used that like I used to maybe it would remedy the problem. Or maybe I should just use an adblock magisk module. However its far passed my bedtime so I will confirm this tomorrow if possible.
Click to expand...
Click to collapse
The issue is definitely lucky patcher, I had the same problem and my phone was useless until I got rid of it. So it seems it's not playing well with A11 or OOS11 in any case do not use it or you'll end up in a boot loop.
Cheers!

Ah lucky patcher..oh dear, can't help you with that crap.
Best advice, get rid

Bummer about Lucky Patcher....

In b4 the lock.

I can confirm the same findings, lucky patcher seems to break reboots later.
Hopefully a new version will find and resolve the issue, but until then not much we can do but to wait.

Unfortunately doesn't appear to be any way to get around this or recover from the bootloops without a wipe/reimage. Can't get access for adb during bootanimation, cant boot from a boot img, just basically stuck.
@OP, perhaps you can put a message in your thread's title just warning against LP on A11 for the time being.

uaktags said:
Unfortunately doesn't appear to be any way to get around this or recover from the bootloops without a wipe/reimage. Can't get access for adb during bootanimation, cant boot from a boot img, just basically stuck.
@OP, perhaps you can put a message in your thread's title just warning against LP on A11 for the time being.
Click to expand...
Click to collapse
I changed the title. Do we know if LP can be used with xposed on Android 11 with success still?

night hawk said:
I changed the title. Do we know if LP can be used with xposed on Android 11 with success still?
Click to expand...
Click to collapse
Did xposed work on 11?

night hawk said:
...
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. ...
Click to expand...
Click to collapse
@night hawk
Hi!
You better read the XDA Forum Rules and refrain from such topics. We don't accept discussions about issues with warez!
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
Click to expand...
Click to collapse
THREAD CLOSED!