[HELP] MATE 10 lite - Nova 2i SOFT BRICKED- FRP LOCK-BOOTLODER LOCKED - Huawei Nova 2i (Mate 10 Lite / Honor 9i) Questions

I'm having Mate 10 lite(Nova 2i aka Honor 9i). The device is now in soft brick state.
Device current state.
OEM - locked
Bootloader- locked
Recovery- EMUI
Huawei eRecovery- EMUI
What I have done so far.
Downloaded the firmware from Huawei Firmware Finder and tried forced update option , Firmware: RNE-L21 8.0.0.311(C185).
Response- Failed
Flash TWRP , Response- Since OEM lock and Bootloader is locked. Can't flash.
I'm having Lock code. But OEM lock via USB debugging cannot be turned ON since device is soft bricked. :crying:
In attachments I've uploaded "about phone", OEM & Bootloader status, Recovery.
If anyone has any solution please share.

did you try doing a factory reset?
if not then try once
if that dsnt work boot into fastboot and connect device and type this in CMD "fastboot -w"
this will erase everything from your phone even all data
then try booting up the device and then try unlocking the device

I will create a thread tonight for how to unbrick honor 9i.
do check that tonight you will be able to get back to EMUI8.0
although for you, u will need the bootloader unlock code as your device is locked

Related

Huawei mate 9 pro LON_AL00 bootloader relocked by itself

I own a LON_AL00 MATE 9 pro, i had obtained the bootloader unlock code from huawei and unlocked the bootloader, but everytime i enter a fastboot command like flash recovery or oem relock it comes up with an error message saying failed remote command not allowed. Then after a week of trying thr bootloader relocked itself and the unlock code does not work anymore. Please help.
Fixed.. Huawei backup will lock bootloader and break TWRP, never use huawei backup or hisuite backup!!! Can be fixed only with a factory reset.

bootloader unlocked, can't flash anything with error: FAILED(remote: Command not all)

in bootloader screen i can see in red « PHONE Unlocked » and just under in green « FRP Lock ».
in nougat settings, OEM unlock is grayed out in disabled position in settings (maybe it's normal as i unlocked the bootloader already).
i already flashed before successfully TWRP and stock recovery both in MM and nougat without problem, but it's not working anymore.
« flashboot oem lock », « flashboot boot », etc… are giving the same error. only basic things like « fastboot » reboot works.
I googled for hours my problem, it's all about people having their bootloader not unlocked.
Any idea?
Well, i reply to myself, the FRP Lock was the problem, and a bug in B301 prevented me from setting this to off, i had to do a rollback procedure to EMUI4 (rollback update + full firmware update) so that i could disable FRP lock by setting the OEM unlock option (which way available after 2 reboots).
be prepared to have backups, hopefully one day we will have full firmware for nougat available!
edit: dunno how to mark a thread as « solved »
Hi, i have the same Problem, FRP is locked and bootloader unlocked...how did you rollback to EMUI4? I cannt enter TWRP...is it possible to unlock FRP in fastboot mode? THX for your help!
*zahni* said:
Hi, i have the same Problem, FRP is locked and bootloader unlocked...how did you rollback to EMUI4? I cannt enter TWRP...is it possible to unlock FRP in fastboot mode? THX for your help!
Click to expand...
Click to collapse
Well, i placed the rollback files in dload folder of the external sd card then i entered recovery to apply it.
It is not normal that you can't enter any recovery, you shall try the 4 combinations to be sure (boot with or without the cable connected, and with either vol up or vol down), one of the combination will bring you to fastboot and another to the installed recovery. Try also with both up and down pressed just in case ^^

cant flash recovery on B161 bootloader unlocked but also wont lock again!

Hi guys,
I am trying to flash the OEM info as its currently on according to DC unlocker:
Found Phone : VNS-L11
Model : Huawei HiSilicon Kirin Android phone
IMEI : 860921031654789
Firmware : VNS-C900B161
SIM Lock status : unlocked
my phone about device screen displays:
Model: HUAWEI VNS-L31
BUILD : VNS-L31C432B161
EMUI 4.1.1
ANDROID 6.0
I have downgraded to MM B161 thinking this will help and has factory reset my phone during the process but no luck.
I get a boot-loader unlocked warning since i was on nougat, and unable to lock or unlock the boot-loader when i try.
when trying to flash TWRP recovery i get: FAILED (remote: image verification error)
OEM UNLOCK is enabled and so is DEBUGGING
any ideas, really be great to get this fixed finally
Try to download again TWRP the use the command:
fastboot flash recovery twrp.img

OEM unlock toggle is not working

Hi.
I´ve unlocked the bootloader on my P10 plus.
But now, the toggle to unlock OEM on the developer settings is greyed and I can´t perform any fastboot commands.
Any help?
Thanks
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
singularoctopi said:
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
Click to expand...
Click to collapse
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
the same is happening to me
Eyezcripz said:
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
i have my huawei p10 plus doing the same thing of yours.....only erecovery mode and when i get to boot in fastboot mode is only fatboot mode & rescue and i had locked bootloader and frp lock.....but i was reading that huawei just block the page to unlock bootloader i just dont know why they did that /......
Maybe try re-unlocking and flashing stock rom, kernel, system, and boot. (Or you can try the method I used to update manually). Requires to be able to acces external sd card.
Hmu if you want to know how.

Huawei P8 Lite bootloader locks itself

Hi guys, I have a P8 lite here with a problem: it stays stuck on the huawei logo. So I'm trying to flash a new rom to solve the problem.
I went to the huawei website, obtained the oem code, then i proceed with
fastboot oem unlock CODE
output OKAY, the phone changes its status to UNLOCKED
then I
Fastboot reboot
and the bootloader it LOCKED again. Do you know why this happens? Could I try to flash twrp right after the OEM UNLOCK without rebooting?

Categories

Resources