I own a LON_AL00 MATE 9 pro, i had obtained the bootloader unlock code from huawei and unlocked the bootloader, but everytime i enter a fastboot command like flash recovery or oem relock it comes up with an error message saying failed remote command not allowed. Then after a week of trying thr bootloader relocked itself and the unlock code does not work anymore. Please help.
Fixed.. Huawei backup will lock bootloader and break TWRP, never use huawei backup or hisuite backup!!! Can be fixed only with a factory reset.
Related
Hi.
I´ve unlocked the bootloader on my P10 plus.
But now, the toggle to unlock OEM on the developer settings is greyed and I can´t perform any fastboot commands.
Any help?
Thanks
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
singularoctopi said:
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
Click to expand...
Click to collapse
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
the same is happening to me
Eyezcripz said:
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
i have my huawei p10 plus doing the same thing of yours.....only erecovery mode and when i get to boot in fastboot mode is only fatboot mode & rescue and i had locked bootloader and frp lock.....but i was reading that huawei just block the page to unlock bootloader i just dont know why they did that /......
Maybe try re-unlocking and flashing stock rom, kernel, system, and boot. (Or you can try the method I used to update manually). Requires to be able to acces external sd card.
Hmu if you want to know how.
Hi guys, I have a P8 lite here with a problem: it stays stuck on the huawei logo. So I'm trying to flash a new rom to solve the problem.
I went to the huawei website, obtained the oem code, then i proceed with
fastboot oem unlock CODE
output OKAY, the phone changes its status to UNLOCKED
then I
Fastboot reboot
and the bootloader it LOCKED again. Do you know why this happens? Could I try to flash twrp right after the OEM UNLOCK without rebooting?
I'm having Mate 10 lite(Nova 2i aka Honor 9i). The device is now in soft brick state.
Device current state.
OEM - locked
Bootloader- locked
Recovery- EMUI
Huawei eRecovery- EMUI
What I have done so far.
Downloaded the firmware from Huawei Firmware Finder and tried forced update option , Firmware: RNE-L21 8.0.0.311(C185).
Response- Failed
Flash TWRP , Response- Since OEM lock and Bootloader is locked. Can't flash.
I'm having Lock code. But OEM lock via USB debugging cannot be turned ON since device is soft bricked. :crying:
In attachments I've uploaded "about phone", OEM & Bootloader status, Recovery.
If anyone has any solution please share.
did you try doing a factory reset?
if not then try once
if that dsnt work boot into fastboot and connect device and type this in CMD "fastboot -w"
this will erase everything from your phone even all data
then try booting up the device and then try unlocking the device
I will create a thread tonight for how to unbrick honor 9i.
do check that tonight you will be able to get back to EMUI8.0
although for you, u will need the bootloader unlock code as your device is locked
Is there any script to bypass factory reset after unlock bootloader in emui 8?
Or I don't know if there is some apl like odin inorder to flash files with locked boooadee for huawei devices?
And as second question can u use my previous bootloader code (emui 5) to unlock emui 8 bootloader?
Use dload method to flash service ROM. I think there is service ROM for EMUI 8 now as well, at least for the European version of the phone I think, not really sure. The bootloader resets to state "locked". If you relock using "relock" in fastboot, it will show "relocked". And yes, you can use the same code to unlock again, it changes only if the motherboard in the phone gets changed.
I know about dload method and used for upgrade to emui 8
Im going to unlock my bootloader and flash twrp
Im looking for a trick like some OPO script that can bypass data wipe after unlocking.
Hi guys, I want to re-lock the bootloader of my Huawei P Smart FIG LX1 unlocked with PotatoNV. When I try to do the operation with adb "fastboot oem relock (or lock) 1111111111111111" I get this error message "failed: remote stat not match". But by entering the command "fastboot oem unlock 1111111111111111" the procedure is successful.
I also tried to install a stock rom but the bootloader remains unlocked. Thank you all!
Try to restore with stock recovery, it should relock it