ok, so i recently dropped my phone and when i turned it on, it was not responding to touch. so i tried to reboot. when i did, it started in bootloop. when i tried to do factory reset, it gave the error: load_ztecfg! FAILED. what can i do, if anything, to restore to working condition.
Related
So, basically i ****ed my phone up after rooting and flashing it with the previous Cyanogenmod. The way i did it is by trying to factory reset it with the cyanogenmod and it didn't work, it totally ****ed up my bootload menu. The update came in yesterday and i tried updating it but it was stuck in the "Downloading" screen for 2-3 hours and i can't turn it on again. My question is is there a way to fix it or is it dead?
So for a few weeks now, my phone has been having bootloop issues. I've been trying to fix it on my own, but no luck so far.
I can get it into download mode. Up until I tried to restore it to its stock version via the User Tool, I could get it to the factory reset options, which led to the options to wipe cache, reboot, etc. However, none of those options worked. When I attempted to reset to factory settings, I got the "dead" green android with the red triangle. Then the screen goes black and starts bootlooping again.
Once in awhile I can manage to turn it on after having it turned off for hours, or even days and it works like normal, except that if I lock it or turn it off it will end up restarting and starting to bootloop again. Which is bad seeing as it drains somewhat fast due to being overheated while having the screen constantly on.
As for my experience trying to use update recovery, it gets to the downloading part then stops and gives me this message "[011.700.147.062.092]??? ??? ? ? ????". I don't even know if I am using the correct stock rom for my phone, since I only know its MEID and model name.
do u resolved this, i have the same problem
Hi,
Hope someone can help. I have a J-500FN, bought used worked fine for a couple weeks, then started having issues with apps closing and system processes closing. Tried factory reset. Worked ok for about a day, then it just crashed completely. Read up, and decided I needed to flash a stock ROM. Went through the whole process, seemed successful, but it got stuck in bootloop. I saw doing a cache wipe/data wipe might fix that, so I tried that. During wipe process, I got an error message:
E: unknown volume for path [/sbfs]
E: unknown volume "/sbfs"
The only solution I found for the issue involved installing sidesync, but since I don't know how to install it on my phone when I can't get past the recovery screen.
Thanks for anyhelp!
Hello, one week ago I received the Axon 7 mini from Gearbest, since then I haven't used it that much, but yesterday while watching a youtube video it turned off suddenly and when I tried to turn it on it just gotted stuck in the zte logo. After several tries, and trying of wiping the data and doing the factory reset (what gave error messages such as "can't mount"...), I decided to update it to from the sd card using firmware of the russian zte. After that the phone could pass the zte logo and start the configuration screen slowly, but started to rebooting, it took me several trys till I could finish the set up, but the problem was still, then I tried to do the factory reset as well as data wipe now succesfully, but the rebooting and slowness still there, so I can't do anything because I can't finish the setup correctly, and even the only way to turn off the phone without the boot loop is inside the menu of android recovery. I hope you can help me, thanks.
Help
Initially I replaced the LCD. After being replaced with a new LCD, the first use is still normal. But after a while, my device turns off. But after being turned on again, just stuck on the mi logo. Then I tried it repeatedly but still stuck on the mi logo. Then I delete all data and do wipe partitions. But always experience unusual things. Loading cleans the data running, but when it's 5% it arrives directly to 99% and my device turns off again. I have tried many times, but always with the same results. And finally I tried to flash with recovery mode. The process went smoothly and looks fine, after the flash finishes, the device is restarted. But after being restart, after all this time, it just stuck on the mi logo. Then finally I removed the battery and I put it back on. But after I turn it back on, it just stuck on the mi logo again. Finally I tried to enter recovery mode, but apparently what appeared was the inscription 'the system has been destroyed'. And finally I flash using fastboot mode, but the device is still locked. And I have used edl mode too, but always asked for an account that has been authorized. Is there any other way? Please help, because I really need to use this device.
Thank you for those who helped