Database Users

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini
First Unlock Bootloader& Install Twrp .​
Note:This Is Modified Guide Of Unlock Bootloader And Flash Twrp with Installation Of Cm12.1 Rom
DISCLAIMER:
Unlocking the bootloader cause warranty void :silly: ,I do not give guarantee of possibility of relock bootloader again .I am not responsible for the risk bootloop, softbrick, hardbrick, so the 2nd world war, natural disasters, atomic bombs, etc: v: v: Unlocking the bootloader cause loss of files in internal memory (full reset), backup all apk use ES file explorer or any application and do not forget the important data in Internal memoy.So you have to be patient and read well.
BASICS NEEDS:
Flyme 4.5.4I(International Version Only Not Indian Version) If not have first download It from here ->
www.flymeos.com/firmwarelist?modelId=18&type=1
PC / Laptop winXp or Above
and Minimal ADB Driver download here ->
http://forum.xda-developers.com/showthread.php?t=2317790
Rooted Meizu mini M2 (M2/Mini ONLY !!!)
Busybox already installed,if not then download from Play Store
File unlock the bootloader and TWRP download here ->
http://www37.zippyshare.com/v/fvm5edpr/file.html
ADB and Fastboot Files downloaded at ->
https://goo.gl/mZzVS4
(Specifically Windows 8 and above) Disable driver signature that ADB Mediatek detected.
How: Go start button -> type and select advanced startup option -> select restart now -> select troubleshoot -> select advanced option -> select the startup settings -> select restart -> wait for it to reboot and enter the blue screens -> type the numbers -> wait until the computer / laptop restart
STEPS: :highfive:
Extract "file_root.zip" in PC / Laptop drive anywhere, it's up to you.And extract files unlock_bootloader_with_new_twrp put the file "twrp_2.8.7.0.img" in the folder of "file_root.zip"put the file "unlock_bootloader.sh" in to external folder, open your phone go to Settings accessibility ->Developer option -> USB debugging -> Tick To ON plug Your Meizu m2 into laptop/PC go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB .(Keep In mind Minal Adb Driver Folder should include file_root folder in it if not then copy folder and paste it there unless You will get error in detecting device).
Write "adb devices",wait for it to detect the device. If detected as "unauthorized" , please check again, there must be a warning. Select the checkbox and select OK, will eventually checked again be detected serial number
in your pc/laptop type "adb shell"type "su", check if there notification in phone.
And asked permission root, select grant permission then type.
"sh /storage/sdcard1/unlock_bootloader.sh"
wait until it says "now you can fastboot oem unlock your device"then type
"adb reboot bootloader"then type "
fastboot devices" to check whether fastboot already entered yet. if it has been entered, it will be detected.
Then type "fastboot oem unlock" push the button Vol UP and wait. once completed, the screen will be stuck. Do not panic, because this is not like brick hard reboot (press the power button for about 10 seconds to death and on again) Congratulations, you have bootloop (still unfinished the process by the way.
3)enter recovery (when bootloop direct press Power + Vol UP to vibrate)The Select Wipe Data Factory reset .
push restart wait for 10 minutes.You've done Unlock Bootloader
Bootloader is already unlock yet, how To flash TWRP
enter the command prompt (go to the folder "file_root" hold down the keyboard Shift + right click on the mouse/touchpad select "open command windows here) "adb reboot bootloader"enter fastboot like stated above.Then type.
"fastboot flash recovery twrp_2.8.7.0.img"
wait a minute turn off thr phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Now It's Time To Flash Cm 12.1
Note: As i Told You To Flash Flyme 4.5.4i(international Version)First.If still not installed then you will not able to install Cm12.1
Why?
Ans: As this rom is for Meizu M2 mini and model number of both devices Meizu M2 and Meizu m2 mini are not same so in this rom its developer had scripted a script in that it will not allow you to install Cm12.1 until it Check Ether Its Meizu M2 mini or not(Our is meizu m2) if it had some problem it will decline further installation process
Like this "Error In Executing Updater Binary In Zip"
Steps for installing rom
1.Unlock bootloader
2.Install Twrp
3.download Cm12.1.zip in SD
4.reboot to recovery
5.wipe everything( It Can Wipe Your Internal Storage too So i recommend You to Get Internal Storage Backup Too)
6.install zip
8.reboot to system
It will take time for first boot so don't worry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Still Not Able to flash error still comes
then try this two below given steps
1)Try with Flyme 5 beta version it can be flashed(untested)
2)Decompress Cm12.1 custom rom then go to bin folder there will be a file name"otasigcheck.sh"
Delete that file recompress whole rom again.
not recompress whole folder just recompress all files wich will be there eg :boot.img,system,bin etc (tested working 100%)
After this you may not able to get features update so you if you want to update download manually
"Credits"
Developer Of Cm12.1 :good: (Most Thankful Person)
Murtaza Piplod (Whole New Guide Noob Friendly )
My All co workers :highfive:

Good job

sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?

twrp meizu m2
jai aplique cet method et jai re
usi merci baucou.

salman.ecti said:
sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?
Click to expand...
Click to collapse
Rip dude you just finished your phone
why you guys do this -_-

how to unlock bootloader
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]

moshe3150 said:
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]
Click to expand...
Click to collapse
a guy can fix this i will tell him to contact you

try to repair using UFI box. @salman.ecti

Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..

Ro33_Y said:
Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..
Click to expand...
Click to collapse
i will write a guide for it

Dear murtaza1326,
I'm sorry I'm nagging, but maybe you have a link to how to make the switch between the versions?
I need the device urgently, and I don't want to ruin it again, especially after I paid for the repair.

murtaza1326 said:
i will write a guide for it
Click to expand...
Click to collapse
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!

lilcat1 said:
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!
Click to expand...
Click to collapse
just paste recovery.img and unlock bootloader file and its done

OK done

Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka

Dsnagi2811 said:
Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka
Click to expand...
Click to collapse
Method of unlocking will be different.

adarshm4you said:
Yu is not yureka its yunos which is chinese based flyme os.Install flyme 4 to unlock bootloader first.
Click to expand...
Click to collapse
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2

Dsnagi2811 said:
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2
Click to expand...
Click to collapse
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?

adarshm4you said:
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?
Click to expand...
Click to collapse
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms

Dsnagi2811 said:
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms
Click to expand...
Click to collapse
Yes you can use abow method.Better is follow vedios in youtube for better understanding unlocking m2 before doing.

Convert Chinese Mate 8 to EU variant - noob tutorial

NOOB tutorial - How to convert Chinese Mate 8 to EU variant
I had a rough time to convert my Mate 8, so i am writing this tutorial ( description of the steps i took to be more precise) to help others.
I used couple tutorials on this forum to achive this, so all thanks goes to:
somboons – SRK tool and [GUIDE] How to switch to use stock firmware from other models
duraaraa - Howto: Load International Mate 8 Software on Chinese Mate 8.
Snoop05 - [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
First the tools you will need:
1. 15 seconds ADB Installer v1.4.3
http://forum.xda-developers.com/showthread.php?t=2588979
2. Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
http://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797
3. EU Rom from duraaraa (download rom only)
http://forum.xda-developers.com/mate-8/general/howto-load-international-mate-8-t3293619
4. stock firmware C432 B152 from somboons link (download rom only)
http://forum.xda-developers.com/mate-8/general/guide-how-to-switch-to-stock-firmware-t3374259
Before next step you need a bootloader key. There are 2 ways, one costs 4 usd, other free. Search the forum how to obtain the key.
Now, what I did:
PART I.
1. Install ADB drivers on PC
2. Install SRK tool
3. Unlock bootloader
4. (I installed twrp and rooted the phone, but I think this is not needed at this point)
Extract rar file that you downloaded with EU rom from duraaraa in directory
C:\1 (or any other name, but keep it short for simplicity)
5. Boot the phone into fastboot mode, using ADB or holding power+volume down.
6. Run the following fastboot commands:
fastboot flash cache c:\1\cache.img
fastboot flash cust c:\1\cust.img
fastboot flash system c:\1\system.img
fastboot flash userdata c:\1\userdata.img
Now, I got EU rom on my Mate 8, BUT, my phone didn’t get wireless reception and showed only 3,8 GB of main storage.
PART II.
Followed the guide from somboons.
1. Install TWRP using SRK tool.
2. Root the phone using SRK tool.
3. Using SRK tool go to “7. Utility” than “9. Changing oeminfo and custom.bin” – choose “2 Mate 8” and then option “2. EU (c432)”
4. unzip update.zip copy update.app from C432 B152 rom to “phone/sdcard/dload/update.app”
5. Install root explorer, edit build.prop in SYSTEM folder of your phone and change line “ro.build.display.id=Deleted” to “ro.build.display.id=NextL00C432B011”
6. Using SRK tool install stock recovery.
7. Now the tutorial says “after boot to system again , press *#*#2846579*#* > 4> 1 (mate 8 , it will be reboot and process install starting..)” but it didn’t work for me.
I switched the phone off, then pressed both volume up and down keys and power.
The phone updated and tadaaaa.. . I was on Stock EU rom, no root, bootloader locked.
Storage encrypted on next boot.
Also i did factory reset and wipe chase from stock recovery, but i do not remember after what was that. i think after step 6. - probably it is not needed.
After this you should have working stock rom.
All that is left is to istall OTA update from phone menu 2 or 3 versions in succession..
If you do not understand something try reading original tutorials from duraaraa and somboons
THE END

Noobs will stop troubling us

sure, IF they actually read this thread ^^ maybe best to stick it into your signature for future reference
Sent from my Huawei Mate 8 NXT-AL10

jbmc83 said:
sure, IF they actually read this thread ^^ maybe best to stick it into your signature for future reference
Click to expand...
Click to collapse
ROFL :laugh:

Hello dears,
First of all, thanks for the clear instruction.
I followed your instruction but I'm stuck at Part 1 - step 6 (fastboot flash cust c:\1\cust.img).
This said FAILED (see below screenshot from ADB)
http://imgur.com/a/6nX4u
And my phone is now not working as normal. Phone getting eRecovery but not working. Please help me!
What do I do now?
Phone model is Huawei Mate 8 NXT-TL00

uugankhuu said:
What do I do now?
Click to expand...
Click to collapse
Unlock the bootloader...

Agadoo said:
Unlock the bootloader...
Click to expand...
Click to collapse
I already unlock my bootloader.
http://imgur.com/a/7oeZc
---------- Post added at 09:08 AM ---------- Previous post was at 09:03 AM ----------
When I install recovery 6.0 (3rd step on SRK tool) it telling me everything is OK
http://imgur.com/a/g1Tof
But when device rebooted it is never going to TWRP. It going to Huawei eRecovery.

uugankhuu said:
I already unlock my bootloader.
Click to expand...
Click to collapse
In fastboot mode you see this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Agadoo said:
In fastboot mode you see this?
Click to expand...
Click to collapse
Yes, but without text "FRP locked".

is it posible to do it even on latest AL10-nougat update?

BTW guide not working for me.... after i flash all the files in fastboot mode phone reboots and im staring at black screen
Where am i wrong?

One simple doubt: what are the advantages of having the EU variant? I got the chinese mate 8, but I selected my language and I can use it perfectly. Also, as far as I know, chinese firmware gets earlier updates. So, I'm confused.

uugankhuu said:
Hello dears,
First of all, thanks for the clear instruction.
I followed your instruction but I'm stuck at Part 1 - step 6 (fastboot flash cust c:\1\cust.img).
This said FAILED (see below screenshot from ADB)
http://imgur.com/a/6nX4u
And my phone is now not working as normal. Phone getting eRecovery but not working. Please help me!
What do I do now?
Phone model is Huawei Mate 8 NXT-TL00
Click to expand...
Click to collapse
I also get a FAIL on this, and the 3rd one. I'm updated to Nug. on AL-10

faregran said:
One simple doubt: what are the advantages of having the EU variant? I got the chinese mate 8, but I selected my language and I can use it perfectly. Also, as far as I know, chinese firmware gets earlier updates. So, I'm confused.
Click to expand...
Click to collapse
First, Chinese model can't change home launcher. E.g. Google launcher.
Second, in Chinese model didn't installed Google apps and features, even languages. You can't add more languages because it restricted.
Third, device shows lot of necessary Chinese apps and features. E.g. yellow page etc.
and many other.
I bought my phone from Guangzhou, and want install EU version. But still couldn't change Chinese version.

SIM is not detected and unknown baseband after installing ROMs on lenovo A3500-HV

My device is Lenovo A3500-HV
when I try to install any rom higher than cm 12.1 , the devices loses its baseband and no longer detects sim cards !
The device is guaranteed to be not bricked : stock firmware and cm12.1 work fine !
what I tried :
Flashing roms with CWM recovery or various versions of TWRP with no errors but in vain .
Backup :
- The following backup operations also done on cm12.1 which is the only working rom ! -
1- Tried backing up the nvram from my stock rom using various versions of twrp recovery and restoring back on roms but
IN VAIN !
2- Tried backing up using MTK Droid Tools but when I restore the back up on any rom it doesn't work giving this output and after rebooting nothing happens !
HTML:
In system already available: Android Debug Bridge version 1.0.32
--->>> Connect to device <<<---
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
--- ERROR :pttycmd1 device NOT found!
--- file nvram.bin not selected
--- \data\nvram install
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other attempted methods :
1- Installing stock firmware or cm12.1 and dirty flash higher rom .
2- Mobileuncle Tools (I can't access engineering mode !) .
3- Chamelephon .
4- Maui META 3G ( It doesn't detect the device when roms installed ) .
5- Using TWRP terminal and AT+ command .
6- Deleting nvram folder .
I CAN'T ACCESS ENGINEERING MODE ON ANY ROM !
Using codes or Mobileuncle Tools , nothing gets me to the Engineering Mode !
NOTE : WIFI works fine on any rom !
I get all roms from :
http://4pda.ru/forum/index.php?showtopic=624077
and unfortunately the have no English discussion :'( .

Fix.
ebram96 said:
My device is Lenovo A3500-HV
when I try to install any rom higher than cm 12.1 , the devices loses its baseband and no longer detects sim cards !
The device is guaranteed to be not bricked : stock firmware and cm12.1 work fine !
what I tried :
Flashing roms with CWM recovery or various versions of TWRP with no errors but in vain .
Backup :
- The following backup operations also done on cm12.1 which is the only working rom ! -
1- Tried backing up the nvram from my stock rom using various versions of twrp recovery and restoring back on roms but
IN VAIN !
2- Tried backing up using MTK Droid Tools but when I restore the back up on any rom it doesn't work giving this output and after rebooting nothing happens !
HTML:
In system already available: Android Debug Bridge version 1.0.32
--->>> Connect to device <<<---
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
--- ERROR :pttycmd1 device NOT found!
--- file nvram.bin not selected
--- \data\nvram install
Other attempted methods :
1- Installing stock firmware or cm12.1 and dirty flash higher rom .
2- Mobileuncle Tools (I can't access engineering mode !) .
3- Chamelephon .
4- Maui META 3G ( It doesn't detect the device when roms installed ) .
5- Using TWRP terminal and AT+ command .
6- Deleting nvram folder .
I CAN'T ACCESS ENGINEERING MODE ON ANY ROM !
Using codes or Mobileuncle Tools , nothing gets me to the Engineering Mode !
NOTE : WIFI works fine on any rom !
I get all roms from :
http://4pda.ru/forum/index.php?showtopic=624077
and unfortunately the have no English discussion :'( .
Click to expand...
Click to collapse
Ok, I know that it's probably too late for a fix but i will just post it just in case if you still haven't had it fixed yet or incase if someone else got the same issue like me and you...
You will need both of these files:
1) A3500HV_A442_01_37_140920_ROW.7z
2) A modified Scatter File that enables the flashing of NVRAM+ the NVRAM File itself.
3) The SP Flash Tool.
I got all of them from the 4pda forum, and you can also search and download the 1st file which is an upgrade firmware with smaller size (312 MB) and i will attach the NVRAM scatter file and the NVRAM .. you will need the latest WinRAR version to etract it , and you can get the SP Flash tool easily from the same place you found the 1st file..
When you have all of them together in one folder then extract everything to its own folder name, and before anything else you need to take a full backup using Lenovo Assistant because the tablet will be reset, then open the SP Flash tool and point it to the scatter file from inside the 1st file's extracted folder (Not the NVRAM's one).
Check the "DA DL all with checksums" then click the Firmware Upgrade Option then click Download and at this point turn off the tablet and plug it using the USB cable WHILE HOLDING THE Volume Down Button and let the process finish until you see the big green check.
Power on the tablet and walk through the initial setup and at the home screen open the phone dialer and dial *#06* to make sure that the IMEI is still invalid or unknown, then turn the tablet off again.
Using the SP Flash tool select the Scatter file that i attached here with NVRAM in the same location then click Download, now plug in the tablet once more using the USB cable WHILE HOLDING THE Volume Down Button and let the process finish until you see the big green check.
That's it now just power on the tablet and check with the dialer again and you should already have the signal mark working.

medoamer said:
Ok, I know that it's probably too late for a fix but i will just post it just in case if you still haven't had it fixed yet or incase if someone else got the same issue like me and you...
You will need both of these files:
1) A3500HV_A442_01_37_140920_ROW.7z
2) A modified Scatter File that enables the flashing of NVRAM+ the NVRAM File itself.
3) The SP Flash Tool.
I got all of them from the 4pda forum, and you can also search and download the 1st file which is an upgrade firmware with smaller size (312 MB) and i will attach the NVRAM scatter file and the NVRAM .. you will need the latest WinRAR version to etract it , and you can get the SP Flash tool easily from the same place you found the 1st file..
When you have all of them together in one folder then extract everything to its own folder name, and before anything else you need to take a full backup using Lenovo Assistant because the tablet will be reset, then open the SP Flash tool and point it to the scatter file from inside the 1st file's extracted folder (Not the NVRAM's one).
Check the "DA DL all with checksums" then click the Firmware Upgrade Option then click Download and at this point turn off the tablet and plug it using the USB cable WHILE HOLDING THE Volume Down Button and let the process finish until you see the big green check.
Power on the tablet and walk through the initial setup and at the home screen open the phone dialer and dial *#06* to make sure that the IMEI is still invalid or unknown, then turn the tablet off again.
Using the SP Flash tool select the Scatter file that i attached here with NVRAM in the same location then click Download, now plug in the tablet once more using the USB cable WHILE HOLDING THE Volume Down Button and let the process finish until you see the big green check.
That's it now just power on the tablet and check with the dialer again and you should already have the signal mark working.
Click to expand...
Click to collapse
Didn't work for me!

Hi
My device is Lenovo A3500-HV
I flashed Viper 7.1.2
but The call and messaging not working well !
Flashed any custom rom but not work
whats the wrong?

Stock OREO recovery.img

Hello my recovery is dead I need a stock recovery.img for Oreo. My device is PRA-LX1. I downloaded the PRA-LX1C432B322 Oreo firmware and extracted it with Huawei Firwmare Extractor but can't find recovery.img or boot.img. I tried to download the 4 files. No recovery.img, no boot.img. Where can I found those files to repair my bricked phone please.

Huawei Extractor
update.zip
update_full_namemod_hw_xx.zip
update.zip > UPDATE.APP > boot.img, system.img, recovery.img
update_full_namemod_hw_xx.zip > UPDATE.APP > Cust.img
With the Oreo firmware and the UPDATE.APP files extracted from them, errors are obtained during extraction. To avoid this, when you open the tool, go to the Setting tab and remove the checkmark from the "Verify header checksun" checkbox. Then proceed normally.

Notonlyeyes said:
Huawei Extractor
update.zip
update_full_namemod_hw_xx.zip
update.zip > UPDATE.APP > boot.img, system.img, recovery.img
update_full_namemod_hw_xx.zip > UPDATE.APP > Cust.img
With the Oreo firmware and the UPDATE.APP files extracted from them, errors are obtained during extraction. To avoid this, when you open the tool, go to the Setting tab and remove the checkmark from the "Verify header checksun" checkbox. Then proceed normally.
Click to expand...
Click to collapse
read the post please.
I can't find a oreo firmware of PRA-LX1 with boot.img and recovery.img.
I downloaded the following firmware: PRA-LX1C432B322 and PRA-LX1C33B321
You can find them here
They are Full-OTA.
I extracted update.zip and update_full.
I can't find boot.img and recovery.img, only system.img and cust.img.
I have a PRA-LX1.
I'm looking for a Oreo firmware which have boot.img and recovery.img.
I can't be more clear. Thanks

- I used Huawei Extractor 0.9.9.5 (setting no Verify header checksum)
- Firmware Oreo 322 pra-lx1 (UPDATE.APP from Update.zip Oreo 322)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Notonlyeyes said:
- I used Huawei Extractor 0.9.9.5 (setting no Verify header checksum)
- Firmware Oreo 322 pra-lx1 (UPDATE.APP from Update.zip Oreo 322)
Click to expand...
Click to collapse
It's not recovery.img or boot.img but I tried to flash with recovery_ramdisk.
That pass but still ERROR MODE when I try to boot into erecovery (Vol+ for 3s on the "unstrusted" screen).

please help me... it's been 4 days... urgent...

I just need a boot.img for oreo pra-lx1 please.......

any news

up

Anyone figure this out?? I am pulling my hair out. Oreo doesn't have a boot file? What am I supposed to do?
Any help would be SUPER appreciated. This day three of me working on this. I need a functioning phone, bad.

Hello,I recovered one very hard bricked huawei p8 lite by dc phoenix software. By this tool you can recover phone even if you have bricked bootloader. (Testpoint method is working!). If you want I can help you and send photos with pins which you must connect.

Hi!
So ERECOVERY_RAMDI.img and RECOVERY_RAMDI.img are the recoverys, Boot maybe is RAMDISK.img (not sure).
My advice is IF you have TWRP flash default ROM zip with it, boot in recovery after flash and do factory reset... And Pray!
.

In oreo there is no boot.img you need to flash ramdisk.img using fastboot for boot

Fixed:
Solved: to a certain degree with Hurupdater method.
Hi all. Unrooted my pra-lx2, removed twrp then did ota to emui8 and oreo. Rooted again with a ported twrp and supersu. All was fine until i flashed a dolby.zip without backing up. Phone bootloops. Still have twrp. Erecovery dont help update fails. Update.app in sd folder dont work.
Is there an uninstall zip for dolby. That may addist. Unless somrbody has a pra-lx2 twrp
backup

EMUI 9.1.0.210 for DUK-L09C432 (dload firmware)

DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
will it work on c675?
Sent from my 8 Pro using XDA Labs

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot

simika said:
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot
Click to expand...
Click to collapse
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards

thank you, I'm gonna try tonight ...
I'm afraid that recovery somehow "disappeared" lol.. when I update from oreo to pie and I changed it to twrp to install magisk! anyway tonight I try, if I get in fast boot I can install recovery (this time pie stick recovery, so I can update to 9.1..cuase if I try "dload" now it just reboot..)
OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards
Click to expand...
Click to collapse
Sent from my DUK-L09 using Tapatalk

OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though. (PLEASE READ AT BOTTOM.. " my solution " )
Regards
Click to expand...
Click to collapse
YES ! like that it worked !!! thank you
[EDIT]
so what i want to do is:
fastboot boot recovery.img BUT is not rebooting in recovery( and not loading it )
but it gives me this error: downloading "boot.img" so it's ignoring my command of booting with recovery.img
i've got stock recovery from UPDATE.app file of my actual rom ( 9.0.1.175 )
i didn't want to "install" the recovery cause i'm not sure it's the right file ... : (i've choosen recovery_ramdis.img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that the right one? in that case i can just install it .. cvause at the moment i can't reboot in any recovery !
[EDIT SOLUTION]
so since anyone could have my doubts ... here it is my " solution !
at the end i did install stock recovery ( which was RECOVERY_RAMDIS.img got from update.app and extracted by huawei update extractor)
fastboot flash recovery_ramdisk recovery_ramdis.img
than i use
fastboot reboot
and since i had the installation package already in my smartphone it went directly into UPDATING status ( through emui update program )
took less than 5 minutes to update to this latest EMUI 9.1.0.210
and 2/ 3 minutes for honor 8 pro to reboot.. and i had to change my underwear LOL !
at the moment i've lost root ... but probably i can get it back in the same way as i did with previous PIE !

LAST UPDATE ( check my other thread ) .. i could install EMUI 9.1.0.210 and ROOT It !
all working thank you @OldDroid for earlier support and doubts cleaning lol !
whoever wants to root EMUI 9.1.0.210 i made a step to step in Emui 9 with Root Honor 8 pro ( tested by myself ...root 100% working ! ) July 2019 thread!

hey
i have a duk l09c432b183 on emui 5.1
does this firmware works for me and how ?

Please I need your answer cause I don't want to brick my phone
So can someone tell me how to e