So i was using CM11s in my Xiaomi Redmi2 Prime. Then i flashed MIUI7 again which has lollipop. But then the mobile data, home button didnt worked. So i reflashed TWRP and installed a custom rom. The installation was succesful but after rebooting to system it got stuck in bootloop. Any other custom rom does same. Please help:crying:
check this fix Firmware section http://forum.xda-developers.com/showpost.php?p=64244264&postcount=3
Hello,
Please help me out guys
I tried for the 1st time to flash custom recovery TWRP - it worked.
Then, i immediately entered to TWRP and i tried to root my phone installing the supersu.zip. When i rebooted my phone - bootloop
In the end, I reflashed stock rom via ODIN but my phone still gets bootloop at SAMSUNG LOGO(NEVER HAPPENED BEFORE)
PS:If i try to enter stock recovery - first it appears "installing system update", then "no command" and then it enters the stock recovery, but nothing can solve the bootloop problem
please help
1.Why bootloop after rooting with the supersu.zip?Should i use the cfautoroot metod?
2.Why bootloop after reflashing stock rom?Never happened before!!!
Thanks!
What Phone have u got mate?
Sent from my Galaxy J5 using XDA Labs
J500F....
I think i managed to solve this...I was flashing the 1st update package .tar which was released for the J5 last summer
Flashing that - not working NOW, ALTHOUGH it worked a few months ago
Flashing .tar from SAMFIRMWARE - working!
But what about the root problem? Which way is the proper way to root your J500F 6.0.1 without bootloops&stuff
johnhux7 said:
What Phone have u got mate?
Sent from my Galaxy J5 using XDA Labs
Click to expand...
Click to collapse
Nothing works: supersu.zip, cf auto root.zip....
i only get bootloops
After flashing using TWRP you should always clear dalvik cache,
The first boot always take some time, 2-5 min,
Before flashing anything try to do a nandroid backup,
The supersu.zip method worked for me,
There is a detailed thread on xda j5 forum on how to upgrade/downgrade and root your device,
After using Odin to flash a ROM enter recovery and wipe data then wipe cache
Sent from my SM-J500H using XDA Labs
Update:
1. It seems it ONLY works to flash 6.0.1 AFTER flashing 5.1.1.(so i have to always repeat this double procedure)
Reflashing 6.0.1 over 6.0.1 - NOT WORKING
2. About root problem - damn, i still can't make it work. I will try your advices and let you know what happened,
Thanks!
saedlar93 said:
After flashing using TWRP you should always clear dalvik cache,
The first boot always take some time, 2-5 min,
Before flashing anything try to do a nandroid backup,
The supersu.zip method worked for me,
There is a detailed thread on xda j5 forum on how to upgrade/downgrade and root your device,
After using Odin to flash a ROM enter recovery and wipe data then wipe cache
Sent from my SM-J500H using XDA Labs
Click to expand...
Click to collapse
I just installed the Recovery then installed @zonik's performance ROM with all its files and my phone was rooted !
I'm using the J5FN
John
Sent from my Galaxy J5 using XDA Labs
Lawr3nce said:
Hello,
Please help me out guys
I tried for the 1st time to flash custom recovery TWRP - it worked.
Then, i immediately entered to TWRP and i tried to root my phone installing the supersu.zip. When i rebooted my phone - bootloop
In the end, I reflashed stock rom via ODIN but my phone still gets bootloop at SAMSUNG LOGO(NEVER HAPPENED BEFORE)
PS:If i try to enter stock recovery - first it appears "installing system update", then "no command" and then it enters the stock recovery, but nothing can solve the bootloop problem
please help
1.Why bootloop after rooting with the supersu.zip?Should i use the cfautoroot metod?
2.Why bootloop after reflashing stock rom?Never happened before!!!
Thanks!
Click to expand...
Click to collapse
I've seen your PM.
I don't really have any idea. But I have a suggestion, although I don't know if it will solve your problem. Backup your stuff from internal memory before. Try to wipe everything including internal memory (internalsd in TWRP recovery), then turn off your phone and re-flash stock rom.
Hello, @Lawr3nce I followed this tutorial by @rjrulz007 http://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904 to root my j500h, I downloaded the supersu.zip from this link http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Don't forget to backup your data before upgrading (you can use smart switch), after flashing using Odin go to recovery (stock recovery), wipe data/factory reset and wipe cache partition, this should solve the boot loop problem.
Before flashing the supersu zip file do a nandroid backup using TWRP (boot to TRRP, choose backup, select sdcard as save location then swipe to start backup. In case the flash of zip file failed choose restore and select the backup you did before, better than reflashing the whole ROM using Odin )
Sent from my SM-J500H using XDA Labs
Ok, thank you all for the help. Conclusions:
1. For some reason, it NEVER works to flash directly the 6.0.1...I always have to flash the 5.1.1 first, then the 6.0.1.
2. I will try that root procedure from the link .
I am very willing to root it because i want to remove many useless preinstalled bloatwares from my phone
(due to very low free space i can't even update my apps)
UPDATE: That procedure with that .zip WORKS! THANKS
So i was rooting my One Plus 2. While flashing the nee ROM i accidentally cleared the dalvik cache and the Internal storage too. this cleared my old ROM as well as new ROM. The phone went into bootloop. I somehow managed to flash OP2 Stock ROM
But now the problem is I cant reboot my phone into recovery, I tried flashing a new recovery but nothing happens. I lost my Volte update.
PLEASE HELP ?
atharva96 said:
So i was rooting my One Plus 2. While flashing the nee ROM i accidentally cleared the dalvik cache and the Internal storage too. this cleared my old ROM as well as new ROM. The phone went into bootloop. I somehow managed to flash OP2 Stock ROM
But now the problem is I cant reboot my phone into recovery, I tried flashing a new recovery but nothing happens. I lost my Volte update.
PLEASE HELP ?
Click to expand...
Click to collapse
If u have stock recovery then u shud load bootloader (fastboot) Redo the root procedure from scratch ,problem solbed ..
Sent from my ONE A2003 using Tapatalk
Hi. Can you please provide a link for the stock Rom? Did you copy it to your phone by sideload? Will it work on CM Recovery with unlocked bootloader? Mine always boot to CM recovery everytime I power on my phone.
Thank you!
I'm describing from start.
My Device: Lenovo A6000 Lo
1. After a long research I'm finally able to install TWRP 2.8.7.7 and then install ED300-CM13.0-UNOFFICIAL-wt86518-Build3.3.
2. Due to buggy problems I wanted to go back to Stock Rom- Kitkat
3. After searching on internet download stock rom Kraft-A6000_S042_151012_WC29 and trying to install it with TWRP, but failed with an error message.
3. Then I put stock recovery using pc. But stuck on recovery mode with Lenovo logo.
4. Again I have install TWRP, and then trying to install stock rom. It shows Installation success.
5. It seems the phone is now in KITKAT but continuously restarting.
6. I tried to go to recovery mode, but failed to do that and stuck on Lenovo logo as before.
7. For accessing the recovery, tried to change the recovery again with twrp. But still no go.
8. Again I put the stock recovery. It's a success this time. I have stock recovery.
9. Tried to wipe caches and install Stock rom & ED300 rom respectively. but faces install aborted message.
10. Finally I have wiped everything.
So any idea?
how to put back stock rom using stock recovery? or, how to put back twrp?
Thanks for reading..
My lenovo a6000+ just bricked and
When iam doing datafactory reset it shows unable to mount data so iam install twrp custom recovery and install supersu.zip bt flashing a custom rom it shows insufficeint storage space need 2.5 gb for flashing what is the reason please help me
xda5553 said:
My lenovo a6000+ just bricked and
When iam doing datafactory reset it shows unable to mount data so iam install twrp custom recovery and install supersu.zip bt flashing a custom rom it shows insufficeint storage space need 2.5 gb for flashing what is the reason please help me
Click to expand...
Click to collapse
Full wipe first before you flash.