Hardbricked VNS-L31 Mono-Sim. dload (update.app) not working -.- - Huawei P9 Lite Questions & Answers

Hello Guys and Nerds,
My P9 Lite is hardbricked. When i tried dload (i tried several firmwares) method there are 2 possible outcomes:
1. Huawei Logo and powered for Android for 5 Seconds, then blackscreen and nothing
2. Wrong Update
I tried to use dload method with 10 firmware versions. Nothing.
I cant get into fastboot and hard reset doesent do anything.
Its not an hardware problem but an software.
Before i had a Metriculus Rom with twrp but that doesent matter i think.

Related

How to unbrick huawei P8 Lite ALE-L21 (rooted)

How to Unbrick huawei P8 Lite ALE-L21
It was bricked after flashing custom recovery TWRP , and it is rooted …now phone is not booting ,stuck on huawei logo ,applied all methods ,hard reset etc..
Software installation via sd card three buttons installation is also getting failed
Software flashing through fastboot/adb is also not working at all just because it was rooted .
have tried
B170
B050
B120
How can I overcome this problem please help me
....
Same problem
Asad-143007 said:
How to Unbrick huawei P8 Lite ALE-L21
It was bricked after flashing custom recovery TWRP , and it is rooted …now phone is not booting ,stuck on huawei logo ,applied all methods ,hard reset etc..
Software installation via sd card three buttons installation is also getting failed
Software flashing through fastboot/adb is also not working at all just because it was rooted .
have tried
B170
B050
B120
How can I overcome this problem please help me
Click to expand...
Click to collapse
fastboot flashing is root indipendent, needs unlocked bootloader.
how did u get root permission?
If you get here because you have bricked your p8 lite, it's possible to revive it. Did mine without even factory reset. This might help (when you get there,, type the flash commands in small letters instead)
http://forum.xda-developers.com/showpost.php?p=66823156&postcount=15

P8 Lite (ALE-L21) bricked

Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^
Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards
Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^

Huawei P9 lite (VNS-L21) Bricked after flashing. No fastboot.

Hello!
I have (or had?) a huawei p9 lite (VNS-L21) which had the problem to frequently restart or simply didn't want to pass the boot (huawei) screen. I tried to reinstall the same firmware and it didn't helped so i tried another version and after a successful flashing via Chimera Tool, now the phone does nothing. Can't power up, can't get into fastboot, my pc doesnt seem to see it at all.
The only solutions i read here was via fastboot which i do not have at the moment.
Do you have any suggestion?
Thank you in advance!

Need help with Getting package info failed (Huawei Nova Plus)

Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution
Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom

Honor 8 lite 2017 build no. pra-la1-c185b220 bricked..

Hello,
My honor 8 lite was bricked recently and I tried almost every method to unlock but unfortunately nothing worked. I have my bootloader key also and dc phoenix for 72 hours but nothing working my way. Tried almost every update file available for my build and nothing worked. Help required from genius developers of XDA. My region is Pakistan.
Please anyone suggest me the correct firmware link and the whole procedure otherwise my money will be wasted.. bootloader is unlocked and frp locked..
I'm on it via PM, we'll post result once repaired with method used.
He's not replying now.. anyone else can help?
I replied 10 minutes ago..
Sorry I got it now
So, while your downloading firmwares, i'll post what I told you on PM.
"
Ok, so I think you did not rebrand your phone:
-You installed wrong region with FF (in fact right region but for huawei variant not honor variant). So your phone does not boot to normal mode anymore, it's normal.
-You then flashed different firmware via DC-Phoenix.
These steps alone does not rebrand your phone...
I think your honor 8 lite c185 honor variant is LA1 or L21HN (and not the huawei gr3 2017 variant).
1) Download this oreo service repair firmware 8.0.0.363(C185)*:
http://androidhost.ru/9dg
To install, you will have to boot in 'firmware mode' aka dload mode, and used an exfat formatted SDcard or USB-OTG. There is 3 flashes to do ; instructions are inside.
2)If working with this oreo service repair firmware, we'll then unlock Bootloader and bootloader's FRP, then we'll use Normal ota or twrp+HuRUpdater to update to 8.0.0.382(C185) with these 3 files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v172010/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...10/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/..._meafnaf/update_full_PRA-L21HN_hw_meafnaf.zip[/QUOTE]
3)OREO service repair may not work if you are still with nougat partition scheme,
if so you'll have to download a NOUGAT service repair : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=53498
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Honor 8 lite back alive again with oreo..
But I am going warn everyone who's new to all of this.. Don't try to update by yourself.. Get guidence from someone here and then try to update your phone only if you have bootloader unlocked and frp too..
oslo83 said:
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Click to expand...
Click to collapse
Thank you very much for all your support..

Categories

Resources