Hi,
I read a lot in this forum and in other sites about the possibility to enable Camera2API on our fantastic MINote3 phone but, at the end, I don't understand if is possible to enable che Camera2API WITHOUT root the device. Can someone give me a final answer about this question ?
PS
If the answere is "yes, is possible without root", then other questions are:
is ok this method https://forum.xda-developers.com/mi-a1/how-to/tool-google-camera-root-magisk-enable-t3747585/page10 (see post 98) or is only ok for MI A1 ? Are there other methods ?
supershi said:
Hi,
I read a lot in this forum and in other sites about the possibility to enable Camera2API on our fantastic MINote3 phone but, at the end, I don't understand if is possible to enable che Camera2API WITHOUT root the device. Can someone give me a final answer about this question ?
?
Click to expand...
Click to collapse
If you can install TWRP you can enable it without rooting your system, as TWRP has root priveliges while it is running.
Here you can find a zip file to flash in TWRP to enable it.
I have used it.
Read the whole thread:
https://xiaomi.eu/community/threads/google-camera-for-mi-max-2.42976/
cobben said:
If you can install TWRP you can enable it without rooting your system, as TWRP has root priveliges while it is running.
Here you can find a zip file to flash in TWRP to enable it.
I have used it.
Read the whole thread:
https://xiaomi.eu/community/threads/google-camera-for-mi-max-2.42976/
Click to expand...
Click to collapse
But is there some that test this procedure on MiNote3 ? (in the link I read that run on Mi Max 2)
supershi said:
But is there some that test this procedure on MiNote3 ? (in the link I read that run on Mi Max 2)
Click to expand...
Click to collapse
Yes, I have done it myself on Mi Note 3 running the latest Xiaomi.eu weekly 8.4.26.
I have also done it on Mi Max Prime, Mi Mix, and Mi Note 2.
If you had read the whole thread you would have seen my posts.
cobben said:
Yes, I have done it myself on Mi Note 3 running the latest Xiaomi.eu weekly 8.4.26.
I have also done it on Mi Max Prime, Mi Mix, and Mi Note 2.
If you had read the whole thread you would have seen my posts.
Click to expand...
Click to collapse
Thank you soo much for all your informations.
Only one question: is necessary to flash the twrp on the device or is enough to load the twrp via the command "fastboot boot twrp.img" ?
supershi said:
Thank you soo much for all your informations.
Only one question: is necessary to flash the twrp on the device or is enough to load the twrp via the command "fastboot boot twrp.img" ?
Click to expand...
Click to collapse
It "should" work to only boot into TWRP without flashing it.
That is if you do not want to install TWRP, just use it once.
The next time you reboot, your new TWRP will be gone again.
I have not tried this myself.
I will try the procedure where I only boot twrp (without flash it) then will try to enable camera2api parameters on built.prop and also change permission of this file (with su permission).
I will update this thread with a feedback about the operation
Hi,
finally I enable Camera2API on Mi Note 3 (with last official global rom) WITHOUT root the device. These are my tasks:
- unlock the bootloader (with MI official utility) and lost all my data
- flash TWRP Red Wolf then run it and, to give the right access to the partitions, I wipe and format my device from the TWRP menu and reboot the device
- Then, from TWRP, I install "HZQ_MIUI_Camera_Mod_CAMERA2_API_170824.zip"
Thanks Cobben for the good informations
PS
Now I use GCam5.1.018-Arnova8G2-V1.2.apk and run very well. The quality of the night shoots is better a lot respect xiaomi default camera
I add that with gcam the videos are better that xiaomi cam:
- less nois
- better color
- much details
Then, at the end, gcam become the main camera app on my device (and I will use xiaomi cam only for boken effect or camera zoom)
supershi said:
I add that with gcam the videos are better that xiaomi cam:
- less nois
- better color
- much details
Then, at the end, gcam become the main camera app on my device (and I will use xiaomi cam only for boken effect or camera zoom)
Click to expand...
Click to collapse
Hi, I installed the Xiaomi.eu rom and installed also the Google camera (v.7.9.4 - everything is working correctly even the Slow motion). I can say that the Miui camera is on par with Google camera or a level down. The Miui camera uses the algorithm in the open-source Gcam app. You can try the Xiaomi.eu rom which is based on China rom - it is great.
In my case instead I use the last global 9.5.3.0 and gcam is the best
Related
[INDEX] REDMI NOTE 3 PRO (Snapdragon 650) ==> LIST of ROMs -=- [#UPDATES thread 2]
Hi All,
Note: In most of the cases, I will try to post the forum links only and not direct links.
Thank the developers, who have contributed their valuable time for our fun and entertainment ...
Click to expand...
Click to collapse
This thread will be having the list of all custom ROMs and any other Mods required for RN3 (SD Version).
**VIP KERNEL SOURCE is here: CLICK HERE
Below are the list of Custom ROMS...
STOCK ROMs:
Developers ROM (Version 6.3.18): Click here
Stable ROM - GLOBAL (Version: V7.2.3.LHOMICL) : Click here
Stable ROM - CHINA (Version: 7.2) : Click here
CUSTOM ROMs:
Qualcomm FACTORY ROM - AOSP (Leaked with Dev Apps): Click here
CM12 - Cynogenmod: Click here
CM13 - Cynogenmod: Click here
OTAs:
Version 7.2.3 (190+MB): Click Here
NOTE: Help me guys to update this thread regularly and Post any missing information to add it here...
OFFICIAL TWRP:
Latest TWRP link: Click here
Haa haa...
Waiting for New Kernels to be placed in this section...
TOOLKIT (TWRP and others):
If u want to be with MIUI and want TWRP, please install TWRP boot image specific to your version. If want custom rom, I dont think, it matters. Anyway, Install this app and follow the steps. Link is : https://drive.google.com/file/d/0B0pkb-PnDIp8Rk1TdzhmUnZGdnc/view
Make FLASHABLE OTA via TWRP:
Here is the link for the Guide: Click Here
TWRP Repository: Click here
Modded MBN file (Responsbile for Locking Bootloader): Click here
Mislenious
Bootloader Unlocking - 100% PERFECT:
100% Working Bootloader unlocking solution for Xiaomi Redmi Note 3 Pro. You dont even need confirmation from Xiomi. You can UNLOCK / RE-LOCK Bootloader at any time...
Trust me, I have personally tested and unlocked my device. Follow steps mentioned over here : Click here
Conclusion : Dont wait for Xiamo to get the permission to unlock ur device. Follow above method. Altough u get permission, at least 95% chances that Mi Unlock application fails. I was trying with Mi unlock app for days and even following up in mi forums, with no working solution. They simply said, try it after a week... So, I dont want some one to waste their valuable time like me...
Reserved
Qualcom factory rom aren't an Custom. Modify your thread
Inviato dal mio kenzo utilizzando Tapatalk
We Really REALLY !!! need a Separate section for this device
https://github.com/kenzo-dev
now the source is released, this repo needs to be updated.
Add this ROM please
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Updated Working Bootloader Unlock process ie without Mi permission... I have done it and it works pretty fine..
Sorry but,just for info,how can I relock my bootloader?
GiovanniArpino said:
Sorry but,just for info,how can I relock my bootloader?
Click to expand...
Click to collapse
There are two ways,
1. Flashing Fastboot rom from mi forum will relock your Boot loader.
2. From the above mentioned tutorial, backup the original "fastboot flash aboot emmc_appsboot.mbn" file and it will relock the bootlader. optionally, you can try "fastboot oem lock" command as well.
srihari210 said:
There are two ways,
1. Flashing Fastboot rom from mi forum will relock your Boot loader.
2. From the above mentioned tutorial, backup the original "fastboot flash aboot emmc_appsboot.mbn" file and it will relock the bootlader. optionally, you can try "fastboot oem lock" command as well.
Click to expand...
Click to collapse
Thanks!
Sent from my Redmi Note 3 using XDA-Developers mobile app
srihari210 said:
Updated Working Bootloader Unlock process ie without Mi permission... I have done it and it works pretty fine..
Click to expand...
Click to collapse
Hi Can you please share the perfect process to unlock bootloader there are many unlock process threads are here..Share Process and Link
Anands3 said:
Hi Can you please share the perfect process to unlock bootloader there are many unlock process threads are here..Share Process and Link
Click to expand...
Click to collapse
On POST 3, I have given the link to the complete process and it works perfectly.
So, barely, its like, flashing 7.1.7 or 7.1.8 version with CHANGED MBN file. (MBN file is the main file which will allow unlocking from Fastboot command)
After flashing with changed MBN file, run the FASTBOOK OEM UNLOCK_GO command to unlock the file.
Then, u can check FASTBOOT OEM DEVICE-INFO to check the status. Then, flash other OS like CM12/13 or Qualcommn rom.
If u want MIUI os then, use FASTBOOT command to flash TWRP and reboot to TWRP. Then, download RECOVERY ZIP file and with WINZIP replace MBN and Changed BOOTLOADER (TWRP) file and then flash that file in TWRP. These steps are like an overview of the process, if u want more info, u can google it or check, MI forum
Hey guys I'm thinking of buying this phone the 32gb/3gb SD650 version to be specific and it's nice it's getting a custom roms just like the mtk version. How's the CM12/13 roms as for now overall? Stability, battery you know.. are these roms suitable for daily use? Btw now I have a K3 Note.
Custom ROMs are at very early stage and are not suitable for daily usage. As the kernel drivers are already out, we hope stable version will come soon... Qualcomm factory ROM is stable but feels slow...
Subbed and rated. Thanks for updating ^^
Direct Link to OTA for 7.2.3 is updated in first post. If anyone didnot get the OTA, download 190+MB zip file and put zip file in folder: /internalstorage/downloaded_rom/ Then, updater to update to new version of stock.
srihari210 said:
Dont wait for Xiamo to get the permission to unlock ur device. Follow above method. Altough u get permission, at least 95% chances that Mi Unlock application fails. I was trying with Mi unlock app for days and even following up in mi forums, with no working solution. They simply said, try it after a week... So, I dont want some one to waste their valuable time like me... [/HIDE]
Click to expand...
Click to collapse
I thought if you use this method and then Flash any MIUI ROM you get Brick ?
syl0n said:
I thought if you use this method and then Flash any MIUI ROM you get Brick ?
Click to expand...
Click to collapse
Nope, u ll not brick your phone. I have done that and it works flawlessly... I have unlocked bootloader and installed Qualcomm and CM12 roms and again flashed stock OTA via MI updater app. I didnt have any problem.
Although its not for novice users, in most of the cases, hardware bricking a phone is almost not possible, unless, u try to play directly with hardware. And, softbrick will easily be recoverable(Well u need a PC and drivers for sure)... its just like, when u r not able to run the OS in your phone, then, repair shop guy will just flash the stock rom and will give it back to you.... Just, thats what we are doing with MI updater. As mentioned earlier, this may not be for normal user...
Anyway, Thread 2 updated with new tutorial on How to flash OTAs without relocking your phone...
Hi,
guess this will be more of a review as it is hard to say which feature i like BEST:
Got my MAX 3gb/64gb (helium) delievered yesterday. Since it came with the 7.3 MIUI first thing i had to do was read up on how to install the MIUI8 China dev rom to the device. After a bit of fiddling and translating chinese / indian websites i came up with a workable solution, even with the bootloader locked. So since yesterday evening i got MIUI8 6.6.23 running on the device - weeded out some apps i did not understand (chinese) and installed Play Store.
So far i must say - this phone is glorious. MIUI8 is fast and seemingly stable, i did not come across any big bugs and there doesnt even seem to be the typical micro-stuttering. Im really happy i bought the phone and hoping there will be a multilanguage (i.e. german) MIUI8 for it. For now im perfectly good with the Dev Rom and english localisation.
Thanks Xiaomi!
To anybody interested - flashing the China Development ROM (MIUI 8 6.6.23) with the locked bootloader was not exactly easy, here is how to:
- get the rom image from here: http://en.miui.com/thread-299033-1-1.html (be sure to download the Mi Max Pro fastboot image - 1418mb)
- get MiFlash Beta from here: http://xiaomitips.com/download/new-miflash-beta-one-click-install-miui-fastboot-rom/
- extract tgz fastboot image - keep folder structure!
- enable developer options -> usb debugging in additional settings then turn off phone
- boot phone into EDL mode (phone off, press simultaneously vol+&vol- then connect usb cable)
- open miflash beta - there should be an entry with "id 1" and "device" something like "COM10" in the bottom table now - SEE ATTACHED SCREENSHOTS!
- select the folder where extracted image is located
- tick "clean all" in the bottom right
- hit flash
- enjoy.
First of all, thank you for sharing this. I went step by step (vol up and down didn't work for me, tried power and vol up and device didn't show up in fast boot, did vol down and power and it showed up) then I flashed the image and it successfully flashed, when the device booted it still showed the 7.4.16 global stable Rom the vendor installed : /, I did it again and the same thing, the rom didn't change. could you please help/?
Sorry, I followed the steps exactly as described and it worked out perfectly, thank you very much, its just that when I pressed vol + and - I didn't see anything on the screen so I thought it wasn't working, miui 8 is nice indeed, could you explain how you installed the play store, the one on the Mi store is crashing on me.
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
g_BonE said:
Hi,
Got my MAX 3gb/64gb (helium) delievered yesterday.
Click to expand...
Click to collapse
where you buy the 64 GB Mi Max ?
Greets, Peter
bought it through nis-store.com had it delivered 3 days later. can recommend. they ship with DHL.
Tapatalk on Mi Max
Is it possibile to get it rooted?
e753 said:
Is it possibile to get it rooted?
Click to expand...
Click to collapse
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
memooffon said:
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
Click to expand...
Click to collapse
6.6.23 is older (june 23)
6.7.7 is the newest sofar (July 7)
I use the weekly multi rom on my MI Max since its better tuned with translations and the china apps that I don't use are removed
https://xiaomi.eu/community/threads/6-7-7-11.32639/
the process for installing the new Version does not change with the newer miui8 6.7.7 so you're good to go with the same Instructions from OP.
Meanwhile on my Max I have boot loader unlocked and root. Works flawlessly with the new MIUI weekly Releases.
Tapatalk on Mi Max
I am on China stable rom
Already unlocked bootloader
Does official twrp hydrogen work properly with helium model?
nijel8 said:
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Click to expand...
Click to collapse
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
s2k7 said:
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
Click to expand...
Click to collapse
I have hydrogen but reading the forums people are using same TWRP for helium. Just read XDA and official MIUI forums...
g_BonE said:
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
Click to expand...
Click to collapse
Would you mind pointing that thread where it's explained?
Thanks a lot for you experience sharing,
I was wondering maybe you solved this: i can't get whatsapp to run on this rom, even with all permissions given, whatapps and skype cant access my contacts. I got my contacts on the system using the old google installer apk which worked wonders except now i can't get past the looking for backup screen in whatsapp.
If anyone has ideas pls let me know and in the meanwhile i will try to flash other roms to see if one works..
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
pocketjose said:
Would you mind pointing that thread where it's explained?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=UgdsvrtFji0 follow that! step by step
ispeedca said:
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
Click to expand...
Click to collapse
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
pocketjose said:
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
Click to expand...
Click to collapse
I can't tell you for sure but i think you have to use the instructions from the muiu site if you want the lastest dev rom.
1- I used OP instructions and links to install muiu 8
2- updated to last china dev rom following muiu site instructions.
3- installed all gapps stuff
PS if you want to ROOT, do this between 2 and 3: (unlocked boot loader)
1-Download SuperSu to root Xiaomi Mi Max and copy it to your phone sd card from this site: http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
2-Download xiaomi twrp flasher and use it to flash from: http://forum.xda-developers.com/mi-max/development/tool-xiaomi-twrp-flasher-mauronofrio-win-t3405207
3-Follow instructions from step 9 : http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
Last thing im playing with trying to activate LTE bands on the phone. If anyone can help for that, i can't get the drivers to install propertly
Mi 6x and MI A2 have same hardware but when we flash mi 6x MIUI rom to Mi A2 camera does not works properly(Enhance low light Option makes it stop ) But the camera modules are identical , basically I am talking about the global variant . Here is the twist xiaomi implemented same camera module but they set some hidden code number in the hardware module so that these module can be matched with our IMEI and The image processing system can understand that it is Mi 6x or mi A2 !! The idea is not quite enough to stop us !!!! WTF is the need of this , It took 10 days to figure it out .
So every thing is already fixed in every miui rom nothing to patch or replace.We can easily bypass or fool the image processing system.
Mi 6X's Code name is "wayne" we can change it "whyred" it is the code name of redmi note 5.
What we need
- Root
- A root file manager[ Xplore, Ex ]
- A working Brain.
steps
-Go to "System/etc/device_features"
-Rename "wayne.xml" to "whyred.xml"
-Now Open System/build.prop
-Now find out the line "ro.product.device=wayne"
-Change it to "ro.product.device=whyred"
-Now make a reboot
Yes you got a fully working camera!!!
Camera fix for indian variant https://forum.xda-developers.com/mi-a2/how-to/miui-10-camera-fix-t3862786
Yeah it works.
Is there a difference in photo quality?
ozankardes said:
Yeah it works.
Is there a difference in photo quality?
Click to expand...
Click to collapse
No It's completely fine.
IjazCI said:
What about device with black camera (blank )error ?
Click to expand...
Click to collapse
You can try this method . I don't have the indian varient so cant say anything about this .
ARNOB XENON said:
You can try this method . I don't have the indian varient so cant say anything about this .
Click to expand...
Click to collapse
woow man, thank you. I will definitely be converted to MI 6X:victory:
powar19 said:
woow man, thank you. I will definitely be converted to MI 6X:victory:
Click to expand...
Click to collapse
Does it works on Indian variant
does it work in global varient and of course wont trigger arb?
hackerh2 said:
Does it works on Indian variant
Click to expand...
Click to collapse
I don't know. I'm have global version mi a2 and this method work good
Problem with Indian Variant!!
ARNOB XENON said:
Mi 6x and MI A2 have same hardware but when we flash mi 6x MIUI rom to Mi A2 camera does not works properly(Enhance low light Option makes it stop ) But the camera modules are identical , basically I am talking about the global variant . Here is the twist xiaomi implemented same camera module but they set some hidden code number in the hardware module so that these module can be matched with our IMEI and The image processing system can understand that it is Mi 6x or mi A2 !! The idea is not quite enough to stop us !!!! WTF is the need of this , It took 10 days to figure it out .
So every thing is already fixed in every miui rom nothing to patch or replace.We can easily bypass or fool the image processing system.
Mi 6X's Code name is "wayne" we can change it "whyred" it is the code name of redmi note 5.
What we need
- Root
- A root file manager[ Xplore, Ex ]
- A working Brain.
steps
-Go to "System/etc/device_features"
-Rename "wayne.xml" to "whyred.xml"
-Now Open System/build.prop
-Now find out the line "ro.product.device=wayne"
-Change it to "ro.product.device=whyred"
-Now make a reboot
Yes you got a fully working camera!!!
Click to expand...
Click to collapse
I have Mi A2 converted to Mi6X.
With camera it says "Cant connect to camera".
Since mine is an Indian variant, your guide is not working!!
Any solution to the Indian variant?
Thanks
shashank1 said:
I have Mi A2 converted to Mi6X.
With camera it says "Cant connect to camera".
Since mine is an Indian variant, your guide is not working!!
Any solution to the Indian variant?
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/miui-10-camera-fix-t3862786 here you go.
IjazCI said:
What about device with black camera (blank )error ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/miui-10-camera-fix-t3862786
ARNOB XENON said:
Mi 6x and MI A2 have same hardware but when we flash mi 6x MIUI rom to Mi A2 camera does not works properly(Enhance low light Option makes it stop ) But the camera modules are identical , basically I am talking about the global variant . Here is the twist xiaomi implemented same camera module but they set some hidden code number in the hardware module so that these module can be matched with our IMEI and The image processing system can understand that it is Mi 6x or mi A2 !! The idea is not quite enough to stop us !!!! WTF is the need of this , It took 10 days to figure it out .
So every thing is already fixed in every miui rom nothing to patch or replace.We can easily bypass or fool the image processing system.
Mi 6X's Code name is "wayne" we can change it "whyred" it is the code name of redmi note 5.
What we need
- Root
- A root file manager[ Xplore, Ex ]
- A working Brain.
steps
-Go to "System/etc/device_features"
-Rename "wayne.xml" to "whyred.xml"
-Now Open System/build.prop
-Now find out the line "ro.product.device=wayne"
-Change it to "ro.product.device=whyred"
-Now make a reboot
Yes you got a fully working camera!!!
Camera fix for indian varianthttps://forum.xda-developers.com/mi-a2/how-to/miui-10-camera-fix-t3862786
Click to expand...
Click to collapse
Close all converting threads. ASAP
Manish4586 said:
Close all converting threads. ASAP
Click to expand...
Click to collapse
Who are you telling me to close all converting threads???
ARNOB XENON said:
Mi 6x and MI A2 have same hardware but when we flash mi 6x MIUI rom to Mi A2 camera does not works properly(Enhance low light Option makes it stop ) But the camera modules are identical , basically I am talking about the global variant . Here is the twist xiaomi implemented same camera module but they set some hidden code number in the hardware module so that these module can be matched with our IMEI and The image processing system can understand that it is Mi 6x or mi A2 !! The idea is not quite enough to stop us !!!! WTF is the need of this , It took 10 days to figure it out .
So every thing is already fixed in every miui rom nothing to patch or replace.We can easily bypass or fool the image processing system.
Mi 6X's Code name is "wayne" we can change it "whyred" it is the code name of redmi note 5.
What we need
- Root
- A root file manager[ Xplore, Ex ]
- A working Brain.
steps
-Go to "System/etc/device_features"
-Rename "wayne.xml" to "whyred.xml"
-Now Open System/build.prop
-Now find out the line "ro.product.device=wayne"
-Change it to "ro.product.device=whyred"
-Now make a reboot
Yes you got a fully working camera!!!
Camera fix for indian variant https://forum.xda-developers.com/mi-a2/how-to/miui-10-camera-fix-t3862786
Click to expand...
Click to collapse
Hello,
I converted to 6X from A2. On MIUI 9, the camera worked, I never tried MIUI 10. Is the problem only with MIUI 10? I have global, 4/64 variant.
Thanks.
Is front camera working?
Manish4586 said:
Close all converting threads. ASAP
Click to expand...
Click to collapse
Why?!
It works for me. Thanks
Manish4586 said:
Close all converting threads. ASAP
Click to expand...
Click to collapse
Bro, who are you anyway to say this? I don't think you should say this though. This is wrong.
My A2 Front camera not working. I Flashed Stock Firmware by Mi Flash Tool and also Manually by CMD. but front camera not working. Sometime workes for 1 5-30 minute. so how to fix it?
How to Root A2 Converted to Mi6X Wayne (MIUI10) ?
Hi all I have finally got the Pixel experience rom booted on my mi max 3 with the fixes from this post https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708
To do is it takes a while but is worth it latest update 11/01/2019 is stable
ok here we go
first you need to flash or factory reset your phone on the latest china beta so as of today its 9.1.10
next downlaod the xiaomi.eu rom latest rom whatever it is
https://xiaomi.eu/community/threads/9-1-10.48651/
download the pixel rom for ARM64 A ONLY
https://github.com/EnesSastim/Downloads/releases THIS IS THE ACTUAL WEBSITE
HERES THE DIRECT ROM LINK
https://github.com/EnesSastim/Downl...A-2019-11-01/PixelExperienceP-arm64-aonly.zip
Magisk if you need it
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
patches and fixes for brightness etc
https://forum.xda-developers.com/attachment.php?attachmentid=4680047&d=1546632878
ALL IN ONE TOOL USED TO FLASH TWRP
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
OK HERES HOW TO INSTALL IT
FIRST COPY ALL FILES ABOVE TO YOUR PHONE THEN FOLLOW THIS GUIDE
Flash the original China dev via miflash (no lock Bootloader option tick). Because the original China dev Fastboot Rom recreate the original Partitions.
Start the system until welcome Screen(don't know why but it was one solution)
Then in Fastboot mode: Fastboot format userdata
Then flash newest original twrp in Fastboot. USING THE ALL IN ONE TOOL
Then install xiaomi.eu
Start system until welcome screen.
Reboot to recovery
Factory reset
Reboot to recovery
Install PixelExperienceP-arm64-aonly.IMG FROM 11/01/2019
Reboot recovery
Install magisk 18.0
REBOOT RECOVERY AGAIN
MOUNT AND MAKE SURE VENDOR IS MOUNTED
NOW FLASH THE ZIP FILE FOR THE FIXES
Reboot to system
HOPEFULLY IN ABOUT 5 MINUTES THE PHONE SHOULD BOOT UP ENJOY
:good:
Mistake
will the exFat SD sard could be read?
jacklau2000 said:
will the exFat SD sard could be read?
Click to expand...
Click to collapse
Yes, mine is working 100% fine, keep all my Maps and Spotify data on it.
Thanks, I will try it later.
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
nijel8 said:
What is this thread doing here...!? Did you build/developed anything! At least you could've integrated all "fixes" in a single install package... Otherwise what's different from other guides we already have.
Click to expand...
Click to collapse
Wrong section ! Move it to Guide one
Theseusperse said:
because in China they have 3 different Mi Max 3 variants: Nitrogen, Helium and Hydrogen, and the first firmware on the Chinese download page is to the 32GB Hydrogen Mi Max 3, which will actually work!
Click to expand...
Click to collapse
What? Mi Max 3 has just "nitrogen" codename.
"helium" and "hydrogen" are just Mi Max 1! First one is equipped with Snapdragon 652, second one is equipped with Snapdragon 650. I guess that if you'll flash helium/hydrogen firmware on nitrogen you'll get bricked
@moderator @admin @engloa @MikeChannon
Please MOVE this thread to its correct place: https://forum.xda-developers.com/mi-max-3/how-to
This is not an original developing/ROM Building as @nijel8 said...just a copy of this description:
china rom
where do i find thee china tgz rom for miflash? cant find it anywhere...
meruelodaniel said:
where do i find thee china tgz rom for miflash? cant find it anywhere...
Click to expand...
Click to collapse
:silly: You can find it on the Internet
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Totally agree with you
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
SerikKr said:
What happens if I don't install Chinese ROM, and flash this Pixel Experience ROM on Xiaomi.eu right away?
Click to expand...
Click to collapse
I do this and it's ok, but you'll see, it's not perfect
Shuyin10 said:
Have try a lot of GSI rom on Max 3 and it's never smooth and stable like Miui (Xiaomi.eu for me)....wait a true custom rom
Click to expand...
Click to collapse
I agree, they all have too many issues. It's been 7 months now and we don't have any custom ROM's despite this being one of the most popular Xiaomi phones (according to their offical forums and rom download stats), so why the hell is nooone developing for it? At this rate the Mi Max 4 will be out before the we even have a single native custom ROM.
I to was pissed off because there are no custom romI order another phone, not xiaomi and when i receive it will sell my mi max 3.I am not sure that will try xiaomi phones again..
I'm currently using Miui PRO - latest version and it is Android 9 - working flawlessly, no errors found so far and battery is pretty amazing Go on and try it guys, it's the best thing and it is regularly updated. Not changing my Mi Max 3 for anything so far. The russians have done amazing job with this rom
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
shingers5 said:
Havoc 2.0 is epic on this phone guys. I have been using for over a month now and its solid. Few issues were BT audio and adaptive brightness for which there are fixes. I using it right now and its solid and as stable as can be
Click to expand...
Click to collapse
is wifi hotspot and google cam working as well?
can you confirm when you free please
also did you wipe system while installing that gsi image?
XIAOMI.EU MIUI
Xiaomi.eu released their version of MIUI for Redmi K30 Pro / Zoom Edition / Poco F2 Pro
Weekly Beta and Stable are based on Android 12
Both Weekly Beta and Stable are based on China Rom
Xiaomi.eu forums: here
INFORMATION & FEATURES
So why is this rom important for us?
The answer is very simple, Its a good replacement for a global rom.
This marks the beginning of Redmi K30 Pro / Zoom Edition / Poco F2 Pro custom roms development and I hope that we are going to get more roms from the community and developers.
Ill be updating the thread with every new weekly release for Redmi K30 Pro / Zoom Edition / Poco F2 Pro and with every stable release.
Have a great day and happy flashing
Features of the EU ROM:
Based on China Stable / Weekly builds
3way reboot menu (in dev settings)
MIUI Contacts and Dialer
Removed ads in MIUI system apps
MIUI Dialer and Messages apps
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures for all devices
AI preloading option in MIUI Lab for all devices
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added GSMalphabet into SMS app options
SafetyNet passed by default (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Widevine L1 (for supported devices)
And more, and more made by our 10 years MIUI mods experience.
INSTALLATION & UPDATE
Installation Instructions:
- Make sure your bootloader is unlocked!
- Boot into stock rom and copy Xiaomi EU rom to root of internal storage.
- Boot to TWRP recovery
- Mount all the possible partitions
- Install rom
- Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE
- Reboot your device.
- You'll be rebooted into twrp. Now format data and reboot
Update Instructions:
- Boot to TWRP recovery mode
- Mount all the possible partitions
- Wipe Cache, dalvik
- Using MTP or OTG copy the new rom to your device
- Flash the new rom
- Wipe cache and dalvik
- Reboot
DOWNLOADS
Weekly Beta
NO LONGER UPDATED!
[22.7.19][Android 12]
CHANGELOG
App vault
Fix - Incorrect date format on top of the main App vault page
Cloud backup
Fix - Cloud backup was not working in some cases
Updater
Fix - ROM installation wasn't starting automatically after reboot to recovery
System
Fix - Slow charging in certain scenarios
22.7.19 Download: here | General Beta Download: here
---------------------------------
Stable
When switching between Weekly and Stable roms, you must Format Data
[V13.0.5.0.SJKCNXM][Android 12]
V13.0.5.0 Download: here | General Stable Download: here
PLEASE REPORT ANY BUGS ON THE BUGS SECTION ON THE XIAOMI.EU FORUMS AND NOT HERE!! IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE.
ALL THE CREDITS GO TO XIAOMI.EU TEAM​
Screenshots
You can ask for other screenshots in the comments and ill try to add them as well
More screenshots and any thing asked to be uploaded will be in the album: Coming Soon​
reserved #2
Coming Soon: FAQ
Now some words from me,
Hi I am Omer, I own a Mi Max 3 and Huawei Mate 20 X.
today I ordered a Redmi K30 Pro Zoom Edition and therefore I am going to be a part of this community.
I am going to update this thread with any upcoming update, just like I did for Mi Max 3 thread.
I am also going to buy a Black Shark 3 Pro for daily use but that phone cant be unlocked.
I hope you enjoy your phones!
if you have any questions feel free to ask!
by the way:
In order to improve the communication performance and stability of the mobile phone, will be upgraded the Qualcomm baseline - Redmi K30 Pro will be suspended from May 25. It is expected to be suspended for about three weeks. This upgrade does not affect the stable version.
Great job!!!
Thanks for doing this like it should be done. I tried but my tutorial is **** compared to this. Cheers ?
Okay, my Bootloader is unlocked and i did the install the current (may 24th) beta version of the xiaomi.eu ROM.
The installation was a bit rough around the edges: The currently available TWRP comes from a chinese developer and starts with chinese language. You can't read a thing.
Fortunately, i have used twrp so often already that i remembered how to change the language without having to read the buttons.
Having installed TWRP via fastboot, i booted into it, changed language and formatted the data partition under "Wipe". Then i connected my pc, transferred the ROM file to the phone and installed it.
I was a bit disappointed that my dear F2 changed it's personality immediately: it identified as Redmi K30 Pro from the first boot on. I know this "problem" from my Mi 9T Pro where the xiaomi.eu ROM changes its name to Redmi K20 Pro, but there was a patch in xiaomi.eu's K20 Pro forum that reversed this effect when flashed via TWRP. This kind of patch does not exist for the Poco F2 as of now, so i guess i'll have to live with it.
Other than that, all seem to run well. First boot took a couple of minutes, but Installation went smoothly and phone is restoring my configuration and installing all my apps right now.
Magisk 20.4 is installed and working. Let's hope that new beta versions will appear next week.
cgdams said:
Okay, my Bootloader is unlocked and i did the install the current (may 24th) beta version of the xiaomi.eu ROM.
The installation was a bit rough around the edges: The currently available TWRP comes from a chinese developer and starts with chinese language. You can't read a thing.
Fortunately, i have used twrp so often already that i remembered how to change the language without having to read the buttons.
Having installed TWRP via fastboot, i booted into it, changed language and formatted the data partition under "Wipe". Then i connected my pc, transferred the ROM file to the phone and installed it.
I was a bit disappointed that my dear F2 changed it's personality immediately: it identified as Redmi K30 Pro from the first boot on. I know this "problem" from my Mi 9T Pro where the xiaomi.eu ROM changes its name to Redmi K20 Pro, but there was a patch in xiaomi.eu's K20 Pro forum that reversed this effect when flashed via TWRP. This kind of patch does not exist for the Poco F2 as of now, so i guess i'll have to live with it.
Other than that, all seem to run well. First boot took a couple of minutes, but Installation went smoothly and phone is restoring my configuration and installing all my apps right now.
Magisk 20.4 is installed and working. Let's hope that new beta versions will appear next week.
Click to expand...
Click to collapse
Im pretty sure this is because they are based on the china rom which is available for the redmi k30 pro/zoom
If xiaomi can differentiate between zoom and regular editions on kernel level (they share same kernel and same rom), Im sure that xiaomi.eu forums will be able to create a patch for poco if needed.
cgdams said:
Okay, my Bootloader is unlocked and i did the install the current (may 24th) beta version of the xiaomi.eu ROM.
The installation was a bit rough around the edges: The currently available TWRP comes from a chinese developer and starts with chinese language. You can't read a thing.
Fortunately, i have used twrp so often already that i remembered how to change the language without having to read the buttons.
Having installed TWRP via fastboot, i booted into it, changed language and formatted the data partition under "Wipe". Then i connected my pc, transferred the ROM file to the phone and installed it.
I was a bit disappointed that my dear F2 changed it's personality immediately: it identified as Redmi K30 Pro from the first boot on. I know this "problem" from my Mi 9T Pro where the xiaomi.eu ROM changes its name to Redmi K20 Pro, but there was a patch in xiaomi.eu's K20 Pro forum that reversed this effect when flashed via TWRP. This kind of patch does not exist for the Poco F2 as of now, so i guess i'll have to live with it.
Other than that, all seem to run well. First boot took a couple of minutes, but Installation went smoothly and phone is restoring my configuration and installing all my apps right now.
Magisk 20.4 is installed and working. Let's hope that new beta versions will appear next week.
Click to expand...
Click to collapse
Hello mate, i was trying to install it to my f2pro and it all ended in bootloop, it is mandatory to wipe the data partition before installing the rom? Is there any tutorial? I tried to install it twice ending in bootloop and having to install the official rom with the xiaomi rom tool.
Thanks!
Enviado desde mi POCO F2 Pro mediante Tapatalk
keko12991 said:
Hello mate, i was trying to install it to my f2pro and it all ended in bootloop, it is mandatory to wipe the data partition before installing the rom? Is there any tutorial? I tried to install it twice ending in bootloop and having to install the official rom with the xiaomi rom tool.
Thanks!
Enviado desde mi POCO F2 Pro mediante Tapatalk
Click to expand...
Click to collapse
Hello there,
In the installation instructions it says what to wipe and what you shouldn't wipe. I think you need to go back to stock and try again.
Cheers ?
Wow thanks for this! Need to wait for a week for Xiaomi to unlock my device (such a bummer as Oneplus don't have this waiting game). Any how, I hope (like it's brother K20 Pro/Premium), there will be AOSP, Lineage and PA flavored roms that will support our beloved Redmi K30 Pro/Zoom/Poco F2 Pro.
Thanks for your efforts on making this thread!
Great to see the development for his device has started .
Does the MIUI Dialer also have the build-in call recorder?
keko12991 said:
Hello mate, i was trying to install it to my f2pro and it all ended in bootloop, it is mandatory to wipe the data partition before installing the rom? Is there any tutorial? I tried to install it twice ending in bootloop and having to install the official rom with the xiaomi rom tool.
Thanks!
Enviado desde mi POCO F2 Pro mediante Tapatalk
Click to expand...
Click to collapse
In my experience (also from my Mi 9T Pro before), you not only need to wipe the data partition, you even need to format it (can be found under "Wipe" in TWRP) when coming from stock rom to xiaomi.eu for the first time.
Once on xiaomi.eu ROM, you can install newer versions by dirty flashing: no need to wipe your data partition, your apps, data and settings survive.
---------- Post added at 10:00 AM ---------- Previous post was at 09:57 AM ----------
bob*nwk said:
Great to see the development for his device has started .
Does the MIUI Dialer also have the build-in call recorder?
Click to expand...
Click to collapse
Indeed, it has the call recorder and it works well.
cgdams said:
Indeed, it has the call recorder and it works well.
Click to expand...
Click to collapse
Thanks for confirming. I can finally unlock my bootloader today (had a waiting period of 360 hours..), guess I'll flash this rom directly after that since my device will be wiped with unlocking now anyway.
Did you use the TWRP from this tread?
https://forum.xda-developers.com/poco-f2-pro/how-to/twrp-recovery-t4114121
bob*nwk said:
Thanks for confirming. I can finally unlock my bootloader today (had a waiting period of 360 hours..), guess I'll flash this rom directly after that since my device will be wiped with unlocking now anyway.
Did you use the TWRP from this tread?
https://forum.xda-developers.com/poco-f2-pro/how-to/twrp-recovery-t4114121
Click to expand...
Click to collapse
I'm not sure from which source i downloaded it, since it was some days before my bootloader unlock time ran out, but the file is named "recovery-TWRP-3.4.1B-0328-REDMI_K30PRO-CN-wzsx150.img"
At the moment, this seems to be only working TWRP for the Poco F2. Since it comes from a chinese developer, you have to change the language to English first, unless your fluent reading chinese.
To do that, you have to pull the slider on the bottom of the start screen to the right, then use the third button from the top in the second column of buttons (which is the "Settings" button) and then use the small globe symbol in the upper right of the screen.
Hi all, i want to report one bug:
Whenever enter to a game with full screen mode and play it for a while, the full screen gesture can not be use any more. So i have to press power button to lock my phone(game is running) then unlock the phone to come to the game. Here i can use the gesture as normal.
Yep
bob*nwk said:
Great to see the development for his device has started .
Does the MIUI Dialer also have the build-in call recorder?
Click to expand...
Click to collapse
Yes. It has the call recorder ?
I just succesfully unlocked, rooted and installed the MIUI 11 Stable. Restoring now, so far so good.
And the call recorder is working perfectly indeed (Y)
bob*nwk said:
I just succesfully unlocked, rooted and installed the MIUI 11 Stable. Restoring now, so far so good.
And the call recorder is working perfectly indeed (Y)
Click to expand...
Click to collapse
i read on the xiaomi eu forum that on one of the weekly roms, the mic was not working on calls https://xiaomi.eu/community/threads/no-voice-during-the-call.56159/ . Can you check if the mic works if you call somebody? I am just waiting for my unlock timer to end and want to install xiaomi eu.
As im writing this, the new xiaomi eu stable miui 12 came out, just for your information. The problem with the mic was on miui 12 so i hope they included a fix for the stable version before rolling it out.
Unfortunately, the stable MIUI 12 is not yet for us. Just for MI10, MI10Pro, HMK20MI9T, HMK305G.
No beta
No beta for this week either, links for the 20.6.16 were published and there is nothing for the K30 Pro neither the Mi10 nor Mi 10 Pro