After oreo screen flashes white and minimised, battery errors - HTC U Ultra Questions & Answers

I am on stock 8.0 after the update during a call the phone buzzed and made a loud sound like a siren. After the crash I used it and got message of abnormal restart. I decided to hard reset it. The phone buzzed for about 30 seconds at least and then booted giving me an error uDove to send to HTC. I sent the error and updated all apps to set up.
1. Since then whenever I wake up the phone with the fingerprint or open an app the current window goes white and gets minimised as an app would do. Or as if a pop up goes on and gets closed by an adblock (in desktop).
2. I noticed also lags in performance and battery drain.
All my apps are basic and from play store (major publishers and no games at all) With HTC support I used the phone in Safe mode and no problems where observed. I thought it was htc sense update that was causing the issues however it is not the case. I am lost and do not know what to do. The phone is annoying to use and 4 hard and soft resets did not improve anything.
I ran every check with the HTC utility and nothing significant was reported (all passed ok), During the following hardresets the bootloader gives error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

coniliakis said:
During the following hardresets the bootloader gives error
Click to expand...
Click to collapse
Looks like partitions map is damaged (hard to read the photo). My educated guess is that you either get a RUU from HTC and let the phone recover everything fresh or unlock boot loader and install custom ROM.
Can you use superuser rights via adb in the HTC recovery mode?

QDT said:
Looks like partitions map is damaged (hard to read the photo). My educated guess is that you either get a RUU from HTC and let the phone recover everything fresh or unlock boot loader and install custom ROM.
Can you use superuser rights via adb in the HTC recovery mode?
Click to expand...
Click to collapse
It reads:
handle_cota_install: install cwpkg to /cache/cota/cwpkg.zip
handle_cota_install: install cwprop to /cache/cota/cw.prop
E:can't open /sys/class/power_supply/battery/capacity
handle_cota_install: can't mount /sdcard
E:can't open /sys/class/power_supply/battery/capacity
Could you please tell me what is RUU and how to obtain it? My phone model is this one https://photos.app.goo.gl/tgzt2ebSj1fdt5o29
I can read if I know what I am looking for thank you. HTC has not been very helpful online

coniliakis said:
Could you please tell me what is RUU and how to obtain it? My phone model is this one https://photos.app.goo.gl/tgzt2ebSj1fdt5o29
I can read if I know what I am looking for thank you. HTC has not been very helpful online
Click to expand...
Click to collapse
HTC is sadly ignoring/abandon the U Ultra. Pity.
NVM
RUU is ROM Update Utility - it is an HTC format for update packages. Sadly, Oreo hasn't been made available by HTC.
Since (presuming) you are still under warranty (no unlocked bootloader etc.) I advise to hit the HTC service center and tell them that their OTA went wrong.
Alternatively I could only think of unlocking the bootloader and doing the fix yourself.

Whitch CID do You have? Is it single sim or dual?

I as an update the phone is getting worse the more I use it. I screen blacks out for few seconds and then back to normal. Something like voltage issues. If anyone knows the UK repair service I would appreciate the details. They are not responding e-mails and chat is not helpful at all.
It is bought with UK plug so I assume it is the ones in UK?

Cid
htc__001
wwe

coniliakis said:
Cid
htc__001
wwe
Click to expand...
Click to collapse
So. You have nothing to lose. Try to copy OTA to SD card. Clear Cache and Apply update from SD Card. Maybe it Will help...
https://forum.xda-developers.com/u-...ra-v1-0-0-apr-18th-fast-t3591645/post76405369

deemic said:
So. You have nothing to lose. Try to copy OTA to SD card. Clear Cache and Apply update from SD Card. Maybe it Will help...
https://forum.xda-developers.com/u-...ra-v1-0-0-apr-18th-fast-t3591645/post76405369
Click to expand...
Click to collapse
Edit:
Or downgrade to Nougat, then try with OTA again.

Hello everyone, after buying a new device (huawei) and after 4 visits to the repair center my phone seems to be replaced with another one. unfortunately the battery was changed and it is worse than ever (after a hard reset it says it was last fully charged 223days ago.
I solved the problem by doing a hard reset and not updating the google app. My last reported version (installed by HTC) is 7.17.28.21.arm64 (my device is HTC U ULTRA but same problem). After this everything else runs smoothly etc.
I believe it relates to new features of the app that change completely how it manages the device
• Use voice commands while navigating – even when your device has no connection. Try saying "cancel my navigation" "what's my ETA?" or "what's my next turn?"
• Weak connection? If your search fails, the Google app will deliver you results once you regain connection.
• Troubleshoot connectivity issues with more helpful error cards when your search fails because your device is offline
• New customization options available for cards in your feed

Related

Having issues unrooting!

I'm using flipz 1.56 RUU and for some reason, when it tells me to connect the phone to the PC, it says it cannot be found. I usually use a MAC to connect my Hero and all sorts of stuff, and I just found a PC to be able to unroot. What seems to be the issue? I know the phone is connected because I can look at it's folders and such.
BOOGIE_BOTZ said:
I'm using flipz 1.56 RUU and for some reason, when it tells me to connect the phone to the PC, it says it cannot be found. I usually use a MAC to connect my Hero and all sorts of stuff, and I just found a PC to be able to unroot. What seems to be the issue? I know the phone is connected because I can look at it's folders and such.
Click to expand...
Click to collapse
I'm having this EXACT same issue... But, if you can look at its folders, go into the notifications and set it to "charge only" and make sure USB debugging is enabled.
You need to install HTC Sync on the PC in order to use the RUU.
mrinehart93 said:
You need to install HTC Sync on the PC in order to use the RUU.
Click to expand...
Click to collapse
Yup, you beat me to it mrinehart hahaha. =]
Grrr...oh well unrooting I stay
Am about to unroot so I can take my Hero in to sprint, I have dust under the screen. Anyone want to point out the best (easiest) way to unroot?
I seen a post where it could be done by just sdcard, would that or using the kitchen be the best way to go?
I am running a 2.1 ROM.
Thanks!
http://forum.xda-developers.com/showthread.php?p=6070797#post6070797
Method 1 is dead simple
Just 5 steps?? WoW
I looked for a little bit today at work and could not find anything this easy. LOL
Anyone tested this?
1. Download the following file: http://www.multiupload.com/Q3RMV5MTRF
2. place in /root of SD card
3. Reboot phone into HBoot mode, by holding Volume Down
4. Press action (the trackball) when prompted
5. Reboot phone
while i havent done it, so cant confirm, the unroot from sd does seem to be the most foolproof way to do it. all their going to look for is the correct recovery.img and stock feel, so it only makes sense
Cool, Thanks!! I am going to give this a try (15 mins before I run in to sprint) I am going to hate to go with about my custom rom and add the added stuff I get with root!
chaos67731 said:
Just 5 steps?? WoW
I looked for a little bit today at work and could not find anything this easy. LOL
Anyone tested this?
1. Download the following file: http://www.multiupload.com/Q3RMV5MTRF
2. place in /root of SD card
3. Reboot phone into HBoot mode, by holding Volume Down
4. Press action (the trackball) when prompted
5. Reboot phone
Click to expand...
Click to collapse
Well i wrote the guide and I just literally did this method this afternoon
and to be fair the last two steps aren't really anything much at all...
rt1oo said:
Well i wrote the guide and I just literally did this method this afternoon
and to be fair the last two steps aren't really anything much at all...
Click to expand...
Click to collapse
What's HBoot?
BOOGIE_BOTZ said:
What's HBoot?
Click to expand...
Click to collapse
HBoot is recovery mode, When you power up the phone holding down the volume button.
{EDIT} Still not sure what the problem was. But I ran the older kitchen and tried the rooter and it worked just jine. {edit}
OK, I did the 5 little steps and then I went to kitchen to root my phone again..
I phone reboots and when I try to go to HBoot so I can nandroid a backup I have I get this screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone know what the problem is?

Problems unrooting...

Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark
Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...
gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.
Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!
You don't have to put your phone in disk drive mode...did you check?
I've tried it in Charge Only, Disk Drive and Sync.
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.
Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...
I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.
If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time

I've bricked my PHONE ! no restore point and no original SD CARD

I've bricked my phone and I have lost my original micro SD card ... ...
I've tried using Windows Phone Support Tool but it says,
The tool cannot recover this phone. 'Please contact technical support'.. ...
I've recently reinstalled my windows to windows 7 so l'd lost my recover in my Zune too.. ...
Is there anyway to recover the phone ?
I'd looked at Walshed Support Tool, does it work on this problem ?
Zune error message C101002E
any help? I have same problem.
You could try and contact tech support.
I have same problem but it's impossible for me to contact Dell support, I tried to call them in US but they tell me to join German support and I don't speak German at all...
Is anybody have a mail adress for DVP support in German or US???
[email protected]
Thanks a lot I will try it tomorrow!
I tried but I have this message:
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error.
Click to expand...
Click to collapse
Any idea???Or other mail adresse???
No...you are screwed.
my phone is still under warranty but I can't contact the service...
And my Tag number refer to a server and not a DVP...
You changed the SD Card...your phone's warranty is no longer valid.
I never change my SD card but i have this message now:
The title of this post says you did: "I've bricked my PHONE ! no restore point and no original SD CARD". If it is in fact the case that you did not remove the SIM it should still be under warranty. Try to call up Dell UK.
Thanks ^^
MJCS said:
The title of this post says you did: "I've bricked my PHONE ! no restore point and no original SD CARD". If it is in fact the case that you did not remove the SIM it should still be under warranty. Try to call up Dell UK.
Click to expand...
Click to collapse
I've called dell UK and told me my phone was a US so I have to call up US... ... I've called up US they said they are happy to exchange for phone for me providing I am in the US .... .... so back to square one ... ... but problem is, the original SD card is not there anymore... ... that's not under warranty right ?
I got friends in US but I don't want to bother them if it's not gona be under warranty unless I can get warranty stickers from ebay ?
Well you voided your warranty so you are at a loss. The first thing they are going to check is if you screwed with your SD card
Your best best at this point is to start your phone in the bootloader mode by inserting the battery and then holding power, vol down, and camera untill the image shows up of a laptop and a phone. Then download the 7704 image and extract it. Copy that to C:\Program Files\Zune. Open a command prompt there. Type UpdateWP.exe /ffu LongFileName.ffu and hit enter.
Thanks very MUCH !
MJCS said:
Your best best at this point is to start your phone in the bootloader mode by inserting the battery and then holding power, vol down, and camera untill the image shows up of a laptop and a phone. Then download the 7704 image and extract it. Copy that to C:\Program Files\Zune. Open a command prompt there. Type UpdateWP.exe /ffu LongFileName.ffu and hit enter.
Click to expand...
Click to collapse
Thanks very very very much, I have a working phone now and I've updated to mango, but now I feel the same frustration as to no tether and compass as others, but I can life with it, it's better than no phone at all
Thanks MJCS, you're STAR !
You can usb tether. And I am working on the compass
where can i download this image:
Then download the 7704 image
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1367563
Which? sorry
http://forum.xda-developers.com/show....php?t=1367563
Click to expand...
Click to collapse
I have a Dell Venue Pro Windows phone and changed my password because my sister found out what my password was. That was yesterday and I can't remember what I changed it to since I was in such a big hurry.I forgot my Live ID in Windows Phone 7
I've bricked my PHONE !
Zune error message: C101002E
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there a way to reset my whole phone perhaps?
Thank you!

[Q] "Hello world, PM EasyView!"? Possible malware caught on screenshot?

I recently took a screenshot that revealed another background window behind a warning message window that says "Hello world, PM EasyView!"
Is this some kind of malware? I tried scanning my phone with Lookout Security and it did not detect anything suspicious.
It all began when all of a sudden my stock 2.2.2 Defy's Task Manager kept showing popup messages telling me that my Hotmail app is running for too long and is consuming memory. This never happened before, ie. Task Manager app showing warning messages about apps running for too long. I suspect a malware infestation. Please advise.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are scared that you are infected by malware the only "safe" thing to do is a full data wipe.
You dont have clockworkmod installed do you? Would be helpfull to have a full copy of the system to analyze it. I think clockworkmod would be a perfekt method to get a copy of the whole system.
sorry i don't know how to solve this. maybe it's time for you to change to some other ROMs...
iRegistry said:
If you are scared that you are infected by malware the only "safe" thing to do is a full data wipe.
You dont have clockworkmod installed do you? Would be helpfull to have a full copy of the system to analyze it. I think clockworkmod would be a perfekt method to get a copy of the whole system.
Click to expand...
Click to collapse
Well not exactly scared but I was just wondering about the origin of that "Hello world" message. "PMEasyView"? I wasn't able to find any app or developer by that name among the apps installed on my phone. Just was wondering if anyone here knew thats all. I rooted my phone using SuperOneClick, does it install Clockworkmod too? Or do I have to do it separately?
tomarsenal said:
sorry i don't know how to solve this. maybe it's time for you to change to some other ROMs...
Click to expand...
Click to collapse
I did install CM 7.1(2.3.7) but I didn't quite like it..I mean don't get me wrong..CM 7.1 is awesome but the ADW launcher kept crashing on me, something was eating up the battery way to fast and this is weird but I found that the sound quality(headphone and speaker) had actually deteriorated..maybe I didn't get some settings right but anyways I decided to roll back to the Motorola stock 2.2.2 froyo JRDNEM_U3_3.4.3-36-1.7 and wait until CM9 was out.
Thanks for the replies guys..really appreciate you taking the time.
Anachronizer said:
CM 7.1 is awesome but the ADW launcher kept crashing on me, something was eating up the battery way to fast and this is weird but I found that the sound quality(headphone and speaker) had actually deteriorated..
Click to expand...
Click to collapse
If adw doesn't work for you, you can download another one from the market. I use go launcher and it works without any problems and damn fast. You should give it a try.
Sent from my MB525 using Tapatalk
Well it's typical behavior of mallware - I dont have information, that stock task manager will inform you, that some process is running more than x minutes ... try wipe to factory settings and you'll be sure.
Rooting doesn't install Clockworkmod. You only get superuser after rooting. Install 2nd-init and you get Clockworkmod.
You should start using Droidwall and AVG antivirus pro. Try limit the data freedom running in the background.
Thanks for the replies guys. I think I'll wait for CM9. I do have Droidwall installed and I've scanned my phone thoroughly with Lookout Security but nothing was detected. Is it possible that the firmware posted here, the 2.2.2 India one is somehow infected?
http://forum.xda-developers.com/showthread.php?t=1093352
I took another screenshot of the supposed malware today, this time without the task manager message. I was able to dismiss the task manager message by pressing the search key somehow.
I have seen exactly that same message today. I thought I have been fairly careful about Malware. However, there was an update that was installed from marketplace today.
I wonder if it is possible to look at an update history.
sailfast said:
I have seen exactly that same message today. I thought I have been fairly careful about Malware. However, there was an update that was installed from marketplace today.
I wonder if it is possible to look at an update history.
Click to expand...
Click to collapse
Is the message window in your case appearing under the exact same circumstances as mine? Which ROM are you using? And also if its possible could you do an inventory of the all the apps installed on your phone, then perhaps we can pinpoint the source. Thanks for the reply.

[Q] Can I update the Firmware on Developer Unlocked Device Without Losing the Unlock?

I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru
chakru said:
I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru
Click to expand...
Click to collapse
hi, if your device is unlocked, after update will remain intact. Zune make normally a backup before install a backup (but not shure if by each update). to be save do a backup:BACKUP now your unlocked MANGO phone - to RESTORE over ZUNE tnx xboxmod
Unzip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WP7 Update Cab Sender.zip on your computer. Its a update/backuptool. it contain a dummy cab- it will backup your phone- but nothing update. Run the WP7 Update Cab Sender.bat (without ZUNE run). If you get a error, please install the tool from folder "if needed install this tool".
After run the WP7 Update Cab Sender.bat type B for (fake) update and real backup. If you have already a backup in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update- please cut and paste it in a save place.
After all you will get a error message.
Is o.k. ignore the error message. Your BACKUP are succesful done. the error causes from the "fake update", the update cab is only a dummy and is neeaded to activate the Backup procces.
INFO: to see this path/files, you have to activate under windows explorer folder options "visible hidden files" The Backup files you will find in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update, such as this folder name d4e21648 - xxxxxx - xxxxxx - xxxxxxx.
When you then connect your phone and start ZUNE, and search to updates, ZUNE tell you "your phone software is actuall and you get the RESTOREPOINT. Copy/Cut the Backup folder from ....\Windows Phone Update to a save place
INFO: If you RESTORE it over ZUNE plase be patient, the first 10 minutes you do not see an progress- but wait it will! f the screen go off, turn on and lock off the screen AND wait!Restorations duration is ca. 40 min. please do nothing with the phone in this time. be patient. After Restorations connect again with ZUNE, then you get Samsung App Store alo back
DISCLAIMER
I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
original thread http://forum.xda-developers.com/showthread.php?t=1335452
WP7 Update Cab Sender.zip - (3.67 MB, 6743 views)

Categories

Resources