Database Users

You are subscribed to this thread Imate JasJar Enterin Bootloader mode.Turnon fail

Hello Everyone,
I am not a professional or anything i am just a student.So kindly when you use the terminology make sure its understandable for a person with less knowledge about unlocking and stuff.
Ok here goes my problem, Its an I-mate Jasjar and its not turning on when i press the Power button. It shows USB on top and V1.00 when entering Bootloader mode. I dont know what am i suppose to do after that as i ran into a professional guy on msn and he showed me how to get into bootloader mode and he is too busy to help me out so i am here.
What i did was Its battery was low and i tried to Hard Reset it and now it wont turn on.
So any help is much appreciated

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

chasmanian said:
instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Click to expand...
Click to collapse
Well said!
In the Wiki you can find a lot of usefull help!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the Error i am getting when i followed Method 2 .
Kindly tell me what am i doing wrong i already Unchecked the USB connection in ActiveSync ....Whatelse am i suppose to do...please guys i really love this phone and cant wait to use it again.
Thanks.
ZODI.

hi ZODI,
you better kill the ActiveSync all together by using windows tak manager. I mean to kill the process called wcescom.exe on your PC.
Then reconnect your UNIVERSAL.
Wait a bit, then have a look in PC's Device Manager, if your UNIVERSAL was recognised and it should be listed within USB devices as HTC USB Sync or similar.
If so, then do a reflash one more time.
good luck
buzz

Hi ZODI,
you'd better kill ActiveSync all the way down, by using windows task manager.
- disconnect your UNIVERSAL
- kill wcescomm.exe process on your PC
- connect your UNI again and wait a bit
- check if display shows USB at the top of the screen
- in PC's Device Manager check, if the device driver (HTC USB Sync) was loaded
If all done, proceed and do a ROM REFLASH.
If not, you may also check at http://buzzdev.net/list.php?40 mainly those two sticky posts at the top.
good luck
buzz

Ok giving it a try ....hope it works this time and thanks.

ZODI said:
Ok giving it a try ....hope it works this time and thanks.
Click to expand...
Click to collapse
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt reboot.

ZODI said:
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt boot.
Click to expand...
Click to collapse
I think i am gonna have find a Service centre and spend huge amount of my pocket money in just getting my phone to work

OMG .... i DID IT !!!!!!!!!!!! omg thanks guys i love you all
Love ya buzz from the bottom of my heart THANKS BRO !!!! and each and everyone of ya <3

Help, need a Dutch T-Mobile ROM (have to return my phone, production error?)

Argh,
I am really feeling down because of this...
Have my Xperia for 10 days now, treated it really well and now there is a small crack where the stylus is held in the case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This f*cking sucks, I am pissed off. Be sure to check your Xperia's guys, you might have the same problem!
Sucky thing is, the T-Mobile receipt says that you can return the item within 8 days in the original packing when it's broken. And of course I am 2 (tomorrow 3) days over the limit...
There was another guy from NL who figured it out that after 3 days he had a crack and he took the phone back.
Now I have to do the same, but I have a slight problem. I already flashed my phone to a UK ROM and I am a little concerned that they might ***** about the ROM being flashed. Can someone upload the Dutch T-Mobile ROM for me so I can put it back onto the phone?
Anyone else having this same problem?

vincew said:
Argh,
I am really feeling down because of this...
Have my Xperia for 10 days now, treated it really well and now there is a small crack where the stylus is held in the case.
This f*cking sucks, I am pissed off. Be sure to check your Xperia's guys, you might have the same problem!
Sucky thing is, the T-Mobile receipt says that you can return the item within 8 days in the original packing when it's broken. And of course I am 2 (tomorrow 3) days over the limit...
There was another guy from NL who figured it out that after 3 days he had a crack and he took the phone back.
Now I have to do the same, but I have a slight problem. I already flashed my phone to a UK ROM and I am a little concerned that they might ***** about the ROM being flashed. Can someone upload the Dutch T-Mobile ROM for me so I can put it back onto the phone?
Anyone else having this same problem?
Click to expand...
Click to collapse
http://rapidshare.com/files/1556908...1213-2293_CDF1216-0475_KOV_R1AA020.image.html
Rename the image file to nbh and then flash the phone
Please let every one knows if it works!!
By the way thanks for sharing the picture.
I'm checking my phone right now

I renamed the file to 'APP_SW_X1i_TMO_NL_1213-2293_CDF1216-0475_KOV_R1AA020.nbh'
Started the flash procedure, stopped at 11%, then I got an update error. Retried once, still the same... So it doesn't work!
Any thoughts?

vincew said:
I renamed the file to 'APP_SW_X1i_TMO_NL_1213-2293_CDF1216-0475_KOV_R1AA020.nbh'
Started the flash procedure, stopped at 11%, then I got an update error. Retried once, still the same... So it doesn't work!
Any thoughts?
Click to expand...
Click to collapse
Working on vista or XP?
Otherwise use this option
*** Flash X1 without PC - Micro SD Method ***
​This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
0. Make sure x1 is hard-spl first
1. Make sure your micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it your X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction

I use XP, will check out your suggestion. Already read that there are problems with HardSPL and Vista. Thanks!

Problems unrooting...

Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark

Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...

gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.

Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!

You don't have to put your phone in disk drive mode...did you check?

I've tried it in Charge Only, Disk Drive and Sync.

It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...

gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.

Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...

I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.

If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.

Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App

Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time

After oreo screen flashes white and minimised, battery errors

I am on stock 8.0 after the update during a call the phone buzzed and made a loud sound like a siren. After the crash I used it and got message of abnormal restart. I decided to hard reset it. The phone buzzed for about 30 seconds at least and then booted giving me an error uDove to send to HTC. I sent the error and updated all apps to set up.
1. Since then whenever I wake up the phone with the fingerprint or open an app the current window goes white and gets minimised as an app would do. Or as if a pop up goes on and gets closed by an adblock (in desktop).
2. I noticed also lags in performance and battery drain.
All my apps are basic and from play store (major publishers and no games at all) With HTC support I used the phone in Safe mode and no problems where observed. I thought it was htc sense update that was causing the issues however it is not the case. I am lost and do not know what to do. The phone is annoying to use and 4 hard and soft resets did not improve anything.
I ran every check with the HTC utility and nothing significant was reported (all passed ok), During the following hardresets the bootloader gives error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

coniliakis said:
During the following hardresets the bootloader gives error
Click to expand...
Click to collapse
Looks like partitions map is damaged (hard to read the photo). My educated guess is that you either get a RUU from HTC and let the phone recover everything fresh or unlock boot loader and install custom ROM.
Can you use superuser rights via adb in the HTC recovery mode?

QDT said:
Looks like partitions map is damaged (hard to read the photo). My educated guess is that you either get a RUU from HTC and let the phone recover everything fresh or unlock boot loader and install custom ROM.
Can you use superuser rights via adb in the HTC recovery mode?
Click to expand...
Click to collapse
It reads:
handle_cota_install: install cwpkg to /cache/cota/cwpkg.zip
handle_cota_install: install cwprop to /cache/cota/cw.prop
E:can't open /sys/class/power_supply/battery/capacity
handle_cota_install: can't mount /sdcard
E:can't open /sys/class/power_supply/battery/capacity
Could you please tell me what is RUU and how to obtain it? My phone model is this one https://photos.app.goo.gl/tgzt2ebSj1fdt5o29
I can read if I know what I am looking for thank you. HTC has not been very helpful online

coniliakis said:
Could you please tell me what is RUU and how to obtain it? My phone model is this one https://photos.app.goo.gl/tgzt2ebSj1fdt5o29
I can read if I know what I am looking for thank you. HTC has not been very helpful online
Click to expand...
Click to collapse
HTC is sadly ignoring/abandon the U Ultra. Pity.
NVM
RUU is ROM Update Utility - it is an HTC format for update packages. Sadly, Oreo hasn't been made available by HTC.
Since (presuming) you are still under warranty (no unlocked bootloader etc.) I advise to hit the HTC service center and tell them that their OTA went wrong.
Alternatively I could only think of unlocking the bootloader and doing the fix yourself.

Whitch CID do You have? Is it single sim or dual?

I as an update the phone is getting worse the more I use it. I screen blacks out for few seconds and then back to normal. Something like voltage issues. If anyone knows the UK repair service I would appreciate the details. They are not responding e-mails and chat is not helpful at all.
It is bought with UK plug so I assume it is the ones in UK?

Cid
htc__001
wwe

coniliakis said:
Cid
htc__001
wwe
Click to expand...
Click to collapse
So. You have nothing to lose. Try to copy OTA to SD card. Clear Cache and Apply update from SD Card. Maybe it Will help...
https://forum.xda-developers.com/u-...ra-v1-0-0-apr-18th-fast-t3591645/post76405369

deemic said:
So. You have nothing to lose. Try to copy OTA to SD card. Clear Cache and Apply update from SD Card. Maybe it Will help...
https://forum.xda-developers.com/u-...ra-v1-0-0-apr-18th-fast-t3591645/post76405369
Click to expand...
Click to collapse
Edit:
Or downgrade to Nougat, then try with OTA again.

Hello everyone, after buying a new device (huawei) and after 4 visits to the repair center my phone seems to be replaced with another one. unfortunately the battery was changed and it is worse than ever (after a hard reset it says it was last fully charged 223days ago.
I solved the problem by doing a hard reset and not updating the google app. My last reported version (installed by HTC) is 7.17.28.21.arm64 (my device is HTC U ULTRA but same problem). After this everything else runs smoothly etc.
I believe it relates to new features of the app that change completely how it manages the device
• Use voice commands while navigating – even when your device has no connection. Try saying "cancel my navigation" "what's my ETA?" or "what's my next turn?"
• Weak connection? If your search fails, the Google app will deliver you results once you regain connection.
• Troubleshoot connectivity issues with more helpful error cards when your search fails because your device is offline
• New customization options available for cards in your feed

US996 IMEI null - 0's - How Do I Fix THIS?

After doing an official LG Bootloader Unlock and installing TWRP, I accidentally restored the EFS partition from my other US996 when attempting to "clone" it (not the IMEI, though, of course).
First thing that happened was a RED exclamation triangle (instead of ORANGE) with CORRUPT message, no boot.
So, I used LGUP to upgrade and was back to stock, locked bootloader.
When I tried to "fastboot unlock unlock.bin", I got an error. The IMEI shown was all zeros and the message, naturally said "Invalid unlock.bin file".
I used the DirtySanta method to unlock/TWRP/SuperSU, but, even though I could get into TWRP recovery, in normal boot, the phone wants a secure boot password and gives me 22 of 30 tries left.
So, I did LGUP again and I'm back where i was before DirtySanta.
How do I fix THIS:?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE HELP. :fingers-crossed:

follow this guide https://www.androidbrick.com/ultima...-xiaomi-mi5-imei-and-baseband-repair-fix/amp/

mohsin931 said:
follow this guide https://www.androidbrick.com/ultima...-xiaomi-mi5-imei-and-baseband-repair-fix/amp/
Click to expand...
Click to collapse
Thanks, but... After spending over an hour, I can't get the diagnostic ports to show on my PC. I used HiddenMenuCall.apk to get to the service menu and enabled the ports on the phone, installed the port drivers and all other software in the guide except ADB platform tools (have it) and the video that shows the procedure to hex edit the file is impossible to follow because the command window is illegible.
Anyone want a useless US996?
Going through this crap just isn't worth the $132.50 the phone cost me. I'd just as soon buy another one. I only got it as a tester/backup so I don't screw up my good one by messing with ROMs.

Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)

Prowler_gr said:
Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)
Click to expand...
Click to collapse
That keypad code doesn't work, but I got to the menu using HiddenMenuCall.apk.
I plugged in the IMEI and WOOHOO!!! after rebooting, ALL THE FIELDS ARE FILLED PROPERLY!!
THANK YOU PROWLER!!!!

HelloG3_MotoNoMore said:
That keypad code doesn't work, but I got to the menu using HiddenMenuCall.apk.
I plugged in the IMEI and WOOHOO!!! after rebooting, ALL THE FIELDS ARE FILLED PROPERLY!!
THANK YOU PROWLER!!!!
Click to expand...
Click to collapse
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).

Prowler_gr said:
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).
Click to expand...
Click to collapse
I have my doubts, but I'll let you know. This one's just a test-toy anyway.
Thanks again.

Prowler_gr said:
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).
Click to expand...
Click to collapse
Did a full wipe. All fields stay filled, unlock.bin still works. All better. Thanks again.

HelloG3_MotoNoMore said:
Did a full wipe. All fields stay filled, unlock.bin still works. All better. Thanks again.
Click to expand...
Click to collapse
Happy to hear it's all working for you...

Prowler_gr said:
Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)
Click to expand...
Click to collapse
So you press MID WRITE? got to it by installing hidden menu app but nothing happens when pressing write. I only entered imei as I only have that now

Ok, now it worked after some messing around. entered imei from back of phone and the others from settings and it seems to stick but not radio still. Maybe it dos not have the right bands, I'm in Norway. But my VS995 and F800 have no radio problems