Related
So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,
Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.
Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works
First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.
Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!
Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!
no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*
I am no noobie when it comes to android rooting since I root and flash all of my android devices. But the axon 7 is a really tough son of a b*tch.
I got it brand new. Unlocked the bootloader then proceeded to update to marshmallow just so I can get nougat on my device. Then I installed TWRP so I can flash supersu, xposed and an audio mod zip. I believe this audio mod is what killed my devices since it was not booting into the os. Just stuck at the flashy axon booting screen. I booted into TWRP, deleted data, system and system storage and installed the nougat 2,6gb "update.zip" file. Since then the os is not booting at all, its just stuck at the booting screen, the warning because of the unlocked bootloader. And also, now, stock recovery is installed.
I have an idea how to fix this I am rather cautious so thats why Im asking the experts here first
EDIT: I have the 2017G Version
I have an A2017U, but if you can get your hands on an official Marshmallow zip, then that should hopefully let you boot. From there you can OTA update back to Nougat, then you just need to figure out how to install TWRP again.
Another recovery method is to flash EDL files with MiFlash while your phone is booted into EDL mode.
As for audio mods, I just use Arise, it's very comprehensive and has never bricked my phone.
I have an idea why you can't boot after flashing the Nougat zip: you triggered dm-verity. You must also flash a root zip that patches out the dm-verity. Or you can use @jcadduono's "no verity opt encrypt" zip as an alternative if you don't want to root. Your system and cache partitions should be formatted as ext4, and data should be F2FS. I recommend a full wipe of all partitions except the MicroSD.
GriechischerYoghurt said:
I am no noobie when it comes to android rooting since I root and flash all of my android devices. But the axon 7 is a really tough son of a b*tch.
I got it brand new. Unlocked the bootloader then proceeded to update to marshmallow just so I can get nougat on my device. Then I installed TWRP so I can flash supersu, xposed and an audio mod zip. I believe this audio mod is what killed my devices since it was not booting into the os. Just stuck at the flashy axon booting screen. I booted into TWRP, deleted data, system and system storage and installed the nougat 2,6gb "update.zip" file. Since then the os is not booting at all, its just stuck at the booting screen, the warning because of the unlocked bootloader. And also, now, stock recovery is installed.
I have an idea how to fix this I am rather cautious so thats why Im asking the experts here first
EDIT: I have the 2017G Version
Click to expand...
Click to collapse
If you still have TWRP, download Raystef66's B09 TWRP flashable Stocksystem and Bootstack, plus Magisk 15.2. Flash everything then wipe data.
What broke your device was probably Xposed.
Also, which audio mod are you talking about? Ainur, V4Android, V4ARISE, AK4490 patch, maybe some other?
Thanks for the help! i Managed to flash TWRP in EDL mode (black screen). Then I proceeded to flash nougat B9. I was up all night reading about it and searching tutorials how to flash stock from TWRP. I installed Bootstack and System, supersu 2.79 and xposed. First boot did not work but that was actually in the guide so I had to flash system and root again. My data partition is ext4 and everything works good now. I hope it wont make any problems.
The audio mod was "divine 10" or something. I will try the ones you have mentioned.
Thanks for all the help
GriechischerYoghurt said:
Thanks for the help! i Managed to flash TWRP in EDL mode (black screen). Then I proceeded to flash nougat B9. I was up all night reading about it and searching tutorials how to flash stock from TWRP. I installed Bootstack and System, supersu 2.79 and xposed. First boot did not work but that was actually in the guide so I had to flash system and root again. My data partition is ext4 and everything works good now. I hope it wont make any problems.
The audio mod was "divine 10" or something. I will try the ones you have mentioned.
Thanks for all the help
Click to expand...
Click to collapse
Xposed usually needs a 2 or 3 minute first boot for some reason, just sayin
So im trying to root my oneplus 5 and i started off by using Lineage OS but i wasnt too happy with it and i liked Oxygen OS much better so i decided to go back to it and while doing so like an idiot i wiped everything in twrp including the storage with all my ROM files and the phone was bricked and after a long struggle i used the unbrick tool which is called MSM tool which installed oxygen 4.5.8 using some some Qualcomm mode or something and it booted and worked fine but ever since i wasnt able to download the oxygen 5.1.1 update through the phones update section, it reaches 100% and says signature verification failed and goes back to 5%. So i tried downloading the latest Open Beta from the OP site and tried local upgrade which said installation failed so i try installing it locally through the Oxygen Recovery but again Installation failed so i try unlocking the bootloader again and installing it through twrp and it just keeps showing the boot animation forever( i know people say be patient but i waited for 20 mins+). So i decided to use the unbrick tool again and now im stuck on the OOS 4.5.8 unable to update the phone.
I tried to flash the latest oreo through twrp several times and just tried flashing it through so many ways where none worked , even adb sideloading it worked till 47% and said installation failed and everytime this happens i have nothing left to do but use the tool and unbrick it again and this takes so much time as i have to unbrick and then do the first setup and then go to fastboot and unlock the bootloader and do the setup again and transfer the files and then install twrp and flash.
Nothing has worked so far
And now even when i go back to the 4.5.8 stock after unbricking for some reason it just doesnt connect to any wifi , it just says Connecting and then saved and then disabled and repeat, only my mobile data works.
I tried to flash lineage again but got an error 7 with it or something and im back to the stock unbricked state without wifi and all i can do is unlock bootloader and install twrp.
If anybody has any suggestions and can help me please do so immediately. I require my phone urgently and need to fix this fast.
Thank You !
(btw im in India and do local service centres fix such issues?)
Make sure you use newest twrp. And also flash firmware for 5.1.1
Vika__ said:
Make sure you use newest twrp. And also flash firmware for 5.1.1
Click to expand...
Click to collapse
i am using the latest codeworkx twrp 3.2.1 and when should i flash firmware? can you just give the process i should do? stuck at 4.5.8 without wifi with twrp and unlocked bootloader
Wipe everything except internal storage, after that click format data and type "yes" to accept. Then download oos 5.1.0 firmware from here https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/ and lineageos 15 (or any rom you want now), gapps and move all 3 packages to your phone. Flash firmware first and then reboot to recovery. Then flash rom or gapps and reboot
You have to flash the latest TWRP from twrp.me, then download the latest OxygenOS build. Reboot into TWRP, wipe data, cache, system and flash the latest build, then just go to wipe > format data, type "yes" and reboot
Lol man your OP5 is not bricked, if you can boot on TWRP, you can install all that you want
I advise to Format Data/Storage, Wipe everything and install xXx 10.7 (OOS Custom with a great Aroma installer), choose decrypted, it's better if you want swtich rom in the future AOSP > OOS > AOSP
bro i have same probleme after install any rom custom or official , always stuck on boot logo , any solution ?
no solution??
Hey, so I wanted to install a custom ROM (LineageOS 14.1) anyway, I found this site that was showing me how to but first i needed to unlock bootloader and install TWRP, i clicked on the steps for that and it brought me here:
https://devsjournal.com/how-to-root...to_unlock_Bootloader_of_Motorola_Moto_G4_Plus
I followed all the steps on that page, even installing the SuperSU, but this is where the problem began. After rebooting from installing SuperSU i was stuck on a black screen (not even backlight) and a white blinking LED light next to the fingerprint scanner. I began to look around for a fix and i found this site:
https://forum.xda-developers.com/2015-moto-g/help/problem-boot-flashing-supersu-t3507127
I followed the steps but nothing worked. Then i tried this:
https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
but that still didn't work. Flashing a new ROM does not fix the problem, and it seems nothing will. I am able to get into the bootloader and I am also still able to get into TWRP but i can't boot into ROM. I need help.
I should have attached this before but here is a picture of the bootloader. After typing in all those command the only thing that changed was the yellow text that says Software status: Modified
1) What ROM are you trying to flash onto your device?
2)The issue here appears to be that you've rooted on the stock ROM - what those pages don't mention is that those steps only work for Marshmallow stock ROMs - attempting to root on the stock Motorola Nougat ROM may cause you to bootloop and you need a custom kernel to root on stock Nougat ROMs. One way around this may be to flash a custom kernel such as ElementalX 2.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 then attempt to boot. You can boot to TWRP, connect your device to your computer, which should show up as internal storage. There, you should be able to copy a download of the custom kernel to your device and flash through TWRP. If you made a backup before rooting, you could re-flash just the boot (kernel) partition to restore a clean stock kernel then attempt to flash the custom kernel and then root.
3)You could alternatively boot to TWRP and flash Lineage. You do not need root at all to flash custom ROMs - just an unlocked bootloader. Root for installing custom ROMs is unnecessary. Be aware to flash the Lineage build matching your TWRP (i.e. 32 bit Lineage if you're running the official TWRP or any other 32 bit TWRP recovery for athene, 64 bit Lineage only is flashable with the 64 bit TWRP, else you'll get an error 255 on flashing). As always, flashing a new custom ROM requires a /system, /data and /cache wipe at least - possibly an internal storage wipe, so back up to your computer or the cloud as necessary.
4)As for the modified status, that may have been from rooting on the stock kernel. That can disappear if you were to flash a stock OTA onto your device, but that would mean flashing the NPJ25.93-14.7 Sept 2017 security patch stock ROM (latest leak we have for XT1644 devices as far as I recall), and then taking OTA updates up to April 2018 which may be risky.
echo92 said:
1) What ROM are you trying to flash onto your device?
2)The issue here appears to be that you've rooted on the stock ROM - what those pages don't mention is that those steps only work for Marshmallow stock ROMs - attempting to root on the stock Motorola Nougat ROM may cause you to bootloop and you need a custom kernel to root on stock Nougat ROMs. One way around this may be to flash a custom kernel such as ElementalX 2.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 then attempt to boot. You can boot to TWRP, connect your device to your computer, which should show up as internal storage. There, you should be able to copy a download of the custom kernel to your device and flash through TWRP. If you made a backup before rooting, you could re-flash just the boot (kernel) partition to restore a clean stock kernel then attempt to flash the custom kernel and then root.
3)You could alternatively boot to TWRP and flash Lineage. You do not need root at all to flash custom ROMs - just an unlocked bootloader. Root for installing custom ROMs is unnecessary. Be aware to flash the Lineage build matching your TWRP (i.e. 32 bit Lineage if you're running the official TWRP or any other 32 bit TWRP recovery for athene, 64 bit Lineage only is flashable with the 64 bit TWRP, else you'll get an error 255 on flashing). As always, flashing a new custom ROM requires a /system, /data and /cache wipe at least - possibly an internal storage wipe, so back up to your computer or the cloud as necessary.
4)As for the modified status, that may have been from rooting on the stock kernel. That can disappear if you were to flash a stock OTA onto your device, but that would mean flashing the NPJ25.93-14.7 Sept 2017 security patch stock ROM (latest leak we have for XT1644 devices as far as I recall), and then taking OTA updates up to April 2018 which may be risky.
Click to expand...
Click to collapse
Yea i should have been more clear on what ROM i was trying to flash, i wanted to flash LineageOS but when i try to flash it and boot i still get the same problem, the led light just blinks over and over until i unplug the phone or go into the bootloader. Maybe i have the wrong version of something? All i know is that the phone was working perfectly fine before and it is the XT1644 model. It had all its updates up to date but i just wanted to install LineageOS, i do now realize that you don't need root to flash a custom ROM but also i don't know where to find files for the kernel you are talking about, I also did not make a backup (lets just say im pretty stupid and i know i should have). If you have any info or need any more to further assist me, let me know. Thank you for responding!
So i tried flashing the custom kernel and it looked like everything was working, but the phone still won't boot, it just flashes the LED light, also i reinstalled LineageOS after wiping all the cache and internal storage and stuff but it still hasn't worked.
Hey, i got good news, i was able to get the phone to boot by downloading and following these steps here: https://forum.xda-developers.com/mo...e-npj25-93-t3549369/post70843323#post70843323
The phone now is working and i will attempt to install LineageOS once more. Thank you for you help!