Database Users

OP2 cannot upgrade from Oxygen OS 2.2.1/Cannot flash TWRP versions newer than 3.0.2-0

So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.

Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.

Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:

Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!

Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?

Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.

thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.

Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?

Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,

No OS installed. TWRP cannot flash new custom ROM

Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.

Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works

First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!

Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?

manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.

Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!

Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.

Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?

manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!

Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero

manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!

no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]

xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP

Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)

xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*

Re-Rooting 1+5 after OS 5.1.1 Update

So I tried updating to Oxygen is 5.0 ran into an install issue, stuck in boot loop. Lucky I had done a Nandroid back up and restore everything. The other night I decided to update to 5.1.1 thinking why not get Android 8.1.0 on my AWESOME phone. Downloaded update, placed in internal storage, booted into TWRP to do a Nandroid back up (due to issues with past update). Back up failed needed to clean drive. So I decided, phone works in Android 7.1.1, why can't what's not broken. Rebooted phone and somehow the update activated. I freaked since last time it failed and not stuck in a loop. This time update was successful but still got stuck in a boot loop. I plugged my phone to my computer and noticed all my files were gone on their install storage, no files / foldersI recognized (e.g. DCIM, DATA, DOWNLOAD, etc). Emailed One Plus and chatted with them. TWRP was gone and was back on stock recovery. Since all was lost I was asked to "Erase All". I did, rebooted and I'm now on 8.1.1 but all my stuff was lost. So I've done since searching and found FlashFire do to a Nandroid backup but need root. So my question is...
Can I re-root my phone without using TWRP but stock recovery and use FlashFire for my back ups? I am not going to flash custom ROM but if I need to flash something, wouldn't stock ROM flash anything on my phone (Magisk)?
If so, can anyone provide me with assistance on re-rooting my phone without TWRP.
Thank you

As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked

Hi
To root your OnePlus 5, you must to follow carefuly the steps below and take your time.
1 - Make a full backup of your data
2 - Unlock the bootloader (Note that'll erase your phone)
3 - Install another recovery : TWRP. This one : https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download
4 - Flash the full rom Oxygen OS 5.1.1 : http://otafsg.h2os.com/patch/amazon...23_OTA_034_all_1804201219_3824995916a49ee.zip
5 - Install magisk : https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
6 - Clear cache / Dalvik
7 - You're all done, reboot the phone
8 - Once your phone has booted up, install magisk manager : https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
Check this tread, that'll help you as well : https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877

vanzant83 said:
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Click to expand...
Click to collapse
Hello, thanks for the info and yes, I did try flashing Magisk with stock recovery, while waiting for a reply and can confirm installation failed. So if I reflash TWRP, flashing Magisk using TWRP will work. Therefore, do you have instructions (step-by-step) on how to install TWRP. I have downloaded the latest TWRP image from their website (twrp-3.1.1-1 cheeseburger) onto my desktop. Bootloader is already unlocked as I was previously rooted under Android 7.1.
Thank you.

https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.

vanzant83 said:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
Click to expand...
Click to collapse
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie

jmoricone said:
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
Click to expand...
Click to collapse
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file

Try this link, get the ZIP file from the version you want: https://github.com/topjohnwu/Magisk/releases/
In case you need, this the official section: https://forum.xda-developers.com/apps/magisk

vanzant83 said:
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Click to expand...
Click to collapse
Hey there, sorry for the late response..but thank you for the assist..phone is rerooted..all is good..thanks again

HELP No recovery, usb not recognized

Its a shame.
7 years unlocking bootloaders, installing CWM or TWRP or Philz recovery, flashing rom after rom, not even one device bricked, and today, i messed up, i hope its not bad.
So the short version of what i did is that i flashed twrp.img trough and older version of twrp and now it wont boot into twrp, it says that it failed to verify the recovery image or something like that, and my laptop wont recognize the cellphone, the cellphone boots into the latest Havoc rom but without Gapps and without root because i did not install it beforehand, when in bootloader mode it just says that it could not recognize the device.
The long version is that i had Resurrection Remix, obviously an unlock bootloader, magisk etc... everything was fine until today that i tried to install Havoc, the installation went well but i found out that ambient display was not working, someone told me that the previous version of Havoc did not had that problem so i tried to flash it but it bootlooped for like 1hr, so i read that the version of TWRP provided by the OP was the way to get it to work, i downloaded the .img file and flashed it trough TWRP and tried to install Havoc again but i was stuck in a bootloop, so i flashed the latest Havoc build so i could download the latest version of twrp, i did not flash Gapps or Magisk because i was going to re flash the rom and then flash Gapps and magisk, so i downloaded TWRP and flashed trough TWRP and thats when the sh$& hit the fan, now it wont boot into TRWP and my laptop wont recognize the device, neither on android nor in bootloader mode.
So, thank you guys in advance for your help, tomorrow im going to try on a computer at my work and see if its my computer and if not, well, ill have to se what you geniuses come up with. thank you so much again.
Info:
Rom build number: opm6.171017.030.h1 or 20180811 android 8.1.0
TWRP: i started with 3.2.2-0 then i downgraded to 3.2.1-0 and the one that messed up everything was 3.2.3-0
By the way, I have a full twrp backup of when my phone was stock, (but no way to use it) T_T

Phone going into recovery after trying to update the rom?

So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?

beybus said:
So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?
Click to expand...
Click to collapse
Download latest Miui version ,Magisk and lazyflasher-no-verity-opt-encrypt
Wipe cache/Art
Install the rom using TWRP
Install magisk
Install lazy flasher
Reboot.
Every thing you need can be found in this link i have already downloaded it and put all the things in one folder.
https://1drv.ms/u/s!AuqQvn5aQs0xg_IU3fLQqFxu9pp-dg?e=JaoDdC