Mi A1 bricked, hard resetted it by opening the back cover and shorting two points.
It gets detected by mi flash tool but I cannot flash the stock room. It is giving me "cannot receive hello packet" and then it times out.
Any help will be appreciated.
Thank you.
I'm in the same boat, it's showing up in device manager under ports (COMS & LPT) and in flash tool, yet i cant flash anything
Any help for us?
foggs said:
I'm in the same boat, it's showing up in device manager under ports (COMS & LPT) and in flash tool, yet i cant flash anything
Any help for us?
Click to expand...
Click to collapse
It was solved after I changed the USB port on laptop. I got far as installing tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794 image and booting to fastboot and then TWRP. But after flashing AOSP extended rom it gave me "The system has been destroyed" screen. And somehow recovery is not staying. It apparently gets wiped after reboot.
udaan said:
It was solved after I changed the USB port on laptop. I got far as installing tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794 image and booting to fastboot and then TWRP. But after flashing AOSP extended rom it gave me "The system has been destroyed" screen. And somehow recovery is not staying. It apparently gets wiped after reboot.
Click to expand...
Click to collapse
I've also tried different ports, still the same message of the hello packet thing. Also when I have the phone connected to the computer I've a white led light blinking.
From reading other threads here and Xiaomi site the deep flash cable opens the com port, I already have this but won't work. There was something about a loader.img, flashing this to an sdcard and holding power and vol down button it then should boot the loader IMG and rescue the phone, this also fails for me.
foggs said:
I've also tried different ports, still the same message of the hello packet thing. Also when I have the phone connected to the computer I've a white led light blinking.
From reading other threads here and Xiaomi site the deep flash cable opens the com port, I already have this but won't work. There was something about a loader.img, flashing this to an sdcard and holding power and vol down button it then should boot the loader IMG and rescue the phone, this also fails for me.
Click to expand...
Click to collapse
Yup, I ruined one of my usb-C cable trying do do deep flash that way. I failed, so I went to one repair shop and open up the device and did the "two point short thing", which helped to be recognized by the flash tool. Then it showed me that "hello packet" thing.
Then I dug around the Internet for couple of hours and changed the USB port on laptop. I also restarted the laptop after I reinstalled the drivers. Then it actually flashed that ROM I mentioned above. But just that ROM. I tried the latest to oldest versions and all of those ROM would flash but then they will brick the phone again. Only that one worked, i.e. helped me to get to bootloader. But alas it is stuck there, no matter how many times I clean flashed it, it is refusing to boot to system. It gives me "Your SYSTEM HAS BEEN DESTROYED" message on every boot. It only goes to bootloader if I press Volume Up + Power button while booting. And it's a dead end for now. I don't know what else to do.
Also this phone was bought in Hong Kong and its warranty won't work where I am right now. I already took it to the authorized service center and those lazy people told me to change the motherboard and it will cost around $180. So I took it back. lol
Disable driver enforcment to get the hello packet.
TrueMS said:
Disable driver enforcment to get the hello packet.
Click to expand...
Click to collapse
still no hello packet
Your timeout for edl mode has passed
You must press power button for 10-15 sec to power cycle the phone
Or open it up and remove battery socket
Or wait for battery drained out
And after that edl will accept hello package
emprazol said:
Your timeout for edl mode has passed
You must press power button for 10-15 sec to power cycle the phone
Or open it up and remove battery socket
Or wait for battery drained out
And after that edl will accept hello package
Click to expand...
Click to collapse
:victory: Held the power button, clicked flash.. Success :good: it's in the process of flashing now. Thank you
Edit: successful flash now to just let it charge up. Thanks again guys for the help/suggestions ?
Update, i flashed the Oreo stock it gave my a successful flash, let the phone charge to near full. Booted the phone up, got as far as sending information to Google option and the screen became non responsive and the phone rebooted, it did this a few times and I gave up and put it in fastboot mode.
I did another flash using a different option clean flash still with Oreo ROM, I think first time I did it with keeping data not 100% though.. but ended up with the same result of it going into random reboots at different points in the setting the phone up stage.
I've now tried two 7.1.2 stock ROMs with the same results ???
I'll try a custom ROM tomorrow see if that sorts it, if not I'm out of ideas. So freaking close ?
foggs said:
Update, i flashed the Oreo stock it gave my a successful flash, let the phone charge to near full. Booted the phone up, got as far as sending information to Google option and the screen became non responsive and the phone rebooted, it did this a few times and I gave up and put it in fastboot mode.
I did another flash using a different option clean flash still with Oreo ROM, I think first time I did it with keeping data not 100% though.. but ended up with the same result of it going into random reboots at different points in the setting the phone up stage.
I've now tried two 7.1.2 stock ROMs with the same results ???
I'll try a custom ROM tomorrow see if that sorts it, if not I'm out of ideas. So freaking close ?
Click to expand...
Click to collapse
Ur presist partition is damaged..thr are many guides here about recovering it
Do the "factory flash" mode in MiFlash under EDL mode as a last resort. May wipe your IMEI and MAC's, not sure.
Could not receive magic packet is solved by using USB2 port, Windows 7 x86 (32-bit) in a VM, or power-cycling the device and starting over, any or all of the above.
Deep flash cable is only for kicking the phone out of diagnostic mode and into QDFlash mode. Not necessary if using test point. I had to use testpoint method myself, couldn't get deepflash cable to work for getting out of diagnostic mode. I hope I can get it working next time though when I inevitably brick it from repartitioning; as I broke my screen when disassembling
apexashwin said:
Ur presist partition is damaged..thr are many guides here about recovering it
Click to expand...
Click to collapse
No luck with flashing the persist.img either from 7.1.2 or 8.0 stock ROMs. I used the fastboot method and twrp with both ROMs.
I've tried the factory flash with 8.0 ROM in miflash tool this to hasn't solved the problem. It reboots on the set up I unlocked the bootloader to boot twrp flashed persist it reboots as far as bootloader unlocked screen and it stays there. ?
I'm guessing even flashing a custom ROM will do nothing either?
foggs said:
No luck with flashing the persist.img either from 7.1.2 or 8.0 stock ROMs. I used the fastboot method and twrp with both ROMs.
I've tried the factory flash with 8.0 ROM in miflash tool this to hasn't solved the problem. It reboots on the set up I unlocked the bootloader to boot twrp flashed persist it reboots as far as bootloader unlocked screen and it stays there. ?
I'm guessing even flashing a custom ROM will do nothing either?
Click to expand...
Click to collapse
Did you find the guide about fixing constant reboot? It's around somewhere, might be on MIUI forum.
foggs said:
No luck with flashing the persist.img either from 7.1.2 or 8.0 stock ROMs. I used the fastboot method and twrp with both ROMs.
I've tried the factory flash with 8.0 ROM in miflash tool this to hasn't solved the problem. It reboots on the set up I unlocked the bootloader to boot twrp flashed persist it reboots as far as bootloader unlocked screen and it stays there. ?
I'm guessing even flashing a custom ROM will do nothing either?
Click to expand...
Click to collapse
Please try presist resurrector from guides section
I think i've got it back to life.
first tried to flash 7.1.2 stock the earliest one (tissot_images_7.8.23_7.1), it hung on flashing it for nearly an hour with no success, closed the miflash application then tried another 7.1.2 (tissot_images_7.10.30_7.1)flash successful, then in stalled twrp did the persist command and reboot nearly got to the home screen just never getting over the line. then i flashed January 8.0 oreo (tissot_images_8.1.10_8.0) and was able to get on to the home screen/go into settings/enable developer options but it would eventually reboot itself, went back into twrp and did the persist command again and reboot.. success (fingers crossed) now downloading/applying April security update as i type this.
Boo installation problem with the update
looks like i lost my imei, https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restore-imei-permanently-t3759190 this is going to be a pain.. i'll post back when i try this. need a break from this mess ive made lol
thanks for the help/suggestions appreciated big time.
edit: up to the latest update April 1 security patch.
all done, down to 7.8.23 rom, did the stuff to get the imei back then flashed latest oreo rom
emprazol said:
Your timeout for edl mode has passed
You must press power button for 10-15 sec to power cycle the phone
Or open it up and remove battery socket
Or wait for battery drained out
And after that edl will accept hello package
Click to expand...
Click to collapse
Man, I was trying to fix my Redmi Note 4X for the past 6 hours and you were the ONLY guy to talk about this. Thank you so much. :victory:
THANK YOU
udaan said:
it was solved after i changed the usb port on laptop. I got far as installing tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794 image and booting to fastboot and then twrp. But after flashing aosp extended rom it gave me "the system has been destroyed" screen. And somehow recovery is not staying. It apparently gets wiped after reboot.
Click to expand...
Click to collapse
man you just solved my problem and saved for me like 180 eur thank you you are a god !!!! Thanks for using this site !!!!!!!!!! <3 <3 <3
udaan said:
It was solved after I changed the USB port on laptop. I got far as installing tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794 image and booting to fastboot and then TWRP. But after flashing AOSP extended rom it gave me "The system has been destroyed" screen. And somehow recovery is not staying. It apparently gets wiped after reboot.
Click to expand...
Click to collapse
I was unable to flash on MiFlash and after changing USB port I managed to do it!.
Many thanks!
emprazol said:
Your timeout for edl mode has passed
You must press power button for 10-15 sec to power cycle the phone
Or open it up and remove battery socket
Or wait for battery drained out
And after that edl will accept hello package
Click to expand...
Click to collapse
I love you!
Related
================================
Solution: http://forum.xda-developers.com/one...bootloader-locked-t3212187/page2#post63494201
================================
Hello,
This afternoon, I was preparing to flash Oxygen OS 2.1 through twrp but I wanted to make a backup first. Attempting to load up twrp by holding Vol- and Power, my OPT flashed the starting frame of the boot animation for half a second before turning off. This repeated every 5 seconds. I could still boot OOS normally at this stage.
I decided to reflash twrp so as to make the backups, but on attempting to flash it, I saw that my bootloader was locked. So into fastboot mode I went, but trying to unlock it, it did the same as trying to get into recovery. As soon as I sent the command, "fastboot oem unlock", the screen went dark, flashed the starting frame for the boot animation, and promptly when dark again.
I now can't boot up normally, nor can I enter recovery. I can access fastboot mode, but I can't seem to make any changes.
I've attempted to use this solution as well as several other similar ones with no success.
I've had my OPT since 17th of August with absolutely no signs of trouble until this afternoon.
To me, it seems like it could be a hardware issue, but I'd hope it would last more than 40 days.
Any suggestions?
Thanks.
----
x-post: whirlpool, reddit
The same just happened to me, wtf
Makrilli said:
The same just happened to me, wtf
Click to expand...
Click to collapse
What were you doing before it occurred? Perhaps we can work out the cause.
GusGold said:
What were you doing before it occurred? Perhaps we can work out the cause.
Click to expand...
Click to collapse
I'm not sure what I was doing, I was going to flash different ak kernel as my wifi didn't work.
HOWEVER
I read someone suggesting if you still have bootloop after trying the qualcomm recovery tool, try booting to fastboot and use: fastboot continue
my opt booted nicely to hydrogen os and after I shut it down it no longer bootlooped and I was able to get to recovery.
I'll post this to your reddit thread too, maybe it might help somebody one day, hopefully this works for you too
Makrilli said:
use: fastboot continue
Click to expand...
Click to collapse
Mate! that worked for me too!
However... It only seems to skip the bootloop for that power on. After power off, it returns to the boot loop. I also still can't unlock the bootloader and can't access recovery.
But at least it can boot into OS with fastboot continue!
Thank you.
Weird, after the first successful boot I rebooted and a chinese menu prompted me if I wanted to unlock the bootloader, and I did.
Maybe you should try different recovery packages.
But I'm glad to hear you at least got past the boot loop
Makrilli said:
Maybe you should try different recovery packages.
Click to expand...
Click to collapse
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
GusGold said:
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
Click to expand...
Click to collapse
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Makrilli said:
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Click to expand...
Click to collapse
Ahh, do you mind linking me to the one you used?
I think I used this: https://mega.nz/#!EsNQHKab!ifATzg4rxxBniPad0iyxANqlN8cZpUx2MVWaZgEhrD4
but it might have also been this: https://drive.google.com/file/d/0B14IjYN3PtxcSlJ5aGQxX3JERHM/view?usp=sharing
It's also worth mentioning I flashed both a few times before I tried the fastboot continue command so try both a few times and see if that helps, also I replaced the stock recovery with twrp in both recovery packages before flashing.
Edit: And best of luck, I'm rather confident your OPT is going to work properly again.
Boot Loop
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
p3wb said:
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
Click to expand...
Click to collapse
And I'm guessing you have tried the qualcomm recovery tool?
And I'm guessing you have tried the qualcomm recovery tool?[/QUOTE]
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
p3wb said:
And I'm guessing you have tried the qualcomm recovery tool?
Click to expand...
Click to collapse
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.[/QUOTE]
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT
Makrilli said:
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
Click to expand...
Click to collapse
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT[/QUOTE]
I finally got my OPT working again, tried Qualcomm recovery tool, wasn't able to complete the "MSM8994DownloadTool"
So i downloaded "A2001_14_A.03_150805" in a guide from technobuzz.net/unbrick-oneplus-2/
A similar but it does a entire wipe of the phone, nothing left at all. WARNING!
But i was okey with it.
Well the phone was in Chinese when it was all done but to change language was no problem.
I finally managed to solve it on mine. I had been cautious over the past weeks to not let it run out of battery or get turned off while away from my computer as
Code:
fastboot continue
was the only way I could get past the boot loop.
My core issue to solve was that I couldn't get it recognised as the USB Diagnostic 9006 under Ports in Device Manager. I installed the driver from here manually by right clicking the /qcser/x64/qcser.inf file and selecting install from the context menu. Then, I powered off my OP2. While only holding Vol+ (not power or Vol-), I plugged in my OP2 to the computer and it was finally recognised as the 9006. Then using the recovery tool from the prior link, it installed and rebooted my OP2. The moment of truth was when it rebooted and didn't enter a boot loop!
Then with the Chinese recovery prompt, I selected the top/first option and it brought me to the welcome/first setup screen of OOS.
It wiped the internal memory, and installed OSS 2.0.2 (don't know if coincidence or not as that was my prior OS as well). Now to install twrp and update to the latest OOS hopefully without a hitch.
Happy to finally know it wasn't a hardware issue like a failed eeprom or a dud nand controller as my prior phone (Samsung Note 10.1) died to a failed nand controller as well.
Will update with news of twrp and OOS, but I feel that should go smoothly now. Thanks to the others that helped in this thread too!
Yeap, all good!
Flashed official twrp through fastboot and batch installed OOS2 through 2.1.1 patches and SuperSU. Everything working like new!
Phew.
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
gamdiiii said:
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
Click to expand...
Click to collapse
Is it recognised as a USB Diagnostic 9006 in your device manager?
Hi GusGold No its 9008
Hi all!
Here is a little problem that i didn't solved.
i have a N910F Note 4 that likes to boot loop . I received it as it is and don't know what caused it(i suppose that was a rooting issue because had the knox value 1)
During the all time, PC and MAC were unable to recognize the Note 4, despite of repeatedly reinstalled drivers(older and newer versions) , Keys and Smart Switch were unable to recognize the device, PC is failing to install the MTP driver for some reason. I changed the USB ports,restarted,updated drivers,updated windows etc. -NO RESULT. BUT : Somehow Keys is able to run recovery and initialization and install it on the device while saying Connecting device... , phone also doesn't appear in device manager or file explorer as external drive.NOTHING! Odin and Jodin says ''added!'' and starts the job with no comments
1. I tried different versions of boot loaders with different versions of ROM (all for my specific model) with no result.
The end of the boot is when Samsung logo ,sound and graphic appears but freezes before actually starting OS, then restarts. IT keeps restarting until battery goes off(even while connected to pc by usb!!! ). Then starts to charge the battery normally.
It boots in recovery and download mode with no problems, it did every time i flashed it…
2. I tried different versions of boot loaders with stock roms , custom kernels etc...and the problem was the same
3. I tried to flash with Odin the stock 4.4.4 without problems but….the problem was the same
4.I tried Device recovery and initialization with Keys and here something interesting happened:
First time when i did it, it went over the samsung logo and booted. I selected language,i skipped wifi network selection and i accepted the user agreement. No matter how fast i was moving, the boot loop didn't went over the user name selection which is after the user agreement. Then freeze and boot again.
Second time when recovered with Keys (tried more stuff in the mean time) it went over the logo and started to update like…''updating applications 2of 17'' the max reach point was ''3 apps of 17'' and then freeze and reboot
I am out of ideas so i suspect that the battery might be dead because it gets empty even if is charging while phone is ''boot looping''. I ordered a battery,should arrive soon.
If that don't work…i am gonna spend some cash and sent it to Samsung for repairs (i bet that it won't be cheap because they will probably tell me that is the motherboard fried so they make you pay for being a bad boy and tried to root). Far as i know is not a brick as long as download mode and recovery works just fine.
Is here someone that has any new ideas for bringing this phone to life? Any help is well received , maybe i skipped something….
Thank you in advance.
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Battlehero said:
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Click to expand...
Click to collapse
That was the first thing i tried , cache wiped also. After every rom when booting failed.
UPPME said:
That was the first thing i tried , cache wiped also. After every rom when booting failed.
Click to expand...
Click to collapse
Uninstall Kies, and install Samsung USB drivers: https://www.androidfilehost.com/?fid=24052804347849220
Take the battery out, leave it for approximately 10 seconds, enter the battery back in.
Hold volume down key + Home key and power on the device.
Then plug the mobile phone into the computer.
Run Odin as Admin: https://www.androidfilehost.com/?fid=24052804347851815
Then flash the firmware in the AP section.
Make sure that the firmware is for your region, you can download it from Sammobile or SamFirm.
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
kerbiii said:
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
Click to expand...
Click to collapse
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
UPPME said:
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Click to expand...
Click to collapse
if you can stay in recovery mode and download mode for more than 10mins i think its not battery problem, i think i have corrupted system files, i left my note 4 to samsung service center a while ago i will get it tom, i just hope they wont charge me too much for it,
uldyzjan said:
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
Click to expand...
Click to collapse
nah it doesnt work thats the first thing I do, that only work on ordinary bootloop
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
kerbiii said:
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
Click to expand...
Click to collapse
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
guts100 said:
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
Click to expand...
Click to collapse
yes thats the good thing and its under warranty even though im already rooted, with knox 01 and custom binary haha, i was already expecting to pay a huge amount of money but they said they will cover it, so its a blessing, but i hope the OP fixed his problem.
HI, I will get right to the point. My phone is Honor 7x (BND-AL10C675 INDIAN) I screwed it up.
Now, the fastboot or recovery or E recovery nothing works!!
There is only one screen which keeps coming in a loop rebooting with a vibration
It says " ERROR MODE"
ATTENTION!
PLEASE UPDATE SYSTEM AGAIN
ERROR! FUNC NO : 8 (HIFI IMAGE)
ERROR NO : 1 (SECURITY VERIFY FAILED)
It keeps rebooting and the phone doesn't even turn off. I tried the download mode (Volume UP & Down Power button, SAME SCREEN comes up)
Let me know if you want me to write a detailed version of how I got here or ask any specific questions.
Now, all I need is at least FASTBOOT so I can do something about it. Is there anyone who can help? I hope SOME PRO OR A GEEK is able to solve this issue magically. I just can't tell you what I'm going through.
UPDATE:
As Christo31 requested and maybe it's useful for other people to help me out. Here is what I did. It's a real long story!!
I have Honor 7x (BND-AL10C675 INDIAN) I had unlocked bootloader and twrp and I was on emui 8 beta which I flashed manually using one of the tutorials here on the forum. One day, I decided to get back to stock as I was stuck in emui 8 beta and no OTA updates so I downloaded the emui 8 stable rom from firmware finder and put it in sd card "dload" folder. Now, for this method to work, we need to relock bootloader and flash stock recovery which I did and it completely wiped everything out.
Now, the "dload" method fails at 5% every time. I tried different roms for this very model but no it doesn't work. (Also, my build no. was stuck at B141 for a long time no matter what rom I changed : Yes, this is stupid, I should have fixed it first) Maybe that's why the "dload" method doesn't work.
So, in this forum I saw some with similar issue but somewhat different " Frp locked & bootloader unlocked" and I was told that the DC phoenix software might fix this and I bought some credits and used the software. Here's what I discovered
My observations with the software:
* I put the phone in fastboot and downloaded the update.app full Ota (same one emui stable) and tried to flash. The software flash well ok as it says "the software is written" but the phone doesn't boot and goes directly into the recovery mode and again the bootloader and frp are locked.
*Here, I noticed that it shows something like "opening backdoor" and then the Bootloader status goes to red and says "UNLOCKED" it means it was definitely doing something so the next I repeated the same process but as soon as the phone was "UNLOCKED", I pulled the usb cable out and I kept my command ready and tried "fastboot flash recovery_ramdisk recovery.img" and guess what it flashed that twrp file and I could see in the command line that it went "okay" so I immediately booted to recovery but again the stock recovery comes up. Also, I tried system.img also it flashes fine but phone doesn't boot. Same recovery.
REMEMBER: THE ABOVE STEPS MAY WORK FOR PEOPLE WHO HAVE UNLOCKED BOOTLOADER BUT FRP LOCKED. IN MY CASE BOTH ARE LOCKED SO THAT'S THE DIFFERENCE.
* I tried another update.app I guess it's BNDL22.ZIP or something and this time the software was trying to flash in "upgrade mode" and somehow the recovery was broke. There was some "ERROR MODE" basically the recovery was broke. I didn't care much. Although flashing another update.app would have fixed it.
* The next step I tried after a lot of trial & error for about 1.5 days. This time I did the same when the bootloader was unlocked, I pulled the cable and tried the command "fastboot oem unlock unlock code" ( I should have got this idea before, I mean it's a mess guys, I didn't sleep for too long) and I was shocked to see that it showed the options "Unlocked bootloader yes or no" and I clicked "yes" and I jumped hoping that it's over but... I ended up with 'ERROR MODE' which I described above.
* I feel, because the recovery was broken, it ended up in error mode. Just imagine if my recovery was fine and then I tried this command then it would have erased everything and maybe I might have been presented with fastboot screen with both "frp & bootloader Unlcock" or at least 'bootloader unlock" in either way, I could have flashed a 'system.img' and get into settings and BEATH THE HELL OUT OF THAT "ENABLE OEM UNLOCK' in settings. The rest you know.
I wrote this not just because someone might help me but because a lot of posts on this forum really helped me a lot and posts like these can help a lot of people down the road.
Now, my phone is still in the same loop. Reboot, Honor logo, Error mode...REPEAT
I heard that once the phone drains down completely, we may get back fastboot. Fingers crossed. Sadly, I have Mac so I borrowed windows laptop for this purpose from a friend. This is the last day and I guess I'm going to put it on sale and sell it as a scrap or something for display and stuff.
How much does motherboard cost? anyone any ideas? if it's below 4K or about 80$ then I might go for the repair if nothing works!!
I'm going to update on this very soon. Le'ts hope for a miracle. Either way my HONOR 7X IS A LEGEND.
UPDATE :
After waiting for hours, my phone got discharged and I curiously plugged in the phone pressing "volume down" button OR power + volume and all other types of combinations but the phone just goes to the same "ERROR MODE' and keeps going in the same loop.
So, I really hate Huawei for not providing stock firmware or some type of recovery for people like me to get back to stock. For example : Xiaomi has that fastboot ROMS which you can easily flash in EDL mode no matter what happens to you and of course some other ways to recovery the bricked phones.
The Huawei E recovery?? What the **** is it? Does it ever work? It's some kind of a joke. The hisuite is again **** It says 'My model is not supported" and it only showed me two very older and ancient models that are supported for recovery.
I'm not expecting warranty but at least they should give the service for the customer. Did I tell you that this phone was in Service centre for three days when it had FASTBOOT, RECOVERY, E RECOVERY working. They could n't fix it in 3 days so I rushed them to get my phone back hoping that I would recover it with the above method.
Now, I got the Redmi Note 5 Pro and my 7X is a dead brick and I'll try selling it as scrap for display etc...
Finally, I really love the XDA forums and the friendly members who are very helping and so empathetic. Thanks guys, you are the best
I'm not leaving. I'll see you on the other side. I mean, the Redmi Note 5 pro development. Keep hustling
You need to tell us what you did exactly first for any help
Thetpcguy said:
ERROR! FUNC NO : 8 (HIFI IMAGE)
ERROR NO : 1 (SECURITY VERIFY FAILED)
Click to expand...
Click to collapse
when you are in this situation
- Keep press "volume down" + "power button" for about 10 seconds, the phone will reboot
- When the phone reboot, release the "power button" but keep "volume down" and in the same time plug the micro usb cable ( you have to be ready and quick )
the phone will boot in FASTBOOT&RESCUE MODE ( hope you have unlocked bootloader and frp unlocked )
azerty11 said:
when you are in this situation
- Keep press "volume down" + "power button" for about 10 seconds, the phone will reboot
- When the phone reboot, release the "power button" but keep "volume down" and in the same time plug the micro usb cable ( you have to be ready and quick )
the phone will boot in FASTBOOT&RESCUE MODE ( hope you have unlocked bootloader and frp unlocked )
Click to expand...
Click to collapse
Hi, thanks for your help but the phone doesn't turn off. it just keeps rebooting and there is honor logo and then error mode and then phone reboots and the same cycle. I tried what you said also with other possible things but I guess I need to let the battery drain out completely as some people said it worked for them. It's almost 9 hours and it's still not drained (it was on full charge) anyway Fingers Crossed!!
christo31 said:
You need to tell us what you did exactly first for any help
Click to expand...
Click to collapse
HI, I Updated the post in full details. I hope my phone is rescued.
Let the battery drain, and then try to get into fastboot using key combinations. Let me know if you can do this, from there on you can proceed normally.
vaasu_g_wills said:
Let the battery drain, and then try to get into fastboot using key combinations. Let me know if you can do this, from there on you can proceed normally.
Click to expand...
Click to collapse
It didn't work out. It only boots in error mode and keeps going in a loop.
Thetpcguy said:
It didn't work out. It only boots in error mode and keeps going in a loop.
Click to expand...
Click to collapse
Did you try huawie suite system recovery??
vaasu_g_wills said:
Did you try huawie suite system recovery??
Click to expand...
Click to collapse
I never heard of it I'm googling it now and please throw some light on this but strangely your message got my hopes up.
UPDATE: Oh, I guess you are talking about Huawei Hisuite. I did try that and it didn't work and I included that in my post above as well. I still have my phone with me completely discharged.
Thetpcguy said:
I never heard of it I'm googling it now and please throw some light on this but strangely your message got my hopes up.
UPDATE: Oh, I guess you are talking about Huawei Hisuite. I did try that and it didn't work and I included that in my post above as well. I still have my phone with me completely discharged.
Click to expand...
Click to collapse
and with phone , off, totaly discharged, holding volume down, and plugging in the usb cable , just gives you same error mode?
---------- Post added at 10:59 PM ---------- Previous post was at 10:27 PM ----------
[/COLOR]Follow this steps.
1. Just flash with Dc phoenix
3 extract two update. App with huwai firmware extractor.
4. Check the log of dc phoix. Check which files are not flashed. By comparing with extracted files You will observe some files are not flashed. (some files are not in log of dc phoinix) Like Vendor.img product.img cust.img etc.. Note down which imgs are not flashed..
5. Now use multitool and go to unbrick option. There will be option of flashing around 5 img. Flash the 5 imgs. You will get this 5 img from extracting Update.app
6.then your phone will be working but not perfectly. Flash TWRP with fastboot.
7. Aftee flashing TWRP flash all other imgs which were not flashed by dc phoenix.
Then boot. Your phone must be good.
And again if you want then re flash with HWOTA tool. Your phone will be running now.
mrmazak said:
and with phone , off, totaly discharged, holding volume down, and plugging in the usb cable , just gives you same error mode?
Click to expand...
Click to collapse
Yes, even after that it give the error mode and goes on the same loop. Honor log, Error Mode, Reboot...REPEATED LOOP
I Already gave up on this phone but only a miracle can save this phone now.
Thetpcguy said:
Yes, even after that it give the error mode and goes on the same loop. Honor log, Error Mode, Reboot...REPEATED LOOP
I Already gave up on this phone but only a miracle can save this phone now.
Click to expand...
Click to collapse
i more question for you. Please . Does the three button combo from power off attempt to show update screen. I know for everyone the dload method is failing at 5%, but still need to know if yours is attempting this or not even try.
There might be dload method that works, according to posts on 4pda.ru
mrmazak said:
i more question for you. Please . Does the three button combo from power off attempt to show update screen. I know for everyone the dload method is failing at 5%, but still need to know if yours is attempting this or not even try.
There might be dload method that works, according to posts on 4pda.ru
Click to expand...
Click to collapse
I tried that also. Power+Volume UP+Volume Down to get into download mode but it just goes into that "ERROR MODE'
Normally, it should but maybe because I broke my stock recovery also and then tried to unlock the bootloader when the frp was locked with the DC phoenix trick (Pulling out the plug) that it's really screwed up beyond all this. Let me know if you want me to post pics or maybe if the clips canoe uploaded here, I will make short clip with what's happening. I guess I need some factory or manufacturer level stuff or I need to replace the motherboard. BTW the local guy told me it costs 8K INR which is around 125-130 USD which I'm not willing to spend. I got Redmi Note 5 Pro and I'll probably never ever buy Huawei phones ever.
ANYONE HERE WHO CAN DONATE THE MOTHERBOARD, PLEASE PM ME:laugh:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
pleasuremann said:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
Click to expand...
Click to collapse
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
levone1 said:
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
Click to expand...
Click to collapse
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
pleasuremann said:
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
Click to expand...
Click to collapse
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
levone1 said:
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
Click to expand...
Click to collapse
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
jayeffpee said:
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
Click to expand...
Click to collapse
Does fastboot work? Also, what do you ultimately want to do, return to stock?
levone1 said:
Does fastboot work? Also, what do you ultimately want to do, return to stock?
Click to expand...
Click to collapse
yes, after hard work to install drivers, I managed to get the phone to be recognized by Flashtool in fastboot mode. But the phone is not charging when turned off, and its not rebooting. I wanted to try again with stock ROM, since I got some battery issues with LineageOS (phone turned off while playing some games, and worked fine while doing the same with usb cable charging to laptop or AC charger.)
But I cannot do anything right now. Only fastboot mode and force restart works, but it stuck in Sony logo (after normal bootloader unlock 5 seconds warning). What can I do?
Hi!
I used my S7 Edge for a couple of years and now I am afraid it may have died on me. As always, backups of f.e. pictures are not up to date.
During the night, it lay on my Qi charger. When I took it in hand, the screen was extremely dark and stuck in the "loading Lineage" screen. I tried to reboot. It was stuck on the "Samsung Galaxy" screen.
I wanted to boot into recovery and wipe the cache and see if it works again. But I can't boot into recovery mode. No matter if I connect it to a USB cable, the button command does not work.
Switching the device off also isn't possible. The only way to switch it off is disconnecting the battery (I have opened it to do so).
The only thing I can do is booting into download mode (so I know my volume up button works...).
Several times the screen was stuck on the "empty battery" symbol - which did not change no matter how long I had it in the charger. I can't really replicate how I got to the battery screen. I installed another battery just to see if if by some magic this would change something, but nothing changed about my issue. No boot possible and no booting into recovery.
I thought to myself: Well, maybe if I reinstall TWRP I can get into Recovery again. But when I try Odin I get the error message: "there is no PIT partition"
I know you will want additional info:
sadly, I cant' say which version of lineage I had running. I would have to look into my phone - which I can't.
I installed Lineage a couple of years ago, the phone was rooted and had TWRP recovery. I changed my USB port and Audio port several months ago.
But everything was running fine - I did not change or do anything recently. It happened overnight.
Do you have any ideas what I can do? I am brooding for two days now over this issue and I am at the end of the line here.
Did my memory just die on me? Is it an unfixable hardware issue?
Or software-related and potentially salvageable?
thanks in advance for anybody that bothers with my problem.
PinkElf said:
Hi!
I used my S7 Edge for a couple of years and now I am afraid it may have died on me. As always, backups of f.e. pictures are not up to date.
During the night, it lay on my Qi charger. When I took it in hand, the screen was extremely dark and stuck in the "loading Lineage" screen. I tried to reboot. It was stuck on the "Samsung Galaxy" screen.
I wanted to boot into recovery and wipe the cache and see if it works again. But I can't boot into recovery mode. No matter if I connect it to a USB cable, the button command does not work.
Switching the device off also isn't possible. The only way to switch it off is disconnecting the battery (I have opened it to do so).
The only thing I can do is booting into download mode (so I know my volume up button works...).
Several times the screen was stuck on the "empty battery" symbol - which did not change no matter how long I had it in the charger. I can't really replicate how I got to the battery screen. I installed another battery just to see if if by some magic this would change something, but nothing changed about my issue. No boot possible and no booting into recovery.
I thought to myself: Well, maybe if I reinstall TWRP I can get into Recovery again. But when I try Odin I get the error message: "there is no PIT partition"
I know you will want additional info:
sadly, I cant' say which version of lineage I had running. I would have to look into my phone - which I can't.
I installed Lineage a couple of years ago, the phone was rooted and had TWRP recovery. I changed my USB port and Audio port several months ago.
But everything was running fine - I did not change or do anything recently. It happened overnight.
Do you have any ideas what I can do? I am brooding for two days now over this issue and I am at the end of the line here.
Did my memory just die on me? Is it an unfixable hardware issue?
Or software-related and potentially salvageable?
thanks in advance for anybody that bothers with my problem.
Click to expand...
Click to collapse
Hi, try to flash the stock firmware otherwise I really don't know :/
I guess I will lose my data when I install stock firmware, don't I?
What I ask myself is: Is the reason for not being able to boot into recovery that my device always thinks my battery is empty?
Is the fact that I can boot into download mode a sign that my memory and/or motherboard is still intact?
PinkElf said:
I guess I will lose my data when I install stock firmware, don't I?
What I ask myself is: Is the reason for not being able to boot into recovery that my device always thinks my battery is empty?
Is the fact that I can boot into download mode a sign that my memory and/or motherboard is still intact?
Click to expand...
Click to collapse
Are you using Lineage OS? If yes, then definitely yes. On my Xiaomi, I couldn't get into fastboot mode or into recovery, I don't know why and somehow I got there, I don't even know how I think I held the power mode for a long time and when the phone turned on I held the volume up button to get into recovery finally succeeded on the umpteenth attempt and from recovery I restarted the phone in fastboot mode and flashed the stock firmware. And yes, being able to boot your phone into fastboot is a good sign. It would be worse if it wasn't possible.
I am still stuck with the problem. I can boot into download mode. I can't find a way to boot into recovery.
Is there anything I can do in download mode?
If I find the lineage version I originally installed on my device, could I install it via ODIN and get my phone back without data loss? I have only ever installed ROMs via TWRP.
Just an idea, but as of now I get the error "could not find PIT partition" anyway while trying to reinstall TWRP.
PinkElf said:
I am still stuck with the problem. I can boot into download mode. I can't find a way to boot into recovery.
Is there anything I can do in download mode?
If I find the lineage version I originally installed on my device, could I install it via ODIN and get my phone back without data loss? I have only ever installed ROMs via TWRP.
Just an idea, but as of now I get the error "could not find PIT partition" anyway while trying to reinstall TWRP.
Click to expand...
Click to collapse
Yes, you can use download mode to install the firmware via Odin. Look
That means giving up hope for my personal data...
But even if I want to do this, I run into the problem, that I can't install anything due to "could not find PIT partition"...