Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
Hi,
My friend has bought a SGS7 because his SGS4 faced a problem, so he gave to me to fix it
The problem is as follows:
The phone sees the sim after maybe 5-10 minutes AFTER booting up and then 5-10 min after that it vibrates twice and than reboots its self. When the phone boots up and i try to view the imei by *#06# there is no response however a while after that when the sim is recognised the imei box pops up. Even without the sim the exact same things happen
#*The top part of the screen is gone slightly pink I think thats because its due to overheating as the phone is hot when for example is charging and not being used or when the phone is used to play spotify with the screen turned off dont know if this will help anyone the casue of the modem disfunctioning but the screen is pinkish where the processor and the sim is so...*#
Now i have tryed some troubleshooting withut success i have done as follows:
I've changed the sim tray which didnt help at all
I put tape on the sim/sdcard conncetor to add more pesssure (worked for other) without success
Tried to downgrade to 4.4.2 to change modem as there is no mode for the lolipop version of the stock rom
And lastly i have applyed the 4.4.2 modem to 5.0.1 that did nothing to the system
Please help me i have searched trough google and found out that this only happens when downgrading for lolipop to kitkat but he has never done anything to the phone no root not even a screen repair (where im based there are may scamers who replase the screen and than say the for the screen to work that had to modify the system thanks to that they charge more for the repair)
Please help, anyhelp is useful
cheers
Anyone?
the_ziom said:
Hi,
My friend has bought a SGS7 because his SGS4 faced a problem, so he gave to me to fix it
The problem is as follows:
The phone sees the sim after maybe 5-10 minutes AFTER booting up and then 5-10 min after that it vibrates twice and than reboots its self. When the phone boots up and i try to view the imei by *#06# there is no response however a while after that when the sim is recognised the imei box pops up. Even without the sim the exact same things happen
#*The top part of the screen is gone slightly pink I think thats because its due to overheating as the phone is hot when for example is charging and not being used or when the phone is used to play spotify with the screen turned off dont know if this will help anyone the casue of the modem disfunctioning but the screen is pinkish where the processor and the sim is so...*#
Now i have tryed some troubleshooting withut success i have done as follows:
I've changed the sim tray which didnt help at all
I put tape on the sim/sdcard conncetor to add more pesssure (worked for other) without success
Tried to downgrade to 4.4.2 to change modem as there is no mode for the lolipop version of the stock rom
And lastly i have applyed the 4.4.2 modem to 5.0.1 that did nothing to the system
Please help me i have searched trough google and found out that this only happens when downgrading for lolipop to kitkat but he has never done anything to the phone no root not even a screen repair (where im based there are may scamers who replase the screen and than say the for the screen to work that had to modify the system thanks to that they charge more for the repair)
Please help, anyhelp is useful
cheers
Click to expand...
Click to collapse
I'm having the same issue.
Fresh wipe and install corrects the error but once the battery goes flat I lose all connection except WiFi.
Non of the *# codes seem to work either.
Any help would be appreciated.
Thanks
Model : Yureka A5510 [not plus]
my phone was working perfectly .. no issues at all.. after JIO 4g launch. I read some of the articles to enable VoLTE without using JIOVoice application. I though to enable VoLTE.. and tried to install a firmware for my Yureka A5510.
and I hardbricked my phone. Just redlight blink on top left cornor. NO BOOT, NO FASTBOOT, NO RECOVERY
I googled. and found some article to unbrick by flashing eMMC image on SD card to bring it in to fastboot mode. (using six pins on the motherboard and key comnbination)
finally I am succeed to flash the STOCK firmware by FASTBOOT.
But I lost the IMEI, so NO network.. again googled a lot and I made the IMEI fix with the help of QXDM Tool.
now the problem is with the touch screen. it works fine after a restart untill I press the Lock / unlock button.
After Unlock the touch pointer shows on different locatoin and lower 1/4 part doesn't respond.
I enabled developer mode and enable show touch points... that tells me the location of the touch.
I AM PRETTY MUCH SURE IT IS NOT A HARDWARE ISSUE, BECAUSE IF WORKS FINE IN RECOVERY MODE(CWM RECOVERY) AND ONCE AFTER EVERY RESTART.
.. CAN YOU HELP ME .. PLEASE.
PLEASE TAKE SOME TIME AND READ IT.
I have same Yureka model YU5510A and i soft bricked my phone when i was flashing VoLte Rom. It's been 1 whole month and i haven't found any solution. i tried flashing through CM recovery and fastboot and YGDP tool but non of it works. I am so pissed off. Did you find any solution bro?
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
undulus said:
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
Click to expand...
Click to collapse
Hi, open ur phone again and check the display connector, try fully disconnecting it and reconnecting it and check if all other connectors in range are also properly connected. Then reassemble ur phone.
Next time, do not open your phone unless you really have to. I don't see why you have opened to reset it. You can press power for very long then after maybe 30 seconds or so, your phone will fully turn off. No need to open it for that.
Next time if you have a question, use the Q&A section, not this one. You'll get answers quicker there too.
Bricked or screen is broken
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
undulus said:
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
Click to expand...
Click to collapse
if that worked, i'd be curious to know
Hello friends,
I will tell you my sad story, I have an MiA1 obvious with AndroidOne and I wanted to put Miui and then the point is that brick the black screen and the notification LED flashed and then as I could apply a flash with a rom to download from the xiaomi page and I am but the point is that I have no signal because I do not have Imei I can not connect to a wifi network but apart when I turn on the phone starts android is allowed to use for a minute or two and reboots I'm desperate looking for solution please someone to tell me what I can do :crying::crying::crying: