Database Users

[Q] BOOT-LOOP problem On The device ZTE V970(Parallel To "Garnd X")

Hi there ,
I came to you after a lot of searching for a place that maybe can help me in case problematic.
I have a device from the famous " ZTE " .
About a month ago the device started to make himself turning on and off and then suddenly shuts down once more and since than he never turn on again.
What happens is that I turn on the device is coming up with the company logo and again and again.
The device has a root and recovery - and when I press the power button and volume up button device comes to recovery .
I tried almost everything,to replace Rom , delete everything from the device through recovery ( WIPE ) and even tried to burn the original stock Rom device company's computer via flashtools - but without success ( in my opinion the problem is Drivers - computer fails to recognize the device ) .
I already went to a lot of labs in my country, but none of them agreed to help me / could not help me.
Htiitzati with a lot of savvy people and they say that the problem is hardware - and not in parts.
Is there any chance you could help me?
Sagi .

UP - i must to get help !

sagi98 said:
UP - i must to get help !
Click to expand...
Click to collapse
How about you post on the right section?
This is zte blade, it has nothing to do with zte v970
Check my sig, to install custom roms, and recovery

[HELP] How To UnBrick Hard Bricked LG E400 Using QPST

Hello,
I Hard Bricked My LG Optimus L3 E400 And On The Forums Somewhere I Found A Method Using QPST I Can Unbrick IT!
I am Not Able To Turn On The Device! (When I Try To Switch IT On IT Just Vibrates Once)
I am Not Able To Use Any Key Combos {For E.g Recovery Or Emergency Mode} (The Capctive Buttons Light Up For A Second Or Two, The Device Vibrates And Then Again Dead!)
When I Try To Fix IT Using QPST I Get An Error "Unable To Acquire A Lock On The Selected Phone"
How To Fix This??
I Used The Following Method ---->
Used Lg Extract To Unpack Kdz File (V10L_00.kdz)
Used DzDcrypt To Unpack The cab File I Got After Unpacking KDZ File!
It Needed A EMMCBLD.hex File For The Device Which I Could Not Find! So I Used bin2hex Converter And Converted emmc_appsboot.bin to EMMCBLD.hex
The ARMPRG I Used Is MSM7225A (NAND Flash)
Boot System - Multi Img 1.0
Please Help Me And Tell Me What Wrong I Am Doing PLEASE HELP ME!! PLEASE!!
Screenshots :

Turn off your phone, remove the battery and connect your phone to your PC. Then you should see animation shoving you to put battery in and put the battery cover back, while it's shoving you that, your phone is in so called "download mode".

mr_techno said:
Turn off your phone, remove the battery and connect your phone to your PC. Then you should see animation shoving you to put battery in and put the battery cover back, while it's shoving you that, your phone is in so called "download mode".
Click to expand...
Click to collapse
Well Bro I Can Enter The Download Mode By
Remove Back Battery> Plug In USB While Holding Volume Down Button

I have the same problem plz give me solution or your contact no so that I can talk to u for solution mine no is 9988911729. Plzplzpl

robin ck said:
I have the same problem plz give me solution or your contact no so that I can talk to u for solution mine no is 9988911729. Plzplzpl
Click to expand...
Click to collapse
Hello, Are You Still Stuck With The Problem?
Sorry For Replying WAY TO LATE

problem
AppY.fTw.wOw^ said:
Hello, Are You Still Stuck With The Problem?
Sorry For Replying WAY TO LATE
Click to expand...
Click to collapse
yes bro

robin ck said:
yes bro
Click to expand...
Click to collapse
Well then i would suggest to go to a local mobile repair shop they will charge around 600 INR!
The Problem is we can no more flash the phone using USB ports, we need a serial port and a RIff Box JTAG Tool Which Requires Soldering Job So Better Let Them Do It!
I Did The Same Thing
Hope You Get It Fixed ASAP!

How to fix a galaxy j1 SM-j100h hard brick

Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.

I tryed many solution but no one work, please if someone have the some problem tell me.

Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app

i'm working on this problem..
i resolved,
share there

OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.

same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???

caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.

xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it

guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?

i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:

Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.

Help
I have same problem,hard brick.Can anyone help?

somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:

kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66

If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...

xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.

same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.

J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help

SM-950F Hard bricked, JTAG?

Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?

S8 Hard bricked
A_Bad_Marksman said:
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
Click to expand...
Click to collapse
hello!
same happened to me ......dont worry i will help u....
i think u flashed aosp rom
phone is not hard bricked its still not turned off believe me........
do the following:
donot charge phone for atlesat 24 hours .......
after 24 hours try to boot into download mode press button for like a minute it will work in multiple tries,,
immediately flash twrp and when flashed successfully suddenly press vol down + bixby + power it will boot into recovery
charge for 1 -2 hours , clear system and every thing if you have backup thats good other wise flash firmware......donot turn in till flashing the system and data in recovery mood......boot into download mood from recovery and there you go....if still a problem inbox me

Thanks, I'll give it a shot

ok let me know then

Jtag dead phone to life and rewrite IMEI
I had the same thing, sent it to Fonefunshop in England, they said they could fix it, the didn't even open it as discovered by the guys who fixed it and is necessary to use jtag.
Fonefunshop said eMMC chip was bad, which is not true, but that led me to search for someone to replace the chip. I found A2Z cellular in Ottawa, Canada. They got the phone to boot up, but IMMEI was null( I did this trying to flash back to stock after TWRP screwed up). They rewrote original IMEI , now phone works like new. These guys are amazing.
http://a2zcellular.com/

Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30

A_Bad_Marksman said:
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
Click to expand...
Click to collapse
I have been through that situation man.... So always ready to help, ??

Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?

Your phone is connected in edl download mod. It will accept special files which will allow it to boot to download mode and let you flash stock firmware
The tool used for this is emmcdl.exe
It has to come with phone specific files
No idea where to get it. Ask people here, those who root phones. They know.

unable to flash lenovo a1000

Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.

Sisine said:
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Click to expand...
Click to collapse
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard

Vuk1152 said:
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Click to expand...
Click to collapse
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !

Sisine said:
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Click to expand...
Click to collapse
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"

Vuk1152 said:
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Click to expand...
Click to collapse
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.

Sisine said:
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Click to expand...
Click to collapse
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)

Vuk1152 said:
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Click to expand...
Click to collapse
I'll try that one, thank you.

Sisine said:
I'll try that one, thank you.
Click to expand...
Click to collapse
np

Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.

CurlyBlonde said:
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
Click to expand...
Click to collapse
sorry, i deleted my lenovo a1000 files to focus on other phones. from what i have heard that issue is common with that phone. i know someone who flashed the firmware on their a1000 and got stuck in the same issue as you. i tried to help them unbrick it but it seems to be impossible. i think you need to do a board replacement if you want to use that phone again. also, i dont think that the phone revisions are that important cause i managed to get lenovo a1000m firmware on my lenovo a1000.