Has anyone seen cases similar to this: https://www.amazon.com/Mangix-Dissi...r=8-5&keywords=nillkin+samsung+galaxy+s9+plus - that just happens to have buttons? I particularly dislike cases that don't have their own buttons, but a cutout for the phone's buttons.
I like the blue one. My S9+ will come tomorrow.
I order always many cases at this site. https://www.sunsky-online.com/view/...on Protective Back Cover Air Case Black .htm
It's way cheaper then amazon and other local sources.
Related
I've been using my Exec for little over a month now, no scratch on the casing nor screen, but I just noticed the tampo print on the side camera and backlight buttons are rubbing off.. No biggie but I'm a bit anal about these stuffs. How is your Universal holding up so far?
As far as the front camera (the one for video calls) is concerned it is okay because my screen protector came with two small round pieces to cover this camera as well as the lense of the main camera.
Yes the print on the backlight button is almost gone after about 1 months of usage. I also find that some marks (about 10 at the moment) developing on the screen side of the cover. This I believe are being formed as the top of the keys rub against the screen side of the cover when it is closed. Rest of the finish I find is pretty good till now with no abnormal wear of the pait work or anything else.
Kind Regards
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
I think all it does is turn the monitor light back on if it's off.. same thing as if you just tab on the screen
joebongo said:
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
Click to expand...
Click to collapse
You have 3 Universals! WOW!
If I am not mistaken, he probably remapped the backlight button to lauch an application. Here is how:
http://forum.xda-developers.com/viewtopic.php?t=34377
yeah, one jasjar with vodafone - rip off data charges and they just wouldn't let me sign up for decently priced data chunks, and it had a dodgy screen, and 2 mda pro's - the first kept crashing so got sent a proper new replacement which is good so far.
keyboard marks on jasjar
hi everybody. i want to use my jas jar with the screen side outwards.. what happens is that i notice the keys of the keyboard tubbing against the metal portion of the cover (the outside) when i turn the screen outwards. will they cause marks on the surface.?
Keys are made of rubber like material so it is very unlikely that it will cause scratch marks. I have a Piel Frama case which has a film like material covering the keys. Thats the best solution if scratching the device is your main fear
hi
using mine in laptop mode ever since i got it in mid oct, no scartches on screen and none of the buttons lost markings and except for two marks on side of screen because of the two elevated rubber protectors, no other scatch or mark any where else on the body.
I dont use any screen portector or any case but always make sure that i dont have anything else in my pocket except Exec like keys etc
hi .. sadly there are no o2 exec or imate jasjar cases availabe here in india. if anybody knows please let me know .. thanks
You can purchase them online from Piel Frama or Brando or PDAir or Proporta....
The pivot worked loose, but there a thread on how to fix it.
Going to try later this week.
bougt it in october, not really been using it but every thing is still ok. It needs resetting very 2 days coz it crashes. it cashes mainly in contacts list and other time during the change over from landscape to portrait.
never had a pda before.
does this happen much to others?
I am an ex Blue Angel owner, and i have had the Wizard for about 7 months now, and the phone is perfect (size, battery, keyboard), however there is one problem that has been bugging me.
I use the standard case, as i like the format. however when i recieve a phone call and i remove it from the case, the screen 8 times out of 10 turns to landscape then back to portrait, and this prevents me answering the phone for 30 seconds or so until the screen turns back, as the hardware buttons dont respond. However i never figured what cused this, until i read through an unrelated post that it was caused my the magnets in the case. and testing this by waving the case over the surface of the phone reproduces this problem.
now i am stunned that they bundled this case with the phone, and i am in the market of looking for another without the magnets i.e snap button.
does anyone know of an an alternative case that is horizontal that has the same belt clip?
i have seen the Krussel Horizontal Case http://www.addonsworld.co.uk/product.php/21636/3384/, but i dont like the detachable belt clip. as i envisage the phone coming off it unlike a vertical case that has gravity and a low pivot point keeping it steady.
has anyone got any suggestions?
I've got the same probleme with my qtek 9100.
Hi Fuzzy [EDIT: and Alex],
some weeks ago I did a search for HTC Wizard on Froogle, and I found a lot of accessories: aluminium hard-cases, new styluses, loudspeaker mountings, modfied desktop stands...
Case-specific search:
http://froogle.google.com/froogle?q=htc+wizard+case&btnG=Search+Froogle
I am sure there is a case that fits your needs.
Greetz
Raubi
unfortunately i have looked through all the 8 pages of hits and there is not a case that is suitable. the nearest to what i want is a case made by sena http://www.senacases.com/cart/home.php?cat=413 however it itself has a magnetic clasp, so will most likely result in the same problem
I want a case like the original with same type of belt clip and without a magnetic clasp. Does anyone have or use such a case, or can confirm that the sena cases arent afflicted with the same problem.
Turn your phone over!!!
When you put the phone in the OEM case, have the screen facing your body (away from the magnetic clasp). This will accomplish 2 things:
1. Prevents the magnet from activating Landscape Mode.
2. Provide extra protection from direct impact for your screen.
I have always done this and never experienced the Landscape issue.
For me that doesnt work, infact it makes it worse i've just removed the phone like that from the case a few times and it change orientation every time. the magnet is contained in the flap and it triggers the screen change every time weather it brishes past the back or the front of the phone.
I have just bought the Krussell case from my first post after not succeeding finding an alternative, i think that with a belt clip it will be unsafe and will stick out much further than the original case, however it does have loops to loop belts through, so that may be the tradeoff i need.
I will let you know how i get on when i recieve the case next week.
what i am most surprised at is either HTC or the mobile carriers not picking up on the problem and selecting a different case.
but the one thing i have figured is that if the magnet is contained purely on the pouch and not the flap (i.e. the flap has metal in it) then this problem would not happen. and if i twisted the phone away from the case when removing it... and ...and ...and..... there would probably be lots of ways to get around it not happening, but in the real world in everyday use when i remove the phone it does happen and it causes me to miss lots of phone calls...
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
jinnosuke said:
Dont want to hijack your thread but since your on the topic of that case anyone try "PDair Book Type"? Is it still possible to press the keys with the plastic over it?... It doesn't look like it, i seems like you would be pressing more than one button at a time with that plastic over the keyboard.
Click to expand...
Click to collapse
I think you'll be able to press the keys, but it wont be as good as without the case. As you said, you'll prolly press several buttons at onces and wont get the same feel when typing.
I've used a Prestige case with magnetic closure for a year or more with my AT&T 8525. Never noticed a problem. I'm now using the case with my Tilt, but that's only been a few days. Haven't noticed anything yet, however.
I'm using the PDAir flip case -- the magnetic stud doesn't affect anything. The plastic keyboard cover isn't too bad -- I haven't noticed any problems with multiple keypresses, but it does affect the feel of the keyboard.
I'm looking forward to the Piel Frama case, which should be coming out in the next few weeks. They had a really good case for my old Wizard that used a narrow leather strap & snap to hold the device in the case; you'd unsnap the strap to access the keyboard.
Depends on the magnet strength and location, there have been a few reports of the magnet turning on the phone. The kaiser keyboard uses a magnetic sensor to turn on the phone when the keyboard opens. I'm using a hip holster with mag and not seeing any issue.
I'd say should anyone have the issue, start a thread with brand/model listed for others to avoid.
I have the Seidio case I originally bought for my 8525.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=394
The two magnets would always "trick" the screen into thinking the keyboard was open and switch it to landscape mode. I always had to wait a few seconds for the screen to switch back when I took it out of the case.
This does NOT happen with the Tilt. The screen stays in portrait mode. I have always liked the quality of the case and the magnets in the flap make it easy to open and shut. So now it is my perfect solution.
no issues here
YodaJM said:
Hey all,
My Tilt is on the way from AT&T, and I'm looking at cases. The cases that seem to interest me all use magnetic studs. Some have said the magnetic studs can keep the Tilt turned on.
The 2 I like the most are the following:
PDair Book Type
ebay "Premium" Kaiser Case
Anyone had any experience with these or other similar cases with magnetic studs in a similar spot causing problems?
Thanks!
Click to expand...
Click to collapse
I have been using a case with two magnetic studs on the flip closure for months now and have had zero issues. Bought mine at Fred Meyers and recomend anyone in need of a good black leather horizontal pouch case to check it out. was 15 dollars and is of the same quality and fit as 40 dollar cases you may see online.
cheers
I've been using a Motorola Case designed for the Q9 with my Tilt and it's worked out quite well. It also has a single magnetic stud closure and I have noticed no issues at all.
I bought the PDair Book Type case same week the Tilt first came out here in the U.S. I have had no problems at all. Non of that shutting off by itself thingy people complain about.
Magnetic cases
Some cases cause screen to wake up, some don't. To eliminate the problem just turn off Slide Wake option in registry. When slide wake is enabled opening the keyboard (or getting too close to a magnet) will wake the screen. Turn this option off and you can use magnetic clasps at will.
Is there a tool that can test/adjust the sensitivity of the Epic's capacitive buttons? Mine seem unresponsive and I'd love to know if the hardware is not sensitive or the software is ignoring the taps.
Something that displays a readout showing which button is being pushed would be really useful.
Thanks,
Jason
there really isnt. its being classified as a hardware issue. i swapped the board out on mine the other day with a returned phone and it started working. taking the phone apart to fix the button at the bottom is a complete pain in the face. and if the gorilla glass faceplate comes out (which needs to happen to swap out the buttons) then it never really goes in correctly. nor does it stay stuck.take it back to sprint and see if you can do a 30 day exchange on it.
Thanks. I got mine at Best Buy and have their insurance. They'll fix/replace it for free but they have to send it to their service center and give me a loaner. I almost replaced it within the 30 days but when I took off the screen protector (Skinomi) to give it back, the keys were working great. I decided to hold on to the phone. Now I have another protector on it (Realook) and am having the same problem. I'm assuming the button is less sensitive than it should be so it works fine without the protector but not well with it. I might have to switch to a partial-screen protector.
So if my buttons are very difficult to press then its an issue and not the general design of the phone itself?
My wife said she has no problems with the buttons so I'm going to have to compare hers to mine.
jasonsf said:
Thanks. I got mine at Best Buy and have their insurance. They'll fix/replace it for free but they have to send it to their service center and give me a loaner. I almost replaced it within the 30 days but when I took off the screen protector (Skinomi) to give it back, the keys were working great. I decided to hold on to the phone. Now I have another protector on it (Realook) and am having the same problem. I'm assuming the button is less sensitive than it should be so it works fine without the protector but not well with it. I might have to switch to a partial-screen protector.
Click to expand...
Click to collapse
Same exact situation. I was using the Realook screen protector and everything worked fine except for the back button. After I took it off I noticed that the back button worked just fine. After using it a little longer I still feel like it's not as responsive as the other three buttons.
jasonsf said:
Is there a tool that can test/adjust the sensitivity of the Epic's capacitive buttons? Mine seem unresponsive and I'd love to know if the hardware is not sensitive or the software is ignoring the taps.
Something that displays a readout showing which button is being pushed would be really useful.
Thanks,
Jason
Click to expand...
Click to collapse
There's a couple of ways you could do this:
Every time you press a capacitive button, it should blink right after it registers. This indicates it was pressed.
Another way is to boot into Clockwork Recovery Mode, goto Advanced, and use the key/button test option that's in there.
I'm also using a Realook screen protector, so far it's the best I've tried. I've used Zagg, Invisishield, StealthGuard, and Amzer protectors and non of them had the clarity or feel of the Realook. It feels and looks like nothing is there, aside from being an oil magnet. Anyhow, I don't have any reduced sensitivity when using it compared to bare.
One trick I use to apply the Realook is cover the whole phone with 4 or 5 strips of scotch tape (overlapping each other) before application, it helps to get rid of all the super fine dust particles that are floating around. Also, use a high power flashlight, and shine its beam across the surface of the screen, it will make all the dust you couldn't see before light up. Have a few looped pieces of scotch tape ready to pluck off dust particles that get stuck on the protector and screen. Then get the Realook protector ready, pull your strips of scotch tape as one from the top and quickly align the protector, pull more tape off and follow with the protector, this insures no dust thats floating around will get on your screen or protector, if some does, you have the flashlight to easily show you and the tape at the ready to pluck them off.
Reason I said the above is because you might have minute dust particles that are creating a gap with just enough space to prevent your capacitive buttons from registering.
I took drastic measures and cut a rectangle hole out of the Realook protector so I could have direct access to the buttons. It is ugly, but it works. The back button works much better now.
Jason
I finally didn't avoid dropping the Blade, although it is in a silicon case wearing outer protector sticker too. It fell face down i think on another item (they were in a fanny pack). Unfortunately, there was a crack all across the display when i checked it out. So i took the phone apart, found the display part that i need in ebay. The thing is every part either clips or zifs, except for the display itself and the volume button. The display was glued on the frame with some kind of stickers, i wonder how i should go about and install the new display, because it appears the two stickers are on the frame and not on the display so i guess there will be no stickers on the new part and the sellers specifically state "instructions not included, make sure you know what to do yourself". I have found instructions on outer screen change, but not for display change. The same applies for the volume button which was glued on the frame. Should i use some kind of glue for the display? And if yes, what kind of glue? Or should i search for these special stickers? And where would i find these, if they re not even mentioned anywhere i looked at? Thanks for any info guys..