How to install ta-1025 on my ta-1000 after the Oreo update - Nokia 6 Questions & Answers

Hello.
Is there any way I can get the original software on my ta-1000? I tried to get the original swipe up menu but I am not able to install it as I got Oreo update and installed it.
Any suggestions or help,* *it is highly appreciated.
Thank you.

Rayhan_azad said:
Hello.
Is there any way I can get the original software on my ta-1000? I tried to get the original swipe up menu but I am not able to install it as I got Oreo update and installed it.
Any suggestions or help,* *it is highly appreciated.
Thank you.
Click to expand...
Click to collapse
yes you can, but the one you will be flash TA-1025 will also be the oreo only
means right now you can flash OREO TA-1025 over your current system
Follow this
Download nougat december OTA and February OREO zip from here
put them to sd card and put it to device
goto recovery
if it shows no command, hit power button+volume up+home button(fingerprint sensor) together for 2-3 times
you will get the recovery menu
now first install december patch
it will give error, dont worry
restart your device, it will directly take you to recovery
now install february oreo
done
hit thanks button if you find this helpful
happy flashing

sltushar said:
yes you can, but the one you will be flash TA-1025 will also be the oreo only
means right now you can flash OREO TA-1025 over your current system
Follow this
Download nougat december OTA and February OREO zip from here
put them to sd card and put it to device
goto recovery
if it shows no command, hit power button+volume up+home button(fingerprint sensor) together for 2-3 times
you will get the recovery menu
now first install december patch
it will give error, dont worry
restart your device, it will directly take you to recovery
now install february oreo
done
hit thanks button if you find this helpful
happy flashing
Click to expand...
Click to collapse
Thank you very much for the suggestion, I will try now and let you know ASAP.

Rayhan_azad said:
Thank you very much for the suggestion, I will try now and let you know ASAP.
Click to expand...
Click to collapse
Sure

sltushar said:
Sure
Click to expand...
Click to collapse
Do I unzip and put the files in the SD card?

Rayhan_azad said:
Do I unzip and put the files in the SD card?
Click to expand...
Click to collapse
Never in the life unzip, just copy the files and flash through recovery

Gonz19 said:
Never in the life unzip, just copy the files and flash through recovery
Click to expand...
Click to collapse
Thank you. When I try to go to recover mode, it shows no command on the screen.
Any solution for this?

Need help, cannot go to recoery mode.
Please

Just hit these three button together, just hit, donot hold it
Volume up+ power button+home button (fingerprint sensor)
2-3 time together
U will get the recovery
Enjoy
Hit thanks button if you find this useful
Happy flashing

sltushar said:
Just hit these three button together, just hit, donot hold it
Volume up+ power button+home button (fingerprint sensor)
2-3 time together
U will get the recovery
Enjoy
Hit thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
i tried many time but nothing comes, is thete any videos regarding this?
And also my nokia 6 is switched off.
Nothing is happening.

Rayhan_azad said:
i tried many time but nothing comes, is thete any videos regarding this?
And also my nokia 6 is switched off.
Nothing is happening.
Click to expand...
Click to collapse
Put it to charging, let it full charge
Put it atleast 3 hours and then try to go to recovery and follow the above command

sltushar said:
Put it to charging, let it full charge
Put it atleast 3 hours and then try to go to recovery and follow the above command
Click to expand...
Click to collapse
Ok i will try after full charge and let you know.

Rayhan_azad said:
Ok i will try after full charge and let you know.
Click to expand...
Click to collapse
Sure buddy
Remember one thing, never put the tnsn on your face when u face some problem
During the tnsn, the problem become more powerful and thus make u feel weak instead of thinking about the solution
We are always here and happy to help you

Do I rename the files? If yes what would be the names.

Ok guys i did what you asked me to do but at the end of the oreo update, it shows error and now i cant start my nokia 6.
Please help.

Rayhan_azad said:
Ok guys i did what you asked me to do but at the end of the oreo update, it shows error and now i cant start my nokia 6.
Please help.
Click to expand...
Click to collapse
i did something very stupid, iafter failing the methods you guys suggested me, my wont wont start so i went and tried to update through OST LA MENA firmware . Now my phone is flashing on and off and sometimes can see the no command screen.
How do i fix this please help me.
my handset is Nokia 6, TA-1000 was on Oreo without swipe up menu.
please let me know soon.

Plrase check the video on the link and help me please.
https://youtu.be/LuGNjN4HW-4

Rayhan_azad said:
Plrase check the video on the link and help me please.
https://youtu.be/LuGNjN4HW-4
Click to expand...
Click to collapse
i cannot even enter recovery mode any more and dont know what to do.
please suggest me a way to get out of this mess.

Rayhan_azad said:
i cannot even enter recovery mode any more and dont know what to do.
please suggest me a way to get out of this mess.
Click to expand...
Click to collapse
Dont get panic, this problem occurs, sometimes when u dont have enough battery at that it happens
You really hardbricked your device
Now
First charge your device, put it for atleast 6 hours on charge
Then if everything goes fine then you could enter to recovery mode
If u could enter to recovery mode then
Please this time keep patience and take long breath and follow the steps carefully
Goto this thread
https://forum.xda-developers.com/no...ink-ota-monthly-updates-t3733784/post75162860
And download TA-1000 OREO ZIP available on downside of first post, ACARGIA WILL BE MENTION THERE
And also December patch that u downloaded earlier
Put both of them to the sd card and then put sd card to the device
If u were able to enter to the recovery mode
Select update from sd card, remember adb sideloaded doesn't work on nokia 6
Now first install December OTA
it will give u error but dont worry
Reboot your device
Now you will see u have 7.1.2 recovery menu
Same select update from sd card
Now this time select oreo that u downloaded just now
At the end, u should be on official oreo TA-1000

sltushar said:
Dont get panic, this problem occurs, sometimes when u dont have enough battery at that it happens
You really hardbricked your device
Now
First charge your device, put it for atleast 6 hours on charge
Then if everything goes fine then you could enter to recovery mode
If u could enter to recovery mode then
Please this time keep patience and take long breath and follow the steps carefully
Goto this thread
https://forum.xda-developers.com/no...ink-ota-monthly-updates-t3733784/post75162860
And download TA-1000 OREO ZIP available on downside of first post, ACARGIA WILL BE MENTION THERE
And also December patch that u downloaded earlier
Put both of them to the sd card and then put sd card to the device
If u were able to enter to the recovery mode
Select update from sd card, remember adb sideloaded doesn't work on nokia 6
Now first install December OTA
it will give u error but dont worry
Reboot your device
Now you will see u have 7.1.2 recovery menu
Same select update from sd card
Now this time select oreo that u downloaded just now
At the end, u should be on official oreo TA-1000
Click to expand...
Click to collapse
thank you very much. The thing is the phone was flashing all night and its becone hot as hell. Will yhe flashing stop if i full charge it?

Related

[Q] by mistakely formatted /boot

can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.
In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here
forumber2 said:
In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here
Click to expand...
Click to collapse
no....its not giving any response
aashi02 said:
no....its not giving any response
Click to expand...
Click to collapse
You must install a offical firmware if storage doesn't show in blue screen.
forumber2 said:
You must install a offical firmware if storage doesn't show in blue screen.
Click to expand...
Click to collapse
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake
aashi02 said:
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake
Click to expand...
Click to collapse
So You must install a offical firmware again if storage doesn't show in blue screen.
aashi02 said:
can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.
Click to expand...
Click to collapse
I also had the same issue like you did.
I re-wrote everything into a FAQ. IF there's a problem anywhere, just reply in your thread. If its solved then the walkthrough is useful. If it doesn't get solved we'll just add your issue into the list and troubleshoot until it works.
http://forum.xda-developers.com/showthread.php?t=2277655
forumber2 said:
So You must install a offical firmware again if storage doesn't show in blue screen.
Click to expand...
Click to collapse
so what steps should i follow now??
aashi02 said:
so what steps should i follow now??
Click to expand...
Click to collapse
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.
I make diferent way, I download a backup of all files of pinkscreen and put it the pinkscreen and downlod the recovery after that the phone start work normaly,
I hope that will help
Sorry my bad eng
badiyee said:
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.
Click to expand...
Click to collapse
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.
aashi02 said:
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.
Click to expand...
Click to collapse
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.
badiyee said:
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.
Click to expand...
Click to collapse
hey thanks soooooo much. U are simply awesome. My phone is working now. U are great dude. I just did factory reset in recovery and it started. thanks alot.
most welcome. Have fun.
badiyee said:
most welcome. Have fun.
Click to expand...
Click to collapse
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please
aashi02 said:
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please
Click to expand...
Click to collapse
Can you boot on recovery?
xtugap said:
Can you still boot on recovery?
Click to expand...
Click to collapse
yea i can.but its the default recovery of huawei.
aashi02 said:
yea i can.but its the default recovery of huawei.
Click to expand...
Click to collapse
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?
xtugap said:
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?
Click to expand...
Click to collapse
i had cwm before but once i formatted boot and did the steps said by baidiyee it got replaced by default huawei recovery.....and ya my phone is not detected by my pc in that pink screen.
Right, stay calm, this is easy to fix. Im not in pc so you need to do all work. Turn your phone in punkscreen mod after right click on my computer and click in tje second option (i dont remember the name :-s manage I think). On that window click on manage devience. Now on the line apears outher deviences look for android devience or huawei, right click and click update driver (on the first option)
I think after that you are ready to install the new recovery
I will fo rest for now I will wait a few mins for your reply and I will go sleep I'm tired with you don't fix your problem I promise you, tomorow I will help you

Change firmware from A to G - meizu pro 5

Hello,
I tried many guides on web for changing the firmware from 5.1.2.0A to 5.1.2.0G without any luck.
The phone goes in bootloop and the only way to restore it is to flash again the original 5.1.2.0A firmware.
Could someone please suggest me a good guide or give me a good hint?
Thanks much!
rizxda said:
Hello,
I tried many guides on web for changing the firmware from 5.1.2.0A to 5.1.2.0G without any luck.
The phone goes in bootloop and the only way to restore it is to flash again the original 5.1.2.0A firmware.
Could someone please suggest me a good guide or give me a good hint?
Thanks much!
Click to expand...
Click to collapse
1. turn off device
2.Press VOLUME UP+POwer key, (press Power until you see logo, VOLume UP until you go in Recovery)
3. Connect phone to computer,the computer determined removable disk Recovery, empty volume of 998 MB
4. Copy the firmware in the drive and disconnect the phone
5. DON'T Reboot!! JUST select the firmware update. You can do it without wipe data. Click Start (retry, many may be different)
6. After flashing the phone is turned on again. If root was included - will again include.
hello..
is that work on meizu pro 5?
Converting the phone from A to G isn't as simple as the classical firmware upgrade. The version is checked and flash is denied if not the same (A =>A only)
Look at this tutorial and use method 2 or 3 : https://meizufans.eu/forum/topic/25...ional-firmware-on-your-chinese-mainland-meizu
It's fine for A=>G or A=>I
Didn't worked for me
I'm the owner of a meizu pro 5 runing Flyme 5.1.2.0A and none of these two methods worked for me. When I run the terminal commands both on phone or computer, it seems to do something, but when I reboot the phone always go to bootloop, and the only way to use it again is flashing the A version of the frimware again via recovery.
BernatVM said:
I'm the owner of a meizu pro 5 runing Flyme 5.1.2.0A and none of these two methods worked for me. When I run the terminal commands both on phone or computer, it seems to do something, but when I reboot the phone always go to bootloop, and the only way to use it again is flashing the A version of the frimware again via recovery.
Click to expand...
Click to collapse
Assuming you applied the correct commandline, you have to wait several minute (about 10) to the dd=xxxxx process end. Prompt should appears when OK.
naboleo said:
Assuming you applied the correct commandline, you have to wait several minute (about 10) to the dd=xxxxx process end. Prompt should appears when OK.
Click to expand...
Click to collapse
Yes, I know. The command line says the process has finished, then the phone is inresponsibe (As it has to, following the explanation on the meizufans web tutorial). Is only then when I reboot my phone and enter to bootloop.
BernatVM said:
Yes, I know. The command line says the process has finished, then the phone is inresponsibe (As it has to, following the explanation on the meizufans web tutorial). Is only then when I reboot my phone and enter to bootloop.
Click to expand...
Click to collapse
After flash, you can try to reboot in recovery (volup+power), clear data and then reboot normaly. First restart is a bit longer but you knows it already.
PS: did it a week ago with lastest G, without trouble
Thank you for your help. I would try it!
le9ion said:
1. turn off device
2.Press VOLUME UP+POwer key, (press Power until you see logo, VOLume UP until you go in Recovery)
3. Connect phone to computer,the computer determined removable disk Recovery, empty volume of 998 MB
4. Copy the firmware in the drive and disconnect the phone
5. DON'T Reboot!! JUST select the firmware update. You can do it without wipe data. Click Start (retry, many may be different)
6. After flashing the phone is turned on again. If root was included - will again include.
Click to expand...
Click to collapse
U r right!
I have just used this way to save my pro5 xD
Telefonu A dan G ye değiştirdim. Fakat Bootloader unlock yapamıyorum. Update.zip yüklenmiyor. Hiç birşey olmuyor :S

please please help

hi everyone i am new to this site and just want to say thanks for all the help in the pass with my mate 7. well i have a new problem i have a mate 8 with is bricked i think its totally bricked. so here we go on the back of the phone its say nxt-tl00 i have flashed it with the al10-137 rom and then updated with OTA to the latest rom. the problems then started when i rooted it and install twrp and then try to flash android 7 after that its stook in bootloop. this is what i tried so far. i used the knife tool and use the unbrick option everything seems to work but when you restart it just goes to the screen saying it cant be trusted and if i want to continue or so to recovery if i say continue it just restarts again but this time it will go to the e recovery which is another problem because it will see the wifi but wont let me pick any. i always tried the dload method with the same al10 137 rom extracted but it will give me n error after it gets to 5%. i am at my wits here and is about to bin the phone can anymore please help me
kbmnoel said:
hi everyone i am new to this site and just want to say thanks for all the help in the pass with my mate 7. well i have a new problem i have a mate 8 with is bricked i think its totally bricked. so here we go on the back of the phone its say nxt-tl00 i have flashed it with the al10-137 rom and then updated with OTA to the latest rom. the problems then started when i rooted it and install twrp and then try to flash android 7 after that its stook in bootloop. this is what i tried so far. i used the knife tool and use the unbrick option everything seems to work but when you restart it just goes to the screen saying it cant be trusted and if i want to continue or so to recovery if i say continue it just restarts again but this time it will go to the e recovery which is another problem because it will see the wifi but wont let me pick any. i always tried the dload method with the same al10 137 rom extracted but it will give me n error after it gets to 5%. i am at my wits here and is about to bin the phone can anymore please help me
Click to expand...
Click to collapse
Please anyone
Flash nougat recovery and try dload
bluheart said:
Flash nougat recovery and try dload
Click to expand...
Click to collapse
Dload nougat ??
Where is a noughat recovery , far as I know there is no twrp recovery for 7.0 .... What build prop name should we type in during the noughat install , I installed 552 via twrp and it does not display it correctly in settings about phone it says drm40xxxx or something. Please advise
well i have tried everything nothing work even huawei uk wont help so i guess i now have a brick.
kbmnoel said:
hi everyone i am new to this site and just want to say thanks for all the help in the pass with my mate 7. well i have a new problem i have a mate 8 with is bricked i think its totally bricked. so here we go on the back of the phone its say nxt-tl00 i have flashed it with the al10-137 rom and then updated with OTA to the latest rom. the problems then started when i rooted it and install twrp and then try to flash android 7 after that its stook in bootloop. this is what i tried so far. i used the knife tool and use the unbrick option everything seems to work but when you restart it just goes to the screen saying it cant be trusted and if i want to continue or so to recovery if i say continue it just restarts again but this time it will go to the e recovery which is another problem because it will see the wifi but wont let me pick any. i always tried the dload method with the same al10 137 rom extracted but it will give me n error after it gets to 5%. i am at my wits here and is about to bin the phone can anymore please help me
Click to expand...
Click to collapse
Have you tried factory reset?
apat26 said:
Have you tried factory reset?
Click to expand...
Click to collapse
yes three button method i use the knifetool i try twrp and tired erecovery but cant even select the wifi network nothing works so stressed
kbmnoel said:
yes three button method i use the knifetool i try twrp and tired erecovery but cant even select the wifi network nothing works so stressed
Click to expand...
Click to collapse
Not 3 button method.
Shut down, press power and vol+ button and soon as you see Huawei logo, release power button but keep pressing vol+ button until you enter recovery. Do factory reset.
apat26 said:
Not 3 button method.
Shut down, press power and vol+ button and soon as you see Huawei logo, release power button but keep pressing vol+ button until you enter recovery. Do factory reset.
Click to expand...
Click to collapse
dont work mate everytime it gives an error
kbmnoel said:
dont work mate everytime it gives an error
Click to expand...
Click to collapse
Flash Nougat Stock recovery through fastboot and try dload rollback package and then again dload your previous ROM package..
apat26 said:
Flash Nougat Stock recovery through fastboot and try dload rollback package and then again dload your previous ROM package..
Click to expand...
Click to collapse
hi mate sorry for being dumb and im not the best at this but when you say Nougat Stock recovery is that from when i extract it from the update.app ??
kbmnoel said:
hi mate sorry for being dumb and im not the best at this but when you say Nougat Stock recovery is that from when i extract it from the update.app ??
Click to expand...
Click to collapse
Correct..
apat26 said:
Correct..
Click to expand...
Click to collapse
thank you mate will try now
kbmnoel said:
dont work mate everytime it gives an error
Click to expand...
Click to collapse
You can follow the instructions in this website
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399
You first need to dload the update.app from the roll back package. For me the one from Russia work (you can try all three to see if one work). If any of the three rollback update.app work then you can use dload again the update.app that works before you install nougat. After that the phone will be locked. You need to unlock it again if you want to install twrp. You should be able to recover the phone as long as you can use dload and enter into fastboot mode (keep pressing the power button until it turn off then press the volume down at the same time connect it to the PC. If you can shut it down from the recovery menu, it will give you more time to do this).
This happened to me before and I used this method to recover the phone. For me the rollback from Russia works and I can dload back to L09C432B320.
[email protected] said:
You can follow the instructions in this website
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399
You first need to dload the update.app from the roll back package. For me the one from Russia work (you can try all three to see if one work). If any of the three rollback update.app work then you can use dload again the update.app that works before you install nougat. After that the phone will be locked. You need to unlock it again if you want to install twrp. You should be able to recover the phone as long as you can use dload and enter into fastboot mode (keep pressing the power button until it turn off then press the volume down at the same time connect it to the PC. If you can shut it down from the recovery menu, it will give you more time to do this).
This happened to me before and I used this method to recover the phone. For me the rollback from Russia works and I can dload back to L09C432B320.
Click to expand...
Click to collapse
will try now thank you mate
well so nothing is working keeps saying wrong software version man this is killing me

[Guide] Fix for boot-loop and bricked Honor 8 (probably others too)

The reason I'm making this thread is because I was trying to root my Honor 8 and things just didn't work out in TWRP. Rebooted my phone and I realized I had bricked it since it would not boot after 10 minutes. Solutions seem to be scattered throughout different threads so here's guide for when you're stuck in a boot loop or you bricked your Honor 8.
What you'll need:
1. The firmware currently you are on. @Coolyou posted a guide for a firmware finder. Here is the post.
2. SD Card
What to do:
Step 1.
Download the correct firmware. It will be a .zip file.
Step 2.
Create a folder called dload in the root of your SD card, not your internal storage. Copy the .zip file the folder and unzip it or unzip it else where and copy the content into the dload folder
Step 3.
Power off Honor 8 (if possible, sometimes it'll auto boot up when forced shutdown)
Step 4.
Make sure your device is not plugged into a computer as it will load into something else.
Hold Vol+ & Vol- & Power. It will being to install the firmware from the dload folder if done correctly. If it instantly fails that means you downloaded the incorrect firmware the device is already one.
You're done! However, if your device does not go past the startup logo within 3 minutes proceed to step 5.
Step 5 is probably necessary as everytime I've bricked my device, I've had to do the next step.
Step 5.
Power off. Hold power and Vol+. Once in Recovery mode (not eRecovery), clear cache and format your device. Once done, reboot.
Ta-da, you're device is now back to normal.
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Let go off the power button after the first vibration. Also make sure your phone is not plugged to a pc. With pc connected it boots into eRecovery instead of recovery. Good luck!
Edit:Also the guide does not make it 100% specific but the dload folder on the sd card needs to have the update.app file right inside it. If the structure is sd\dload\folder\update.app it also won't work.
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
i have same problem, you can fix this? help me please
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
thekubiaks said:
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
Click to expand...
Click to collapse
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Hi, my device is still not booting up after installing the matching dload firmware on my device from the honor 8 website (FRD-L09).
Is there still anything I can do to maybe get this fixed?
I created a nandroid backup of all partitions that I were able to back up, but even rolling back all partitions did not make it boot again.
Sadly, I am not able to get the device into e.g. fastboot mode anymore because it is not booting anymore and therefore cant get an adb shell on it.
I can still enter recovery mode, but when trying to boot it just stays at the blue screen with the white "honor" text after the short boot animation with the 3d text
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Lorog said:
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Click to expand...
Click to collapse
Same here on a Note 8 did you find a solution?
thekubiaks said:
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Click to expand...
Click to collapse
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
nickp22127 said:
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
Click to expand...
Click to collapse
Its erecovery
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...can u tell how did u managed to solve it???
oops, wrong thread
abbassbhai said:
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
i have the same pblm...can u tell how did u managed to solve it???
Click to expand...
Click to collapse
Do you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Did you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi, I have the exact same problem. Have you managed to fix it?
Same problems as other people above, couldn't load any recovery. Anyone can help us out?
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi even I have the same problem with Honor 8 Pro.. Did you get any solution??
Hi even I have the same problem with Honor 8 Did you get any solution??

I need the assistance of XDA wizards on recovering a poor students p9 lite

I'm in dire need of immediate assistance. I had previosly rooted my phone with this guide https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701 and unlocked the bootloader. Long story short I made the decision to unroot and lock the booloader. Now im faced with a bootloop and this error message: https://imgur.com/a/ksz1kYY
I can't afford to lose this phone. If someone can help me recover this phone I can even throw in an extra 20$. The phone isn't recognised by pc and thus I cant run adb commands.
Sadly due to huawei becoming the new apple, you can't do anything to restore it, unless you pay for a new motherboard.
If you are lucky enough, drain the battery until the phone no longer boots then charge it. You will have a very small chance for the device to boot and from there unlock the bootloader. If it can't boot up, then try it many times until it no longer boots in error mode.
The error means that the recovery mode cannot check if the device is valid or not, thus locking the device from unwanted access. I hope you get it fixed
MapBreak said:
I'm in dire need of immediate assistance. I had previosly rooted my phone with this guide https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701 and unlocked the bootloader. Long story short I made the decision to unroot and lock the booloader. Now im faced with a bootloop and this error message: https://imgur.com/a/ksz1kYY
I can't afford to lose this phone. If someone can help me recover this phone I can even throw in an extra 20$. The phone isn't recognised by pc and thus I cant run adb commands.
Click to expand...
Click to collapse
Hello, already tried to boot directly in fastboot mode ?
If not, turn off the device then connect it to cpu.
Press and hold vol - and power button until it boot.
Once booted ( hope so ) open adb/fastboot command and see if works now... :fingers-crossed:
Dadditz said:
Hello, already tried to boot directly in fastboot mode ?
If not, turn off the device then connect it to cpu.
Press and hold vol - and power button until it boot.
Once booted ( hope so ) open adb/fastboot command and see if works now... :fingers-crossed:
Click to expand...
Click to collapse
Would try this but the device doesn't exactly turn off. Holding down the power button just shuts it down for a second and then it boots automatically back. And can you explain what you mean by connecting it to cpu?
MapBreak said:
Would try this but the device doesn't exactly turn off. Holding down the power button just shuts it down for a second and then it boots automatically back. And can you explain what you mean by connecting it to cpu?
Click to expand...
Click to collapse
Ooops...
Yes, i was meaning connect it to your computer.. .
Connect it and try doing the way i told you.
If doesn't work let it completely discharges, then reconnect it to the computer and try again.
Wish you the best
Have you tried my method?
The Restless Soul said:
Have you tried my method?
Click to expand...
Click to collapse
I took my phone to a repair shop and I just got it back from there. They said that the phone just turned on like regular, and it appeared to be working so they didn't charge me for a repair. I rebooted to check if they actually had done anything but the error came up once more. I guess the battery had run out and it turned on when they charged it? If I run out the battery again and charge it will it turn on again? If so, what should I do once I'm able to boot? I still can't access the recovery from there to try anything.
EDIT: I'm waiting for the phone to run out of battery again
MapBreak said:
I took my phone to a repair shop and I just got it back from there. They said that the phone just turned on like regular, and it appeared to be working so they didn't charge me for a repair. I rebooted to check if they actually had done anything but the error came up once more. I guess the battery had run out and it turned on when they charged it? If I run out the battery again and charge it will it turn on again? If so, what should I do once I'm able to boot? I still can't access the recovery from there to try anything.
EDIT: I'm waiting for the phone to run out of battery again
Click to expand...
Click to collapse
Let it run out of battery and try to boot it into the rom. From there try to use firmware finder to reinstall your rom.
The Restless Soul said:
Let it run out of battery and try to boot it into the rom. From there try to use firmware finder to reinstall your rom.
Click to expand...
Click to collapse
I've tried several times now to let it run out of battery and try to boot it into fastboot, but every time I'm unsuccessful and it boots up regularly. I've tried holding power + vol- and power + vol- + vol+ and every combination of those. Not sure how to proceed since running adb command -adb reboot bootloader but that just ends up getting me to the same error screen. I don't know what I can do. Is it possible to flash the stock recovery and rom without fastboot?
MapBreak said:
I've tried several times now to let it run out of battery and try to boot it into fastboot, but every time I'm unsuccessful and it boots up regularly. I've tried holding power + vol- and power + vol- + vol+ and every combination of those. Not sure how to proceed since running adb command -adb reboot bootloader but that just ends up getting me to the same error screen. I don't know what I can do. Is it possible to flash the stock recovery and rom without fastboot?
Click to expand...
Click to collapse
Do not use adb or anything else.
Use firmware finder from Google play. Huawei has it's own eRecovery which is used for updates (OTA), so you shouldn't worry.
If you want to flash stock recovery, simply extract the update file and get the recovery.img, then flash it. It's a long method and hard to explain. Google it. Success
The Restless Soul said:
Do not use adb or anything else.
Use firmware finder from Google play. Huawei has it's own eRecovery which is used for updates (OTA), so you shouldn't worry.
If you want to flash stock recovery, simply extract the update file and get the recovery.img, then flash it. It's a long method and hard to explain. Google it. Success
Click to expand...
Click to collapse
Yeah but the thing is I can't flash anything without getting into fastboot.
MapBreak said:
Yeah but the thing is I can't flash anything without getting into fastboot.
Click to expand...
Click to collapse
Then use Firmware finder method.
The Restless Soul said:
Then use Firmware finder method.
Click to expand...
Click to collapse
How do I use firmware finder? I can download a update.app and something but those need to be flashed via fastboot right?
EDIT: Just tried to use firmware finder and update via proxy. I'm not able to get an update to show up despite multiple tries. Feels like I'm running out of options here.
MapBreak said:
How do I use firmware finder? I can download a update.app and something but those need to be flashed via fastboot right?
EDIT: Just tried to use firmware finder and update via proxy. I'm not able to get an update to show up despite multiple tries. Feels like I'm running out of options here.
Click to expand...
Click to collapse
Download the update file using firmware finder, put the update into your sd card (update.app), dial *#*#2846579*#*#, press update then wait.
The Restless Soul said:
Download the update file using firmware finder, put the update into your sd card (update.app), dial *#*#2846579*#*#, press update then wait.
Click to expand...
Click to collapse
You mean *#*#2846579#*#* ? It brings up a selection but the one ending in *#*# dorsn't. Software upgrade option said that it didn't find an update file. The factory reset option tries to reboot and then the error shows up again.
I got software upgrade to recognize the file but when I tried to update it just reboots back into error mode.
It's hard for me to explain how to fix it. Idk why it doesn't work to you. Have you tried going to a service and ask them to fix it for you?
The Restless Soul said:
It's hard for me to explain how to fix it. Idk why it doesn't work to you. Have you tried going to a service and ask them to fix it for you?
Click to expand...
Click to collapse
Yeah I guess getting the mainboard replaced is the only thing I can do now. Should I go to a Huawei service center or a regular phone repair shop? Thanks for all your help.
MapBreak said:
Yeah I guess getting the mainboard replaced is the only thing I can do now. Should I go to a Huawei service center or a regular phone repair shop? Thanks for all your help.
Click to expand...
Click to collapse
If you have the warranty tell them you got a bad update and it will fix them for free (there were cases where you would get bad updates via OTA, so you are covered)
If not, then a third party store but you will have to pay cash

Categories

Resources