can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.
In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here
forumber2 said:
In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here
Click to expand...
Click to collapse
no....its not giving any response
aashi02 said:
no....its not giving any response
Click to expand...
Click to collapse
You must install a offical firmware if storage doesn't show in blue screen.
forumber2 said:
You must install a offical firmware if storage doesn't show in blue screen.
Click to expand...
Click to collapse
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake
aashi02 said:
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake
Click to expand...
Click to collapse
So You must install a offical firmware again if storage doesn't show in blue screen.
aashi02 said:
can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.
Click to expand...
Click to collapse
I also had the same issue like you did.
I re-wrote everything into a FAQ. IF there's a problem anywhere, just reply in your thread. If its solved then the walkthrough is useful. If it doesn't get solved we'll just add your issue into the list and troubleshoot until it works.
http://forum.xda-developers.com/showthread.php?t=2277655
forumber2 said:
So You must install a offical firmware again if storage doesn't show in blue screen.
Click to expand...
Click to collapse
so what steps should i follow now??
aashi02 said:
so what steps should i follow now??
Click to expand...
Click to collapse
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.
I make diferent way, I download a backup of all files of pinkscreen and put it the pinkscreen and downlod the recovery after that the phone start work normaly,
I hope that will help
Sorry my bad eng
badiyee said:
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.
Click to expand...
Click to collapse
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.
aashi02 said:
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.
Click to expand...
Click to collapse
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.
badiyee said:
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.
Click to expand...
Click to collapse
hey thanks soooooo much. U are simply awesome. My phone is working now. U are great dude. I just did factory reset in recovery and it started. thanks alot.
most welcome. Have fun.
badiyee said:
most welcome. Have fun.
Click to expand...
Click to collapse
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please
aashi02 said:
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please
Click to expand...
Click to collapse
Can you boot on recovery?
xtugap said:
Can you still boot on recovery?
Click to expand...
Click to collapse
yea i can.but its the default recovery of huawei.
aashi02 said:
yea i can.but its the default recovery of huawei.
Click to expand...
Click to collapse
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?
xtugap said:
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?
Click to expand...
Click to collapse
i had cwm before but once i formatted boot and did the steps said by baidiyee it got replaced by default huawei recovery.....and ya my phone is not detected by my pc in that pink screen.
Right, stay calm, this is easy to fix. Im not in pc so you need to do all work. Turn your phone in punkscreen mod after right click on my computer and click in tje second option (i dont remember the name :-s manage I think). On that window click on manage devience. Now on the line apears outher deviences look for android devience or huawei, right click and click update driver (on the first option)
I think after that you are ready to install the new recovery
I will fo rest for now I will wait a few mins for your reply and I will go sleep I'm tired with you don't fix your problem I promise you, tomorow I will help you
Related
I am so confused .
Im very new to messing around with phones... yes you can call me a super super NOOB
my phone was already rooted and was running a
miui rom (Elite.ROM.v9.7.FIXED.with.Galnet.by.TerraMino_2012-02-18)
(oxygen2.2.2-u8800-test-110914)
i wanted to change it and tried to update CWM coz it was running an older version something like 5.0.---
i installed the file b518 and when i restarted my phone the phone got stuck in a boot loop.....
I can not access CWM
my phone does not come on and is in a boot loop
the only thing i can access now is the pink screen which i can view the image folder
Before this i had made a copy of my whole SD card on the computer...
so if n e files are required i can access it.
I have the zip files that are listed above
PLEASE HELP ME .....[/I][/B]
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
hmm..try it:
go to in pinkscreen, connect phone to pc via usb and replace recovery to custom; boot in recovery (power+vol.up), wipe all (data/factory reset) and try to boot phone.. or install another rom in recovery
TheJoker0 said:
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
Click to expand...
Click to collapse
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
sudhodhan said:
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
Click to expand...
Click to collapse
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
some one please help me
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
forumber2 said:
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
Click to expand...
Click to collapse
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
sudhodhan said:
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
Click to expand...
Click to collapse
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
forumber2 said:
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
Click to expand...
Click to collapse
hey thanks a lot i i got it back to the stock version
feels awsome to have sorted this nonsense....
big headache gone..... i dont know if i wanna mess around and upgrade it again... lol
Any help PLEASE! How did you do it?
Hi everyone,
Firstly let me thank anyone reading this in advance! Secondly let me extra thank anyone who helps me in advance!
Sudhodhan. How did you fix your phone?
I rooted my phone. Then I copied a new boot.img file into './cus_backup/image' directory and now the phone wont boot. It just keeps rebooting. I've looked through this forum but cant seem to find an answer. People with similar problems but not exactly the same.
When I go into the pink screen I cannot see the recovery image folder when I pug the USB from phone to computer.
My phone has android 2.3.5.
I cannot access the clockwork recovery mode (by holding power + vol up) it doesn't work anymore or at all?
I have Ubuntu and Xp on my computer.
When I connect phone to computer (while in the pick screen) ubuntu recognises a huwei device attached but adb does not see it. previously adb would see the device.
However when I let the phone keep rebooting endlessly there are moments when adb sees the phone. I have even opened a shell in adb on the device for a little while. but when I did I could not see any hidden directories or the './cust_backup/image' directory. I tried to push the original boot.img file over but that did not work either!
I am stuck.
If I could see the image directory while phone was in the pink screen I could copy original boot.img.
Any suggestions!
Cheers
Hi Koffs,
First check if your phone is U8800 and not a variant like U8800-Pro (+), U8800-51 or U8800-H.
In the case you have a regular U8800 I would suggest you install a stock rom.
For now I recommend B518, find here the link:
http://www.mediafire.com/download/p...1_(Beta1.0)(Overseas_Normal)(Gingerbread).zip
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
just put back boot in pink screen
but I don't have a pink screen or anything, and pc don't detect it
Flash step 2 of the official rom you had before!!
pikachukaki said:
Flash step 2 of the official rom you had before!!
Click to expand...
Click to collapse
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)
Sahsinho said:
I can't find the original rom (froyo 2.2) and what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone, pull of the battery, insert it again and press volume up, volume down and power button at the same time until you see a pink screen on your phone. Connect it to pc.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded before.
Unplug usb, pull off the battery, insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2
TUPAC_RIP said:
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone connect it to pc and press volume up, volume down and power button at the same time until you see a pink screen on your phone.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded defore.
Unplug usb, pull off the battery and insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/
Sahsinho said:
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/
Click to expand...
Click to collapse
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2
TUPAC_RIP said:
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
I mean that the phone don't startup, it can't find anything to boot with
Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
Sahsinho said:
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium
gkalenis said:
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Once it happend to me. If it is not booting and there is no huawei logo, you have to change the motherboard. If there is Huawei logo you are luckey enough, do the update without battery. A bad flash vanish my huawei logo. I approch the serivec center, and the motherboard has been replaced. So check once if there is huawei logo on screen and do the same update with dload folder without attery
Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Ok, that's good explanation.
You brick your phone.
As you cannot see huawei's flower or anything then you brick it.
Go to service , you don't have any other option right now.
And please after you get back your phone, DO NOT DO ANYTHING, before ask first.
You follow a completely wrong procedure, so when you get your phone back from service, everyone in this forum can help you on anything you want to do, but now you cannot do anything, sorry ...
Sent from my U8800Pro using xda premium
what about a Jtag or pinout or something like that ??? do you have an idea ???
Sahsinho said:
what about a Jtag or pinout or something like that ??? do you have an idea ???
Click to expand...
Click to collapse
I'm sorry, you don't have other solution, except service.
Sent from my U8800Pro using xda premium
Jtag officially supports our phone though..if u have knowledge you can do it but if u dont..u will destroy it more
-Rik[Rittik]
Alternative: check if can be recognize it via USB in Linux environment.(Linux doesn't need any appropriate drivers)
Sent from my U8800pro using xda app-developers app
i install weta rom but it stays on lg logo after successful installation
white647 said:
i install weta rom but it stays on lg logo after successful installation
Click to expand...
Click to collapse
Just remove the battery, put it back again and go into recovery mode (twrp). And do a clean flash again. If it doesnt work, then just flash another rom. Put the rom inside the sd card and flash it via twrp
jinkerz9430 said:
Just remove the battery, put it back again and go into recovery mode (twrp). And do a clean flash again. If it doesnt work, then just flash another rom. Put the rom inside the sd card and flash it via twrp
Click to expand...
Click to collapse
i cant enter in twrp:crying:
What u mean no TWRP or you can't get to it..Does the white screens come up were u have to select yes for reset twice and then it goes in twrp
Sent from my XT1635-01 using Tapatalk
white647 said:
i cant enter in twrp:crying:
Click to expand...
Click to collapse
When you put the battery back., do you press and hold down volume down and power button and then whe I the logo appears you rapidly release and press and hold the power button without removing the finger from the volume down?
Its all about timing to be honest. Took me about 10 tries before I noticed I was being stupid. Right before the corrupted screen shows up, there is a very small window that you have to do this at. What I do is this.
I hold the volume down button while it is fully powered off.
The I press the power button and as soon as I see the LG Logo (It pops up for a split second before the corrupt screen) I let go of the power button and then press it imminently after I let go of it and TWRP shows up in a few seconds.
Again, its all about timing.
Biff627 said:
Its all about timing to be honest. Took me about 10 tries before I noticed I was being stupid. Right before the corrupted screen shows up, there is a very small window that you have to do this at. What I do is this.
I hold the volume down button while it is fully powered off.
The I press the power button and as soon as I see the LG Logo (It pops up for a split second before the corrupt screen) I let go of the power button and then press it imminently after I let go of it and TWRP shows up in a few seconds.
Again, its all about timing.
Click to expand...
Click to collapse
when I do that appear a white screen and it says factory data reset nothing more
white647 said:
when I do that appear a white screen and it says factory data reset nothing more
Click to expand...
Click to collapse
Since you have TWRP, just hit yes to both. It wont wipe anything. I paniced as well but had backups so I clicked yes. and it booted TWRP
kenbrownstone said:
What u mean no TWRP or you can't get to it..Does the white screens come up were u have to select yes for reset twice and then it goes in twrp
Sent from my XT1635-01 using Tapatalk
Click to expand...
Click to collapse
I cant get to it the white screen come up and says factory reset I have to select yes twice it opens twrp to do the script but it restart automatically
white647 said:
I cant get to it the white screen come up and says factory reset I have to select yes twice it opens twrp to do the script but it restart automatically
Click to expand...
Click to collapse
Can you boot the phone at all?
Biff627 said:
Since you have TWRP, just hit yes to both. It wont wipe anything. I paniced as well but had backups so I clicked yes. and it booted TWRP
Click to expand...
Click to collapse
it just go back to the lg logo
white647 said:
it just go back to the lg logo
Click to expand...
Click to collapse
Did you install the H918 Rom or the US996 Rom?? If you didnt flash the TMO rom then you might be SOL. And it seems that whatever happened crashed TWRP as well... Are you able to get adb to detect the device?
Biff627 said:
Did you install the H918 Rom or the US996 Rom?? If you didnt flash the TMO rom then you might be SOL. And it seems that whatever happened crashed TWRP as well... Are you able to get adb to detect the device?
Click to expand...
Click to collapse
first thanks for the help. i rooted with dirty cow. I install weta rom for h918 tmobile when it says success it reboot but stays in lg logo. how i can connect it to adb cuz it is in lg logo in adb cmd it says no device detected. did you know how to detect it
I'm new in forums this have a chat? to respond you faster @Biff627
white647 said:
I'm new in forums this have a chat? to respond you faster @Biff627
Click to expand...
Click to collapse
To be honest, im the least qualified to try to help! It just stays at the lg logo the entire time? No static screen or anything? And TWRP crashes no matter what? If you can get it into download mode you could try to restore jt using a KDZ for your model?
https://drive.google.com/drive/mobile/folders/0B6Wj13Rw1kw-QTViRFJRaVRHQnM?usp=drive_web
You could try LGUP to see if you can restore it. Just make sure its the right model..
Biff627 said:
To be honest, im the least qualified to try to help! It just stays at the lg logo the entire time? No static screen or anything? And TWRP crashes no matter what? If you can get it into download mode you could try to restore jt using a KDZ for your model?
https://drive.google.com/drive/mobile/folders/0B6Wj13Rw1kw-QTViRFJRaVRHQnM?usp=drive_web
You could try LGUP to see if you can restore it. Just make sure its the right model..
Click to expand...
Click to collapse
I'm gonna download I'm using my neighbor internet so it slow download :fingers-crossed: i wish i could contact you when it finish so i can get help using lgup
white647 said:
I cant get to it the white screen come up and says factory reset I have to select yes twice it opens twrp to do the script but it restart automatically
Click to expand...
Click to collapse
you could try to push TWRP into the system by using adb, just in case it has become corrupted. Then, if that is the issue then that should fix it.
---------- Post added at 11:56 PM ---------- Previous post was at 11:07 PM ----------
white647 said:
I'm gonna download I'm using my neighbor internet so it slow download :fingers-crossed: i wish i could contact you when it finish so i can get help using lgup
Click to expand...
Click to collapse
Try this to go into fastboot mode : http://www.hardreset.info/devices/lg/lg-v20/fastboot-mode/
pull battery out put back in. Hold volume down, plug in USB to get into fastboot
Biff627 said:
To be honest, im the least qualified to try to help! It just stays at the lg logo the entire time? No static screen or anything? And TWRP crashes no matter what? If you can get it into download mode you could try to restore jt using a KDZ for your model?
https://drive.google.com/drive/mobile/folders/0B6Wj13Rw1kw-QTViRFJRaVRHQnM?usp=drive_web
You could try LGUP to see if you can restore it. Just make sure its the right model..
Click to expand...
Click to collapse
I just fix my phone with that back up thanks alot did you know which custom rom work good
white647 said:
I just fix my phone with that back up thanks alot did you know which custom rom work good
Click to expand...
Click to collapse
Weta is amazing, just use the one for your phone! Or it wont function. If you have the tmobile model then only use the tmobile rom xD Just make a backup in TWRP before flashing so you dont have to start completely over.
hello
after a low battery emergency, my Max2 doesnt start completely anymore i can see beginning of startup but doesnt complete
and restart constantly till batterie down.
i can access on both recovery menu (Sound+ or Sound-) but i can't do anything from them
any help appreciated
thanks so much
F94
help please
help needed please !!!
thanks
F94
Try formatting data
You can try clean install of the ROM you preffer
how to ?
thanks for your reply
how can do that ?
frenchy94 said:
thanks for your reply
how can do that ?
Click to expand...
Click to collapse
Note: This will format (reset) your phone and you will loose all of your data
Go to TWRP Power and Vol+ button
then click on wipe
then click format data
Now type yes
Screen shot below
frenchy94 said:
hello
after a low battery emergency, my Max2 doesnt start completely anymore i can see beginning of startup but doesnt complete
and restart constantly till batterie down.
i can access on both recovery menu (Sound+ or Sound-) but i can't do anything from them
any help appreciated
thanks so much
F94
Click to expand...
Click to collapse
Hope you have recovered your phone....if not tell about:
1. What ROM were you on when such thing started happening - Stock or any custom ROM?
2. If on stock what recovery do you have - stock or TWRP?
3. If custom ROM which one? Did you try to install ROS 4 without suggested GApps? ROS 4 loops without GApps install as of now.
4. Do you have access to a PC?
You can also try via Telegram channel for "Le Max 2 Development" for quick help.
still dead...
still stuck
i can' access on both menu (pressing either + or -)
but stuck after , i assume stock ROM
i have an PC on my hands
thanks for your helo
frenchy94 said:
still stuck
i can' access on both menu (pressing either + or -)
but stuck after , i assume stock ROM
i have an PC on my hands
thanks for your helo
Click to expand...
Click to collapse
Sorry to hear that. Boot to recovery, copy all your data to PC. It would help if you can post a screenshot of recovery.
Recovery with vol up and power buttons.
Edit: Once done with backup post the recovery screen here. Someone will help resolve or attempt to resolve from here.
hi
thanks for your reply attached screenshot of recovery, i do no know how to access phone from my PC connecting to USB
phone are not see on my laptop
help appreciated
frenchy94 said:
... attached screenshot of recovery, i do no know how to access phone from my PC connecting to USB ...
Click to expand...
Click to collapse
The phone has stock recovery. Let us check a few things but let us not clutter here. I assume you know how to go about with private messages.
If you do not know how to, see the attached image - XDA accessed from my PC. You can read private messages and reply from there as well. First off we should sync our time. See your inbox.
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
sammiev said:
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
Click to expand...
Click to collapse
Thanks solved
sarthak.whenever said:
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Click to expand...
Click to collapse
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
haiise said:
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
Click to expand...
Click to collapse
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
sarthak.whenever said:
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
Click to expand...
Click to collapse
Ohh glad to hear that you fixed your phone
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
sh_amuel said:
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
Click to expand...
Click to collapse
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
sarthak.whenever said:
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
Click to expand...
Click to collapse
I do know how to enter in download mode, but even when I upload the TWRP again and start over the process it get into the same black screen. I was wondering if Samsung Knox is blocking this action.
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
MrMusti53 said:
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
Click to expand...
Click to collapse
try to flash original software
haiise said:
try to flash original software
Click to expand...
Click to collapse
Any program can't see the device and the pc only saw it for a second
MrMusti53 said:
Any program can't see the device and the pc only saw it for a second
Click to expand...
Click to collapse
can you go to download mode ?
haiise said:
can you go to download mode ?
Click to expand...
Click to collapse
No, phone's no reaction
MrMusti53 said:
No, phone's no reaction
Click to expand...
Click to collapse
konudan bağımsız türk müsün la
Translated by GT: independent of the subject are you turkish
sarthak.whenever said:
Thanks solved
Click to expand...
Click to collapse
it didnt work for me , is there any other combo