Database Users

[Q] Huawei E5372s-32 stuck on boot after wrong firmware

Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks

That Simply means there is an error on the phone software, Update it and it'l be 5n

Unfortunately XDA is not the right place to talk about MiFi Routers. So although there are millions of members here, very few will find your post, and very few of those who do will be able to help you. So you will probably have much better success in places like the GSM-Forums website.

thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi

Please alaa i have same a problem with huawei E5372 , but when i update nothing comining only huawei logo freeze
الله يا خليك يا عم علاء عندي نفس المكلة و كل لما اعملها مش بترضى و الججهاز بيعلق ممكن حل

alaa2003 said:
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
Click to expand...
Click to collapse
I know I may be a little too late but I found the solution to this. I was stuck on the FTM screen but THIS firmware solved it. It is really easy. Try it out and tell me how it goes. All the best.

Dear i have the same problem. with my sts huawei router. Could you please tell us the whole procedure how you did it? like from the start how to install driver how to flash with full links how to move my device into download mode to detect it with computer and make installation which tools needed. Thnx in Advance.

have you solved the problem ??

Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable R215MobileWifiFirmware_v3.1.hmf.
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work

searching R215MobileWifiFirmware_v3.1.hmf
Hgall8 said:
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable .
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
Click to expand...
Click to collapse
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*

jose_amaral97 said:
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
Click to expand...
Click to collapse
Not sure if I'm allowed to post links here, I'll send you the link in pm

E5372T -,Stucked on boot logo firmware version 21.290.03.00.838
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help

Sir I have huawei e3272s-927 airtel modem when I upgrade software with wizard after the device not found and modem symbol is in device manager appear and disappear what the solution pls help me

dr_edmund said:
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Click to expand...
Click to collapse
use boot short pin method its helped
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
alaa2003 said:
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Click to expand...
Click to collapse
first press menu then power dont release until show arrow image
connect mifi to pc
install huawei driver
check your port device use huawei flasher or you can install firmware with exe extension

[Q] [Help] Bricked UMI ZERO

Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.

Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app

I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead

Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers

reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected

Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?

Meizu m2 note bricked.

I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.

Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me

Can you speak more clearly?I don't understand.Because my English is not very good.

zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?

Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?

Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse

I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)

Lenovo Vibe K4 Note Can't Flash File Sp Flash Tool

Hi I'm new for this forum II have a lenovo vibe k4 note that will be bricked during upgrade session...I'm already used RR version 5.8.5. when I tried to next update my phone stuck up at and not finish to flash but I'm waiting to long,then my phone has reach a battery low and will it be turn off.I'm try to open but stuck at logo LENOVO.to solved I'm flash a firmware s232 using sp flash tool but I'm worst I have no luck when my phone connect to USB its automatically open up and vibrate when I pressed DOWNLOAD button in sp flash tool.Please help me how to re flash or downgrage my phone when its come like this
PS. Sorry my bad english

Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)

chuate92 said:
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
Click to expand...
Click to collapse
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work

jblonz said:
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
Click to expand...
Click to collapse
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".

Replace Cable for Mobile not Other Cable
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
Maybe cable didn't work caused cable be used is for jbl.

First install Mediatek USB Drivers and then click on download button and after that connect your phone. And that should help you.

Assuming that your pc has already been installed with mediatek usb drivers,you have to click download first and then connect usb to mobile(must be in shutdown mode) by holding both volume buttons,then after at max 2 min downloading will be done. This process has worked fine with me...hope it helps...

chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
I had choose with battery option , latest lenovo usb driver installed then after pressing download and then connecting my phone it does Nothing it shows logo and starts charging in power off mode please do something???????
Waiting for your reply

Did u get it to work

How about now ? Have you found a solution to your problem? I also need the same solution because I can't flash with the error that always appears s_ft_enable_dram_failed.

Bricked my A1 - help !!!!

I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!

You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:

bpodnar said:
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
Click to expand...
Click to collapse
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur

mokahabashy said:
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
Click to expand...
Click to collapse
Did you use usb 2.0 or 3.0? 3.0 is not good for this

bpodnar said:
Did you use usb 2.0 or 3.0? 3.0 is not good for this
Click to expand...
Click to collapse
i used usb 2
man my phone is fully dead boot
can not enter EDL mod or qualcom download mod
i tried make deep flash cable , it did not work
when i connect any usb to my mobile , even the charger i got my device vibrated every 2 second
i have to force it to EDL mod without using any cable
i have a question : i rooted the phone , so when i send it to warranty center would they know that i rooted my phone ?
what should i tell them ?

I think the service cannot detect that your phone is rooted because they cant turn it on. If they flash it from scratch the root will be gone.

Bro your phone opening case and Google search testpoint
---------- Post added at 01:34 AM ---------- Previous post was at 01:33 AM ----------
---------- Post added at 01:35 AM ---------- Previous post was at 01:34 AM ----------
My devices is not flashing and not edl cable test point is working only miphone 64 download and flashing 7.8.23 rom and devices is back bro

mokahabashy said:
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
Click to expand...
Click to collapse
Same happened with me....

Shubham2509 said:
Same happened with me....
Click to expand...
Click to collapse
Same did you get any solution?

Haseeb Ahmed Khan said:
Same did you get any solution?
Click to expand...
Click to collapse
I gave my phone to service center

Shubham2509 said:
I gave my phone to service center
Click to expand...
Click to collapse
did they fix it? or gave you a new one?

Haseeb Ahmed Khan said:
did they fix it? or gave you a new one?
Click to expand...
Click to collapse
Fix

Shubham2509 said:
Fix
Click to expand...
Click to collapse
There is another way directly on Miforum app. Basically you need to open back housing and short 2 cantacs. More you can read at Miforum when you search for Unbrick MI A1

Nice story, important lesson, note to self:
"Google more" (so you don't have to pay the service center so they do it for you and charge you a lot of moneyz)