Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.
Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse
reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected
Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?
Related
Hi everyone,
I'm in a bit of a pickle so if anyone could help me out i'd really appreciate it! Yesterday I was trying to root my E400 but first had to change the firmware. I tried to change it using KDZ and got an error. When I tried it again my phone would only boot into 'Emergency Mode'. I've made sure that I have the right firmware file and am now not sure how to fix it.
I've tried disabling the modem in device manager and have also tried using the LG Mobile Support Tool, but when it reaches the software writing stage it pauses at 4% then comes up with an error saying 'Upgrade stopped due to an error'.
I don't know what to try next and hope I haven't permanently bricked it.
If anyone can help me out i'll owe you big time!
Thanks,
Jenny
:/
so
if, you try with kdz what happens?
how did u try to root ur phone?
i suggest yo to do as following:
1-remove battery ad re-enter it
2-unistall drivers or things reguarding the phone and then reinstall them
3-retry with kdz making sure you firstly disabled modem
Thanks for the quick reply! I didn't get to root my phone because first I needed to change the firmware. Now because my phone is stuck in Emergency Mode, I select Emergency in kdz and choose the original firmware, then it runs for a while and I eventually get an error message saying Wparam: 100 LParam : 1010, nothing seems to have changed and it's still stuck in emergency mode. Uninstalling and reinstalling the drivers doesn't seem to be helping and I've also disabled the modem to no avail.
Try something else
If I remember well you must choose DIAG mode in kdz tool, and in my opinion fabric rom V10m is best for unbricking.
At first connect phone to computer in emergency mode, launch device manager and check if there's a modem (LGEsomething), if it is = uninstall it. Then as I said earlier, run kdz as administrator, DIAG mode and flash with stock rom. I hope it will work
And sorry if there are mistakes in my english language
OTG prob.
PLS GIVE ME ANSWER.
1.Can LG L3 E400 support USB OTG? (can be at least one of the functions mouse, keyboard and USB storage)
2.Do I need to flash stock or custom firmware?
3.Does it require a kernel?
4.And how do I make it work?
5.Give me instructions how to fix it?
If it doesn't work give me a issue.
(Note: I don't have any knowlege of C code if u want me to edit it)
I allready have a OTG cable(should note that too)
Running CM9 (not nightly,fully stable accept OTG prob.) with SDMerge400 and with kernel Jeeiko (not sure if I'm right )
USB Host Diagnostics unique code: 371257
nik1234567 said:
PLS GIVE ME ANSWER.
1.Can LG L3 E400 support USB OTG? (can be at least one of the functions mouse, keyboard and USB storage)
2.Do I need to flash stock or custom firmware?
3.Does it require a kernel?
4.And how do I make it work?
5.Give me instructions how to fix it?
If it doesn't work give me a issue.
(Note: I don't have any knowlege of C code if u want me to edit it)
I allready have a OTG cable(should note that too)
Running CM9 (not nightly,fully stable accept OTG prob.) with SDMerge400 and with kernel Jeeiko (not sure if I'm right )
USB Host Diagnostics unique code: 371257
Click to expand...
Click to collapse
i dont think, maybe with cm11 @fergy will merge it
you have to select diag not emergency:good:
OK,
can u ask him how to do it.. THX 4 your reply.
---------- Post added at 06:23 PM ---------- Previous post was at 05:55 PM ----------
Mobocobo, the problem is that you didn't perform a hard reset.
Hard Reset is like a Factory Reset but more advanced. (so this must work 4 u)
Works for me.
So first u must flash stock via KDZ flasher (has more chances if u flash your own carrier)
Boot your phone into Emergancy Mode. Open KDZ flasher ,select phone mode: DIAG , and after its done.
Pull the battery out of your phone.Unplug your phone from PC.(wait 5 seconds)Return the battery.(And read this part before u do it)
Don't push power button (or else u want to do this again).Now hold Power +Volume UP and Down until it shows the LG boot logo. Quickly release the power button.After few seconds u will see a arrow pointing from the box to the android dummy(doll, toy or something).First boot will take about 5-30min(if longer u caused a bootloop so try again)
And u will see your android back to normal without root of course.
When I had this problem , tooked me about 5-6 full days to figure out how to unbrick XD.
Hit thanks if I helped u.(I want to be with the other devs.)
---------- Post added at 06:36 PM ---------- Previous post was at 06:23 PM ----------
Oh, yeah mobocobo its going to be the original 2.3.6 or 2.3.3 stock ROM
Sent from my LG-E400 using XDA Premium 4 mobile app
mobocobo said:
Thanks for the quick reply! I didn't get to root my phone because first I needed to change the firmware. Now because my phone is stuck in Emergency Mode, I select Emergency in kdz and choose the original firmware, then it runs for a while and I eventually get an error message saying Wparam: 100 LParam : 1010, nothing seems to have changed and it's still stuck in emergency mode. Uninstalling and reinstalling the drivers doesn't seem to be helping and I've also disabled the modem to no avail.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582881
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
That Simply means there is an error on the phone software, Update it and it'l be 5n
Unfortunately XDA is not the right place to talk about MiFi Routers. So although there are millions of members here, very few will find your post, and very few of those who do will be able to help you. So you will probably have much better success in places like the GSM-Forums website.
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Please alaa i have same a problem with huawei E5372 , but when i update nothing comining only huawei logo freeze
الله يا خليك يا عم علاء عندي نفس المكلة و كل لما اعملها مش بترضى و الججهاز بيعلق ممكن حل
alaa2003 said:
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
Click to expand...
Click to collapse
I know I may be a little too late but I found the solution to this. I was stuck on the FTM screen but THIS firmware solved it. It is really easy. Try it out and tell me how it goes. All the best.
Dear i have the same problem. with my sts huawei router. Could you please tell us the whole procedure how you did it? like from the start how to install driver how to flash with full links how to move my device into download mode to detect it with computer and make installation which tools needed. Thnx in Advance.
have you solved the problem ??
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable R215MobileWifiFirmware_v3.1.hmf.
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
searching R215MobileWifiFirmware_v3.1.hmf
Hgall8 said:
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable .
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
Click to expand...
Click to collapse
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
jose_amaral97 said:
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
Click to expand...
Click to collapse
Not sure if I'm allowed to post links here, I'll send you the link in pm
E5372T -,Stucked on boot logo firmware version 21.290.03.00.838
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Sir I have huawei e3272s-927 airtel modem when I upgrade software with wizard after the device not found and modem symbol is in device manager appear and disappear what the solution pls help me
dr_edmund said:
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Click to expand...
Click to collapse
use boot short pin method its helped
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
alaa2003 said:
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Click to expand...
Click to collapse
first press menu then power dont release until show arrow image
connect mifi to pc
install huawei driver
check your port device use huawei flasher or you can install firmware with exe extension
THE LENOVO IDEATAB A3000-H 16GB ZIP FILE TO BE EASILY INSTALL ON RECOVERY MODE "UPDATE FROM SD CARD". WHICH IS I HAVE SEEN ON AZAM'S POST , WHICH IS "ONLY" "RAR" FILE NOT ZIP FILE , THEY MAKE PEOPLE HARDER TO INSTALL AND DO THE HARDEST WAY. WE NEED A STOCK ROM ZIP FILE TO FIX SOME PROBLEMS:
1.) CAN IT ALSO BE USE ON BOOT LOOP OF LENOVO A3000-H ?
2.)CAN WORK ON A CHANGED BUILD.PROP AND A CHANGED DEVICE MODEL OR DEVICE NAME ON BUILD.PROP?
3.)WHY PEOPLE ALWAYS PUT ON FLASH TOOLS WHERE YOU CAN . DOWNLOAD DIRECTLY , PUT ON SD CARD, AND RECOVERY MODE, THEN UPDATE FROM SD CARD , THEN INTSALL? IS THAT HARD?
[PS] I KNOW ITS NONSENSE BUT I NEED A ZIP FILE ON LENOVO A3000 STOCK ROM TO EASILY INSTALL IT AND I NEED IT BECAUSE MY LENOVO A3000 GOT BOOTLOOP AFTER CHANGING BUILD.PROP AND DEVICE MODEL NAME. MY LENOVO IDEATAB A3000-H 16GB HAVEN'T BEEN USDB DEBUGGING SO I CAN'T USE SP FLASH TOOLS , BUT THE ONLY WAY TO IT WAS TO CHANGE THE ROM LIKE A FRESH NEW SYSTEM. THANK YOU SOO MUCHH!!!!!! AND MAY GOD BLESS ON YOUR PROFFESION!!!! http://cdn3.xda-developers.com/images/smilies/frown.gif
BTW ITS BEEN A MONTH MY TABLET GOT THIS PROBLEM AND I'M CRYING EVERY DAY
Regicidez said:
THE LENOVO IDEATAB A3000-H 16GB ZIP FILE TO BE EASILY INSTALL ON RECOVERY MODE "UPDATE FROM SD CARD". WHICH IS I HAVE SEEN ON AZAM'S POST , WHICH IS "ONLY" "RAR" FILE NOT ZIP FILE , THEY MAKE PEOPLE HARDER TO INSTALL AND DO THE HARDEST WAY. WE NEED A STOCK ROM ZIP FILE TO FIX SOME PROBLEMS:
1.) CAN IT ALSO BE USE ON BOOT LOOP OF LENOVO A3000-H ?
2.)CAN WORK ON A CHANGED BUILD.PROP AND A CHANGED DEVICE MODEL OR DEVICE NAME ON BUILD.PROP?
3.)WHY PEOPLE ALWAYS PUT ON FLASH TOOLS WHERE YOU CAN . DOWNLOAD DIRECTLY , PUT ON SD CARD, AND RECOVERY MODE, THEN UPDATE FROM SD CARD , THEN INTSALL? IS THAT HARD?
[PS] I KNOW ITS NONSENSE BUT I NEED A ZIP FILE ON LENOVO A3000 STOCK ROM TO EASILY INSTALL IT AND I NEED IT BECAUSE MY LENOVO A3000 GOT BOOTLOOP AFTER CHANGING BUILD.PROP AND DEVICE MODEL NAME. MY LENOVO IDEATAB A3000-H 16GB HAVEN'T BEEN USDB DEBUGGING SO I CAN'T USE SP FLASH TOOLS , BUT THE ONLY WAY TO IT WAS TO CHANGE THE ROM LIKE A FRESH NEW SYSTEM. THANK YOU SOO MUCHH!!!!!! AND MAY GOD BLESS ON YOUR PROFFESION!!!! http://cdn3.xda-developers.com/images/smilies/frown.gif
BTW ITS BEEN A MONTH MY TABLET GOT THIS PROBLEM AND I'M CRYING EVERY DAY
Click to expand...
Click to collapse
You install rom with SP Flash Tool, extract Zip and load scatter file in, and make sure tick FAC, and give it right path. Then just click Firmware upgrade, wait till it finished, then unplug tablet then plug back in, and it should start flashing rom, make sure tablet is turned off to be in Preloader mode,
wigankev said:
you install rom with sp flash tool, extract zip and load scatter file in, and make sure tick fac, and give it right path. Then just click firmware upgrade, wait till it finished, then unplug tablet then plug back in, and it should start flashing rom, make sure tablet is turned off to be in preloader mode,
Click to expand...
Click to collapse
thank you for the information but i am asking if you have a direct zip file to just "install directly via recovery mode/ install zip from sd card then succesfly change the rom of the tablet" because its the easiest way "i" think to fix the bootloop that i change the device model in my lenovo a3000 build.prop then got into bootloop, that's why i need a direct zip file to install it directly and easily. Thank you
Regicidez said:
thank you for the information but i am asking if you have a direct zip file to just "install directly via recovery mode/ install zip from sd card then succesfly change the rom of the tablet" because its the easiest way "i" think to fix the bootloop that i change the device model in my lenovo a3000 build.prop then got into bootloop, that's why i need a direct zip file to install it directly and easily. Thank you
Click to expand...
Click to collapse
Extract it and use Winrar to zip it?
wigankev said:
extract it and use winrar to zip it?
Click to expand...
Click to collapse
are asking me sir? Or is it really a solution?
Please i need help on my tab , i already go to some tablet specialist in the mall and they said the y have experience fixing lenovo kinds of tablet but they said its really hard to get the firmware . Please i need help online now!! please i need help much appreciated to these two :
Azam
oliver
Regicidez said:
are asking me sir? Or is it really a solution?
Please i need help on my tab , i already go to some tablet specialist in the mall and they said the y have experience fixing lenovo kinds of tablet but they said its really hard to get the firmware . Please i need help online now!! please i need help much appreciated to these two :
Azam
oliver
Click to expand...
Click to collapse
If you have a bricked tablet, just flash firmware from Azam thread. Just extract rar file and load scatter file from in target_bin folder in SP Flash tools, then tick FAC and make sure it is headed to the right path. Then just click Firmware upgrade, once it has finished validating the files, simply unplug the tablet and plug back in, and the bar at the bottom of SP flash tools will turn red, then it will start flashing new rom/firmware onto your tablet, Once completed it will come up with a green circle saying completed. Tablet must be turned off to access Preloader mode.
wigankev said:
If you have a bricked tablet, just flash firmware from Azam thread. Just extract rar file and load scatter file from in target_bin folder in SP Flash tools, then tick FAC and make sure it is headed to the right path. Then just click Firmware upgrade, once it has finished validating the files, simply unplug the tablet and plug back in, and the bar at the bottom of SP flash tools will turn red, then it will start flashing new rom/firmware onto your tablet, Once completed it will come up with a green circle saying completed. Tablet must be turned off to access Preloader mode.
Click to expand...
Click to collapse
yes I tried it AZAM'S technique but my laptop does not show up an MT65x that will show up in DEVICE MANAGER , it just show CDS SERIAL which I dont know how. ONE LAST THING ABOUT CONNECTING THE TABLET BEFORE DOWNLOAD IN SP FLASH TOOL? WHAT MODE IS THAT? RECOVERY MODE? BOOTLOADER MODE? THEN AFTER DOWNLOADING, PLUG THE DEVICE USING BOOTLOADER MODE RIGHT?
Regicidez said:
yes I tried it AZAM'S technique but my laptop does not show up an MT65x that will show up in DEVICE MANAGER , it just show CDS SERIAL which I dont know how. ONE LAST THING ABOUT CONNECTING THE TABLET BEFORE DOWNLOAD IN SP FLASH TOOL? WHAT MODE IS THAT? RECOVERY MODE? BOOTLOADER MODE? THEN AFTER DOWNLOADING, PLUG THE DEVICE USING BOOTLOADER MODE RIGHT?
Click to expand...
Click to collapse
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
wigankev said:
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
Click to expand...
Click to collapse
I ALREADY GOT THE DRIVERS WHAT I DONT KNOW IS THAT WHEN I PUT ON PRELOADER MODE , THEN CONNECT TO COMPUTER VIA USB CABLE , THEN GO TO DEVICE MANAGER TO UPDATE THE MT65Xx DRIVER USING THE EXTENDED DRIVER I DOWNLOADED , BUT I CAN'T SEE A MT65Xx it just shows CDS SERIAL AND ON ANDROID PHONE ON DEVICE MANAGER IT JUST SHOW >ANDROID PHONE> ANDROID ADB INTERFACE> THEN AT THE UKNOWN DEVICE IT JUST SHOW ( CDS SERIAL>UNKNOWN DEVICE> UNKOWN DEVICE) THEN WHERE IS MT65XX ??? WHAT DRIVER WILL I UPDATE???? :3
wigankev said:
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
Click to expand...
Click to collapse
OH BTW AFTER MT65Xx it I CAN NOT UPDATE DRIVER, it just stay there AFTER AWHILE , IT POPS AS ANDROID PHONE>ALCATEL ANDROID ADB INTERFACE ? WHAT THE HELL IS THIS , WHY CAN'T MY LAPTOP JUST FOLLOW OTHER PEOPLE WHEN THEY TRY TO FIX ??? >.< PLEASE HELP I NEED HELP AND THE ONLY UKNOWN DEVICE LEFT IS JUST CDS SERIAL AND WHAT THE HELL IS THIS??? PLEASE I REALLY NEED SOMEONE TO TOE ON TOE ABOUT THIS PROBLEM
Hi,
Follow these steps from this thread:
http://forum.xda-developers.com/showthread.php?t=2206421
You need to download the MTK drivers.
We have the same problem. I'm still fixing it though. I would say its difficult to solve this tablet problem.
Do the SP Flash tool and research too. It really helps.
Please how can I recover my Lenovo tab firmware through sd card?
please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!
Akshatpunj said:
please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!
Click to expand...
Click to collapse
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84
ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84
Click to expand...
Click to collapse
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!
Akshatpunj said:
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!
Click to expand...
Click to collapse
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?
This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Akshatpunj said:
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?
Click to expand...
Click to collapse
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG
ADDICTED777 said:
This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG
Click to expand...
Click to collapse
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!
Akshatpunj said:
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!
Click to expand...
Click to collapse
Yo there is a button for that ...u know I'm kind of GREEDY...
ADDICTED777 said:
Yo there is a button for that ...u know I'm kind of GREEDY...
Click to expand...
Click to collapse
Already done...
ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!
Sahaj Desai said:
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!
Click to expand...
Click to collapse
u need a video tutorial that shows how to install .inf file
here is the one:
https://www.youtube.com/watch?v=lJ7WTRW7psA
Now before u proceed make sure u have disabled the driver signature verification.
ADDICTED777 said:
u need a video tutorial that shows how to install .inf file
here is the one:
Now before u proceed make sure u have disabled the driver signature verification.
Click to expand...
Click to collapse
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.
Sahaj Desai said:
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.
Click to expand...
Click to collapse
:good::good::good:
Hei!!! You are the best. I followed your instructions and it seems it works 100%. You saved my day. I cant thank you enough.
ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
Click to expand...
Click to collapse
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(
Walter Black said:
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(
Click to expand...
Click to collapse
keep it charged overnight... fix the power button...then try the mentioned method...
ZUK Z1 Hard Bricked
Greetings, everyone. I've got a hard bricked zuk z1 which just went into the state all of a sudden.
I was using lineage o.s pie roms, and had faced some Random Reboots also. Not sure what happened, but here's what i did:
Installed zuk drivers
installed qualcomm drivers
installed adb and fastboot(minimal abd and fastboot)
installed qfil, which comes with QPST v2.7.0.460
--------------------------------------------------------------------------------
Downloaded the zuk stock firmware files
pressed vol+ and plugged the usb
Got detected in 9008 mode
QFIL also detected it and chose the correct files and started downloading in FLAT build
mode
now, QFIL shows this error at the end:-
Code:
10:17:52: INFO: Looking for file 'gpt_main0.bin'
10:17:52: INFO: Looking for file 'gpt_backup0.bin'
10:17:52: INFO:
Total to be tansferd with <program> or <read> is 78.85 MB
10:17:52: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
10:18:17: {ERROR: Could not write to '\\.\COM3', Windows API WriteFile failed! Your device is probably *not* on this port, attempted 100 times}
Writing log to 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt', might take a minute
Log is 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Fail:Process fail
Finish Download
Hope someone can help me . Oh, by the way, the bricking is like "fully-dead" bricking. No vibrations, display, led, nothing.
I feel i haven't done anything wrong in the steps also. SO, How to decode this situation??
i am face same problem "help please expert" my zuk z1 show logo and blew light after 10se not display on screen when touch with pc via usb many partition opening with error how to solve it
Hard partition damaged
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil
naseera422 said:
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil
Click to expand...
Click to collapse
Hello there!. As far as i know, from what you've said,
The phone still vibrates and shows led, which is a good thing.
About the qfil:
Check whether you are using the latest version of QFIL. Many errors did arise while using the earlier ones.
Make sure you haven't messed up any QFIL configuration settings, and check whether the selected build type is "FLAT".
If you are having trouble with the current firmware files, then download another one for the zuk z1, and check if it works. This is because errors can come from wrong/bad programmer files.
::::: This is all assuming that there are no driver issues & that you know well, how to work with QFIL :::::
Hope this helps....
Hi @xda Team,
couldn't find any threads releted to Sharp Z2, which would match to my issue, so that's why I'm trying it in this forum.
I have Sharp Z2 phone (https://www.gsmarena.com/sharp_z2-8410.php).
I tried to root it and to install/flash TWRP recovery on it. Because of realy less information for this phone it was difficult to find proper files.
So I tried with an official version of TWRP.... didn't worked.... after long time, I found on an chineese forum some instructions for flashing the TWRP through ADB/Fastboot.
Bacause I have successfully used this technology already several times on other phones, I was happy to have finaly found something AND forgot to check the skripts
The result is, that after unsuccessfully flashing the bootloader got blocked trough this script (OEM blocked). Now my phone is not booting. I have no access to FASTBOOT and to RECOVERY mode.
I have found an unbrick instruction for LeEco s3 (based on x620) using the SP Flashtool (I have used it successfully for my other phone LeEco S3).
Following this intruction on my Sharp I'm getting following message:
"BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
It looks to my, that I have not all permissions to flash the phone.
SO still NOT BOOTING, NO ACCESS to FASTBOOT AND TO RECOVERY MODE.
Also on XDA Forum I found this guide for an ASUS Phone (https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785)
UPDATE:
SP Flashtool is not able to load the preloader file. Always stops with the same error: BROM ERROR: STATUS_SEC_PL_VFV_FAIL......."
In some forums I've read that flashing with wrong preloader can cause my issue and that in this case there is nothing there to save / recover the phone.
I still hope, that because of the Android OS there is still a chae to unbrick it.
Please HELP!!!
Thanks in advance.
mine is in a similar state but i still have access to the fastboot; i can reboot to bootloader or recovery but only to acccess fastboot. there is no recovery tool left on it and attempt to flash twrp - various versions of those have all been failed attempts. handset is still in the brick state with access to fastboot but no use.
please help to get this working again, given the fastboot is working, can i use any other recovery tool except for twrp to maybe get to having OS flashed?
Hi. On the forum 4pda have firmware under flashtool
can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?
taulu7 said:
Hi. On the forum 4pda have firmware under flashtool
Click to expand...
Click to collapse
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
VanDragon said:
can anybody provide correct preloader file for this phone (Sharp Z2 FS8002).?
Click to expand...
Click to collapse
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735
Anyone can port EUI/MIUI/Flyme or Nougat (lineage/CrDroid/RR) to Z2?
Both has same chipset Helio X20 (4/32)
LeEco Le2 X62x ROM [4pda.ru]
no changes
taras-fedora-syn said:
Port Miui Hellas TEAM, my logo and splashlogo
HTML:
https://www.needrom.com/download/twrp-for-sharp-z2/
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
HTML:
https://4pda.ru/forum/index.php?s=&showtopic=870393&view=findpost&p=76931735
Click to expand...
Click to collapse
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?
zeronavigator said:
-
-
So i follow every step but after flashing preloader there is only black screen again.
What should i do next?
Click to expand...
Click to collapse
I don't understand why to flashing preloader
TWRP --- Install ROM or SuperSu.zip
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on
taras-fedora-syn said:
firmware under flashtool
Click on the SP Flash Tool "Download" and connect the switched off phone with the Vol "-" key pressed as on the screen, the tick on the Preloader is not worth it! Release the key a few seconds after filling the 100% red bar. Wait for the end of the firmware and the appearance of a green tick. Disconnect the phone from the PC and try to turn it on
Click to expand...
Click to collapse
So i did with a firmware i found on 4pda forum for sharp z2 using this guide http://4pda.ru/forum/index.php?showtopic=870393&st=100#entry76931735
I managed to flash using vol- with VCOM drivers.
Tried to boot the phone and nothing changed.
Black screen, short vibration on power button but no progress, no fastboot no recovery no nothing.
i also tried to find this firmware TSP-1360-0-00WW-A03-update.zip in case i was flashing wrong files but there is nowhere available for download except baidu server on witch it need an acount with a phone verification.
Still dont understand what i am doing wrong..
Any ideas?
zeronavigator said:
Any ideas?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=870393&view=findpost&p=77195440
Spoiler - P.S.
If it doesn't work then yo need to flash the full backup,
I don't want to give my because my IMEI are there
So i managed to revive the phone.. but as expected no IMEI no Baseband blah blah blah..
..and of curse i have no backup of it.
Is there a tutorial \ guide on how to fix this problem on my sharp z2 ?
Thank you in advace
help me
can get the original rom from sharp-z2 and send the link to me download
I cannot go to baidu to download it because I am Brazilian and my number does not accept