Lg stylo 2~ need dll file !help!! - LG Stylo 2 Questions & Answers

Hi everyone. I'm new here. I have an LG Stylo 2, model # lgl82vl by Tracfone. A factory data reset was performed on it and now I can't get past the Google Verification screen. It also will not let me put it in download or recovery mode. I've tried using LGUP and it doesn't recognize the device. Does anyone have the dll file or know how to fix this? Thanks in advance.

Related

[Q] Lg g pad 7.0 LTE stuck in bootloop

Please help. I know this is for the 8.3 but there is not thread for the 7.0. I am stuck in a bootloop. When I put in download mode it wont install the MTP drivers so the LG flash tool wont work. Also I can't find the KDZ for the v410 to do it with out the internet. Also It wont detect adb. That is really all i need. I must have gotten the prob.build mixed up with my g3 and I need to put the original one back on there. yes I have a back up of it, but I can't access the system files. Any help would be greatly appreciated.
zylith said:
Please help. I know this is for the 8.3 but there is not thread for the 7.0. I am stuck in a bootloop. When I put in download mode it wont install the MTP drivers so the LG flash tool wont work. Also I can't find the KDZ for the v410 to do it with out the internet. Also It wont detect adb. That is really all i need. I must have gotten the prob.build mixed up with my g3 and I need to put the original one back on there. yes I have a back up of it, but I can't access the system files. Any help would be greatly appreciated.
Click to expand...
Click to collapse
have you try installing mtp drivers directly in windows? not from the tablet?
Yes. Called lg. They are fixing it. Even though it is rooted.
zylith said:
Yes. Called lg. They are fixing it. Even though it is rooted.
Click to expand...
Click to collapse
Hi, zylith. I have the same tablet and same bootloop problem now. i cant find KDZ file for it.
Did LG fix your tab? Any suggestion for me? Please help. Thx a lot!!!
I know it's an old thread but I still need some help. I rooted my LG Gpad 400 and proceeded to install the bumped version of TWRP through flashify. It prompted me with an error and got stuck on LG logo. I managed to turn it off and on again after a while and it worked just fine (no twrp installed though but today I wanted to unlock the oem to flash TWRP through adb the more traditional way but my tablet was stuck in rebooting - booted up for a few seconds and started rebooting again. Iwent for factory reset since I didn't have any data on it so nothing to lose but now it's saying 'Factory reset processing...' and has beenm on this screen for good half an hour and counting. Please help.
Today my tablet is back to restarting constantly. I really don't know what to do and it makes the tablet unusable as I can't access the settings menu to extract IMEI necessary for OEM unlock. Please help x

[Q] LG Leon 4G bricked

Hello Guys,
yor are my last hope!
I tried to root my device but there was no working way for it.
So i decided to use this guide (http://forum.xda-developers.com/android/development/root-t-mobile-lg-leon-5-1-1-lollipop-t3194145) to root my phone. I didn't know that this Telekom software is simlocked so i used another guide to unbrick it. Unfortunately it came out that the software i used at this time was the metro pcs version of the stock firmware.
Now i am looking for a working stock firmware cause every german/france software from this pages (http://lg-phone-firmware.com/index.php?id_mod=171) and (http://www.lg-phones.org/category/lg-leon) didn't worked for me.
Every time i tried the 3GCT with Emergency and the cdma with cs_emergency way.
But it always ends in a bootloop with the lg logo and the android symbol then restart and long time LG logo.
I don't understand why Telekom and Metro PCS versions worked but the others don't.
It would be great if you could explain me this.
Greetings
Sven
Hi there! I'm in the same situation. :/ Any help?
I have the same problem too. There's already topic about this, but nobody found solution yet. :/
My god! I have the same BIG problem with LG Leon LTE H340n (C50)! HELP!
Help
Hey guys, I'm a new member so I can't start my own thread so I figured I'd try this out. I bought a LG risio (Leon) off of craigslist and the dude factory reset it when I handed him the cash but now it's asking me for a e-mail or phone number that was previously used with the phone and now I can't get a hold of the guy. Is there any way to get past this situation or am I screwed?
Please don't hate on me for posting this where I did. I just don't have any other options so if someone can help me please do.
Sdh0706 said:
Hey guys, I'm a new member so I can't start my own thread so I figured I'd try this out. I bought a LG risio (Leon) off of craigslist and the dude factory reset it when I handed him the cash but now it's asking me for a e-mail or phone number that was previously used with the phone and now I can't get a hold of the guy. Is there any way to get past this situation or am I screwed?
Please don't hate on me for posting this where I did. I just don't have any other options so if someone can help me please do.
Click to expand...
Click to collapse
This method is USEFUL for your situation & unbricking lg Leon LTE
This method is for ONLY metroPCS
Don't hold me responsible if this method doesn't restore your phone or makes it worse. THERE IS NO WAY TO DOWNGRADE BACK TO ver MS34510B after using this method.
Install
LG United Mobile Driver 3.14.1
LG Flash tool 2014 (build 03/07/2014)
After flash tool installation
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open device manager and changed the LGE Mobile USB Serial port to COM 20
5. Open the Flash Tool
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : MS34510D_00.KDZ
9. Click on Normal Flash
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
MS34510d kdz file: https://mega.nz/#!VNtDCb6C!wotJiiw1CfVNTlpxG3XRnsgiLNtUmzB6zj3tkraNB9s
Lg leon hard brick
I'm having issues with my LG Leon today.I tried to downgrade to v10b in my actual version v10d to Root.I actually tried that but i got problems.When It was 98% stopped and black screen.Everytime now that I restart my smartphone I don't even see the LG logo or nothing just black screen loop but when I do that connected to my computer, I can hear the sound of "recognized" and then "not recognized" and It loops every 15 seconds ~
HELP HELP HELP PLZ
ayoub lg leon said:
I'm having issues with my LG Leon today.I tried to downgrade to v10b in my actual version v10d to Root.I actually tried that but i got problems.When It was 98% stopped and black screen.Everytime now that I restart my smartphone I don't even see the LG logo or nothing just black screen loop but when I do that connected to my computer, I can hear the sound of "recognized" and then "not recognized" and It loops every 15 seconds ~
HELP HELP HELP PLZ
Click to expand...
Click to collapse
Does it have unlocked bootloader? Did you try to enter firmware upgrade mode to flash the correct kdz?
leandeganis said:
Does it have unlocked bootloader? Did you try to enter firmware upgrade mode to flash the correct kdz?
Click to expand...
Click to collapse
yes i try but i cant entre to download mode my lg leon is mt6582 cpu any fix for this probleme i think is hard brick probleme so please help me
ayoub lg leon said:
yes i try but i cant entre to download mode my lg leon is mt6582 cpu any fix for this probleme i think is hard brick probleme so please help me
Click to expand...
Click to collapse
Have you unlocked the bootloader ? Can you access at east to factory reset mode so to wipe data partition?
Lg leon hard brick
leandeganis said:
Have you unlocked the bootloader ? Can you access at east to factory reset mode so to wipe data partition?
Click to expand...
Click to collapse
i unlock bootloader :crying:
no i cant do that my phone is completly dead no download mode no fastboot no recovery any thing but when i conect it to pc it show as a mtk usb port but only 5 second and reconect so i think a scatter file to flash it with sp flash tool please help me help me
YES i unlocked the bootloader

My LG F800L doesn't turn ON after H918 kdz installation! HELPPPP

Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
I think you destroyed your phone
You should get it to repair service
lol, u just facing the same problem with me, i did exactly the same what u do, was looking around for solution, but nothing really helpful out there, the only way i found is the method with sd card, u get the debrick img file, burn it to a 32gb sd card with the right tool, put sd card to your phone and hope it will get to downloadmode or fastboot or whatever idknow cause i'm don't have the debrick.img file for F800L, looking for it right now, people say u can get that file from the phone (has same model) that still working, that all i know for now, if u found anyway to fix your phone please told me :highfive:
It has been repeated over and over and over "DO NOT FLASH ANYTHING THAT IS NOT MEANT FOR YOUR DEVICE" and also "FLASH AT YOUR OWN RISK". Both of them together makes it pretty clear that you shouldn't have flashed something that was meant only for the h918 into an f800l variant. Developers dont write this down as fancy words or for fun. They do it in order to let everybody know that if flashed, it could easily alter your system in such a way that it might never be fixed except by the company itself. By flashing something that wasnt meant for your device, you are trying to override the system with an image. And if the developer never made the source compatible with yours, then software and hardware will be contradicting each other. The motherboards of the phones comes for its specific variants and only developers can alter an image of a system to make it somewhat compatible with the variant.
Now, lets hope you get an answer to how to fix it because LG wont be fixing it for you since you voided your warranty by a) the simple fact of unlocking the bootloader (which is pretty easy to identify since it shows the warning sign when you turn the phone on), and b) you rooted the device. And LG wont work with neither of those. Unless.... and this is a maybe because i dont know if they would agree too (if you pay the sum they request to fix it, which i assure you it will be more that $100+ maybe even significantly more). Then they fix it for you.
I personally made a backup in a separated MIcro SD card i have outside the phone. So that if i have problems with my system, then i just insert that micro sd card and restore the backup.
Good luck!
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
oh my god, if u stop at the step KDZ tool found your device that H918, I can help you. Just boot to fastboot mode and fastboot the file name bootbackup.img and KDZ tool will found your device is F800L then KDZ normally. Sorry for my bad English.
gamza88 said:
Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
Click to expand...
Click to collapse
hi did you find any way to help ? i m in similar position
me2151 said:
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
Click to expand...
Click to collapse
Hello My Friend,
I have F800s and I rooted by your methos and did exactly the same thing as OP installed H918 rom through twrp. Now I can only go in download mode and LGUP reads my phone as H918 what should I do please help .

LG G6 Flashed Wrong Firmware/Unable to Flash .KDZ File Fix

Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
JD6750 said:
Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
Click to expand...
Click to collapse
Can I up the rom H873 for G600LP? And can fix by your way?
Well, this is a standard "fix"...
Everyone should know how to do that before even flash anything. Nothing new, but is nice to see that you have saved a G6...
Do you know how to solve that no sound bug in lg g6 g600l....
JD6750 said:
Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
Click to expand...
Click to collapse
Hy sir my lgg6 g600l running on oreo had some issues it restarts and go to ded silent and after spending some time with it it got fixed after the restart. I dont kow what the issue is not using any app at all. it does even after factory reset. any help would be appriciated. also i want root access .........
lg g6 g600l
hello team of experts i have lg g6 g600l which is running android 8 orio i ried to upgrade to 9pie on lgup but i did a mistake of did not enter my phone in download mode thats why the upgrade procces is not succesfull and now i am facing an error on lg up
0x81000302, please use latest DLL LAF Protocol version is not match DLL=150423472 Device=201969696. so what to do now to get back my phone
ab63 said:
hello team of experts i have lg g6 g600l which is running android 8 orio i ried to upgrade to 9pie on lgup but i did a mistake of did not enter my phone in download mode thats why the upgrade procces is not succesfull and now i am facing an error on lg up
0x81000302, please use latest DLL LAF Protocol version is not match DLL=150423472 Device=201969696. so what to do now to get back my phone
Click to expand...
Click to collapse
You need to find correct DLL file. Search xda forum or google
is some one have the right DLL files for lg g6 600l
Please Help, my G6 not detected in Device manager in Download mode i have installed all necessary drivers but not detected. thanks.
charledave said:
Please Help, my G6 not detected in Device manager in Download mode i have installed all necessary drivers but not detected. thanks.
Click to expand...
Click to collapse
make sure u use a good cable and also make sure you have the latest google usb drivers from android studio
Download lgup dll for g8 and lg up. New protocols inside of dll.

urgent help needed phone stuck on LG logo

hi guys
i updated my LG G6+ phone from oreo to pie manually using uppercut and the process seemed to be going well until i finished updating and clicked on click here to continue successful message in the program but after that the phone is stuck on LG logo ever since and the best i can do is entering it to download mode again and whatever i tried to reinstall the pie KDZ file of reinstall the previous oreo version the program said please use latest dll and nothing more how can i make the phone reboot and work again normally???
any sort of help and especially effective help will be highly appreciated

Resources