[UTIL]Gsd Android Tool v1.0.1 Developer Assistant, Bypass َAndroid And More ...

[UTIL]Gsd Android Tool v1.0.1 Developer Assistant, Bypass َAndroid And More ... - Android Software Development

Hi all xda users
We previously released v1.0.0 version of this tool on this topic, And many users were demanding to make a new version of the tool
Today we release new version of our software gsd android tool v1.0.1 with new ui and more ability , You can follow the Tools capabilities with this Topic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gsd android tool is a tool for Android phone service
The unique features of this tool will definitely attract your attention
Click to expand...
Click to collapse
Impact Tools features
Part of samsung > Unlock This option is called Samsung, but you can also use it for other Brand.
1 - scan and full information In Selected Mode
2 - Reset Frp Adb Mode
3 - Reset Frp dial Mode
4 - Bypass All Screen Lock In Frp = On Or of and Oem = on Or Of encrypted data partition and uncrypted Need Flash Eng-root
5 - Bypass All Screen Lock In Adb Mode = need Root Access
6 - Bypass All Screen Lock In Twrp Mode = No need Root and More ...
7 - Bypass All Screen Lock In sideload Mode = Custom Recovery Data Modification Method
8 - Bypass All Screen Lock In Sildeload Mode = Custom Recovery Need (encrypted data Partition)
9 - Important Make RvSecuRity use Boot.img for Unlock = No need Root Or any Think Just Need Boot.img
What is RvSecuRitY?
We succeeded in 2014 by modifying the kernel, unlocking the Android device without clearing the data
Then we began mass production of these kernels for each Android device We put the names of these kernels "RvSecuRitY" (Remove Security)
We added the button for making these kernels to this software. you can drop boot.img to input section and get remove screen lock kernel very easy And write it by flasher(Odin , Spflashtool, and more ... ) on the device
This tool unlock all encrypted data partition w/o data loss
This method no need to twrp or root , you just need orginal boot.img (that you can extract from orginal firmware)
Click to expand...
Click to collapse
samsung > Android Part You can use some of the options for this brand for other brands.
1 - Read Full Information
2 - exit Safe And Factory Mode = Need Root Access
3 - Full Format Device = Need Root Access
4 - enable Multi Language Samsung = Need Root access
5 - ٍٍEnable Call recording (The main functionality hidden in Samsung.)= Need Root access
6 - Enable Blacklist (The main functionality hidden in Samsung.) = need root Access
7 - ٍEnable Hardware Version In About Phone(The main functionality hidden in Samsung.) = Need Root Access
8 - disable update System Notification = Need Root access
9 - disable Anti-Malware Application Samsung = need Root Access
10 - Enable Camera Shutter (The main functionality hidden in Samsung.)
11 - reboot Device In Normal , download , recovery , Bootloader Mode
12 - Write File (flash) In sideload Mode
13 - Important Read (backup) automatically boot , cache , efs , hidden , param , recovery , system partition = dd backup in Adb Mode Need Root Access
14 - Important Restore (backup) automatically boot , cache , efs , hidden , param , recovery , system partition = dd backup restore in Adb Mode Need Root Access
Click to expand...
Click to collapse
Other Brands > Main Menu
1 - Read Full Information on Device = Adb Mode
2 - Read Package Name System and Non=system Applocation = adb mode
3 - Bypass all Screen Lock = Need Adb and Root Access
4 - Full Format Device = adb Mode Need Root Access
5 - Enable Multi Language Htc Devices = adb Mode Need Root Access
6 - Important Get Length and Begin Address For Reset Frp Mediatek Devices (you can unlock Frp by using Length and Begin Address)
7 - Backup Nvrm Mediatek Device = adb mode Need Root Access
8 - write Nvrm Mediatek Backup = adb Mode Need Root Accesss
9 - Important
10 - adb Reboot Device To Edl mode , recovery , Fastboot , Normal Mode
11 - Find Country Device Use imei Phone
Click to expand...
Click to collapse
Other Brand > Fastboot Part
1 - Read Full Information Device !
2 - Read Full Information Hisilicon Devices Emmc
3 - Frp Reset = Need Bootloader Unlocked
4 - Full Format Device = Need Bootloader Unlock
5 - Relock Bootloader Unlocked
6 - Erase Partition Menu (Erase Boot , Recovery ,System , Data ,cache Partition)
7 - unlock Bootloader menu (Unlock Bootloader Use Code Sony , Huawei and more ... and Unlock Bootloader Htc Device Use Unlock.bin)
8 - reboot fastboot in edl mode , bootloader , RUU , Normal Mode
9 - Flash Single File + Erase (Flash boot , recovery , system , splash , radio , data )
10 - advanced Menu Flasher (Flash Multi file zip File , Boot , Recovery , Recovery2 , system , data , splash , radio , Modem , Cache , cust , Fastboot , Nvme files)
11 - Nokia X , Xl , X+ Flasher Menu (system , boot , recovery , variant , data , cache , Preload)
Click to expand...
Click to collapse
Important Developer Tools > System.img Tools
1 - Read Full Information System.img File
2 - Unpack any System.img 2.3 to 7.x
3 - Repack System Folder 2.3 to 7.x
4 - Convert Sparse Header System.img To 32
5 - Make System.img Flashable In flashers On You Device (Need Root Access)
Click to expand...
Click to collapse
Important Developer Tools > kernel Tools
1 - Unpack Recovery , Boot.img
2 - Repack Unpacked Kernel
3 - Convert File_Contexts.bin To File_Contexts For Repack system Extracted Folder
4 - Important Make RvSecurity Kernel For Bypass All Code = Need Boot.img
5 - Make adb Enabler Kernel = need boot.img
6 - Important make Pre-root Kernel (Chainfire Instructions) = need Boot.img
7 - Make Dm-verity Error Fixer = need Boot.img
Click to expand...
Click to collapse
End of capability definition
To help you use this tool , We added a "Tooltip" for guidance , You can move your mouse over the button and see the functionality of the button.
If I had an empty time. In the future, I will try to get the full tutorial on how to use this tool in the next section
If you have any problems, please report this topic . This tool is portable Version No Need Install
Prerequisite for using this software:
NetFramework3.5
download links :
Gsd_Android_Tool_V1.0.1_Release_Portable
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
enjoy.:highfive:

asgharSo said:
Hi all xda users
We previously released v1.0.0 version of this tool on this topic, And many users were demanding to make a new version of the tool
Today we release new version of our software gsd android tool v1.0.1 with new ui and more ability , You can follow the Tools capabilities with this Topic
Impact Tools features
Part of samsung > Unlock This option is called Samsung, but you can also use it for other Brand.
samsung > Android Part You can use some of the options for this brand for other brands.
Other Brands > Main Menu
Other Brand > Fastboot Part
Important Developer Tools > System.img Tools
Important Developer Tools > kernel Tools
End of capability definition
To help you use this tool , We added a "Tooltip" for guidance , You can move your mouse over the button and see the functionality of the button.:angel:
If I had an empty time. In the future, I will try to get the full tutorial on how to use this tool in the next section
If you have any problems, please report this topic . This tool is portable Version No Need Install
Prerequisite for using this software:
NetFramework3.5
ِDonate Me
download links :
Gsd Android Tool V1.0.1 Release Download - Mediafire Link
Gsd Android Tool V1.0.1 Release Download - gsm-developers Link
Gsd Android Tool V1.0.1 Release Download - 4Shared Link
enjoy.:highfive:
Click to expand...
Click to collapse
thank you so much for the good tools ??

9jarom said:
it's a Great Tool but nothing new
...only if it can remove Samsung frp 7.0 in download mode or switch from MTP to ADB
Click to expand...
Click to collapse
hi dear
This tool has better functionality
unlock s6,s7,s8 one5 ,not5 and more without losing data in the case of frp = on and oem = on
And there are dozens of other features that are not included in any of the free tools.
thanks

problemathic said:
downloaded it but cant use it. just having the tool is only loading. why?
Click to expand...
Click to collapse
if solutions not work for you,use this tool
Replace this tool on gsd android tool.exe
Code:
http://www.mediafire.com/file/tn8x4s4ecen5cew/Gsd%20Android%20Tool.zip

Very Well Crafted....Kudos!
Having tinkered with well over a dozen similar tools over the past couple of years....I can only say.....Kudos to all involved in this project! It is very well crafted indeed and covers a very respectable gamut of tools while managing to be quite expeditious throughout the process. Most importantly...it works like a Swiss watch....precisely and reliably. Are there other things it could do?...Well...that's like asking a muscle car owner if there are any other bolt-ons his car could accomodate....right?
Again...Awesome Job!!...but a wise man once told me...when you start to break ahead of the pack...that's when you need to run twice as fast....

asgharSo said:
Hi all xda users
We previously released v1.0.0 version of this tool on this topic, And many users were demanding to make a new version of the tool
Today we release new version of our software gsd android tool v1.0.1 with new ui and more ability , You can follow the Tools capabilities with this Topic
Impact Tools features
Part of samsung > Unlock This option is called Samsung, but you can also use it for other Brand.
samsung > Android Part You can use some of the options for this brand for other brands.
Other Brands > Main Menu
Other Brand > Fastboot Part
Important Developer Tools > System.img Tools
Important Developer Tools > kernel Tools
End of capability definition
To help you use this tool , We added a "Tooltip" for guidance , You can move your mouse over the button and see the functionality of the button.:angel:
If I had an empty time. In the future, I will try to get the full tutorial on how to use this tool in the next section
If you have any problems, please report this topic . This tool is portable Version No Need Install
Prerequisite for using this software:
NetFramework3.5
ِDonate Me
download links :
Gsd Android Tool V1.0.1 Release Download - gsm-developers Link
Gsd Android Tool V1.0.1 Release Download - 4Shared Link
enjoy.:highfive:
Click to expand...
Click to collapse
the greatest free and paid tools for samsung i had seen ever!!!
a great thanks to you brother:good::laugh:

Open Source
is this available on github?
nice work btw

VirtualBornSkiller said:
is this available on github?
nice work btw
Click to expand...
Click to collapse
No sir, This is not open source
good luck

Thnks much.....

where should i flash the revsecurity file in odin ?
in ap or bl ?

salamkonaziz said:
where should i flash the revsecurity file in odin ?
in ap or bl ?
Click to expand...
Click to collapse
No difference
But it's better to put it in ap.

asgharSo said:
No difference
But it's better to put it in ap.
Click to expand...
Click to collapse
Why always AP?? oh well, Im not complaining. Listen, thank you guys for making such a great tool and sharing it!!! Blow away! May innovation be like a sister to you and yours. Question though.... so basically I can flash and tweak phones with what chip support? I missed it. Qualcomm (obviously because of Samsung) but MediaTek too? Also, how difficult would it be to port this to a Linux OS, if I used something like CrossOver or Wine or similar?
-Bad Rx__

BadRx said:
Why always AP?? oh well, Im not complaining. Listen, thank you guys for making such a great tool and sharing it!!! Blow away! May innovation be like a sister to you and yours. Question though.... so basically I can flash and tweak phones with what chip support? I missed it. Qualcomm (obviously because of Samsung) but MediaTek too? Also, how difficult would it be to port this to a Linux OS, if I used something like CrossOver or Wine or similar?
-Bad Rx__
Click to expand...
Click to collapse
Hi dear
If you put the file in bl, it will be writed
Odin software write it to the device based on the kernel name or file system in the tar file.So it's not important to put in either ap or in bl
You can use this method for any processor or brand.Only your device must accept custom binary.(boot.img RvSecurity)
For the Linux version, I try to write the next version
thanks and good luck

Gsd Android Tool Open Error
Gsd Android Tool Open Error How to Solve

這是一個很棒的工具
我見過的三星最好的免費和付費工具!!!

Well first things first.. i have no idea for what are 90% of options there BUT i somehow know it is CORE app now to unlock galaxy s7 edge.. but now the part where i need to ask anybody to lead me step by step (TOTALLY) how can i (and if i can) install custom recovery using this tool? Problem with my device is my volume buttons are totally non functional this is why i never was able to switch from Odin mode to recovery instantly by buttons combination (in result - always locked device and had to flash stock rom). I am on Stock Android 8.0 for S7 Edge G935F. Sorry for typing like a noob (a actually rooted/unlocked a lot of devices sometimes spending a lot of time on it but without volume buttons I am in dead point) PS. Last time i had to make 300kOhm device to get my phone into download mode so I am able to get into download but i am not able to use volume keys. And again thanks for any tips/tutorials etc

MavericzeK said:
Well first things first.. i have no idea for what are 90% of options there BUT i somehow know it is CORE app now to unlock galaxy s7 edge.. but now the part where i need to ask anybody to lead me step by step (TOTALLY) how can i (and if i can) install custom recovery using this tool? Problem with my device is my volume buttons are totally non functional this is why i never was able to switch from Odin mode to recovery instantly by buttons combination (in result - always locked device and had to flash stock rom). I am on Stock Android 8.0 for S7 Edge G935F. Sorry for typing like a noob (a actually rooted/unlocked a lot of devices sometimes spending a lot of time on it but without volume buttons I am in dead point) PS. Last time i had to make 300kOhm device to get my phone into download mode so I am able to get into download but i am not able to use volume keys. And again thanks for any tips/tutorials etc
Click to expand...
Click to collapse
DId you get this done? Im in same situation except i have the Samsung S7 GM 930W8

legendzj said:
DId you get this done? Im in same situation except i have the Samsung S7 GM 930W8
Click to expand...
Click to collapse
Well for me worked out flashing TWRP(in twrp turn off auto reboot) and i was able to turn off phone by myself by unplugging the battery (yea unplug when in download mode after flashing TWRP then flash back into download mode (i used USB JIG made by myself) and then through twrp i flashed eng-root with autoreboot and it flashed directly to the twrp BUT i dont know if this will work also for you keep that in mind

MavericzeK said:
Well first things first.. i have no idea for what are 90% of options there BUT i somehow know it is CORE app now to unlock galaxy s7 edge.. but now the part where i need to ask anybody to lead me step by step (TOTALLY) how can i (and if i can) install custom recovery using this tool? Problem with my device is my volume buttons are totally non functional this is why i never was able to switch from Odin mode to recovery instantly by buttons combination (in result - always locked device and had to flash stock rom). I am on Stock Android 8.0 for S7 Edge G935F. Sorry for typing like a noob (a actually rooted/unlocked a lot of devices sometimes spending a lot of time on it but without volume buttons I am in dead point) PS. Last time i had to make 300kOhm device to get my phone into download mode so I am able to get into download but i am not able to use volume keys. And again thanks for any tips/tutorials etc
Click to expand...
Click to collapse
first write eng-root then bypass use this tool
i'm developing new version of Gsd android Tool
we add many Option For bypassing Screen Lock (android 7,8__)
Screen Shot Of new version :
https://twitter.com/ILYA20_GSD/status/1054027375816724481
Cooming Soon ... !

asgharSo said:
first write eng-root then bypass use this tool
i'm developing new version of Gsd android Tool
we add many Option For bypassing Screen Lock (android 7,8__)
Screen Shot Of new version :
https://twitter.com/ILYA20_GSD/status/1054027375816724481
Cooming Soon ... !
Click to expand...
Click to collapse
Haha thanks for respond anyway I managed to get it working then but for now my S7 Edge is dead (screen flickering after drop). Thanks for respond and tutorial for others anyway! Have a nice day

Related

[ROM] HUAWEI Ascend W1-U00 | v1.32 | Now available !!

Hi all
I would like to everyone present the first Custom Windows Phone 8 ROM for HUAWEI Ascend W1-U00.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Informations
Windows Phone 8.1 GDR1
Build 14219
Dev unlock
Interop unlock
All capabilities
Changed size partitions :
MainOS - 2,1 GB
Data - 1,5 GB
Additional
Can enable mass storage mode
Searching updates PfD
without dev account and app from market.
Available 51 Langs
ar-SA
az-Latn-AZ
be-BY
bg-BG
ca-ES
cs-CZ
da-DK
de-DE
el-GR
en-GB
en-US
es-ES
es-MX
et-EE
fa-IR
fi-FI
fil-PH
fr-CA
fr-FR
he-IL
hi-IN
hr-HR
hu-HU
id-ID
it-IT
ja-JP
kk-KZ
ko-KR
lt-LT
lv-LV
mk-MK
ms-MY
nb-NO
nl-NL
pl-PL
pt-BR
pt-PT
ro-RO
ru-RU
sk-SK
sl-SI
sq-AL
sr-Latn-CS
sv-SE
th-TH
tr-TR
uk-UA
uz-Latn-UZ
vi-VN
zh-CN
zh-TW
How to flash ?
So... The whole update process will proceed in two steps. The first step is flashing the ROM in which certain features are unlocked (required for flashing custo ROM). Performance of the system, its working, etc have not been changed. The second and last step concerns flashing Custom ROM.
! REMEMBER! Everything you do at your own risk.
Step 1 !
a) Download ROM and Flash tool
b) Run "HWDiagnosticApp (##2846579#) ", turn on "Diag settings" and reset phone.
c) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
d) Now your phone should reset and start in download mode.
If your phone does not want to start the download mode, use QPST
e) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it .
Step2 !
Before you begin the process of flashing Custom ROM, make sure that you have a ROM with ability to run the device in mass storage mode. If not, flash it. Also remember that after flashing Custom ROM you need perform the first start (until you see the start menu). If you already have ROM with the ability to run in mass storage mode, you can follow the below instructions.
a) Download latest ROM + WP8CRUU, link at the bottom of the page.
b) Run device in mass storage mode
c) Run WP8CRUU.exe and follow the instructions in the program.
!!Attention!!If you have Custom ROM , you only need start the phone in Mass Storage mode and flash new Custom ROM with WP8CRUU. You do not have flash everything from scratch !!
How to Enable Mass Storage Mode ?
This is very simply, when you start your phone, press "cam" + "vol -" .
Changelog :
v1.32
- Build 14219
- Corrected some regstry entries
- Rebuild firmware packages
- Solved problem with the updates
Now you can update to W10 !
How to do it? Instruction is given below
You need set this values :
[HKEY_LOCAL_MACHINE\SYSTEM\Platform\DeviceTargetingInfo]
"PhoneManufacturer"="NOKIA"
"PhoneManufacturerModelName"="RM-976_1115"
"PhoneFirmwareRevision"="01061.00066.14235.36003"
"PhoneHardwareVariant"="RM-976"
"PhoneMobileOperatorName"="000-GB"
You can use this REG editor (working without CustomWPSystem app)
Important! You need choose "sign in with different account" in Windows Insider otherwise the program will not search for updates !
v1.10
- Fixed a bug with memory card detection
- Fixed bug with incorrect reading of the battery status
Click here to download v1.32
Click here to download v1.10
Click here to download v1.00
Super Big thanks for donations :
€10,00 EUR
$15,00 USD
$16,00 USD
$33,00 USD
$66,00 USD
If you appreciate my work, click it

Good work!
May be you should hide langs under a spoiler.

Trying not to get jealous --- Lumia user here

Great work indeed! When you say "mass storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)? That would be... very impressive. I'm guessing you need to reboot the phone to enter such a mode though. Alternatively, if you "just" mean Full FS Access via MTP, that's still very cool.
One thought: did you include the Samsung RPC server (so that tools written for interop-unlocked Samsung phones will work)? If not, it may be difficult to port some apps; not all the relevant parts of the registry are writable even with capability unlock (unless you modified the registry ACLs) and I can't find an arbitrary registry write function in the Huawel WINMDs (although there may be one I just didn't see; I did find a read function).

GoodDayToDie said:
Great work indeed! When you say "mess storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)? That would be... very impressive. I'm guessing you need to reboot the phone to enter such a mode though. Alternatively, if you "just" mean Full FS Access via MTP, that's still very cool.
One thought: did you include the Samsung RPC server (so that tools written for interop-unlocked Samsung phones will work)? If not, it may be difficult to port some apps; not all the relevant parts of the registry are writable even with capability unlock (unless you modified the registry ACLs) and I can't find an arbitrary registry write function in the Huawel WINMDs (although there may be one I just didn't see; I did find a read function).
Click to expand...
Click to collapse
I saw read/write dword functions somewhere in Huawei apps.

Finally. This literally might be the only way to upgrade the Tracfone version since straight talk has no plans on releasing a update. Been flashing all the foreign GDR2 Huawei W1 ROMS and all work fine but don't allow me to use 3G. Really hope this project takes off and possibly a work around for users with the Tracfone branded version of the phone.

soft of reker work in your rom?
http://forum.xda-developers.com/showthread.php?t=2685826

reksden said:
soft of reker work in your rom?
http://forum.xda-developers.com/showthread.php?t=2685826
Click to expand...
Click to collapse
You can't talk about copyright.

-W_O_L_F- said:
You can't talk about copyright.
Click to expand...
Click to collapse
I'm writting:
reker written this xap and jailbreak. I don't change original files.

GoodDayToDie said:
When you say "mass storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)?
Click to expand...
Click to collapse
Yes ... If you can enter to Mass storage mode you need reboot phone and press appropriate buttons
anonymous007 said:
don't allow me to use 3G
Click to expand...
Click to collapse
In my ROM 3G works fine !

WojtasXda said:
Yes ... If you can enter to Mass storage mode you need reboot phone and press appropriate buttons
In my ROM 3G works fine !
Click to expand...
Click to collapse
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh

reksden said:
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh
Click to expand...
Click to collapse
Hmmm , you should stop posting **** like that in threads it doesn't belong !!!!!
HARDWARE HARDWARE HARDWARE isn't the same !!!
read this and read it real carefully.
http://forum.xda-developers.com/showpost.php?p=51233276&postcount=5
and ps , nbh is a container , in that container are another few .nb containers , and they are signed !!!

reksden said:
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh
Click to expand...
Click to collapse
It didn't work without bricking your phone, because HTC has other hardware and other bootloader!
Please stop posting stuff in development thread if you don't know about development!
I'm sure WojtasXda will find a way to do this on all WP8 devices, BUT WAIT!

please can you give us the link off your rom ?

Update... Info in first post !

WojtasXda said:
Update... Info in first post !
Click to expand...
Click to collapse
This is great!!!
Bt is the a possibility to disable 3 collums?

athloni said:
This is great!!!
Bt is the a possibility to disable 3 collums?
Click to expand...
Click to collapse
Yes, you can disable 3 rows with WPH Tweaks by @jessenic: http://forum.xda-developers.com/showthread.php?t=2486387
Sent from my RM-915_nam_usa_228 using Tapatalk

Can I install WP8.1 with the Developer Preview program after using your ROM?

xdevilium said:
Can I install WP8.1 with the Developer Preview program after using your ROM?
Click to expand...
Click to collapse
Developer Preview only check some Registry Keys then apply a key I don't remember
When you have a Interop Unlocked devices you have Developer Unlock too . So there's no problem with using Dev Preview app.
I think next preview will release in 2nd of April , Yes?

ngame said:
Developer Preview only check some Registry Keys then apply a key I don't remember
When you have a Interop Unlocked devices you have Developer Unlock too . So there's no problem with using Dev Preview app.
I think next preview will release in 2nd of April , Yes?
Click to expand...
Click to collapse
yes
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
Where can I find "HWDiagnosticApp"?
Also will this work on Windows 8?

[UPDATED] [Tool-Windows] [ADB for noobs] [the simplest GUI ADB/Fasboot]

*THE TOOL IS UPDATED HERE, HOPEFULLY WILL FIX WHATEVER PROBLEM YOU HAD, WHATEVER! *
Hello and welcome ! , I wanna play a game :silly:
This tool made specially for noobs & lazy guys , as some of us hate working with any command prompt -and ADB/fastboot are command prompts- so they avoid using it , even if they needed to!
now forget that , this tool is the simplest Graphical user interface ADB,
which will grab popular ADB & Fastboot commands in simple combobox to use
Features..!
My tool is featured in XDA-Portal . Tab Here
Main Features
this tool is written in java, which mean the simplicity , the smallest size and the fastest functions!
this tool depends on your PC , it does nothing on it's own , that makes it very small (about 45 kb!) but powerful
Currently this tool is my only active project , so i'm working on updating it ASAP :good:
Features for human being (to use)
my tool does the most popular/important pure ADB & fastboot operations ,
these operations are :
Check if Device connected properly (adb devices).
Android Logcat.
Install a specific APK file(Android Application).
Uninstall apk <package> .
pull a file from your Android Device to your PC.
push a file from your PC to your Android Device.
Look at tasks running in your Android device.
Check your Android Device Memory usage.
Check your Android Device storage usage.
Kill all background processes.
Normal Reboot.
Reboot to recovery mode
Reboot to Download mode (for Samsung Devices).
Reboot to bootloader mode.
Reboot to Fastboot mode.
Unlock Patterns/passowords with two methods
Flash Update.zip.
Flash recovery.img.
Flash boot.img.
Wipe (System,data & cache) before restoring nandroid backup.
Flash system.img.
Flash data.img.
Flash cache.img.
My tool UI is very simple and easy to use , it's just about 300 x 450 JFrame

Requirements..!
You need JRE (the JAVA Runtime Environment ) to run the Tool , you can get it from here .
ADB / Fastboot in your PC (are you kidding?! :cyclops: ).
USB Debugging enabled in your Android Device.
a Human brain which can read the 'How To' in this Thread.
How to & Downloads..!
Download the "ADB For noobs STABLE V3.0.jar" FROM HERE (or in Downloads Tab up) ,
open the downloaded file and set your ADB directory and click Set Data button (you must do that at least once), to make the tool know where's your ADB to use it.
Select the desired operation , and add required directories , then tab Activate , and that's it ! , isn't it Simple ?! :good:
use Reset button to reset text fields
Screenshots...!
the Final release (3.0) :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old Version (2.5) :
Older Version (2.0) :
Even older Version (1.7) :
Or see the Screenshots Tab up.
How to help ?....
at first thanks for clicking "Click To Show Content" Button , that means you really want to help me :fingers-crossed:
Testing is the best method to help me.
you faced problem while using my tool ? let me know in the comments.
You have Suggestions ? .. PM Me with your suggestions .
you miss some adb/fastboot functions ? , feel free to request :good: .
DON'T FORGET TO CLICK MY
BUTTON .
Changelog...!
Code:
* 29 - 01 - 2015
the final release (3.0)
-fix : a few problems in the UI .. and a simple touch to the code.
-added : unlock patterns/passwords with 2 methods.
Note : no need to say that this update is just to leave that project sleep in peace , it just fixes some mistakes that I couldn't fix them because I didn't had enough time.
* 15 - 06 - 2014
release (v2.5)
-this version will give you the UI that you deserve ,look and feel is better and more simple than before.
-many pure ADB operations optimized.
-setting my data is more reliable (i'v optimized the code to get rid of these (Apk_dir.txt , P_dir.txt ....etc).
-reset button added (to reset text fields).
-the problem of (confirm dialog) that repeat the operations fixed.
-check updates button added (will open this thread's link).
-now all operation that returns output like (logCat , adb Devices.....etc) will store their logs in .text files.
-tool size reduced from 60 kb to 38 kb , lol .
* 10 - 06 - 2014
the third release (v2.0) :
-this version has several UI optimizations to make things 80% easier than before.
-many code problems solved , problems with some operations solved.
-storing all data in one folder ("Data") to make the look unique.
* 05 - 06 - 2014
the second release (v1.7) :
-code optimization , fixed 2 tools problems.
-now the adb / fastboot command prompt will close immediately after finishing an operation, except in memory/storage usage and logcat.
-new adb & fastboot options are added :
-Kill all background processes.
-Reboot to recovery mode.
-Reboot to Download mode (for Samsung Devices).
-Reboot to bootloader mode.
-Reboot to Fastboot mode.
-Flash Update.zip.
-Flash recovery.img.
-Flash boot.img.
-Wipe (System,data & cache) before restoring nandroid backup.
-Flash system.img.
-Flash data.img.
-Flash cache.img.
-the tool will create folder called patch to store all my .bat scripts in it.
* 03 - 06 - 2014
the initial release (v1.0) .
Credits...!
My Friend @kermage .... thanks for helping and Suggestions :good: :fingers-crossed:
My Friend Yusuf Badr ... thanks for Testing :good: :fingers-crossed:
XDA:DevDB Information
ADB for noobs (GUI ADB/Fastboot), Tool/Utility for all devices (see above for details)
Contributors
Mohamed Hashem
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2015-01-29
Current Beta Version: 1.7
Beta Release Date: 2014-06-03
Created 2014-06-03
Last Updated 2015-01-28

Reserved
supposed to be reserved for unknown thing , who cares!

apple pie
DON'T FORGET TO CLICK MY
BUTTON .

Amazing work
Nicely done :good: :good: keep it up

Up!

Good job! :good:
But maybe on the next update, try to make it really for noobs & lazy guys; a 1 tool, installation/settings in the first run.

kermage said:
Good job! :good:
But maybe on the next update, try to make it really for noobs & lazy guys; a 1 tool, installation/settings in the first run.
Click to expand...
Click to collapse
i understand that you mean Setup window at first run .. but this will make the app for windows only , also you just need to run the 1st tool just once , then you can just delete it , but i'll try my best to make it easier , btw , before a day from making this thread , it was so dummy and you should add your adb dir every time to run it , as this pic : http://i.imgur.com/xbwtquz.jpg
btw , what about it's operations , you find any thing bad ? thx very much for your help and report
EDIT: Oh , i think i got an idea .. next update will solve this , also will have more operations , may be fastboot commands too

Mohamed Hashem said:
i understand that you mean Setup window at first run .. but this will make the app for windows only , also you just need to run the 1st tool just once , then you can just delete it , but i'll try my best to make it easier , btw , before a day from making this thread , it was so dummy and you should add your adb dir every time to run it , as this pic : http://i.imgur.com/xbwtquz.jpg
btw , what about it's operations , you find any thing bad ? thx very much for your help and report
EDIT: Oh , i think i got an idea .. next update will solve this , also will have more operations , may be fastboot commands too
Click to expand...
Click to collapse
No need for setup window, use java ini/properties file instead.

new update is out , check the changelog and Screenshot :good:

Now that the Gear has moved from Android to Tizen we need a modded version to work with SDB instead of ADB.

Mohamed Hashem said:
new update is out , check the changelog and Screenshot :good:
Click to expand...
Click to collapse
Are you missing a DLL file from your Java Program? I'm getting Java errors stating it can't find the main class of the file. I'm running Windows 7 32-Bit and Java 6 Standard Edition installed.

how can i use it to flash twrp or cwm img file to my phone??

Would be perfect if it had a feature to batch install apks.

jman1234 said:
Would be perfect if it had a feature to batch install apks.
Click to expand...
Click to collapse
sorry didn't understand that .. i mean it had "install apk" option , but what do you mean with batch install apk ?
mashnino said:
how can i use it to flash twrp or cwm img file to my phone??
Click to expand...
Click to collapse
just add the file you want to flash in the 1st text box called "select file to install / flash / push and then select the option from combo box
rootdefyxt320 said:
Are you missing a DLL file from your Java Program? I'm getting Java errors stating it can't find the main class of the file. I'm running Windows 7 32-Bit and Java 6 Standard Edition installed.
Click to expand...
Click to collapse
no it's just fine with me and others :\ , upgrade to higher Jre or redownload
Guys , new update is coming today or tomorrow , will make things much easier :good:

Mohamed Hashem said:
...
Click to expand...
Click to collapse
great job :good::good::good:
long time no see

naheel azawy said:
great job :good::good::good:
long time no see
Click to expand...
Click to collapse
wallahi enta m4 3arf ana far7an 2d eh eny shoftk

NakedFaerie said:
Now that the Gear has moved from Android to Tizen we need a modded version to work with SDB instead of ADB.
Click to expand...
Click to collapse
the problem is that i don't have any Tizen based device , so , even if i made it support SDB i wouldn't be able to test it lol

Very useful thanks bro. And one thing I pressed thanks button on first post just kidding .
Sent from my LG-P500 using XDA Premium 4 mobile app

Good work there @Mohamed Hashem.. surely will help newbies (Y)

Mohamed Hashem said:
sorry didn't understand that .. i mean it had "install apk" option , but what do you mean with batch install apk ?
Click to expand...
Click to collapse
by batch install, he means to select multiple APKs and install them together without having to select one after another and wait for it to install.

[TOOL] SKIPSOFT ANDROID TOOLKIT - ONEPLUS 3 - Drivers, Unlock, Flash Stock, Root

ONEPLUS 3 - SUPPORTS ALL VERSIONS UP TO THE LATEST OXYGEN OS BUILD.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
The Unified Android Toolkit brings together all the Google, Nexus, OnePlus and Samsung Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check md5 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Download/sideload stock OTA image (G,N,O)
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Stock Recovery, CWM touch, Philz_touch or TWRP Touch Recovery
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser file and custom recovery images to latest versions (PRO ONLY)
* Disable forced encryption on Nexus5X,6,6P and 9
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode (G,N,O)
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google N-Nexus O-OnePlus S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: Grarak or TWRP custom recovery on OnePlus 3, ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Up' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.

**FAQ**

**VIDEOS**

I have finished all the work on the OnePlus modules for the 1, 2 and 3 devices and it is ready for testing.
You can download and test the Toolkit from the link in post#1. Please remember that this IS a test version at the moment as I do not own any OnePlus devices but I have checked all the code thoroughly and don't see any problems. I am especially pleased with the unlock/lock routines and will probably implement the code for the Nexus modules if it works well.
Everything can be checked (and please do) except downloading a stock build directly from the Toolkit as I am waiting to hear back from AndroidFileHost to see if I can get direct links to use in the Toolkit. The fastboot flash routines are working though and the Toolkit will detect the storage of the device (16GB or 64GB) and flash the relevant userdata image so you do not have to do that manually anymore.
I have used the Universal USB driver pack from CWM so if anyone has not installed OnePlus drivers yet PLEASE test if this works. I did originally include the official drivers from OnePlus but they close the Toolkit when the drivers installation starts and thats not great.
The ALLINONE routine should work fine and I have sent out some pro codes to testers to check it all works.
All builds are covered and the correct version of TWRP will be downloaded depending on the build selected. Please check everything and let me know of any bugs or textual errors (as I used a lot of the Nexus code) so I can release it publicly as soon as possible.
Thanks, Mark.

Great job, thanks a lot!!!

Dude, did a scan of your file and found this: Result: Detected: Trojan-Ransom.Win32.Cryrar.gib care to explain?

Trojan?
I hope not - seems legit.
I have 2 problems:
1)
It never asks me to authenticate the PC on the phone after installing drivers - tried both driver versions.
But the Phone serial shows up in the menu, the driver test is fine and I can backup .apks.
2)
I can not flash the OTA
Is it because it is a full stock image instead of an OTA?

gruntyoldbag said:
Trojan?
I hope not - seems legit.
I have 2 problems:
1)
It never asks me to authenticate the PC on the phone after installing drivers - tried both driver versions.
But the Phone serial shows up in the menu, the driver test is fine and I can backup .apks.
2)
I can not flash the OTA
Is it because it is a full stock image instead of an OTA?
Click to expand...
Click to collapse
Just saying, got that hit when I scanned the installer file. Might be wrong but I will not run it until dev explain why

TheErk said:
Dude, did a scan of your file and found this: Result: Detected: Trojan-Ransom.Win32.Cryrar.gib care to explain?
Click to expand...
Click to collapse
Did you read the first post of the thread?
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Click to expand...
Click to collapse
The Toolkit has been running over 4 years and there have never been any viruses in it.
Mark.

I ran this on my Nexus days, the guy is well known around, you can go with this.
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

gruntyoldbag said:
Trojan?
I hope not - seems legit.
I have 2 problems:
1)
It never asks me to authenticate the PC on the phone after installing drivers - tried both driver versions.
But the Phone serial shows up in the menu, the driver test is fine and I can backup .apks.
2)
I can not flash the OTA
Is it because it is a full stock image instead of an OTA?
Click to expand...
Click to collapse
I found the problem right away, just deleted 1 word by accident when I was renaming things.
I have made new device modules and uploaded them. Delete the ConfigOnePlus3.exe file from the Tools folder (or run ToolkitClean and select the OnePlusThree), then rerun the Toolkit and select your device to download new modules. Should work then.
Mark.

mskip said:
Did you read the first post of the thread?
The Toolkit has been running over 4 years and there have never been any viruses in it.
Mark.
Click to expand...
Click to collapse
Thought I did! Thanks for the fast reply!
---------- Post added at 11:23 AM ---------- Previous post was at 11:11 AM ----------
Impressive tool you got here! Thanks!

mskip said:
Delete the ConfigOnePlus3.exe file from the Tools folder (or run ToolkitClean and select the OnePlusThree), then rerun the Toolkit and select your device to download new modules. Should work then.
Click to expand...
Click to collapse
I cleaned the toolkit and
**************
Also I had to restart the toolkit (my own error - I didnt use the toolkit to restart, but restarted manually) and I got:
************
Tried again and Windows installed more device drivers when accepting sideload from ADB.
Didnt work the 2nd time either.
**********
BTW: drivers are installed correctly
******
Btw: I really love your tool - nice, clean, fast and a lot of HELP in the menus

gruntyoldbag said:
I cleaned the toolkit and
**************
Also I had to restart the toolkit (my own error - I didnt use the toolkit to restart, but restarted manually) and I got:
************
Tried again and Windows installed more device drivers when accepting sideload from ADB.
Didnt work the 2nd time either.
**********
BTW: drivers are installed correctly
******
Btw: I really love your tool - nice, clean, fast and a lot of HELP in the menus
Click to expand...
Click to collapse
Thanks and thank you for staying with me, I have had to change some of the procedures for the OnePlus.
Should be all fixed now. One of the procedures I had to skip set the filename for the OTA image. Have added it back in.
Clean the module files, download the new ones and retest. Hopefully it should go through.
Mark.

It is sideloading now
Reboot was successful - thx
Btw: If you want the help text to be 100% correct:
When you reboot you have to chose ENGLISH (or you can chose chinese or madarin?)
And it is called 'Install from ADB' not from USB.
Then click OK to 'Do you want to update' (not 100% sure about this text - can not remember now.
************
Just tried option 11 from the main menu:
****
Booting to stock recovery gives me the same error.

gruntyoldbag said:
It is sideloading now
Reboot was successful - thx
Btw: If you want the help text to be 100% correct:
When you reboot you have to chose ENGLISH (or chinese or whatever)
And it is called 'Install from ADB' not from USB.
Then click OK to 'Do you want to update' (not 100% sure about this text - can not remember now.
Click to expand...
Click to collapse
Thank you. I have uploaded the fixes to all the OnePlus device modules so that part at least should work for them all now.
Does the language selection come up as soon as the device boots to recovery?
I put Install from USB as thats what it said in the flashing tutorial on oneplus.net I will change it to Install from ADB/USB just to be safe for all devices.
Thanks again for the feedback. If you want to test any of the pro functions (ALLINONE) then let me know and I will send an activation code to your inbox.
Mark.

gruntyoldbag said:
It is sideloading now
Just tried option 11 from the main menu:
****
Booting to stock recovery gives me the same error.
Click to expand...
Click to collapse
Have you unlocked your bootloader? This is required before flashing/bootings images to your device.
I can capture the error when trying to boot/flash with a locked bootloader to provide more help for the user.
Mark.

The language selection come up as soon as the device boots to recovery - yes.
No I didn't unlock the bootloader - I didn't think it was necessary - help text said something about unlocking - but not that it was required.
I just wanted to backup the device - not flash anything.
Yes let me try (ALLINONE) - send me a PM thx.

gruntyoldbag said:
The language selection come up as soon as the device boots to recovery - yes.
No I didn't unlock the bootloader - I didn't think it was necessary - help text said something about unlocking - but not that it was required.
I just wanted to backup the device - not flash anything.
Yes let me try (ALLINONE) - send me a PM thx.
Click to expand...
Click to collapse
I have changed the text when booting to recovery and added extra error control when flashing or booting an image without the bootloader unlocked. New device modules uploaded.
Now sending a pm to you with a code.
Mark.

PM received - PM sent
New text and error control seems to work :good:

[ROM] Flyme OS 6 (G) Global Stable for Chinese Pro 6 Plus devices

How To Install Flyme OS 6.1.0.0G Global Stable on Chinese Pro 6 Plus devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Guide to install the Global ROM Flyme OS 6Global on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.

Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire

Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Update to a newer version:
Copy the new version to Internal storage
Open Flashfire, click on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write.
Now you will see a screen with all the actions that will be done, select the action called Reboot and un-thick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Note: In case of any problems and you want a clean installation, add the wipe action from the + button before flashing. But it should not be needed.
Note: it seems to be a problem with supersu if you don't wipe data before update. so to avoid problems, you should wipe before flash.
If you want to keep your apps and data, you should make a data (data partition only) backup from flashfire before updating. then wipe and update, follow instructions to root and to have super su. After that you can use flshfire to restore data backup (only data partition) .
also you can use kingroot but its not compatible with flashfire.
If you already updated, you can use titanium backup(give root permision from system root in settings, security root permissions)make a backup of your apps and then follow the guide below How to go back to stock chinese ROM in case of disaster, after that follow the instruction of new installation and when you have the that done, you can rstore your apps with titanium backup.
[/LIST]

First Time Installation:
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
[*]Copy the downloaded ROM to Internal storage
[*]Open Flashfire, give root permissions and click on the + button,
[*]Select Wipe and then ok
[*]Click again on the + button and choose Flash Zip / OTA
[*]Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
[*]Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
[*]Finally click on FLASH and wait until the process ends.
[*]Enjoy...

Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.

Older Versions:
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire

Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!

ShaolinMilk said:
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
Click to expand...
Click to collapse
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.

bihariel said:
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
Click to expand...
Click to collapse
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.

ShaolinMilk said:
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
Click to expand...
Click to collapse
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.

bihariel said:
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
Click to expand...
Click to collapse
Thanks dude! Looking forward to it.

im surprised at how small the response to this phone is....just stumbled upon it while looking for a new device.
this is rather off-topic but this seems to be the most active thread

thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?

@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app

mr.mgmg said:
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
Click to expand...
Click to collapse
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,

ShaolinMilk said:
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not really, the battery is surprising me on this ROM. Maybe you sould use a battery monitoring app and see whats draining it. If not, do a factory reset and see if it still prsists.

bihariel said:
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
Click to expand...
Click to collapse
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?

bihariel said:
How To Install Flyme OS 6.7.4.11 Global on Chinese Pro 6 Plus
This is a Guide to install the Global ROM Flyme OS 6.7.4.11 on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.

Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus
Copy the downloaded ROM to Internal storage
Open Flashfire, give root permissions and click on the + button,
Select Wipe and then ok
Click again on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...

Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.

Click to expand...
Click to collapse
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.

mr.mgmg said:
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
Click to expand...
Click to collapse
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:

Tony72 said:
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
Click to expand...
Click to collapse
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)

bihariel said:
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
Click to expand...
Click to collapse
Thanks a lot!, I'll read all as soon I could

BE Careful
Removed

bihariel said:
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Click to expand...
Click to collapse
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip

mr.mgmg said:
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
Click to expand...
Click to collapse
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.

bihariel said:
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
Click to expand...
Click to collapse
ealaykum alssalam
thanks bro for help
i flashed the rom without change anything in script and its work
u know when the stable rom will out?

[Le Max 3] EUI 5.9.021sR4

Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, your data , i will laugh at you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am happy to present you , the best EUI 5.9.021S experience for the Le Max 3 ( X850 ) :victory: .
Things what I changed and improved :
-> Dialer app - now supports call recording
-> Launcher ported from EUI 5.9.028S ( supports drawer mode )
-> Latest Super Manager APP , with data usage notification ( also from EUI 5.9.028S)
-> Improved system audio [ Fix v4 - [09/04/2019] - Even more boost the volume ]
-> Now the sound in headphones is as loud it can be !
( Tip: If you turn off Dolby Atmos , the speaker, earpiece, and headphones will be louder )
-> For change the behaviour of the deep sleep and battery optimization scrips ;
--> Please use LKT , and SysConfig Patcher
Install them via Magisk ( or via TWRP after Magisk is installed ) , they help to improve battery life and performance !
1. LKT - link to download : https://github.com/Magisk-Modules-Repo/legendary_kernel_tweaks
Profiles description:
Battery: Can acheive ~2 hours or more longer on-screen battery life, may lag in some scenarios where the load fluctuates dramatically.
Balanced: Can acheive ~1.5 hours or more longer on-screen battery life with little performance compromise (recommended).
Performance: Can acheive ~1 hour longer on-screen battery life , same as balanced profile with more responsiveness. Choose this profile for gaming.
Turbo: Ideal for intense high demanding tasks, where the load drastically fluctuate (not necessarily in games) . Will ensure reducing lags by ~90% for no more than ~20% increase power in consumption.
2. Sysconfig Patcher - link to download : https://forum.xda-developers.com/apps/magisk/module-sysconfig-patcher-t3668435
-> Removed many useless applications
-> Performance, RAM Management , Wi-Fi and Signal , UI responsiveness and platform Tweaks
If you encount a bug , please tell me the details in this thread .
Download Latest Update ( Скачать : ) : http://bit.ly/2uWdQcP
(The " R(Number) " means the release number of the ROM , like R4 - fourth release)
*** If you will get some errors with the LeEco Account when you are in Setup Wizard , you will just need to reboot device OR you can setup the device without the Data and Wi-Fi enabled .
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed . ( How to do that : https://forum.xda-developers.com/showpost.php?p=76620374&postcount=7 )
**After unlocking the bootloader , you get a green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : Boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do a wipe on system , data , cache .
Also please take a backup of all your files :good:
2. Download the 21S Firmware & Modem by @moto999999 : https://androidfilehost.com/?fid=674106145207488760
Note : The LTE B20 band is not working , you can NOT use the EUI6 modem or the " Super modem from EUI 5.9.020S " to get it working. The B20 will appear , but in calls you will not hear nothing , and you will not be heard by anyone
3. Download the ROM ( form the link above )
4. Boot your phone in TWRP ( from power off state , hold volume up and power button , until TWRP appears )
Now from there :
( If the TWRP is promping " Data Encrypted " then : )
--> Tick "do not show again" and the swipe to allow modification. ( if promting )
--> Skip device encryption by clicking "Install" (if the storage size is 0mb or no folder is showing while trying to install, then the device is encrypted. )
--> For solve that, click "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage (that's the purpose of device encryption, to prevent unauthorized access to the storage).
--> When completed, go back, click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. Reboot into recovery, not system).
5. Copy the ROM and the Firmware & Modem from your PC to your phone internal storage
6. Now in TWRP , tap on " Install " , and locate the Firmware_&_Modem_x10.zip and flash it.
7. After flash the ROM.
8. Now you can root with Magisk !
9. Flash LKT and Sysconfig Patcher via TWRP ( if don't work , try via Magisk Manager )
For those that want to freeze apps , a simple and bug-less list :
Note : Is not mandatory !!!
AccountInfo
AOSP keyboard* ( only if you have Gboard , or another keyboard .)
ANT HAL Service
Application for WiHD Service
Bubbles
Browser* ( if you are using another , and if you don't want the QR CODE scanner build in )
Calculator* ( if you are like me , using Mi Calculator )
EuiTransfer.AppData
CNEService
CrashHandler
EffectService
Fast Transfer
Fido... ( all 3 apps )
Following Feed
Fused Location
GallerySyncService
LeEco setup wizard
LeTVEcoProvider
Market Feedback Agent
MyLeEco
org.codeaurora.ims
Setup Wizard 2.0
VCalendar
You can use Titanium Backup ( Pro - required ) for this , or IceBox , or any other apps
Apps that I recommend : ( they are not in the ROM)
( Currently using all from this list )
1. Power Shade ( adds a new notification bar with android P style , with changed notifications and toggles for all the things. )
**Tip : Select USA region for showing apps in status bar , not an 3 dot circle
2. Add Away ( Removes adds system-wide)
3. Install button Unlocker ( Allows you to bypass the restriction "screen overlay detected" and allow the permison to apps )
4. AndroiTS GPS Test Pro ( for GPS to indentify you faster , first time after instaling the ROM )
:fingers-crossed:
Credits to:
@moto999999 for the first release of EUI 5.9.021S for TWRP.
@Luis4x4 for all his efforts , for the amount of money he spent on development of x10 ( more than 1500 $ ) , and for paying the unbricking bill of my device .
Rest of the work is done by me @diamantik
XDA:DevDB Information
EUI 5.9.021sR4 by diamantik, ROM for the LeEco Le Max 3 (X850)
Contributors
diamantik, moto999999, Luis4x4
ROM OS Version: 6.0.1 (Marshmallow)
ROM Kernel: Linux 3.18.20
ROM Firmware Required: Unlocked bootloader and a custom recovery
Based On: EUI 5.9.021S , feels like EUI 5.9.028s
Version Information
Status: Final
Current Stable Version: R4
Stable Release Date: 2019-04-09
Last Beta Version: R1_beta
Beta Release Date: 2018-08-19
Created 2018-10-21
Last Updated 2019-03-03

Note you can achive a better look by using :
1. New design Launcher ! ( I personally use "Hyperion" , you will need to freeze the default launcher )
2. A new icon pack ! ( Personally I am using " Pixel icon pack " )
This is how you can achive to make the System look like ( in case you didn't know ) :
Last three screenshots

Hello diamantik,thanks for the new ROM.
I has installed .In frist star , When it reaches the leeco account it freezes and we need to restart to finish configuring.
Once started, it looks like a 28s and it is very fluid. When you install exposed, when restarting, the error message appears in Launcher 3 and nothing is left to do.Idon't try to install other Launcher before install exposed...

Luis4x4 said:
Hello diamantik,thanks for the new ROM.
I has installed .In frist star , When it reaches the leeco account it freezes and we need to restart to finish configuring.
Once started, it looks like a 28s and it is very fluid. When you install exposed, when restarting, the error message appears in Launcher 3 and nothing is left to do.Idon't try to install other Launcher before install exposed...
Click to expand...
Click to collapse
Thanks for feedback.
I know about the problem with the LeEco Cloud app , I just need to update the archive with the LeEco Account Apps.
As for Xposed Module I really don't know what to say, have you tried another version of Xposed ?

I want the full source code of Le Max 3
I want Full source code of LE MAX 3 , Please help me regarding this. I will appreciate your help. I will be very thankfull for this.

hassaanshuja said:
I want Full source code of LE MAX 3 , Please help me regarding this. I will appreciate your help. I will be very thankfull for this.
Click to expand...
Click to collapse
We also want it
If you have money to spend, you can hire a team of devs for extracting the source code.
Currently, there is no source code available for the public.

any chance fix the stock camera portrait mode date issue?

min1968 said:
any chance fix the stock camera portrait mode date issue?
Click to expand...
Click to collapse
Have tried but no way , at least for me . You can use Google Camera for backgroud blur or any others apps

diamantik said:
We also want it
If you have more that 1500$ to spend then you can hire a team of dev , for extracting the source code, there is no source code available publicly
Click to expand...
Click to collapse
Tell me where are those developers, and what do you mean by extracting the source code, and in my information LeEco is an opensource , so why this code is not publicly available.

diamantik said:
Have tried but no way , at least for me . You can use Google Camera for backgroud blur or any others apps
Click to expand...
Click to collapse
Do you have link of Gcam apk that works on this ROM?

Hello i install this rom and call phone don't work!!
anyone can help me, please?
Thanks

min1968 said:
Do you have link of Gcam apk that works on this ROM?
Click to expand...
Click to collapse
Hi , sorry for the late response .
https://www.apkmirror.com/apk/googl...045-2821762-30-android-apk-download/download/
You can use this app ? or another if you want to search

sasiand said:
Hello i install this rom and call phone don't work!!
anyone can help me, please?
Thanks
Click to expand...
Click to collapse
What modem do you use , and how have you installed the ROM exactly ?

diamantik said:
What modem do you use , and how have you installed the ROM exactly ?
Click to expand...
Click to collapse
Frist time i install the EUI6& firmware&modem and don't work but i solve the problem reinstalling the modem 21S_Firmware_&_Modem_x10.
Now everything is fine
Thank you for the rom

sasiand said:
Frist time i install the EUI6& firmware&modem and don't work but i solve the problem reinstalling the modem 21S_Firmware_&_Modem_x10.
Now everything is fine
Thank you for the rom
Click to expand...
Click to collapse
I tried to install the eui6 firmware&modem again but it doesn't work, I reinstalled the 21sfirmware&modem and it works perfectly!
I would like to have the eui6 firmware&modem, I need the b20lte.

Does this work if I change the modem from the file for your rom.
https://drive.google.com/file/d/10mNzuvzkDQC7r782JEmRJBBQJxgCkH2f/view?usp=sharing

kavaneze said:
Does this work if I change the modem from the file for your rom.
https://drive.google.com/file/d/10mNzuvzkDQC7r782JEmRJBBQJxgCkH2f/view?usp=sharing
Click to expand...
Click to collapse
yes i think it should be fine
Keep in touch with the result please
Tell me if all is good , and band 20 is working

diamantik said:
yes i think it should be fine
Keep in touch with the result please
Hello, I tried it and the b20 works but I have the same problem, I do not listen to audio when I make a call and they do not listen to me, the microphone does not work
Can you help
B20 is very important for me
Thanks
Click to expand...
Click to collapse

Hi
hassaanshuja said:
I want Full source code of LE MAX 3 , Please help me regarding this. I will appreciate your help. I will be very thankfull for this.
Click to expand...
Click to collapse
Hello, I have been behind the source code for a while, the last time we had more luck with the unlocking of the bootloader. On this occasion I have doubled the money spent and I am still waiting for the team to give it to me.
In addition to this, I bought a new TF for other equipment that will use reverse engineering in addition to other things. This equipment does seem more reliable as well as secure payment guarantee.The sum of all the donations in the account that I opened only gave to buy the TF, 180 €. The team asks me $ 2000 for the work finished and working.

-> ROM updated to version R3 !!!
Highlights :
1. Improved performance and stability
2. Improved battery life
3. Improved the sound in headphones ! and boosted the microphone sound
4. Added the functionability of recording calls via Dialer app
( Tried very hard to make the LTE B20 to work , but always was the same problem , the recipent could not hear what I was saying , is a Modem problem , what without the sources could not be fixed )
5. Fixed the LeEco Cloud in SetupWizard

Database Users

welcome