Just saw this. Anyone try it yet? Says it works for all US carriers.
https://lifehacker.com/how-to-get-the-galaxy-s8-android-8-0-oreo-update-ahead-1821878689
https://samsung.firmware.science/
Sir_Eagle said:
Just saw this. Anyone try it yet? Says it works for all US carrie rs.
https://lifehacker.com/how-to-get-the-galaxy-s8-android-8-0-oreo-update-ahead-1821878689
Click to expand...
Click to collapse
Came here looking for the same!
Sent from my SM-G955U using Tapatalk
Damn shame I can't get it to download.
Been on Oreo for a long while. Check it out, https://forum.xda-developers.com/galaxy-s8+/how-to/guide-oreo-beta-usa-snapdragon-s8-t3700907
PLEASE read, search. Likely your question and how to get started has already been answered, happy flashing!
Not going to try. I hear it works but it's a t mobile version. I'm going to wait for official Verizon OTA as is need to reload the nougat load to get the OTA later. Besides, that wipes the phone since it isn't an upgrade.
Running oreo and work liked a charm! just following the directions.
hmltnjrmy7 said:
Running oreo and work liked a charm! just following the directions.
Click to expand...
Click to collapse
Did you have to do a full reset or run it like update?
nbock01 said:
Did you have to do a full reset or run it like update?
Click to expand...
Click to collapse
Downloaded the ZIP. Placed on my sd card. Ran recovery. Installed zip. Took under ten mins. Rebooted itself. Once rebooted it was on Oreo with no reset, everything was the same. Super easy.
hmltnjrmy7 said:
Downloaded the ZIP. Placed on my sd card. Ran recovery. Installed zip. Took under ten mins. Rebooted itself. Once rebooted it was on Oreo with no reset, everything was the same. Super easy.
Click to expand...
Click to collapse
Which firmware update did you pull then?
CRA1
ZQKS
CRA5
nbock01 said:
Which firmware update did you pull then?
CRA1
ZQKS
CRA5
Click to expand...
Click to collapse
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.
hmltnjrmy7 said:
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.
Click to expand...
Click to collapse
Got around to it this morning. Worked perfectly!
hmltnjrmy7 said:
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.
Click to expand...
Click to collapse
There's CRA9 already samsung.firmware.science BQL1 to CRA9.
xdanilva said:
There's CRA9 already samsung.firmware.science BQL1 to CRA9.
Click to expand...
Click to collapse
Is that newer?
hmltnjrmy7 said:
Is that newer?
Click to expand...
Click to collapse
Yep.
xdanilva said:
Yep.
Click to expand...
Click to collapse
Do you have any recommendations on the easiest path to this build other than Odin back then applying?
hmltnjrmy7 said:
Do you have any recommendations on the easiest path to this build other than Odin back then applying?
Click to expand...
Click to collapse
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.
xdanilva said:
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.
Click to expand...
Click to collapse
THxs! So Odin back to BQL1 but do not flash the csc (check box) in odin.. and flash zip in recovery BQL1 to CRA9.
xdanilva said:
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.
Click to expand...
Click to collapse
Worked like a charm!
Thxs
Took the gamble... on the boot up from odin back to BQL1 it corrupted my device storage.
Well crap, just got looking at my phone, looks like i had pulled the tmobile firmware file. Now pulling the full bql1 firmware for verizon from sammobile... 3.6 gb
Related
Any information on it?
For U.S.?
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
Software and stability updates, is all it said.
radpp16 said:
For U.S.?
Click to expand...
Click to collapse
I'm in US and downloaded it OTA. Installing now.
Are you able to stock root?
Updated to ART Compiler
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
I updated it last night. When it was finished updating I noticed it was optimizing apps after it restarted. I got excited and thought "Lollipop" for a second but it appears they simply changed compilers ( JIT to ART ). This is still a welcome change as the ART compiler is known to be faster and more efficient for a lot of apps. A lot of apps did install again after the update but everything was seamless, no loss of data as far as I know. Also the Android Version is still 4.4.3.
4.4.3? Shouldn't it be 4.4.2?
Gesendet mit Tapatalk
Powered by Android
I installed via odin from sammobile. Cf-autoroot works. Need to install superuser by chainfire separately. Works great.
Mine OTA update fails to install at 24%. I'm rooted with stock ROM and recovery. I even unrooted and tried it again, and the same thing happens. SamMobile doesn't have any firmware (of any version) for this tablet (SM-P600) for the USA??? Seriously?
internetpilot said:
Mine OTA update fails to install at 24%. I'm rooted with stock ROM and recovery. I even unrooted and tried it again, and the same thing happens. SamMobile doesn't have any firmware (of any version) for this tablet (SM-P600) for the USA??? Seriously?
Click to expand...
Click to collapse
They do. The region you're looking for is Cellular South (XAR)
blindmanpb said:
They do. The region you're looking for is Cellular South (XAR)
Click to expand...
Click to collapse
Thank you! I couldn't remember what the region code was. I guess I could've just looked at the current firmware to figure it out, though... Doh!
And "Cellular South" is the USA region code (expecially for a WiFi tablet) because...? Haha
Edit
Laggy
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
I've been running it for a bit and it's laggy as hell.
radpp16 said:
I installed via odin from sammobile. Cf-autoroot works. Need to install superuser by chainfire separately. Works great.
Click to expand...
Click to collapse
Weird I couldn't get root after I installed, anything special ?
louvass said:
Weird I couldn't get root after I installed, anything special ?
Click to expand...
Click to collapse
Im assuming you installed cellular south latest from sammobile. flash cf autoroot and let it do its thing. After reboot, goto playstore and download/install superuser chainfire. it asks you to disable knox,etc. Reboot and use rootchecker. I am stock rooted without custom recovery.
radpp16 said:
Im assuming you installed cellular south latest from sammobile. Then flash cf autoroot and let it do its thing. After reboot, goto playstore and download/installe superuser chainfire. it asks you to disable knox,etc. Reboot and use rootchecker. I am stock rooted without customy recovery.
Click to expand...
Click to collapse
Thanks Ill try it again
guitarabuser said:
I've been running it for a bit and it's laggy as hell.
Click to expand...
Click to collapse
I'm not noticing any lag. In fact, it seems battery life is also slightly better.
louvass said:
Thanks Ill try it again
Click to expand...
Click to collapse
Did auto root work on the new firmware
LiquidSmooth d2usc/d2vzw maintainer
Orion116 said:
Did auto root work on the new firmware
LiquidSmooth d2usc/d2vzw maintainer
Click to expand...
Click to collapse
Yes worked well I'm on newest firmware rooted
JTH182 said:
I'm not noticing any lag. In fact, it seems battery life is also slightly better.
Click to expand...
Click to collapse
Is it worth to flash this new rom??
edit: anyone running on new firmware, can I have your opinion??
louvass said:
Yes worked well I'm on newest firmware rooted
Click to expand...
Click to collapse
Thanks then I will update and then root.
LiquidSmooth d2usc/d2vzw maintainer
So nougat came out officially and I want to downgrade from the unofficial build to MM to the official N but whenever I try to odin back, I get a model mismatch fail error. I am using prince comsey odin and I've factory reset and wiped cache but nothing seems to be working. PLEASE HELP!!!!!!
RileyIssKing said:
So nougat came out officially and I want to downgrade from the unofficial build to MM to the official N but whenever I try to odin back, I get a model mismatch fail error. I am using prince comsey odin and I've factory reset and wiped cache but nothing seems to be working. PLEASE HELP!!!!!!
Click to expand...
Click to collapse
On what build are you ? If you on BQA6 you are on official Nougat firmware. You don't have to do anything. If you are on BQA4 you need to use Odin from this post : https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246 and firmware from here: https://forum.xda-developers.com/att-s7-edge/how-to/firmware-s7-edge-sm-g935a-g935aucs4apk1-t3549458
norbarb said:
On what build are you ? If you on BQA6 you are on official Nougat firmware. You don't have to do anything. If you are on BQA4 you need to use Odin from this post : https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246 and firmware from here: https://forum.xda-developers.com/att-s7-edge/how-to/firmware-s7-edge-sm-g935a-g935aucs4apk1-t3549458
Click to expand...
Click to collapse
Thank you I am on BQA4
RileyIssKing said:
Thank you I am on BQA4
Click to expand...
Click to collapse
Ok. Good luck.
norbarb said:
Ok. Good luck.
Click to expand...
Click to collapse
Do i only need the AP to downgrade? That's all I got from the zip.
RileyIssKing said:
Do i only need the AP to downgrade? That's all I got from the zip.
Click to expand...
Click to collapse
You need all 4 files from here : https://www.androidfilehost.com/?w=files&flid=150220
norbarb said:
You need all 4 files from here : https://www.androidfilehost.com/?w=files&flid=150220
Click to expand...
Click to collapse
Nvm thank you
I used regular Odin (3.12x) For returning to Stock MM. Done it twice already with no problems. I used Princes for rooting.
arrogant437 said:
I used regular Odin (3.12x) For returning to Stock MM. Done it twice already with no problems. I used Princes for rooting.
Click to expand...
Click to collapse
I vouch for this also
I just received security patch update in 60mb.
Everything running very smooth so far no issues.
"Edit" users who are curious to know that bootloader is still unlocked and i downgraded to epe3 and dok2 just fine.
Just received same update. Working great.
Sent from my SM-N910T using Tapatalk
Delete
Any chance of getting the ODIN flashable?
TopGun904 said:
Any chance of getting the ODIN flashable?
Click to expand...
Click to collapse
ODIN flashable version is up on SamMobile website. I downloaded it, flashed it, then re-installed TWRP recovery and also was able to re-root the phone after the upgrade.
TopGun904 said:
Any chance of getting the ODIN flashable?
Click to expand...
Click to collapse
You can download HERE
curgervending said:
ODIN flashable version is up on SamMobile website. I downloaded it, flashed it, then re-installed TWRP recovery and also was able to re-root the phone after the upgrade.
Click to expand...
Click to collapse
Did it trip knox?
I'm a relative noob to flashing rom's. Can someone tell me if I'm understanding this correctly?
Installing this update will *unroot* my phone? So after installing this update through odin, I will need to install twrp again while in download mode? And then, once that's installed, reroot my phone?
diggeryo said:
I'm a relative noob to flashing rom's. Can someone tell me if I'm understanding this correctly?
Installing this update will *unroot* my phone? So after installing this update through odin, I will need to install twrp again while in download mode? And then, once that's installed, reroot my phone?
Click to expand...
Click to collapse
Yes it wil unroot your device you have to flash twrp and root again.
I am getting excellent battery life with this new update no heating issues at all.
Here's the MEGA LINK:
ttps://mega.nz/#!pFNnBawI!O-k_orp7QR48f54y5aMH9uqscnjWrC3pkmIByQNEkLA
add an h before pasting
File no longer available. Can you please fix it again..
rathisarov said:
File no longer available. Can you please fix it again..
Click to expand...
Click to collapse
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
all the firmwares for our N910T are here..
You can downgrade from MM to LP by flashing this?
I've tried EPJ2 to DOK2 and it didn't work.
Dorasamu said:
You can downgrade from MM to LP by flashing this?
I've tried EPJ2 to DOK2 and it didn't work.
Click to expand...
Click to collapse
If you have N910t3 it might brick
My wife's T-Mobile note 4 just received an OTA for a security through TMobile. Thing is she's on cricket wireless, is it ok to take the update?
ryanallaire said:
My wife's T-Mobile note 4 just received an OTA for a security through TMobile. Thing is she's on cricket wireless, is it ok to take the update?
Click to expand...
Click to collapse
Should be fine to update as I got the OTA as well and I'm AT&T.
prican25 said:
Should be fine to update as I got the OTA as well and I'm AT&T.
Click to expand...
Click to collapse
Well I know cricket uses at&t so that's why I'm kinda curious about it being a TMobile update..
Does any one of a tar file of the new update? When I check for updates it says it's update to date, but I'm running PI3 and I don't have an SD card to do the update.zip method..
skater95 said:
Does any one of a tar file of the new update? When I check for updates it says it's update to date, but I'm running PI3 and I don't have an SD card to do the update.zip method..
Click to expand...
Click to collapse
There is a way to use an update.zip via adb, but I've never had to do it. Look in the Nougat beta thread. I recall someone mentioning how to do this early on in that thread. Maybe someone will chime in here.
CVertigo1 said:
There is a way to use an update.zip via adb, but I've never had to do it. Look in the Nougat beta thread. I recall someone mentioning how to do this early on in that thread. Maybe someone will chime in here.
Click to expand...
Click to collapse
I'm trying to use the PI3 to nougat zip you uploaded. Is that the OTA? I'm trying to sideload it but it says "can't read "update.zip."
That is the OTA. Did you rename it?
CVertigo1 said:
That is the OTA. Did you rename it?
Click to expand...
Click to collapse
Yes, but I redownloaded it because I said it wouldn't read so I figured it was a bad download, but it's still not working.
I've never done the ADB method, so someone else will have to chime in.
This is the link to the Odin file:
https://drive.google.com/open?id=0B7C7EaSz8kzrdjRfUDlxOFdZSmc
micallan_17 said:
This is the link to the Odin file:
https://drive.google.com/open?id=0B7C7EaSz8kzrdjRfUDlxOFdZSmc
Click to expand...
Click to collapse
Awesome! Thank you!
micallan_17 said:
This is the link to the Odin file:
https://drive.google.com/open?id=0B7C7EaSz8kzrdjRfUDlxOFdZSmc
Click to expand...
Click to collapse
After rooting nougat and jacking my phone up trying to flash different things to it, I used these files with the official Odin and restored my phone back to stock OTA nougat. Thanks for the files!!
micallan_17 said:
This is the link to the Odin file:
https://drive.google.com/open?id=0B7C7EaSz8kzrdjRfUDlxOFdZSmc
Click to expand...
Click to collapse
this is flat not edge fw correct? yes i know what forum im in lol
craazy82013 said:
this is flat not edge fw correct? yes i know what forum im in lol
Click to expand...
Click to collapse
Yes, it's for the flat version
Do I need to unroot and re-enable packages before using this method?
I don't have a Verizon SIM card. Does anyone have a update.zip or a tool so I can upgrade? When I check for updates it fails because I don't have a SIM card inside.
Tried taking the OTA but keep getting an Error 402.
I odin'd back to stock using the method on this site and even factory reset after as well.
Anyone know what the error is?
Or does anyone have an alternate way to update? I'm currently on PE1.
XxCyberHackerxX said:
I don't have a Verizon SIM card. Does anyone have a update.zip or a tool so I can upgrade? When I check for updates it fails because I don't have a SIM card inside.
Click to expand...
Click to collapse
Here is the update.zip from PI3 to Official Nougat. https://www.androidfilehost.com/?fid=745425885120713019
xRelapse13 said:
Tried taking the OTA but keep getting an Error 402.
I odin'd back to stock using the method on this site and even factory reset after as well.
Anyone know what the error is?
Or does anyone have an alternate way to update? I'm currently on PE1.
Click to expand...
Click to collapse
Use Odin or Smart Switch to upgrade to PI3, then use the update.zip I linked.
CVertigo1 said:
Here is the update.zip from PI3 to Official Nougat.
Use Odin or Smart Switch to upgrade to PI3, then use the update.zip I linked.
Click to expand...
Click to collapse
Hi, thanks for your help. The link wasn't posted. But this is the official finished OTA that was released
XxCyberHackerxX said:
Hi, thanks for your help. The link wasn't posted. But this is the official finished OTA that was released
Click to expand...
Click to collapse
You are right. I fixed it lol.
CVertigo1 said:
You are right. I fixed it lol.
Click to expand...
Click to collapse
Thank you!!