Related
I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.
Hello xda,
Since xposed framework is released unofficially for nougat, many users got force closes on random apps on PurifyOS' version.
Here is how to install it without FC:
Install xposed installer apk from this thread (only download apk and install it, don't open it): https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Download xposed for SDK 25 by BlackSoulxxx here:
https://drive.google.com/drive/mobile/folders/0B5ePoKNP9UFtWGRVN2JlazhYU2c?usp=sharing
Select Arm64 version and download.
Magisk version not working.
1: Reboot to recovery.
2: Wipe cache, davlik cache.
3: Flash xposed zip from BlackSoulxxx.
4: Reboot, enjoy.
Tested by me in ABC ROM on kenzo.
HIT THANKS IF I HELPED.
CHEERS!
Screenshots:
Tested any modules that are working? We need a list of modules that are compatible or working with it.
You using magisk or supersu?
naturist said:
Tested any modules that are working? We need a list of modules that are compatible or working with Nougat.
Click to expand...
Click to collapse
Not tested more,
Only tested apps2vr, working perfectly.
And since its new it will require time to test modules.
I am using latest magisk.
there is shown xposed is not campatible with our device
pumpkins12 said:
there is shown xposed is not campatible with our device
Click to expand...
Click to collapse
Just ignore it, it is because the app connects to official server and there is no official xposed for nougat yet.
Anyway unofficial xposed which we installed is functional and is shown active in the app.
Stable ? ;p
bartez1596 said:
Stable ? ;p
Click to expand...
Click to collapse
It is early unofficial version.
It is stable, but cannot say about modules compatibility.
sarveshrulz said:
Screenshots:
Update, magisk version: https://doc-08-3g-docs.googleuserco...828/*/0B5ePoKNP9UFtVGZHa3lDaDlEbDg?e=download
Click to expand...
Click to collapse
Guide installing magisk version getting updated process ended with error 1
[email protected] said:
Guide installing magisk version getting updated process ended with error 1
Click to expand...
Click to collapse
It is not working currently, removing it as it is only for arm and our devices are arm64
can't download xposed zip, no access. please share other link.
sarveshrulz said:
Hello xda,
Since xposed framework is released unofficially for nougat, many users got force closes on random apps on PurifyOS' version.
Here is how to install it without FC:
Install xposed installer apk from this thread (only download apk and install it, don't open it): https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Download xposed for SDK 25 by BlackSoulxxx here: https://doc-00-3g-docs.googleuserco...828/*/0B5ePoKNP9UFtaDdmYk1na1l6TEE?e=download
1: Reboot to recovery.
2: Wipe cache, davlik cache.
3: Flash xposed zip from BlackSoulxxx.
4: Reboot, enjoy.
Tested by me in ABC ROM on kenzo.
HIT THANKS IF I HELPED.
CHEERS!
Click to expand...
Click to collapse
Link not work bro....
Iyiren said:
can't download xposed zip, no access. please share other link.
Click to expand...
Click to collapse
Links updated.
Steven Lie said:
Link not work bro....
Click to expand...
Click to collapse
Updated
And don't quote entire op its against the rules of XDA
Will it pass safetynet
Didn't work on nitrogen OS. All apps fc.
Just disabled in Installer app, Rebooted and back to normal. Worth a go nothing lost
sakshamgupta2427 said:
Will it pass safetynet
Click to expand...
Click to collapse
no it will not
colemanuk said:
Didn't work on nitrogen OS. All apps fc.
Just disabled in Installer app, Rebooted and back to normal. Worth a go nothing lost
Click to expand...
Click to collapse
okay thanks for the info, maybe nitrogrn os rom doesn't supports mods correctly, all others are working
is this working on resurrection remix rom?
GrungeFactor said:
is this working on resurrection remix rom?
Click to expand...
Click to collapse
Try it, it will work afaik it doesn't works in nitrogen os
This is Xposed installation/testing thread
This is new and unofficial version- can be unstable.
I am not responsible for bricks and loosing your data! ;P
My rom chinese kangvip b225
1. First make backup of your data with twrp
2.Install xposed instaler by dvdandroid
3Flash xposed 87 sdk24 by PurifyOS. .zip file with twrp
4.Install modules, activate them then reboot
Please write what firmware you are using and what modules work on yours phones.
If something goes wrong, first try to flash uninstaller and reboot before restoring data from nandroid
Thanks to great devs for bringing xposed to our phones!
Rovo89, for making Xposed
-Abforce, for update Xposed ti Nougat
-PurifyOS Team, for make possible the build zip with source by abforce
Original thread
What does xposed do for me?
Sent from my MHA-L29 using Tapatalk
First boot is longer than usual
Youtube, camera, play store isnt crashing anymore
I not observed system slowdowns yet
Module App Settings 1.13 is working for all apps
70challenger said:
What does xposed do for me?
Sent from my MHA-L29 using Tapatalk
Click to expand...
Click to collapse
"It lets you install apps/mods/tweak with system level functionality without having to flash them via custom recovery."
Try to search xposed modules or xposed framework on google
gahu777 said:
"It lets you install apps/mods/tweak with system level functionality without having to flash them via custom recovery."
Try to search xposed modules or xposed framework on google
Click to expand...
Click to collapse
Ok, thanks for your reply.
Sent from my MHA-L29 using Tapatalk
its great news! Will wait until it become more stable, but I missed xposed a lot.
Download link?
gahu777 said:
My rom chinese kangvip b225
Click to expand...
Click to collapse
where can I download Chinese Kangvip B225?
rbt001 said:
where can I download Chinese Kangvip B225?
Click to expand...
Click to collapse
Found only link from baidu, you can downliad it from mobile, but you must open site in desktop view http://pan.baidu.com/share/link?shareid=2152760768&uk=1528889538
Or download ephemera rom https://forum.xda-developers.com/mate-9/development/ephemeral-mate-9-b213-viper-kang-tools-t3627176
Thanks but...
Found only link from baidu, you can downliad it from mobile, but you must open site in desktop view http://pan.baidu.com/share/link?shareid=2152760768&uk=1528889538
Click to expand...
Click to collapse
Thanks, I had already found this link via Google but it seems you need to create an account in order to be able to download. And to create an account you need to do verification via Chinese mobile number
Hi
I have found web page with Xposed Framework For EMUI 5.0 And EMUI 5.1 :
http://www.themefoxx.com/2017/08/xposed-framework-emui-5-0-emui-5-1.html
not tested yet but i am going to
reg
repoman728 said:
Hi
I have found web page with Xposed Framework For EMUI 5.0 And EMUI 5.1 :
http://www.themefoxx.com/2017/08/xposed-framework-emui-5-0-emui-5-1.html
not tested yet but i am going to
reg
Click to expand...
Click to collapse
I had it working, but it was a little hit and miss. It would cause a few moderate issues like when I tap an app it would try to open and then just disappear. I would have to tap the app a good 3 or 4 times to get it to actually open.
Also was about 50/50 on which modules actually worked. I really wanted gravity box most, it didn't work. GB Nougat is still highly experimental though.
Thanks for update and reply I was just about to install , it is a pity, I will have to wait more
benjmiester said:
I had it working, but it was a little hit and miss. It would cause a few moderate issues like when I tap an app it would try to open and then just disappear. I would have to tap the app a good 3 or 4 times to get it to actually open.
Also was about 50/50 on which modules actually worked. I really wanted gravity box most, it didn't work. GB Nougat is still highly experimental though.
Click to expand...
Click to collapse
Gravitybox nougat works with xposed from my topic, about 80% of settings working fine ok kangvip b225
Xposed was released for Oreo! Been so long don't know where to start.
EDIT: (I was just being dumb)
Grab the systemless version. Easiest way is through Magisk. Just make sure your on 15.2 or grab it via the link below.
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Enjoy
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
TENN3R said:
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Click to expand...
Click to collapse
I feel dumb but I don't see xposed anywhere in the modules section of the Magisk Manager app.
Is there some other way I should be finding modules? I click on the hamburger menu and then downloads and there's about 30 or so listed.
---------- Post added at 07:34 PM ---------- Previous post was at 06:48 PM ----------
Never mind. I figured out I had to be on Magisk 15.2. I was on 14.5.
So anyway I downloaded the Xposed Installer that is linked in Magisk Manager and installed it. Then I installed Xposed inside of Magisk. The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
daddylonglegs said:
... The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
Click to expand...
Click to collapse
Yes, I confirm, I don't know if it's caused by Magisk or because it's just a beta...
Anyway there is a workaround, instead of downloading the module from xposed manager, download the apk of the module from internet (official repo website or from whatever you want), because when you are going to install and enable the modules there are no problems, and after a reboot they're working.
Updated op to reflect install options. Happy modding everyone!
Success! ?
.. now for that network speed in the status bar hehe
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
KittyRgnarok said:
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
Click to expand...
Click to collapse
Did you download the modded apk as well? That's what threw me off
bush911 said:
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Click to expand...
Click to collapse
Don't know if it's supported. Of course you rebooted? I'm sure a lot of things will need slight tweaks to work on Oreo
pangolin.rollin said:
Did you download the modded apk as well? That's what threw me off
Click to expand...
Click to collapse
Yeah I did everything the same as the way you installed nougat Xposed systemlessly. Also the framework module caused a lot of choppiness on my phone so I uninstalled it anyways
Just a head's up that MinMinGuard causes my Pixel to start crashing like crazy
I have been thinking of installing this since last night, but with it still in beta and modules still needing fixed for 8.1 I just can't see any reason (other than something new for me to play with) that will benefit me enough to deal with the SafetyNet failure.
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
marsrolled said:
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
Click to expand...
Click to collapse
Not running it since it still doesn't offer a way to pass SafetyNet.
sliding_billy said:
Not running it since it still doesn't offer a way to pass SafetyNet.
Click to expand...
Click to collapse
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
marsrolled said:
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
Click to expand...
Click to collapse
I am happily enjoying the stock ROM on my XL and I keep the same installed on my wife's Pixel. I spent years swapping out custom ROMs on various devices and expected to do the same when I got the PIxels (very shortly after released almost 2 years ago). After the initial shortage of custom ROMs (due to the new OS engineering method) subsided and plenty came out, I realized there was nothing I was missing enough to deal with running custom and not being able to do a monthly update that takes me literally less than 10 minutes. Besides not missing anything, there is pretty much no bloat I need to get rid of, and the device still runs great even with a handful of "always on" apps. Probably best for you to look at the development sub-forum and do your research there and ask questions.
haven't used xposed in years. Is it still worth it with the recent android OS's?
nasedase said:
haven't used xposed in years. Is it still worth it with the recent android OS's?
Click to expand...
Click to collapse
That's like asking, "which tastes better, vanilla or chocolate?" Make a twrp backup, and give it a try, what you like, another may hate. For me, it's fun to add features when I'm using a rom that is lacking in that department.
Okay so I've been trying some treble gsi's and yesterday I installed the AICP image on my phone. I've had zero issues, magisk works, substratum works, the style option in settings works, magisk modules work, the rom is really smooth and has a lot of settings and the battery life is pretty good too :^]
Download link: https://drive.google.com/drive/folders/1LtPNR6R4dxJslXFIjpF9FhyfEfhBTCOa
List of available treble images: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Gapps: https://opengapps.org
Latest magisk: https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view
Install process is the same as with any other treble rom.
Happy flashing!
edit: typos
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
crayonicle said:
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
Click to expand...
Click to collapse
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
jetzecazemier said:
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
Click to expand...
Click to collapse
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
crayonicle said:
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
Click to expand...
Click to collapse
Most welcome!
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
jetzecazemier said:
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
Click to expand...
Click to collapse
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
See above
Wh1t3Rose said:
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
See above
Click to expand...
Click to collapse
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Possible to have a antutu screenshot?
jetzecazemier said:
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Click to expand...
Click to collapse
Sounds like root isn't install correctly? Did you check with Root Checker from play store? Which terminal program did you use? You ran su and granted root access first right?
I can't get this ROM to flash. tried both with fastboot tools and flashing the img in TWRP. I just get the Generic "Serious problems have occurred..." message
Edit: NVM I am a moron. Was flashing the AB image. :facepalm:
Bugs spotted
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
crayonicle said:
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
Click to expand...
Click to collapse
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Wh1t3Rose said:
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Click to expand...
Click to collapse
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
crayonicle said:
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
Click to expand...
Click to collapse
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Wh1t3Rose said:
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Click to expand...
Click to collapse
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
Yes. I'll try flashing again
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Wh1t3Rose said:
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Click to expand...
Click to collapse
Yes, that's right, I'm using Pico GApps 8.1 ARM64, try clearing cache of download manager, downloads, google play services, and google play store?
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!