I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.
Related
The first builds of Lineage are out for the shamu finally!
download.lineageos.org
How do I get rid of the ugly watermark across my screen?
The link to the nightly version doesn't work
Link to nightly worked fine for me. Haven't flashed yet, but it downloaded, albeit slowly.
https://download.lineageos.org/shamu
How to remove this cm to lineage migration build background ?
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
You're supposed to flash nightly over experimental. Just read the instructions...
Dopamin3 said:
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
Click to expand...
Click to collapse
can confirm - no watermark at nightly building!
Strange how everytime I try to download the nightly it fails. No matter what browser I use
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
coremania said:
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
Click to expand...
Click to collapse
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works without any trouble ...
MartinN6 said:
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works witout any trouble ...
Click to expand...
Click to collapse
Good, if it works that easy, but there was something about the cleaner, don't remember right now exactly, but it breaks something. May it was dolby.
Edit: using the cleaner always kills cast connection, that's why I didn't use it anymore
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Is there an updater built in or do we flash all updates? Reading in other threads that ppl get a update notification when a new build is available. I'm on experimental cuz the nightly link didn't work when I tried last night
Dopamin3 said:
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Click to expand...
Click to collapse
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
MartinN6 said:
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Click to expand...
Click to collapse
How did you get those SOFT keys from. Pixel
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
sorry I don´t understand what you mean with "SOFT keys" ?
Edit: Aah now I know!
Yes, it's from the mod - link next post! ->
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
https://forum.xda-developers.com/nexus-6/themes-apps/cool-pixel-mod-android-7-1-1-t3532951
Here you go
---------- Post added at 19:57 ---------- Previous post was at 19:54 ----------
LeroViten said:
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
Click to expand...
Click to collapse
Latest
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 or later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost or from below.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
vijaygogawale said:
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
Click to expand...
Click to collapse
Ok
Done Androidfilehost link is uodated
Thargorsson said:
Ok
Done Androidfilehost link is uodated
Click to expand...
Click to collapse
App installed.. but busy box not installed.. error
vijaygogawale said:
App installed.. but busy box not installed.. error
Click to expand...
Click to collapse
Which device do you have and which Android kernel, android version etc... I need Basic information.
Thargorsson said:
Which device do you have and which Android kernel, android version etc... I need Basic information.
Click to expand...
Click to collapse
Device Angler,
Kernel Stock,
Android 8 DP3,
vijaygogawale said:
Device Angler,
Kernel Stock,
Android 8 DP3,
Click to expand...
Click to collapse
Systemless root?
And which supersu
Thargorsson said:
Systemless root?
And which supersu
Click to expand...
Click to collapse
Magisk v13,
vijaygogawale said:
Magisk v13,
Click to expand...
Click to collapse
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Thargorsson said:
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Click to expand...
Click to collapse
Will try and report back
vijaygogawale said:
Will try and report back
Click to expand...
Click to collapse
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Thargorsson said:
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Click to expand...
Click to collapse
Working now, phonograph not supported.
vijaygogawale said:
Working now, phonograph not supported.
Click to expand...
Click to collapse
Cool
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
jbirdyRazr said:
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
Click to expand...
Click to collapse
Hows the exact process you wen through?
I have not implemented yet. Was wondering if anybody else had. Now using SuperSu 2.82-SR5 and TWRP 3.1.1.0. Now that TRWP works now without having to fastboot, I will try this mod. If I get it working I will let you know.
Ah k
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
snehgada said:
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
Click to expand...
Click to collapse
Which device, Rom and kernel? And also which music player are you using? Also try enabke developer options in Viper and select disable selinux and/or enable FX compatibility mode.
This is not my work i am just sharing this as many users face SafetyNet fails in many roms especially in oreo roms and practically no fix is available and we get seriously crazy as no proper fix are available because no specific reasons are seen as why it fails they are random, Same happened with me too.
This Magisk Module has been personally tested by me on omni rom, works with magisk 14.0 and above, Should also work fine in nougat as well, Test it and comment below.
Steps to install:
1)Flash this module through TWRP or magisk(i personally flashed it via TWRP, Should work fine when flashed via magisk)
2)Clear Cache/Dalvik
3) Reboot
4)It should pass SafetyNet
5)Enjoy
Tips: Before flashing this module try clearing data of play store and after following above steps and flashing, Hide root from play store and google framework before checking for SafetyNet, Just to avoid failure, This is what i did.
As this is a magisk module, You can uninstall this by deleting this module from magisk and reboot.
Here's Link to download the module
Module
All credits goes to @Deic He is the real man behind this Module, For more details and to thank him for this great module visit his thread.
Link
10 views yet no like, Strange
Hi, is this same as one posted below by @Deic or different?
https://forum.xda-developers.com/showpost.php?p=73432221&postcount=1075
mGforCe said:
Hi, is this same as one posted below by @Deic or different?
https://forum.xda-developers.com/showpost.php?p=73432221&postcount=1075
Click to expand...
Click to collapse
Thanks a ton bro, so he is the real man behind this, I'll have to change proper credits i guess.
najjurocks619 said:
Thanks a ton bro, so he is the real man behind this, I'll have to change proper credits i guess.
Click to expand...
Click to collapse
You are most welcome!
Sent from my Z2 Plus using Tapatalk
Xposed was released for Oreo! Been so long don't know where to start.
EDIT: (I was just being dumb)
Grab the systemless version. Easiest way is through Magisk. Just make sure your on 15.2 or grab it via the link below.
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Enjoy
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
TENN3R said:
I think the best method is using the systemless version for magisk, I just tried it and it works.
Simpy go into modules and you will see the sdk27 version at the very bottom: tap on it, you see there is an updated xposed manager apk made for the new magisk version.
Download the apk, install the module, reboot, install apk, reboot.
Works with no problems
Click to expand...
Click to collapse
I feel dumb but I don't see xposed anywhere in the modules section of the Magisk Manager app.
Is there some other way I should be finding modules? I click on the hamburger menu and then downloads and there's about 30 or so listed.
---------- Post added at 07:34 PM ---------- Previous post was at 06:48 PM ----------
Never mind. I figured out I had to be on Magisk 15.2. I was on 14.5.
So anyway I downloaded the Xposed Installer that is linked in Magisk Manager and installed it. Then I installed Xposed inside of Magisk. The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
daddylonglegs said:
... The only problem is the Xposed Installer crashes every time I click on a module to download. Does anyone else have this issue?
Click to expand...
Click to collapse
Yes, I confirm, I don't know if it's caused by Magisk or because it's just a beta...
Anyway there is a workaround, instead of downloading the module from xposed manager, download the apk of the module from internet (official repo website or from whatever you want), because when you are going to install and enable the modules there are no problems, and after a reboot they're working.
Updated op to reflect install options. Happy modding everyone!
Success! ?
.. now for that network speed in the status bar hehe
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
KittyRgnarok said:
Uh for some reason my downloads tab of Xposed just constantly says pull down to refresh and offers no modules
Click to expand...
Click to collapse
Did you download the modded apk as well? That's what threw me off
bush911 said:
has anyone succeeded in using xprivacy? I tried, it said xprivacy is not enabled.
Click to expand...
Click to collapse
Don't know if it's supported. Of course you rebooted? I'm sure a lot of things will need slight tweaks to work on Oreo
pangolin.rollin said:
Did you download the modded apk as well? That's what threw me off
Click to expand...
Click to collapse
Yeah I did everything the same as the way you installed nougat Xposed systemlessly. Also the framework module caused a lot of choppiness on my phone so I uninstalled it anyways
Just a head's up that MinMinGuard causes my Pixel to start crashing like crazy
I have been thinking of installing this since last night, but with it still in beta and modules still needing fixed for 8.1 I just can't see any reason (other than something new for me to play with) that will benefit me enough to deal with the SafetyNet failure.
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
marsrolled said:
How is Xposed for 8.1 now? Any updates on this? Thanks! @sliding_billy
Click to expand...
Click to collapse
Not running it since it still doesn't offer a way to pass SafetyNet.
sliding_billy said:
Not running it since it still doesn't offer a way to pass SafetyNet.
Click to expand...
Click to collapse
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
marsrolled said:
Alrighty, thanks. I got a question for you senior member, of all the roms you've tested, which has the best battery life even if compromising a little performance? Thanks. Also, any interesting things going on for our og pixel?
Click to expand...
Click to collapse
I am happily enjoying the stock ROM on my XL and I keep the same installed on my wife's Pixel. I spent years swapping out custom ROMs on various devices and expected to do the same when I got the PIxels (very shortly after released almost 2 years ago). After the initial shortage of custom ROMs (due to the new OS engineering method) subsided and plenty came out, I realized there was nothing I was missing enough to deal with running custom and not being able to do a monthly update that takes me literally less than 10 minutes. Besides not missing anything, there is pretty much no bloat I need to get rid of, and the device still runs great even with a handful of "always on" apps. Probably best for you to look at the development sub-forum and do your research there and ask questions.
haven't used xposed in years. Is it still worth it with the recent android OS's?
nasedase said:
haven't used xposed in years. Is it still worth it with the recent android OS's?
Click to expand...
Click to collapse
That's like asking, "which tastes better, vanilla or chocolate?" Make a twrp backup, and give it a try, what you like, another may hate. For me, it's fun to add features when I'm using a rom that is lacking in that department.
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
dougm1970 said:
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
U have on this site SuperDeodexedRom that isnt rooted by default: https://forum.xda-developers.com/note-4/development/rom-t3768967
... And U have also Like Stok based if U choose A5 system UI, fast and smooth:
https://forum.xda-developers.com/note-4/development/air-rom-v1-0-t3630284
And so one... Using both on both N4,,, Great roms Stock to near Stock based...
RamHa said:
U have on this site SuperDeodexedRom that isnt rooted by default: https://forum.xda-developers.com/note-4/development/rom-t3768967
... And U have also Like Stok based if U choose A5 system UI, fast and smooth:
https://forum.xda-developers.com/note-4/development/air-rom-v1-0-t3630284
And so one... Using both on both N4,,, Great roms Stock to near Stock based...
Click to expand...
Click to collapse
Air rom unfortunately you can't use some apps due to prerooted rom.
The first rom I used it but if you use any note 7 port the old ui seems outdated. I wish I could unroot someway the Air Rom which I use for daily driver but unfortunately I can't use an app that I need because it's prerooted.
ioannis_m said:
Air rom unfortunately you can't use some apps due to prerooted rom.
The first rom I used it but if you use any note 7 port the old ui seems outdated. I wish I could unroot someway the Air Rom which I use for daily driver but unfortunately I can't use an app that I need because it's prerooted.
Click to expand...
Click to collapse
Why dont U ask dev to Unroot it 4 u???? Give it a try. And as always U can unroot it by installing non rooted kernel after installing rom or inject non rooted kernel into Rom.zip. But, ask Dev, rom is great.
And, Note 7 Ports 4 me r better than s8 etc ports
RamHa said:
Why dont U ask dev to Unroot it 4 u???? Give it a try. And as always U can unroot it by installing non rooted kernel after installing rom or inject non rooted kernel into Rom.zip. But, ask Dev, rom is great.
And, Note 7 Ports 4 me r better than s8 etc ports
Click to expand...
Click to collapse
I already tried to unroot the rom with spacelemon non root version but still the app can't play at the device due to root existance. I
ioannis_m said:
I already tried to unroot the rom with spacelemon non root version but still the app can't play at the device due to root existance. I
Click to expand...
Click to collapse
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
dougm1970 said:
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
No worries for you being a newbie, but I just wanted to clarify that you can actually use restricted apps like Snapchat (created a burner account since I don't use it), Netflix, and Android Pay, etc.
Requirements:
- Lastest build from Bonuzzz (Mar.)
- Some basic knowledge on working Magisk
- Download Terminal app
- Possibly a third party file manager (ex. Solid Explorer, ES Files Explorer, etc.)
Steps:
- You need to download this and flash it in your recovery to remove pre-root from your device. https://mirrorbits.lineageos.org/su/addonsu-remove-15.1-arm-signed.zip
- Head over to the Magisk thread and download the latest version of Magisk (16.0). https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
- Flash Magisk in your recovery and and open the Magisk Manager and update it when prompted.
- Head over back to the Magisk thread and download the MagiskHide Props Config module. https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-simple-t3765199
- Open back up Magisk Manager click on the three dashes on the top left and click on the modules tab. Press the button that shows a plus sign and locate the module that you downloaded/saved on your device.
- It should then start flashing through the manager and prompt you to reboot.
- After reboot, download any terminal app (preferably Termux) and open it.
- Type in "Su" and grant it root access. Next, type "props" and it should open up onto an interface.
- Type in "1" to change your device fingerprint and type in "f" to pick a certified fingerprint.
- From here, you can choose whichever certified fingerprint your device wants to be recognized as (I used Samsung Note 5).
- After choosing your certified fingerprint, it will ask you to reboot.
- After reboot, head back into Magisk Manager and click on the SafetyNet Check (It might prompt you to download something). Eventually you should get the same test like in my picture.
- (Optional) Head back into recovery and wipe dalvik cache/cache.
Hopefully this helps out on your problem on apps not working or not letting you install them. Also, this can work for others too that don't use lineage but other Custom ROMs (AirRom, Nemesis, etc.). All you need to do is just install the latest SpaceLemon Non-rooted Kernel or manually unroot and continue with the steps on "Heading over to Magisk Threads". I do hope that this worked for others, and sorry if the instructions are either too long or really complicated on following.
RetroSpect_17 said:
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
Click to expand...
Click to collapse
True, and yes, that is solution! :highfive:
RetroSpect_17 said:
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
Click to expand...
Click to collapse
No even with non rooted kernel and magisk hide props and safetynet passes correctly the app does not start due to root existance.I don't know what else to do.
RamHa said:
True, and yes, that is solution! :highfive:
Click to expand...
Click to collapse
For me the only solution was to flash the no root stock deodexed rom you wrote above earlier today. With air rom and doing every step to pass safetynet correctly the app recognises root whatever I do.
Just saying, but please don't create a thread like this on the Android Development page again.
Quoted from the rules post: https://forum.xda-developers.com/note-4/development/rules-posting-development-t2868781
"Only the following topics are allowed in DEVELOPMENT area:
[DEV] - Development for any special projects or Apps
[ROM] - Custom ROMs
[KERNEL] - Custom Kernels (usually found in Original Development)
[MOD] - Hack & Modifications for the phone with code only, zips go in themes and apps
[FIX] - Fixes for known issues & bugs
[R&D] - Research & Development for Devs only, when gathering data for a new projects
[HOWTO] / [GUIDE] - How to instructions and Guides (Most of the time should be in General)"