2 days ago i have flashed @travis82 Nougat Rom that was working fine then i install emoji switcher application to change emoji that app was wanting root permission as soon as I tapped to grant that app message came up that your device is not Rooted, after that i checked Magisk that was saying Magisk is not installed in this device, then i reboot my C9 Pro to twrp mod to flash again Magisk Or Super Su after flashed Su i reboot my device So my mobile was stuck on Samsung C9 Pro Logo, i have waited 30 minutes to see device will start but i t was stuck, then i was coming back to my Stock rom backup so twrp was not showing backup but i was seeing that backup in my laptop, then i flashed C9000ZHU1AQG2 firmware by odin then flashed twrp then SuperSu but same i stuck on Samsung logo screen device not turned on i tried it 3 times flashed firmware/twrp/SU but same issue stuck on Samsung logo now I'm using stock C9000ZHU1AQG2 rom i want to Root again my device can anyone guide me what should i do..? I also tried to flash again @travis82 Nougat and Marshmallow Custom Rooted rom but same issue device is not turning on just stuck on Samsung C9 Pro Logo after flash ??
you format data so encryption is removed? after that install rom? should boot just fine.
travis82 said:
you format data so encryption is removed? after that install rom? should boot just fine.
Click to expand...
Click to collapse
Yes @travis82 before to flash Rom or Super Su i formated data and also swiped to factory reset then i flashed but after flashed when I'm rebooting my device so its not turning on, stuck on Samsung C9 Pro Logo screen to start device i have to flash stock firmware its a problem ?
Maibe you flashed wrong twrp
criszz said:
Maibe you flashed wrong twrp
Click to expand...
Click to collapse
After working very hard and very difficult now Thank God Super Su has Flashed in my mobile by twrp and @criszz I'm using twrp 3.1.1-0 c9ltechn which i downloaded from official twrp.me website twrp maintainer is @travis82 but now I'm getting issues in twrp sometimes format data or factory reset Failed and I'm not able to make backup And restore my Rom its always failed when i tap to make backup and restore and also installing failed sometimes but this twrp was working fine before to this problem which i described in my Post it was working fine since last 3 months but now i don't know why its getting problem with this twrp @travis82 do u know why its getting problem i have downloaded twrp from here which i was using before that time everything was working fine ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cant restore? let me see the recovery log. Maybe the emmc chip is going bad or you need to make sure odin re partitions your phone when you go back to stock.
travis82 said:
cant restore? let me see the recovery log. Maybe the emmc chip is going bad or you need to make sure odin re partitions your phone when you go back to stock.
Click to expand...
Click to collapse
I didn't tick repartition when i flashed the stock rom i just ticked f.reset and auto reboot its just a twrp problem i think @travis82 because in twrp factory reset Failed format data failed sometimes and backup always failed and restore not showing backup files i installed super su with very difficulty because also the installation option not working fine, su or custom rom dirty install
twrp 3.2 has issues dont touch it stay on 3.1
travis82 said:
twrp 3.2 has issues dont touch it stay on 3.1
Click to expand...
Click to collapse
I didn't touch 3.2 twrp and never touch till u will tell me that now touch it but also I'm seeing issues in twrp 3.1 too now what should i do which twrp should i use..? @travis82 issues which I'm getting in twrp 3.1 i described u in my thread
might be having a hardware failure than.
Related
I have a Samsung Galaxy S4 i9505 and have installed various custom roms on it. A couple of days ago I used odin to reinstall the stock rom(4.2.2) package for my phone which worked fine and I then rooted using cf auto-root here: http://forum.xda-developers.com/showthread.php?t=2219803. This also worked fine and I had root access. I tried to do an OTA update and received a message saying that I couldn't receive updates on a custom rom. So I reinstalled the custom rom without root after formatting the data and cache and didn't reroot and still received the same error message(custom rom). Since then i've tried install CWM recovery to format /system, /data, /cache, dalvik cache e.g. After this I reinstalled the stock rom and apparently it is still custom. Need help to make the status official again.
Sorry for the really long explanation :/ Please help
TrenchDigger said:
I have a Samsung Galaxy S4 i9505 and have installed various custom roms on it. A couple of days ago I used odin to reinstall the stock rom(4.2.2) package for my phone which worked fine and I then rooted using cf auto-root here: http://forum.xda-developers.com/showthread.php?t=2219803. This also worked fine and I had root access. I tried to do an OTA update and received a message saying that I couldn't receive updates on a custom rom. So I reinstalled the custom rom without root after formatting the data and cache and didn't reroot and still received the same error message(custom rom). Since then i've tried install CWM recovery to format /system, /data, /cache, dalvik cache e.g. After this I reinstalled the stock rom and apparently it is still custom. Need help to make the status official again.
Sorry for the really long explanation :/ Please help
Click to expand...
Click to collapse
Just reset the device from your device accounts / backup and reset and see it should all be official
Make sure u have all internal data backup as all will be deleted
123hiten said:
Just reset the device from your device accounts / backup and reset and see it should all be official
Make sure u have all internal data backup as all will be deleted
Click to expand...
Click to collapse
Unfortunately I have just tried that and I still have a custom status in settings and still can't get OTA updates.
TrenchDigger said:
Unfortunately I have just tried that and I still have a custom status in settings and still can't get OTA updates.
Click to expand...
Click to collapse
I have 2 options u can work on
1, Once again flash stock using Odin and Reset the device and see it should come as Official ( Some time there is bug and shows )custom
2,
Galaxy S 4 (Snapdragon)GT-I9505DBTGermanyI9505XXUEMJ5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.313.10.20131869009Unlockhttp://samsung-updates.com/details/14838/Galaxy_S_4_Snapdragon/GT-I9505/DBT/I9505XXUEMJ5.html
http://samsung-updates.com/device/?id=GT-I9505
Follow the link and flash the firmware using Odin
Ok, I managed to do it using these steps:
1.Install stock firmware(4.2.2)
2. Using cf-autoroot, root your device http://forum.xda-developers.com/showthread.php?t=2219803
3. After your device is rooted install triangle away https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway&hl=en
4. Read all of the instructions carefully and reset your status and flash count.
5. When the triangle away bootloader thing asks you to either reboot or reboot to bootloader select reboot.
6. Now factory reset your phone again from the accounts menu in the settings.
7. After that has finished you should have an official status and be able to recieve OTA's.
NOTE: When I did this process I still managed to keep the phone rooted.
This was testing on an i9505, have no idea whether this is working on other models.
Hello guys,
New CM11S OTA Released ...
XNPH25R Incremental, -- FIX : NFC & Gyroscope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I've unlocked the bootloader, instaled TWRP as recovery and rooted it, now, when the OTA message appears and I click on it, it reboot into recovery, but the updated is not performed... any idea how should I apply the update with the custom recovery?
Thanks
ICEM4N99 said:
Hi,
I've unlocked the bootloader, instaled TWRP as recovery and rooted it, now, when the OTA message appears and I click on it, it reboot into recovery, but the updated is not performed... any idea how should I apply the update with the custom recovery?
Thanks
Click to expand...
Click to collapse
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Uludag said:
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Click to expand...
Click to collapse
Take backup
1) do a full-wipe and try again..
2) do a full-wipe and install CM11S -- 22R freshly from fastboot and try... (install TWRP & root )
3) Try ota zip and flash... from
http://forum.xda-developers.com/oneplus-one/development/ota-stock-xnph25r-ota-t2804155
https://www.4shared.com/download/4UoLVwKIce/cm-bacon-XNPH25R_fix.zip?lgfp=3000
Uludag said:
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Click to expand...
Click to collapse
Not really , my opo is rooted and has TWRP , OTA was successfully installed through TWRP and the phone is still rooted
Make sure that "Update CM recovery" in developer options is unchecked and try again
king1990 said:
Not really , my opo is rooted and has TWRP , OTA was successfully installed through TWRP and the phone is still rooted
Make sure that "Update CM recovery" in developer options is unchecked and try again
Click to expand...
Click to collapse
I didn't even received my Opo, will hopefully arrive today :laugh:fingers-crossed: I just wanted to tell what I heard.
Updated it using TWRP but once booted it tells me there's an udpate, over and over... update in TWRP seems to work (no fails, only message is "radio image updated")
I'm rooted unlocked and using TWRP and it worked fine for me...
Mnt-XDA said:
Hello guys,
New CM11S OTA Released ...
XNPH25R Incremental, -- FIX : NFC & Gyroscope.
Click to expand...
Click to collapse
Apparently, that's not all:
People who have received a OnePlus One through one means or another are now receiving an over-the-air software update that addresses a charging issue affecting the device. Sometimes the phone would think it's plugged into USB when it's actually plugged into AC power and, as a result, charge only half as fast, if not slower. The handset would display Charging (USB) instead of Charging (AC).
Click to expand...
Click to collapse
Source: Android Police
Seems to TWRP has been removed after OTA update. First time it run update with TWRP but update notification still stay in tray. And after second try it disappear but together with TWRP
Works for me too. Using TWRP as Recovery. Press the OTA update then reboot into Recovery Mode automatically and process the rest upgrade command
hi guys, i have a problem istalling this ota update... in the previous version i cancelled cclock app and now when i try to update it fails do to system cant find the app. i tried also to manually istall the app without result... so i cant update!!! anyone know hot to solve without flash the firmware?
thank you!
CafeKampuchia said:
Apparently, that's not all:
Source: Android Police
Click to expand...
Click to collapse
You are right .... Charger AC/USB bug is also fixed ... I have mentioned the same on my OnePlusOne Forum Thread.. yesterday
Mnt-XDA said:
You are right .... Charger AC/USB bug is also fixed ... I have mentioned the same on my OnePlusOne Forum Thread.. yesterday
Click to expand...
Click to collapse
I haven't received the update yet
Wish I hadn't taken the "update". My phone came rooted so I thought that was the default setting. This update killed root so I had the hassle of re-rooting my new phone. Also missing a few features now.
Hi everyone,
i have a galaxy s5 the international version (sm-g900h) and i wanted to flash a custom recovery but when i flash cwm recovery and run it the recovery can't mount the partitions so i keep rebooting into recovery untill it mount the partitions properly but this is annoying i want to work with my recovery from the first run
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if i flash twrp or philaz recovery and run it the phone get stuck at the samsung logo, so is there any solution for this ??
Does anybody know the solution ?
Reinstall your original firmwere and use advanced philztouch 6.41 for kg3xx works fine form my in 900h used .tar
Try, try and try
moham_96 said:
Hi everyone,
i have a galaxy s5 the international version (sm-g900h) and i wanted to flash a custom recovery but when i flash cwm recovery and run it the recovery can't mount the partitions so i keep rebooting into recovery untill it mount the partitions properly but this is annoying i want to work with my recovery from the first run
if i flash twrp or philaz recovery and run it the phone get stuck at the samsung logo, so is there any solution for this ??
Click to expand...
Click to collapse
I have the same problem, I tried to reinstall recovery, reinstall rom, baseband, bootloader, but I always get the same result.
But it's always a hope, if you try a lot of times to enter into recovery, and if you're lucky, you will get access to partitions, for example, I have to reboot into recovery for 20 to 30 times, and I get access to partitions in 1 of that 20 or 30 attempt. In that attempt that I got access to partitions I installed a custom rom, just try a lot of times, you're going to be lucky in one, it's all that you need :good:
jah2110 said:
Reinstall your original firmwere and use advanced philztouch 6.41 for kg3xx works fine form my in 900h used .tar
Click to expand...
Click to collapse
I tried but the mounting problem didn't change at ll
frankclaros said:
I have the same problem, I tried to reinstall recovery, reinstall rom, baseband, bootloader, but I always get the same result.
But it's always a hope, if you try a lot of times to enter into recovery, and if you're lucky, you will get access to partitions, for example, I have to reboot into recovery for 20 to 30 times, and I get access to partitions in 1 of that 20 or 30 attempt. In that attempt that I got access to partitions I installed a custom rom, just try a lot of times, you're going to be lucky in one, it's all that you need :good:
Click to expand...
Click to collapse
This is what i do now but it's kinda annoying don't you think ??
moham_96 said:
This is what i do now but it's kinda annoying don't you think ??
Click to expand...
Click to collapse
Yes it is!!!
But I've read about it and I didn't find any solution
frankclaros said:
Yes it is!!!
But I've read about it and I didn't find any solution
Click to expand...
Click to collapse
so let's wait, maybe someone can help us
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Requirements
Root+Bootloader Unlocked
Flashing Instructions
After Unlocking Bootloader (If you dont know how to do it then go here)
[url]https://forum.xda-developers.com/meizu-m2-mini/how-to/guide-unlock-bootloaderinstall-twrp-t3390799[/URL]
Enter In fastboot.Then type.
"fastboot flash recovery recovery.img"
wait a minute turn off the phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Download Links
Old Recovery Version 2.8
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlMXd3YzJhTnUxeVU[/URL]
Mid Recovery 3.10 Latest
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlYnpCaXhSOUxjX0E[/URL]
New Recovery 3.1.1
[url]https://drive.google.com/file/d/0Bz6Fq2POoJTlRjh4ZkppWUJ4Qm8/view?usp=drivesdk[/URL]
Latest Recovery 3.2.1
[url]https://drive.google.com/file/d/1ftYtD2Tm0MdKBv_ZtVQHGJEcCuflb6Oe/view?usp=drivesdk[/URL]
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod
what's news bro?
ADIB27 said:
what's news bro?
Click to expand...
Click to collapse
updated with latest features of the latest recovery released by TWRP read changelogs at there TWRP site
heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.
maxisgsm said:
heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.
Click to expand...
Click to collapse
Try clear dalvik and cache.
adarshm4you said:
Try clear dalvik and cache.
Click to expand...
Click to collapse
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......
maxisgsm said:
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......
Click to expand...
Click to collapse
I think there will be some mess in installed os reflash it after taking a backup.
adarshm4you said:
I think there will be some mess in installed os reflash it after taking a backup.
Click to expand...
Click to collapse
my phone hang while i do a format storage.
maxisgsm said:
my phone hang while i do a format storage.
Click to expand...
Click to collapse
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.
adarshm4you said:
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.
Click to expand...
Click to collapse
every time the phone boot into twrp, it only go back to last state and keep fail then reboot...... it will cycle until battery die. i cannot go anywhere in twrp .....
now i at fastboot state, when i try to flash stock rom, it gave me the error
G:\adbFire>fastboot flash update update_8.zip
sending 'update' (1115283 KB)...
OKAY [ 88.153s]
writing 'update'...
FAILED (remote: partition table doesn't exist)
finished. total time: 88.237s
Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:
adarshm4you said:
Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:
Click to expand...
Click to collapse
adb cannot detect my devices ..... if i not mistake, last time i unlcock my OnePlus one without any problem, and adb can detect my phone,
now cannot detect ....
@murtaza1326
TWRP 3.2.1.0 is out!
Update the post
rushiranpise said:
@murtaza1326
TWRP 3.2.1.0 is out!
Update the post
Click to expand...
Click to collapse
post updated new latest 3.2.1 TWRP is added @Dinolek TWRP is alread there in his post so I don't think i should repost it here ??
Regards~
how to recovery install meizu m2 mini flyme 6.2.0.0g
thanks sir.. i wanna install this twrp
Pretty good!
Hi everyone, I had my phone rooted and had TWRP, Magisk fake GPS etc all up and running so I could play a certain GPS based game.
The updated game stopped working so in trying to fix it I ended up factory resetting my phone. So a couple of things, I am trying to follow a guide but I am not sure it is best suited to my current problem. TWRP app says my phone isn't rooted any longer (factory reset?) and when I try to re root the phone I get to this screen but cannot do anything except press volume down key + power key for 7 seconds to reset.
Does it look broken? How do I start all over again with a fresh root to get my phone set up again please?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As an update I can get into recovery mode and I have TWRP options and full usability here is anybody can advise what to do now please?
Tried installing magisk via TWRP, it installed but now I am stuck on the Samsung logo as the phone is trying to boot up, I really do need some guiding here
Quinn23 said:
Tried installing magisk via TWRP, it installed but now I am stuck on the Samsung logo as the phone is trying to boot up, I really do need some guiding here
Click to expand...
Click to collapse
Twrp does not detect whether your phone is rooted or not.
What guide did you follow?
Stuck at which Samsung logo ( Samsung powered by Android or Samsung with blue led light) and how long did you wait?
Being from a factory reset your phone is probably re-encrypted so you will have to format data and flash no Verity zip again.
spawnlives said:
Twrp does not detect whether your phone is rooted or not.
What guide did you follow?
Stuck at which Samsung logo ( Samsung powered by Android or Samsung with blue led light) and how long did you wait?
Being from a factory reset your phone is probably re-encrypted so you will have to format data and flash no Verity zip again.
Click to expand...
Click to collapse
This guide...
https://www.reddit.com/r/PokemonGoSpoofing/comments/9kzf4g/tutorial_spoofing_on_all_android_devices/
All worked well until yesterday when a pokemon update downloaded. So I reverted the game file back a build and it worked again.
Then today I had a notification saying there is a magisk update, in magisk manager it says ""Magisk is not installed. Latest v18.1 (18100)"". Then trying to boot into pokemon go the game will not launch as my software is incompatible.
So basically I figured I will do a phone factory reset and set it all up again with the edited guide since the updates and I am now running into errors. I have managed to since get into the phone and can get into TWRP recovery again but I cannot get magisk to instal, this is my question on reddit and where I am at currently...
Hello everyone,
I am having huge issues here. I was using the pinned guide from here method for around 6 weeks until today. I set my phone back to factory settings as I had a lot of issues. Phone is as new now but TWRP is still installed as a recovery mode available. I am on a samsung galaxy s8.
Whenever I try to install Magisk via TWRP flashing method I get "install magisk failed to mount '/data' (no such process)"
If I reset the phones file system so try EXT 2,3 etc and eventually set it back on EXT 4 then magisk installs seemingly but then my phone resets to factory and I do not see magisk anywhere once setting my phone up again.
Then if I install magisk manager it says "Magisk is not installed. Latest v18.1 (18100)"
I cannot do anymore to get set up until I get magisk going again.
Please can anybody advise?
Click to expand...
Click to collapse
Quinn23 said:
This guide...
https://www.reddit.com/r/PokemonGoSpoofing/comments/9kzf4g/tutorial_spoofing_on_all_android_devices/
All worked well until yesterday when a pokemon update downloaded. So I reverted the game file back a build and it worked again.
Then today I had a notification saying there is a magisk update, in magisk manager it says ""Magisk is not installed. Latest v18.1 (18100)"". Then trying to boot into pokemon go the game will not launch as my software is incompatible.
So basically I figured I will do a phone factory reset and set it all up again with the edited guide since the updates and I am now running into errors. I have managed to since get into the phone and can get into TWRP recovery again but I cannot get magisk to instal, this is my question on reddit and where I am at currently...
Click to expand...
Click to collapse
Can't help with pokemon as I don't play it
In regards with twrp/magisk after you factory reset your phone would have re-encrypted itself so in twrp you will have to format data reboot back into twrp flash the no Verity zip and magisk again.
Note: Once phone is up and running with root I would do a twrp backup first then try your Pokemon guide so if you run into troubles you can restore from backup.
Quinn23 said:
Tried installing magisk via TWRP, it installed but now I am stuck on the Samsung logo as the phone is trying to boot up, I really do need some guiding here
Click to expand...
Click to collapse
Format device in twrp, flash magisk, flash DM Verity zip and it will boot