Zte zmax- display goes blank after booting up - ZTE ZMAX Questions & Answers

My zmax will turn on but once it gets to the starting android apps logo it goes to a blank screen. Still lite up and it will display power off options when the power button is pressed. It just don't have no apps or icons on screen after it displays the android apps optimizing. I've soft reset, hard reset, everything and still doesn't change anything. Any one have any clue what is wrong and how to fix.????

Related

Shuts down by itself

Ok so i was wrong, it doesn't shut off, it goes past the green windows mobile screen, then past the t-mobile shadow screen, then just sits there with a black screen, the power lights are on, but just stays black forever
One other note is a hard reset isn't possible it seems because the phone cannot be turned off
If the battery is removed it shuts off of course, but when its put back in it just starts up and apparently thats not good enough to do the hard reset because it just boots up like normal to the black screen
Try pressing the hard reset keys as you place the battery in. You might need someone else to put the battery in while you press the keys. If that seems tedious or doesn't work, try starting with bootloader buttons (Camera and power button at the same time). Then connect it to your computer and run T-Mobile's update.
Hopefully, that should work.

screen stays dim and progs dont close

my phone has started to play up - if the screen dims (before it completely goes dark) if i touch the screen to "wake it up" it stays in its dim state and doesnt matter what i press it stays like this, only way is to press the power button to completely darken it and then press again to wake it up to full brightness.
And the programmes are ticked to close when the "x" is pressed as opposed to run in the background, but they dont close, they are still running.
i have checked and uncheked the feature in tweak, and soft resetted, but both problems remain, is there a fix? or a hard reset? im thinking of installing a new rom anyway

Boot problem: takes longer and hard reset screen shows up

I don't know what's happening but whenever I do a soft reset or turn the device on, the boot time takes longer and after showing the orange Window splash screen, a black screen appears with the text that says:
The device in unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.
Press Volume Up to do a hard reset...
True enough when the black screen appears and when I press the volume up, the device starts to hard reset. But despite the hard reset, the problem persists.
If I just let the black screen stand by, around a minute or so, it disappears and the device boots up and does so successfully.
Anybody has had this experience or might know what's going on? Any help/inputs are truly appreciated.

lcd not working? pitch black

So randomly, my screen stopped working. I cannot figure out what caused it.
it was fine earlier in the day, then i left my phone completely alone for a few hours, and come back to it to find the screen not working.
When i wake the screen, there is a little bar of light that flashes on the screen, it is maybe 3mm wide, and extends the width of the screen, it flashes, then disappears, and my screen remains pitch black.
is this hardware related?
the only thing I can think of software wise is that my phone is rooted, has exposed module installed, and I am running wanam and gravity box
removing the battery and putting it back in does not replace the issue. as soon as the screen awakes and tries to show anything, the orange bar flashes and disappears.
Start by seeing if you can boot to download or recovery mode. This will bypass most software related issues.
Remove your phone battery for ten seconds. Then press and continue holding keys in this order, volume down, home and lastly the power key. After about five seconds the phone should boot to the Download screen and display some system information.
If so, then try clearing your cache from recovery mode, booting to safe mode or flashing a 100% stock firmware from download mode to recover. If you can't boot to download, recovery or safe mode then it would appear that you have a hardware problem.
.

Phone wont turn on red light stays on all the time

I looked at the forums and all over google today for more than 6 hours trying to fix the phone to no avail. Basicly what happened, my phone froze after was droped and after restarting throu power button it got stuck on boot loop. So i dowloaded Huawei P9 Lite VNS-L31 model firmware and tried to instal throu SD card with volume up/down and power button option. It didnt work i got error message saying that it cant update becouse software doesnt comply with this version. And after that my phone went down. It is now completely unresponsive. Screen is black and a red light is on all the time ( not flashing ). Put it in charger no images appear. Try to press power button for 10 seconds. Red lamp dissappears for a second and comes back and no response from the phone, screen still black and no vibrations or sounds. Can access any of volume down or up power button menus. Its like the phone is dead but only the red lamp is on. Any idead whats wrong with the phone? Now i cant even try to wipe the phone or install new software couse it just doesnt despond only the red light turns off for a second when holding the power button for some time and comes on and no response from the phone.
Hey, I have the same problem. Did you manage to find the solution to it?

Categories

Resources