Hi guys, im going round the bend with my Vauxhall head unit from A-sure, the number on top starts L2OVBR.
I have seen a few posts about upgrading by sd for the S3 models of these same units, but none for my type.
I tried the S3 rom and it trys to load but i get error message about files being missing
INFO: CANT FIND MCU FILE
INFO:CANT FIND STM32VD.BIN
DVD:INFO: CANT FIND B288ROM
INFO:NAND ID EC F1 00 95 41 EC
This is the info i get when attempting to load the S3 rom. I assume the s3 and the L2 are not compatable?
What happened was while playing from usb the usb came loose and turned off, the unit then went blank.
Now when i press the reset with a pin, the car logo will give a quick flash then cut out. I have tried holding pin in for 2 min, tried combination of buttons but still the same.
Any help hould be great, If anyone could link me to the rom i need that would be great, As it does try to load the rom but i cant get the right one. A-sure dont respond to Ebay or facebook or Email.
Thanks for taking your time to read and i hope you can help me.
Regards, Charles
chicrfc said:
Hi guys, im going round the bend with my Vauxhall head unit from A-sure, the number on top starts L2OVBR.
I have seen a few posts about upgrading by sd for the S3 models of these same units, but none for my type.
I tried the S3 rom and it trys to load but i get error message about files being missing
INFO: CANT FIND MCU FILE
INFO:CANT FIND STM32VD.BIN
DVD:INFO: CANT FIND B288ROM
INFO:NAND ID EC F1 00 95 41 EC
This is the info i get when attempting to load the S3 rom. I assume the s3 and the L2 are not compatable?
What happened was while playing from usb the usb came loose and turned off, the unit then went blank.
Now when i press the reset with a pin, the car logo will give a quick flash then cut out. I have tried holding pin in for 2 min, tried combination of buttons but still the same.
Any help hould be great, If anyone could link me to the rom i need that would be great, As it does try to load the rom but i cant get the right one. A-sure dont respond to Ebay or facebook or Email.
Thanks for taking your time to read and i hope you can help me.
Regards, Charles
Click to expand...
Click to collapse
Nobody?
wince 7?
Looks like these units are loaded with Wince 7, I have emailed A-sure but no answer as of yet, im not surprised as all over the internet it is reported they aint interested, and when they do they want you to return the unit to china!
I have been looking all over the internet for the files i would need to repair the software but cant find a thing.
I downloaded a file called 117-nav-en-wince6 that was reported to help restore windows on these units but nothing with mine, just a blank screen until you press the reset button and then you would get a quick flash of the vauxhall icon and then goes black again.
Im wondering if something has fried inside the unit? but then it does try to load the wrong android files as it should, and the picture comes up when pressing reset so would imply the graphics chip is ok?
Nobody got any ideas at all?
ran 12v to the unit and canbus connection to rule out the canbus but it still does the same with the canbus box disconnected.
so def a problem with the unit. Am i alone in the forum? lol
Fixed the unit by restoring the software. I now have the software for the L2 and L4 A-sure models
just incase somebody else runs into the same problem, and gets about as much help as i did.
Least its fixed.
same problem
chicrfc said:
Fixed the unit by restoring the software. I now have the software for the L2 and L4 A-sure models
just incase somebody else runs into the same problem, and gets about as much help as i did.
Least its fixed.
Click to expand...
Click to collapse
my friend i have
Android 6.0 DVD GPS DAB+ für OPEL Astra H Antara Corsa D Vectra Zafira B Vivaro
and have the same problem,
can you help me?
thanks
hi chris where did you find the file to download have the same issue as you did
Sofia Su6-136A Dead after After trying to Update Firmware
I have android head unit which is working fine when i try to upgrade firmware with SD Card because after some time unfortunately setting has stopped error. After inserted memory card in SD Slot my unit has been died .
Unit only show brightened screen when i insert a memory card with update file in slot, unit making SLOG file on card.
Detail of Unit:
Skystar Su6-136A
1GB Ram
32GB Rom
10" full Touch
No Physical button without DVD
Related
Hello
Sorry for this but I am at wits end trying to figure out what is going on with my android head unit -
firstly it wouldn't load up at then then now I have to load it up in recovery mode to even see the screen, i attempt to install the image file which I was told to download and put on an empty micro SD card but this is what displays when i attempt to do what they describe, they try to be helpful at pumpkin but they tell me the same things over and over again, I know I'm not a developer but I'm certainly not a vegetable.
please see below for the errors i get can anyone make any sense as to why I'm getting these and how to find a fix for it?
It would be much appreciated greatly by me.
This is the link which i was told to download (news.autopumpkin.com/how-to-upgrade-your-android-head-unit-from-4-2-to-4-4-kitkat/)
(the first one I cant post links)
I have never been able to see the unit actually working so do i need to use something different rather than 'upgrade'?
Regards,
Chris E
I'd be concerned about the "Parse error" which is shown. Maybe a bad download? Have you tried downloading with a different browser?
You can also try Malyask's firmware. You need the 800x480, RK3066 version. I'd suggest the newest, from July 7th.
But, if it's never worked, maybe there's a hardware issue which installing firmware won't fix.
mike.s said:
I'd be concerned about the "Parse error" which is shown. Maybe a bad download? Have you tried downloading with a different browser?
You can also try Malyask's firmware. You need the 800x480, RK3066 version. I'd suggest the newest, from July 7th.
But, if it's never worked, maybe there's a hardware issue which installing firmware won't fix.
Click to expand...
Click to collapse
Just about to try with a different browser and different machine so hopefully that'll fix it, i will let you know in due course.
UPDATE: different browser still no luck so I will try Malyasks version
For what I see on the 2nd picture, it seems like the MCU is not getting installed. Since you already tried downloadin it on a different browser, ty using a different SD card and maybe do a checksum to compare the file on your PC and the file on the SD after you copy it. 99% of the times I've had probelms like this on phones (havent had them on the radio yet) it's been an error while copying.
UPDATE
Thank you for your help guys.
But I have discovered by it wasn't working - it was a silly error on my behalf it was fault in my wiring - I didn't think it would be anything to do with the wiring as I didn't think it would even power up if that was the case but it is if anyone else has this problem this is the cause -
The ignition wire coming from the stereo (normally red) doesn't have any power going to it.
(I wired the ignition wire to ground - thus no power going to it) :silly:
If anyone is unsure (as I was) - in a Vauxhall/Opel Corsa the wires are:
Black - Ground
Brown - Live
Good to hear you got it working and you posted the fix here in case it happens to somebody else.
Cheers!
Hi
I bought this no-name(i think?) car stereo a year ago from Aliexpress and it has worked fine until a couple of days ago.
they have made a new version, but this was the description back then:
The Newest Android7.1 8.0 Car CD DVD Player GPS Navigation For KIA RIO K3 2012-2014 Satnavi Autostereo Radio Unit Car Multimedia.
now theyve upgraded to android 9 i guess:
https://www.aliexpress.com/item/32793855865.html?spm=a2g0s.9042311.0.0.42404c4dWWKdxc
Then it suddenly stopped on the "android" boot screen. i contacted the seller and they sent me an update file.
so i place the files on the sd card and press power button while turning the key. it starts the android update screen, but quickly shows a lot of errors. Seller(autostereo) isnt much help, so i was hoping some experts in here can decipher the errors and help me out?
this is the update file they sent me:
https://wetransfer.com/downloads/22...a?spm=a2g0s.imconversation.0.0.37e83e5flyiMto
I have also been like that, having to take the time to do it many times with different types of ROM that will be different.
No one able to help?
ZUNGNN said:
I have also been like that, having to take the time to do it many times with different types of ROM that will be different.
Click to expand...
Click to collapse
did you find one that was good?
Hello ,
I would be very happy if anyone has a solution for my problem. Having spent a long time for search in this forum I even could not get an idea for a solution.
After a good first experience with a WinCE S100 I ordered a Witson PX5 RVF 4+64 for my Opel Astra J via AliExpress.
After the - very probably absolutely correct - installation a start screen was shown very briefly. Then the touch screen stayed black and still is. From Aliexpress I got only confusing information from China. a.) A rar file with an image.rar, which is used to boot from an SD-Mini-Card. b.) Videos showing a completely different approach using DriverAssistant 4.5 and Factory Tool 1.45e.
If I connect the (removed) radio to a 12 Volt laboratory power supply (ignition plus, continuous plus and ground) nothing happens. The fuse in the back is ok. But unit and display unit are dead. Even if I switch on the power with SD-Card (with the rare or the unzipped file) nothing happens. Also, if I copy the rar file to a USB stick and connect it to one of the slots in the back. Nothing flashes, no sound.
Maybe someone has a link or a hint for me where I can start. If all else fails I will send the device back. But I'd like to get it up and running. BTW: The Astra version has no buttons on the display and not even a reset button...
Thanks in advance for any advice.
macraq
macraq said:
Hello ,
I
would be very happy if anyone has a solution for my problem. Having spent a long time for search in this forum I even could not get an idea for a solution.
After a good first experience with a WinCE S100 I ordered a Witson PX5 RVF 4+64 for my Opel Astra J via AliExpress.
After the - very probably absolutely correct - installation a start screen was shown very briefly. Then the touch screen stayed black and still is. From Aliexpress I got only confusing information from China. a.) A rar file with an image.rar, which is used to boot from an SD-Mini-Card. b.) Videos showing a completely different approach using DriverAssistant 4.5 and Factory Tool 1.45e.
If I connect the (removed) radio to a 12 Volt laboratory power supply (ignition plus, continuous plus and ground) nothing happens. The fuse in the back is ok. But unit and display unit are dead. Even if I switch on the power with SD-Card (with the rare or the unzipped file) nothing happens. Also, if I copy the rar file to a USB stick and connect it to one of the slots in the back. Nothing flashes, no sound.
Maybe someone has a link or a hint for me where I can start. If all else fails I will send the device back. But I'd like to get it up and running. BTW: The Astra version has no buttons on the display and not even a reset button...
Thanks in advance for any advice.
macraq
Click to expand...
Click to collapse
Send it back, or raise a dispute before it's too late, unit is defective.
Hello,
I've got a Bosion PX6 4gb ram 64 gb rom Android Radio. https://www.aliexpress.com/item/32989458211.html this one.
For almost half a year it was working ok. Since 3 days it started to lag and working so slow. Every time screen says "Android UI is not responding", "XXX app is not reponding", "System UI is not responding" etc. I tap on the screen and response comes sometimes in 5 seconds. As same as steering wheel controls and hardware buttons. Seller sent me a firmware, I've upgraded into Android 10, it took 2 hours but nothing has changed. Still it's not useable. Few times I've tried factory reset, MCU update, firmware update and still I'm where I've started.
Their answer was:
my friend
i will send you software let you update
first update APP,（turn on the car dvd, insert the sd card or usb)
then MCU ,( turn on the car dvd, insert the sd card or usb)
this link you can download the software
https://www.dropbox.com/sh/bz0t13ispsf18z5/AABX-Wi6KWJibrirGvNZ-hL_a?dl=0
this link you can check the manul
https://mega.nz/folder/uaolDBoZ#1edP_5q80lZ36Ux8iwIYhQ
Click to expand...
Click to collapse
MCU version: STM32-20200403-11-KC6-37
Hardware version: RK3399, CPU: Dual Core Cortex-A72 @1.8G + Quad Core Cortex-A53 @1.5G
Can somebody help to overcome the problem?
Second question, how to enter the recovery mode?
Thanks in advance.
I'm also searching a way to enter recovery mode in this thing...
I'm having similar Bosion unit but with 2 knobs for Volume and functional.
I have an issue also which i cannot fix with all moves, that you did too.
My problem is that left knob is not working. Producer sent me even replace part of it, but it isn't that.
So it has to be software problem.
So i'm bumping this thread...
Hi.
Is there any way to upgrade a Bosion Android 10 car stereo with PX6 cpu and STM32 MCU?
I am attaching photos of MCU and SOFTWARE version
I have a 2004 BMW 530i and the previous owner fitted a China Android Head Unit.
My head unit just froze at the boot logo stage whenever i try to use it, i have emailed the seller and sent him a video of the problem , but he just gave me a firmware update file which didn’t work a solution to my problem,
The normal CCC menus work fine and the reversing camera works as well, so something is preventing the Android OS from starting.
I’ve seen some people here with the same issue and was able to fix their problem but the links to their fixes are expired, so i hope someone out here can help me. It’s making me nuts!!! Because i know it works
thank you in advance
Did you solve the problem? I have the same problem if you can help me ... Thank you
How can anyone know what unit it is
marchnz said:
How can anyone know what unit it is
Click to expand...
Click to collapse
this is a factory reset
now it doesn't install the update, I insert the stick and the boot doesn't start, mention that bluetouth camera pdc sensors and many others don't work ,,, at mcu I did the update. can you help me? thanks
Nobody ansver please help
aurelmo said:
Did you solve the problem? I have the same problem if you can help me ... Thank you
Click to expand...
Click to collapse
Same here. Just happened today on my BMW E90, I bought the Screen from the aliexpress seller AUTOTOP, 64GB 10 inch.
It is stuck at the BMW logo and after shows a black screen: LINK SYS 1, NO SIGNAL.
Help me please