Related
I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.
Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 or later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost or from below.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
vijaygogawale said:
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
Click to expand...
Click to collapse
Ok
Done Androidfilehost link is uodated
Thargorsson said:
Ok
Done Androidfilehost link is uodated
Click to expand...
Click to collapse
App installed.. but busy box not installed.. error
vijaygogawale said:
App installed.. but busy box not installed.. error
Click to expand...
Click to collapse
Which device do you have and which Android kernel, android version etc... I need Basic information.
Thargorsson said:
Which device do you have and which Android kernel, android version etc... I need Basic information.
Click to expand...
Click to collapse
Device Angler,
Kernel Stock,
Android 8 DP3,
vijaygogawale said:
Device Angler,
Kernel Stock,
Android 8 DP3,
Click to expand...
Click to collapse
Systemless root?
And which supersu
Thargorsson said:
Systemless root?
And which supersu
Click to expand...
Click to collapse
Magisk v13,
vijaygogawale said:
Magisk v13,
Click to expand...
Click to collapse
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Thargorsson said:
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Click to expand...
Click to collapse
Will try and report back
vijaygogawale said:
Will try and report back
Click to expand...
Click to collapse
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Thargorsson said:
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Click to expand...
Click to collapse
Working now, phonograph not supported.
vijaygogawale said:
Working now, phonograph not supported.
Click to expand...
Click to collapse
Cool
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
jbirdyRazr said:
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
Click to expand...
Click to collapse
Hows the exact process you wen through?
I have not implemented yet. Was wondering if anybody else had. Now using SuperSu 2.82-SR5 and TWRP 3.1.1.0. Now that TRWP works now without having to fastboot, I will try this mod. If I get it working I will let you know.
Ah k
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
snehgada said:
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
Click to expand...
Click to collapse
Which device, Rom and kernel? And also which music player are you using? Also try enabke developer options in Viper and select disable selinux and/or enable FX compatibility mode.
This threat will be for useful magisk modules for our great sagit. More helpful will be modules not present in magisk repo
I'm starting first:
1.Debloater v13.4 - Debloating MIUI Apps
2.Google Sans MOD Font v1 - Different Font
3.Mi 6 ALL in One Mod by Danilo v1.5 (dan3840) - Couple of mods specially for Mi6 (round corners, 1080p,120fps etc.)
4.YouTube Vanced black themed v13.18.54 - Best YouTube black (noAd) mod
1.Xposed systemless by rovo89 for Xposed framework
2.Enable camera2api by zanglang for enabling the GCam support
3.Icebox plugin for speedup the Ice box's freezing and defrosting
1. Enable camera2api (for google camera hdr+)
2.Dolby Atmos Classic (Better and louder sound)
pCloudsp said:
1.Xposed systemless by rovo89 for Xposed framework
2.Enable camera2api by zanglang for enabling the GCam support
3.Icebox plugin for speedup the Ice box's freezing and defrosting
Click to expand...
Click to collapse
Which sdk using are you for mi 6?
(When I Try install xposed, my mi 6 stuck bootloop)
Destiny97 said:
1. Enable camera2api
2.Dolby Atmos Classic
Which sdk using are you for mi 6?
(When I Try install xposed, my mi 6 stuck bootloop)
Click to expand...
Click to collapse
sdk25 xposed 89.2 systemless
disable resource hook first
pCloudsp said:
sdk25 xposed 89.2 systemless
disable resource hook first
Click to expand...
Click to collapse
How can I do that?
I found in xposed settings! Thank You!
Are you guys using Xposed on Oreo? If yes, what sdk version and settings? I get stuck on bootloop even when I disable resource hooks.
Sent from my MI 6 using Tapatalk
brwolfgang01 said:
Are you guys using Xposed on Oreo? If yes, what sdk version and settings? I get stuck on bootloop even when I disable resource hooks.
Click to expand...
Click to collapse
I use the sdk 27 90.0-beta1 i suppose beta 3 will work too but idk why i haven't updated it ?
You should disable resource hook before flashing the zip and use the compatible apk it was called xposed magisk apk easy to find
ArinAbdul said:
I use the sdk 27 90.0-beta1 i suppose beta 3 will work too but idk why i haven't updated it [emoji28]
You should disable resource hook before flashing the zip and use the compatible apk it was called xposed magisk apk easy to find
Click to expand...
Click to collapse
Oh you mean I need to flash Xposed via this app instead of Magisk?
Sent from my MI 6 using Tapatalk
brwolfgang01 said:
Oh you mean I need to flash Xposed via this app instead of Magisk?
Click to expand...
Click to collapse
No you need to install the apk then flash thr zip I flashed it in twrp do the same as mine worked fine also before booting i wiped dalvik cache
pCloudsp said:
sdk25 xposed 89.2 systemless
disable resource hook first
Click to expand...
Click to collapse
What Dobly module version are you using?
zeCosta said:
What Dobly module version are you using?
Click to expand...
Click to collapse
Is there even a difference apart from interface?
pi4a7a said:
Is there even a difference apart from interface?
Click to expand...
Click to collapse
I dont know. Im looking for a version that works on mi 6. I tryed couple ones and it didint work.
zeCosta said:
I dont know. Im looking for a version that works on mi 6. I tryed couple ones and it didint work.
Click to expand...
Click to collapse
try the classic one
zeCosta said:
What Dobly module version are you using?
Click to expand...
Click to collapse
Actually both le pro 3 and le max 2 are working. But if you want to install viper and dolby together, you will need to install old version of VIPER.
pCloudsp said:
Actually both le pro 3 and le max 2 are working. But if you want to install viper and dolby together, you will need to install old version of VIPER.
Click to expand...
Click to collapse
You can use arise so you can both have dolby and viper (yes the latest 2.5.0.5 one) plus the magisk compatibility module with the mod. Just configure install options in arise_customize.prop file then flash the zip. And you can try, add/delete other mods (included in arise) by creating other arise_customize.prop files and reflash the same zip to do it too.
I use FRONTCAM_PORTRAIT_FIX. It has officially turned my phone into a Pixel.
mahdif62 said:
I use FRONTCAM_PORTRAIT_FIX. It has officially turned my phone into a Pixel.
Click to expand...
Click to collapse
That a magisk module? Hand it over.
pi4a7a said:
That a magisk module? Hand it over.
Click to expand...
Click to collapse
Here you go: https://forum.xda-developers.com/mi-6/themes/support-gcam-hdr-mi6-t3758876/post75777225#post75777225
Anyone can tell me how can Google DNS module help us?
pi4a7a said:
Anyone can tell me how can Google DNS module help us?
Click to expand...
Click to collapse
i flashed this module today. its working ( at least for me ) but ping time become so bad about 400ms. my ping time with my internet provider is about 25ms.
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
dougm1970 said:
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
U have on this site SuperDeodexedRom that isnt rooted by default: https://forum.xda-developers.com/note-4/development/rom-t3768967
... And U have also Like Stok based if U choose A5 system UI, fast and smooth:
https://forum.xda-developers.com/note-4/development/air-rom-v1-0-t3630284
And so one... Using both on both N4,,, Great roms Stock to near Stock based...
RamHa said:
U have on this site SuperDeodexedRom that isnt rooted by default: https://forum.xda-developers.com/note-4/development/rom-t3768967
... And U have also Like Stok based if U choose A5 system UI, fast and smooth:
https://forum.xda-developers.com/note-4/development/air-rom-v1-0-t3630284
And so one... Using both on both N4,,, Great roms Stock to near Stock based...
Click to expand...
Click to collapse
Air rom unfortunately you can't use some apps due to prerooted rom.
The first rom I used it but if you use any note 7 port the old ui seems outdated. I wish I could unroot someway the Air Rom which I use for daily driver but unfortunately I can't use an app that I need because it's prerooted.
ioannis_m said:
Air rom unfortunately you can't use some apps due to prerooted rom.
The first rom I used it but if you use any note 7 port the old ui seems outdated. I wish I could unroot someway the Air Rom which I use for daily driver but unfortunately I can't use an app that I need because it's prerooted.
Click to expand...
Click to collapse
Why dont U ask dev to Unroot it 4 u???? Give it a try. And as always U can unroot it by installing non rooted kernel after installing rom or inject non rooted kernel into Rom.zip. But, ask Dev, rom is great.
And, Note 7 Ports 4 me r better than s8 etc ports
RamHa said:
Why dont U ask dev to Unroot it 4 u???? Give it a try. And as always U can unroot it by installing non rooted kernel after installing rom or inject non rooted kernel into Rom.zip. But, ask Dev, rom is great.
And, Note 7 Ports 4 me r better than s8 etc ports
Click to expand...
Click to collapse
I already tried to unroot the rom with spacelemon non root version but still the app can't play at the device due to root existance. I
ioannis_m said:
I already tried to unroot the rom with spacelemon non root version but still the app can't play at the device due to root existance. I
Click to expand...
Click to collapse
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
dougm1970 said:
newbie question this so forgive me being so niave.
i have a samsung galaxy note 4...its my old phone i have as a spare.
at one stage i had lineage os on it and it was fantastic, slick, fast, clean with superb battery life....but the lineage os for the note 4 was unofficial and was pre-rooted...which meant some apps dont work... snapchat an obvious one.
so... what are my options on roms that are stock android like...which wont be rooted and be stable ?
thanks in advance for any replies.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
No worries for you being a newbie, but I just wanted to clarify that you can actually use restricted apps like Snapchat (created a burner account since I don't use it), Netflix, and Android Pay, etc.
Requirements:
- Lastest build from Bonuzzz (Mar.)
- Some basic knowledge on working Magisk
- Download Terminal app
- Possibly a third party file manager (ex. Solid Explorer, ES Files Explorer, etc.)
Steps:
- You need to download this and flash it in your recovery to remove pre-root from your device. https://mirrorbits.lineageos.org/su/addonsu-remove-15.1-arm-signed.zip
- Head over to the Magisk thread and download the latest version of Magisk (16.0). https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
- Flash Magisk in your recovery and and open the Magisk Manager and update it when prompted.
- Head over back to the Magisk thread and download the MagiskHide Props Config module. https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-simple-t3765199
- Open back up Magisk Manager click on the three dashes on the top left and click on the modules tab. Press the button that shows a plus sign and locate the module that you downloaded/saved on your device.
- It should then start flashing through the manager and prompt you to reboot.
- After reboot, download any terminal app (preferably Termux) and open it.
- Type in "Su" and grant it root access. Next, type "props" and it should open up onto an interface.
- Type in "1" to change your device fingerprint and type in "f" to pick a certified fingerprint.
- From here, you can choose whichever certified fingerprint your device wants to be recognized as (I used Samsung Note 5).
- After choosing your certified fingerprint, it will ask you to reboot.
- After reboot, head back into Magisk Manager and click on the SafetyNet Check (It might prompt you to download something). Eventually you should get the same test like in my picture.
- (Optional) Head back into recovery and wipe dalvik cache/cache.
Hopefully this helps out on your problem on apps not working or not letting you install them. Also, this can work for others too that don't use lineage but other Custom ROMs (AirRom, Nemesis, etc.). All you need to do is just install the latest SpaceLemon Non-rooted Kernel or manually unroot and continue with the steps on "Heading over to Magisk Threads". I do hope that this worked for others, and sorry if the instructions are either too long or really complicated on following.
RetroSpect_17 said:
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
Click to expand...
Click to collapse
True, and yes, that is solution! :highfive:
RetroSpect_17 said:
When you are saying some apps are you talking about safetynet getting tripped? Why not just flash Spacelemon non-rooted and flash latest magisk with prop hide module to get it to work. I was able to pass safetynet with the latest version of AirRom at the time.
Click to expand...
Click to collapse
No even with non rooted kernel and magisk hide props and safetynet passes correctly the app does not start due to root existance.I don't know what else to do.
RamHa said:
True, and yes, that is solution! :highfive:
Click to expand...
Click to collapse
For me the only solution was to flash the no root stock deodexed rom you wrote above earlier today. With air rom and doing every step to pass safetynet correctly the app recognises root whatever I do.
Just saying, but please don't create a thread like this on the Android Development page again.
Quoted from the rules post: https://forum.xda-developers.com/note-4/development/rules-posting-development-t2868781
"Only the following topics are allowed in DEVELOPMENT area:
[DEV] - Development for any special projects or Apps
[ROM] - Custom ROMs
[KERNEL] - Custom Kernels (usually found in Original Development)
[MOD] - Hack & Modifications for the phone with code only, zips go in themes and apps
[FIX] - Fixes for known issues & bugs
[R&D] - Research & Development for Devs only, when gathering data for a new projects
[HOWTO] / [GUIDE] - How to instructions and Guides (Most of the time should be in General)"
3Minit Battery work perfectly, thx for support and help
Only for One UI 2.0 (no work One UI 2.1 !!!)
Tested for Samsung Galaxy Note 9 SM-N960F Exynos, with root with Magisk 20.3, stock ROM, Android 10, N960FXXS4DTA5 Germany DBT
How work?
01. Open Magisk First and flash this in magisk manager: InstallMinitBatteryResourcesApk.zip
https://mega.nz/#!TYpUkKLS!8hPAlHijupl4B4IglyxnkmsmYwWqy40fRHskGxCDUKg
02. Reboot phone when asked.
03. With a root explorer app, makes sure minitbatteryresources.apk is installed to
system/app. It should be at the bottom as it will not be in a folder.
04. Open Magisk again and flash this in magisk manager: 3Minit.zip
https://mega.nz/#!PYpGmQQQ!EKYo1H7bZF7Vjf1j5tCnLV-T6uDXgRulLQmTsIlpFv4
05. Reboot phone when asked.
06. Install 3MinitBatterySettings.apk
www.mediafire.com/download/a32g43vgwtdzzgc/3MinitBatterySettings.apk
07. Open 3Minit Battery Settings and download favourite icon for battery!!!
• Credits :
• Special thanks to @Tulsadiver
• Thanks to @topjohnwu for Magisk
• Thanks to @gharrington for 3Minit Battery
• Thanks for all developpers here and elsewhere who released their sources
Does this also work with Good Lock QuickStar?
Sent from my SM-N960F using XDA Labs
Yes, work with NiceLock (GoodLock work with Asia no Europe)!
3minit clock
would you please add 3monit clock, thanks in advance
Detonatte said:
3Minit Battery work perfectly, thx for support and help
Tested for Samsung Galaxy Note 9 SM-N960F Exynos, with root with Magisk 20.3, stock ROM, Android 10, N960FXXS4DTA5 Germany DBT
How work?
01. Open Magisk First and flash this in magisk manager: InstallMinitBatteryResourcesApk.zip
https://mega.nz/#!TYpUkKLS!8hPAlHijupl4B4IglyxnkmsmYwWqy40fRHskGxCDUKg
02. Reboot phone when asked.
03. With a root explorer app, makes sure minitbatteryresources.apk is installed to
system/app. It should be at the bottom as it will not be in a folder.
04. Open Magisk again and flash this in magisk manager: 3Minit.zip
https://mega.nz/#!PYpGmQQQ!EKYo1H7bZF7Vjf1j5tCnLV-T6uDXgRulLQmTsIlpFv4
05. Reboot phone when asked.
06. Install 3MinitBatterySettings.apk
www.mediafire.com/download/a32g43vgwtdzzgc/3MinitBatterySettings.apk
07. Open 3Minit Battery Settings and download favourite icon for battery!!!
• Credits :
• Special thanks to @Tulsadiver
• Thanks to @topjohnwu for Magisk
• Thanks to @gharrington for 3Minit Battery
• Thanks for all developpers here and elsewhere who released their sources
Click to expand...
Click to collapse
hey man, i'm doing a Magisk rom for N976B and wondered if it would be ok to use this in my rom?
Backup first, then can you try.
Detonatte said:
Backup first, then can you try.
Click to expand...
Click to collapse
cool thanks man, if this works ill link thread and give credits to you and the other devs
exocetdj said:
cool thanks man, if this works ill link thread and give credits to you and the other devs
Click to expand...
Click to collapse
So did it work for you?
mixlex said:
So did it work for you?
Click to expand...
Click to collapse
I haven't got round to trying yet. Hopefully later and I'll report back
It works but the app keep saying out of date. Please install the new version
Not working for me on one plus 6 and magisk 20.3. the modules are showing installed in magisk. 10.3.2
This tutorial it's for Samsung. Tested for Samsung Galaxy Note 9 no On plus, because it modifies two files in the system and Samsung has two different files compared to On plus.
Tried this on S9 on Android 10. After flashing the 2nd zip, it screwed the systemUI and screen just black
Deleted
Working perfectly, thanks for sharing.
Note 9 running the latest DevBase.
Works well on note 9 running Alexis 1.3.1 rom
Thank you
Anyone know why the online menus dont show sometimes??
This method does not work with one ui 2.1
tabish84 said:
This method does not work with one ui 2.1
Click to expand...
Click to collapse
Giving me boot loop as well. But I am on a custom rom
Techvir said:
Giving me boot loop as well. But I am on a custom rom
Click to expand...
Click to collapse
Flash drketan of u want oneui 2.1 and 3minit