Found a way to reboot to edl mode from fastboot
All credits to @emuzychenko
1) Download modified fastboot file
2) Reboot your phone to fastboot
3) Double click on edl.cmd
4) You are on 9008/edl mode
5) Flash any fastboot image from Mi flash
You successfully unbricked your device
Hi
Try with that method also. It seams to work .
Next time I brick it again (trust me, it will happen) I will give those a try.
This is the solution www(dot)htcmania.com(/)showthread(dot)php?t=1163463
Cheked by me, the brick was to try to unlock the bootloader without the Xiaomi message.
Sorry for my english, bu ti hope to be helpful.
To restore the default Bootloader copy paste the emmc_appsboot.mbn from Fastboot Rom to the Adb foldee
and type command on cmd
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
parfetto said:
Hi
Try with that method also. It seams to work .
Click to expand...
Click to collapse
this method only works for few very people, everyone cant access adb through recovery.
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
IT WORKS
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Worked like a magic. I can confirm for sure. Was stuck at HS USB 900E with locked bootloader.
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Dharani_V said:
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Click to expand...
Click to collapse
So, did you try above mentioned method?
amsmu said:
So, did you try above mentioned method?
Click to expand...
Click to collapse
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
failed bro, getting error device is locked using QFIL.:crying:
Guys, please mention the reason behind your device getting bricked too when you are reporting what worked and what didn't. Like whether during unlock bootloader process(without xiaomi's permission) or flashing custom ROM(most probably MIUI official updates) via twrp.
Dharani_V said:
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
Click to expand...
Click to collapse
What were you doing when it bricked?
Go to service center. They will repair it
mine happened same..... hard bricked my mobile after restoring original bootloader.......
QFIL cannot do a thing ..... all the eror i get is unable to go to EDl mode......
nothing for me except download mode and fastboot......
so toook to service centre and got it repaired for free in 2hrs
puli where do u live[emoji14]
Sent from my Redmi Note 3 using XDA-Developers mobile app
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Rajdip said:
I have found few ways by which people may unbrick from HS USB 900E state without test point, but those guides are for other devices, needs thorough testing for Redmi note 3.
Tools needed:-
1) QPST http://www.androidbrick.com/downloa...qcn-for-lollipop-android-5-0-6-0-marshmallow/
2)Nubia tool studio https://drive.google.com/folderview?id=0BwtoIMKf470SRUxfdHA5cU14ZTQ#
Now follow these guides for reference,
1)http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
2)http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Only people with hardbrick(900E) and locked bootloader can this test methods, Please try and leave your feedback, maybe we will find a way to unbrick without opening the phone and voiding warranty. Good Luck
Click to expand...
Click to collapse
Does anyone success ? Please share a guide !
apixbuanget said:
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Click to expand...
Click to collapse
wow!!! thats great, but before you flashed aboot through fastboot did you check whether your bootloader was locked or not?
Hello.
Long story short:
I have a OnePlus2, I can boot in Fastboot mode and my PC does recignize the fastboot device.
fastboot oem device-info says that Bootloader is locked and when I try to unlock (fastboot oem unlock) it states "okay" but cannot boot into system because there is none installed. -> Bootloop
I cannot boot into recovery nor install a recovery due to the locked bootloader.
My Question:
Is there a way to unlock the bootloader in fastboot and/or install a boot.img?
I am happy for any help that I get.
Have a good day/night
SoulSnatcher
No, but why you don't have system?
You have stock recovery download official signed full zip and flash it. Recovery.
Also unbrick guide using the one you need Qualcomm drivers
Sent from my ONE A2005 using Tapatalk
I came back from LOS 16.0. Flashed A2017G_B10_NOUGAT_FULL_EDL in EDL but there's a warning that my bootloader is locked. I wanted to relock it but the warning prevents me from entering bootloader or fastboot (or maybe they are not even present....). Next I flashed A2017U_FASTBOOT_UNLOCK_EDL in MiFlash but it did not do anything. It flashed OK but I still cannot access fastboot. Should I flash some marshmallow rom? Thanks in advance.
I have the same problem. Cannot enter fastboot mode on Nougat ROM.
Ok I found the way usin Axon 7 Toolkit
1. Set the Android version to 7 using option 13
2. Perform unlock bootloader
Following instruction Axon & Tookit gives you EDL image of the proper fastboot partition giving the possibility to enter fastboot mode
then fasboot oem lock
I wanted to say thanks that works, but apparently my phone is bricked now - it hangs on green ZTE logo. PC recognizes it as DFU. Cannot enter EDL either. I guess I look for some guide how to recover from this situation
Managed to fix that. Somehow I was able to enter fastboot. It said my bootloader was locked so i flashed TWRP and from TWRP using ADB installed stock Nougat rom
ma_ko said:
I wanted to say thanks that works, but apparently my phone is bricked now - it hangs on green ZTE logo. PC recognizes it as DFU. Cannot enter EDL either. I guess I look for some guide how to recover from this situation
Managed to fix that. Somehow I was able to enter fastboot. It said my bootloader was locked so i flashed TWRP and from TWRP using ADB installed stock Nougat rom
Click to expand...
Click to collapse
If you was able flash twrp mens your boolaeder was unlocked?
No there's a TWRP that works on locked bootloader.
ma_ko said:
No there's a TWRP that works on locked bootloader.
Click to expand...
Click to collapse
Seems that TWRP was inatlled before the bootloder was locked again.
I have a A2017U that I just downgraded to B35 using this guide: https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
I want to lock the bootloader to stop the annoying boot warning but can't get into fastboot when using AXON7TOOLKIT.
I tried flashing A2017U_FASTBOOT_UNLOCK_EDL (downloaded from https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128) through miFlash but I still can't get into the bootloader.
What can I do?
EDIT: Thanks everyone! I used the toolkit to unlock the bootloader again, then locked it. For some reason I couldn't access the bootloader even though i got the bootloader ulocked warning.
mateokross said:
I have a A2017U that I just downgraded to B35 using this guide: https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
I want to lock the bootloader to stop the annoying boot warning but can't get into fastboot when using AXON7TOOLKIT.
I tried flashing A2017U_FASTBOOT_UNLOCK_EDL (downloaded from https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128) through miFlash but I still can't get into the bootloader.
What can I do?
Click to expand...
Click to collapse
You only want to lock it because of the boot warning? There are flashables to get rid of that... I dom't know which exact files there are for stock B35 or Oreo but there are some going around.
hell you could even go custom and use the splash bootstack if you wanted.
If you want to lock anyways, you have to get an A2017U B19 package and flash it via EDL Tool (or MiFlash). Right after that you'll have fastboot. enable oem unlocking then enter fastboot and issue fastboot oem lock and you're done. But it's way too overkill if you want to just get rid of the 5 sec screen
mateokross said:
I have a A2017U that I just downgraded to B35 using this guide: https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
I want to lock the bootloader to stop the annoying boot warning but can't get into fastboot when using AXON7TOOLKIT.
I tried flashing A2017U_FASTBOOT_UNLOCK_EDL (downloaded from https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128) through miFlash but I still can't get into the bootloader.
What can I do?
Click to expand...
Click to collapse
you need to flash original stock rom for your device trough edl. (rom your device came from factory,marshmallow)
then boot into system,unlock developer options.Allow oem unlock and turn on usb debugging.Now connect phone to laptop and check the dialogue on your phone that ask for usb debug.Unplug phone.
When you did this you want to flash TWRP trough EDL.
Now boot in TWRP and flash UnlockbootloaderPackage from DrakenFX.
Reboot system.
Now turn off your device and boot into fastboot,connect your phone with laptop and open ADB terminal on your laptop or use Axon7toolkit.
In terminal enter fastboot oem lock,or in axon7toolkit choose lock bootloader.
Your bootloader is now locked.
PS: you dont need locked bootloader to recieve ota's,and make sure you are on the firmware your device came shipped with!!
You need a locked bootloader to get rid of the warning message ( dont flash any mod package that claims it delete the warning page)
Hi everyone,
I am the owner of an A2017G, unlocked bootloader.
I tried them all, but all of them and I can't get into fastboot / bootloader mode.
Ihave flash rom via MIFLASH and AXON7 EDL TOOL using rom Nougat and Oreo, but the result is always the same !!!
Do you have any ideas to help me, perpetuate?
Thank you.
Use miflash and flash unlock bootloader image by Turkdev, even in oreo it will give you fastboot menu.
I did this 3 days ago to relock my bootloader
Use this tutorial:
https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595
The reason you lose your fastboot menu because you unlock BL with another image (using Axon 7 EDL tool perhaps), but if you do unlock with turkdev image in tutorial, your fastboot menu will stay there
YoungAll said:
Use miflash and flash unlock bootloader image by Turkdev, even in oreo it will give you fastboot menu.
I did this 3 days ago to relock my bootloader
Use this tutorial:
https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595
The reason you lose your fastboot menu because you unlock BL with another image (using Axon 7 EDL tool perhaps), but if you do unlock with turkdev image in tutorial, your fastboot menu will stay there
Click to expand...
Click to collapse
Thank you very much, YoungAll.
You were really very kind and extremely helpful.
In the coming days I will try the guide you posted to me.
Until next time :good::fingers-crossed: