Found a way to reboot to edl mode from fastboot
All credits to @emuzychenko
1) Download modified fastboot file
2) Reboot your phone to fastboot
3) Double click on edl.cmd
4) You are on 9008/edl mode
5) Flash any fastboot image from Mi flash
You successfully unbricked your device
Hi
Try with that method also. It seams to work .
Next time I brick it again (trust me, it will happen) I will give those a try.
This is the solution www(dot)htcmania.com(/)showthread(dot)php?t=1163463
Cheked by me, the brick was to try to unlock the bootloader without the Xiaomi message.
Sorry for my english, bu ti hope to be helpful.
To restore the default Bootloader copy paste the emmc_appsboot.mbn from Fastboot Rom to the Adb foldee
and type command on cmd
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
parfetto said:
Hi
Try with that method also. It seams to work .
Click to expand...
Click to collapse
this method only works for few very people, everyone cant access adb through recovery.
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
IT WORKS
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Worked like a magic. I can confirm for sure. Was stuck at HS USB 900E with locked bootloader.
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Dharani_V said:
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Click to expand...
Click to collapse
So, did you try above mentioned method?
amsmu said:
So, did you try above mentioned method?
Click to expand...
Click to collapse
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
failed bro, getting error device is locked using QFIL.:crying:
Guys, please mention the reason behind your device getting bricked too when you are reporting what worked and what didn't. Like whether during unlock bootloader process(without xiaomi's permission) or flashing custom ROM(most probably MIUI official updates) via twrp.
Dharani_V said:
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
Click to expand...
Click to collapse
What were you doing when it bricked?
Go to service center. They will repair it
mine happened same..... hard bricked my mobile after restoring original bootloader.......
QFIL cannot do a thing ..... all the eror i get is unable to go to EDl mode......
nothing for me except download mode and fastboot......
so toook to service centre and got it repaired for free in 2hrs
puli where do u live[emoji14]
Sent from my Redmi Note 3 using XDA-Developers mobile app
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Rajdip said:
I have found few ways by which people may unbrick from HS USB 900E state without test point, but those guides are for other devices, needs thorough testing for Redmi note 3.
Tools needed:-
1) QPST http://www.androidbrick.com/downloa...qcn-for-lollipop-android-5-0-6-0-marshmallow/
2)Nubia tool studio https://drive.google.com/folderview?id=0BwtoIMKf470SRUxfdHA5cU14ZTQ#
Now follow these guides for reference,
1)http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
2)http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Only people with hardbrick(900E) and locked bootloader can this test methods, Please try and leave your feedback, maybe we will find a way to unbrick without opening the phone and voiding warranty. Good Luck
Click to expand...
Click to collapse
Does anyone success ? Please share a guide !
apixbuanget said:
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Click to expand...
Click to collapse
wow!!! thats great, but before you flashed aboot through fastboot did you check whether your bootloader was locked or not?
Related
Is this real ? i really cant access boot loader , just the recovery with the no command screen
can you confirm ??
if so then what i think that this device is already dead
It has a fasboot mode, for now I can only access it via adb (adb reboot bootloader). It shows a black screen with fastboot mode at the bottom.
It also has a stock recovery mode, shows 'no command' but can be activated by pressing power button.
After you've activated it:
Vol+ to select
Vol- navigate down
Power to go back
Adb No devices found , idk why my Laptop doesn't detect my desire 820s
wil try now just installed htc sync manager
okay it worked and i went to fastboot mode , when i give a cmd order it says waiting for device
eg..... fastboot oem info
Same here
fastboot oem unlock
FAILED (remote: unknown command)
fastboot oem get_identifier_token
FAILED (remote: unknown command)
any idea ?
Nc.netcat said:
Same here
fastboot oem unlock
FAILED (remote: unknown command)
fastboot oem get_identifier_token
FAILED (remote: unknown command)
any idea ?
Click to expand...
Click to collapse
Mediatek Htc devices do not need bootloader unlocking, you can flash anything from fastboot mode
---------- Post added at 04:16 PM ---------- Previous post was at 04:10 PM ----------
Mohamed Yaser said:
Is this real ? i really cant access boot loader , just the recovery with the no command screen
can you confirm ??
if so then what i think that this device is already dead
Click to expand...
Click to collapse
You are right, Mediatek HTC devices dont have bootloader. Infact mediatek htc phones can be flashed with SP Flash tool just like micromax phones. I know this is true for htc 816g.
sziraqui said:
Mediatek Htc devices do not need bootloader unlocking, you can flash anything from fastboot mode
.
Click to expand...
Click to collapse
hhmm
fastboot flash recovery recovery.img => partition 'recovery' not support flash
but flashing recovery with SP flash tool will work for sure.
1. Put your custom recovery in the firmware folder,
2. del stock recovery.img,
3. rename your custom recovery as recovery.img,
4. load scatter file,
5. uncheck everything except recovery
6. click download and then connect your powered off phone to pc while holding vol down
someone Please confirm if this works with 820s, without worrying about bootloader
sziraqui said:
but flashing recovery with SP flash tool will work for sure.
1. Put your custom recovery in the firmware folder,
2. del stock recovery.img,
3. rename your custom recovery as recovery.img,
4. load scatter file,
5. uncheck everything except recovery
6. click download and then connect your powered off phone to pc while holding vol down
someone Please confirm if this works with 820s, without worrying about bootloader
Click to expand...
Click to collapse
It works. How about flashing a RUU?
Gibz97 said:
It works. How about flashing a RUU?
Click to expand...
Click to collapse
Can mention on which device you have checked it, does it has locked bootloder (if exists)?
RUU in mediatek? i dont think mediatek phones have RUU, (try "fastboot oem rebootRUU" to check)
But if it does, you can extract rom.zip from the RUU THEN EXTRACT system.img, boot.img and recovery.img
Then keep copy this to your firmware folder (containg scatter file)
load scatter file
Uncheck everything except system,boot and recovery in sp flash tool
Click download and connect your powered off device to pc holding vol down
sziraqui said:
Can mention on which device you have checked it, does it has locked bootloder (if exists)?
RUU in mediatek? i dont think mediatek phones have RUU, (try "fastboot oem rebootRUU" to check)
But if it does, you can extract rom.zip from the RUU THEN EXTRACT system.img, boot.img and recovery.img
Then keep copy this to your firmware folder (containg scatter file)
load scatter file
Uncheck everything except system,boot and recovery in sp flash tool
Click download and connect your powered off device to pc holding vol down
Click to expand...
Click to collapse
I've done that but the phone usually cannot boot into the system.
BTW I am on Kitkat 4.4.4 without Sense and I want to flash Lollipop 5.0.2 Sense 7.
The RUU is from a Taiwanese variant 820ys which runs Lollipop 5.0.2 and Sense 7 out of the box, same models(htc_a50ml_dtul)
The problem is that the Kitkat Firmware has smaller partitions compared to the lollipop one. An example is the Kitkat system partition which is about 1.4Gbs while Lollipop has about 4.9Gbs, so I cannot flash with the same scatter file.
So I edit the scatter file to inflate the partitions in order to accommodate the big Lollipop files (sytem.img,recovery.img and boot.img) and perform firmware upgrade.
What could be stopping it from booting? Is it due the fact that the Lollipop boot and recovery are verified? Thanks in advance
Screenshots for Kitkat and Lollipop firmware files below
Gibz97 said:
I've done that but the phone usually cannot boot into the system.
BTW I am on Kitkat 4.4.4 without Sense and I want to flash Lollipop 5.0.2 Sense 7.
The RUU is from a Taiwanese variant 820ys which runs Lollipop 5.0.2 and Sense 7 out of the box, same models(htc_a50ml_dtul)
The problem is that the Kitkat Firmware has smaller partitions compared to the lollipop one. An example is the Kitkat system partition which is about 1.4Gbs while Lollipop has about 4.9Gbs, so I cannot flash with the same scatter file.
So I edit the scatter file to inflate the partitions in order to accommodate the big Lollipop files (sytem.img,recovery.img and boot.img) and perform firmware upgrade.
What could be stopping it from booting? Is it due the fact that the Lollipop boot and recovery are verified? Thanks in advance
Screenshots for Kitkat and Lollipop firmware files below
Click to expand...
Click to collapse
well this question will take the thread off topic. I would request you to create a new thread regarding this issue under "q&a,help and troubleshooting". Chances of your problem getting solved are higher if you do so. I will post my views regarding your issue in that thread. And i apologize to OP, because i only started answering questions irrelevant to his thread.
i totally accept off topics if they are helpful
sziraqui said:
but flashing recovery with SP flash tool will work for sure.
1. Put your custom recovery in the firmware folder,
2. del stock recovery.img,
3. rename your custom recovery as recovery.img,
4. load scatter file,
5. uncheck everything except recovery
6. click download and then connect your powered off phone to pc while holding vol down
someone Please confirm if this works with 820s, without worrying about bootloader
Click to expand...
Click to collapse
Hi.
It worked, but pressing Vol UP, not down. Anyway i've installed Recovery but when i try to access it from bootloader the device stopped me tellig that is for Android developers. I think that is because at the top of bootloader screen it tell "LOCKED". Any solution?
htc desire 820 softbrick not connecting with fastboot
hey guys,
i was trying to convert ZUI to CM and i messed up somewhere and i am only able to access fastboot mode now, my phones bootloader was unlocked before but some xda member told me to relock bootloader and try unlocking again to flash files but it didnt get unlocked after relocking.
so the present situation is i have a locked bootloader in fastboot mode and no recovery.
i want to flash system images through fastboot mode to bring it back to life, but it wont let me do it as bootloader is locked.
i tried unlocking the bootloader and it gives me the below error.
"FAILED. remote: oem unlock is not allowed"
how to get rid of this error and unlock the bootloader?
any help would be appreciated guys.
thanks in advance!
Try to flash via QPST tool with QFil
maryankomar said:
Try to flash via QPST tool with QFil
Click to expand...
Click to collapse
device doesnt show up in QFil
bump! someone please help
Go to fastboot .
Connect zuk to computer
Start adb
Use "fastboot -i 0x2b4c reboot-edl" y will reboot to dl mod and y can install right drivers for 9008 port.
If it not work than when y boot windows , press f8 chose "dont check drivers ....(something)"
Boot windows , uninstall zuk drivers , install it one more time and try to use qfil one more time .
Hello, I am in dire need of assistance. I'm not sure what I did, but I think i soft bricked my Le Pro 3 LEX727. I was attempting to install a custom rom, I wiped Delvik,system,cache,data then proceeded to flash lineage. When I rebooted it quickled flashed Le Eco bootup then crashed or went to a black screen. Same thing with recovery, quickly flashes "Le Eco Recovery" then goes black. I can boot into Fastboot and the device shows up there, but when I attempt to do "fastboot oem unlock-go" I get "FAILED (remote: oem unlock is not allowed)". Please help me, I really need to fix my phone.
Sincerely,
A grateful person who messed up their phone.
It goes into recovery mode? power button + volume up button. redo the procedure and leaves everything in the options selected .. or I hope you made a backup beforehand, there are various discussions on how to recover
If you can access fastboot, youre golden. Just flash a stock rom
trizex said:
If you can access fastboot, youre golden. Just flash a stock rom
Click to expand...
Click to collapse
Can you help me out with where to go from there, or direct me to a thread? When I attempt to unlock oem so i can flash twrp it says "oem unlock is not allowed"
thank you very much.
Gynlemon said:
It goes into recovery mode? power button + volume up button. redo the procedure and leaves everything in the options selected .. or I hope you made a backup beforehand, there are various discussions on how to recover
Click to expand...
Click to collapse
No, it can only boot into fastboot.
Yewsif said:
No, it can only boot into fastboot.
Click to expand...
Click to collapse
https://forum.xda-developers.com/le-pro3/how-to/guide-to-install-stock-rom-custom-t3486600
Gynlemon said:
https://forum.xda-developers.com/le-pro3/how-to/guide-to-install-stock-rom-custom-t3486600
Click to expand...
Click to collapse
Thank you, but as I cant get into the devices OS, I cannot enable usb debugging and oem unlock. Only thing I can access is the fastboot menu.
Have you tried flashing the aboot file? from this thread
fastboot flash aboot emmc_appsboot.mbn
then
reboot
then
Fastboot mode using power-off + volume down.
then
fastboot oem unlock-go
then you can boot or flash into TWRP or whatever recovery
Joms_US said:
Have you tried flashing the aboot file? from this thread
fastboot flash aboot emmc_appsboot.mbn
then
reboot
then
Fastboot mode using power-off + volume down.
then
fastboot oem unlock-go
then you can boot or flash into TWRP or whatever recovery
Click to expand...
Click to collapse
No, I have not. What do you mean the aboot file.
Yewsif said:
No, I have not. What do you mean the aboot file.
Click to expand...
Click to collapse
http://newandroidbook.com/Articles/aboot.html
Joms_US said:
http://newandroidbook.com/Articles/aboot.html
Click to expand...
Click to collapse
Thank you for your time and help, but I have no idea what to do with that link, I understand the adb commands I need to put in. Is there anyway you can sort of walk me through it with steps?
Thank you.
You prolly have more experience than me so I am just pointing to you what I did to unlock the bootloader which seems to be the problem? ^_^
https://forum.xda-developers.com/showpost.php?p=71116203&postcount=8
I gave the instructions and link there already but here is the direct link that contains the aboot file.
https://www.androidfilehost.com/?fid=313042859668275431
joms_us said:
you prolly have more experience than me so i am just pointing to you what i did to unlock the bootloader which seems to be the problem? ^_^
https://forum.xda-developers.com/showpost.php?p=71116203&postcount=8
i gave the instructions and link there already but here is the direct link that contains the aboot file.
https://www.androidfilehost.com/?fid=313042859668275431
Click to expand...
Click to collapse
thank you so much, flashing the aboot file worked and made my custom rom run perfectly! I love you.
Yewsif said:
thank you so much, flashing the aboot file worked and made my custom rom run perfectly! I love you.
Click to expand...
Click to collapse
Thanks would be enough.
Joms_US said:
Have you tried flashing the aboot file? from this thread
fastboot flash aboot emmc_appsboot.mbn
then
reboot
then
Fastboot mode using power-off + volume down.
then
fastboot oem unlock-go
then you can boot or flash into TWRP or whatever recovery
Click to expand...
Click to collapse
I royally messed up my custom ROM install, this got me to boot again. Thank you.
This should be a sticky, or a part of any installation method. Why? If you upgrade to the latest official firmware (e.g. 21s+), your bootloader will no longer be unlocked with the oem unlock-go method. You *have* to flash this bootloader first so you can then unlock it and do all the other steps.
kaivorth said:
I royally messed up my custom ROM install, this got me to boot again. Thank you.
Click to expand...
Click to collapse
Glad this thread helped you.
Joms_US said:
Have you tried flashing the aboot file? from this thread
fastboot flash aboot emmc_appsboot.mbn
then
reboot
then
Fastboot mode using power-off + volume down.
then
fastboot oem unlock-go
then you can boot or flash into TWRP or whatever recovery
Click to expand...
Click to collapse
This works ! Thank you
Joms_US said:
Have you tried flashing the aboot file? from this thread
fastboot flash aboot emmc_appsboot.mbn
then
reboot
then
Fastboot mode using power-off + volume down.
then
fastboot oem unlock-go
then you can boot or flash into TWRP or whatever recovery
Click to expand...
Click to collapse
great thanks for you. I finally unbrick X727 with same way.
Hi, Can somebody tell me if its necessary to unlock the bootloader before flashing the official firmware. My device is not rooted and has a locked bootloader but as I wanted to flash the original firmware to refresh it, I was wondering if I can do it without unlocking the bootloader.
Thanks in advance.
Check this thread for EDL Mode https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292. Reboot to EDL Mode and flash using MI Flash Tool. This flashing not reuqires bootloader unlock.
sarath medithi said:
Check this thread for EDL Mode https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292. Reboot to EDL Mode and flash using MI Flash Tool. This flashing not reuqires bootloader unlock.
Click to expand...
Click to collapse
Sorry but that is not correct, the A1 uses just fastboot, we don't use EDL.
Anyway just follow this guide
http://en.miui.com/thread-807252-1-1.html
You just need to install miFlash or use fastboot commands if your more advanced, reboot to bootloader
hi anybody help me? im flashing non android rom such as luneos nexus gsm rom but not booted and not able to get recovery just fastboot mode but fastboot command is said remote: command not allowed. im unlocked bootloader. after fastboot oem unlock command fastboot says status mailformed 1 bytes. any body help solution for me? thank you for helping me.
im using debian on my computer
MolnarMilanDorian said:
hi anybody help me? im flashing non android rom such as luneos nexus gsm rom but not booted and not able to get recovery just fastboot mode but fastboot command is said remote: command not allowed. im unlocked bootloader. after fastboot oem unlock command fastboot says status mailformed 1 bytes. any body help solution for me? thank you for helping me.
Click to expand...
Click to collapse
Fastboot boot doesn't work for some reason on Huawei P8 lite. You need to flash the recovery first and then boot to it by holding vol + and power.
Botar230 said:
Fastboot boot doesn't work for some reason on Huawei P8 lite. You need to flash the recovery first and then boot to it by holding vol + and power.
Click to expand...
Click to collapse
I have the same issue and when i trying to flash the stock recovery it says command not allowed but when flashing custom recovery like TWRP it flashing but i cant get into it if anyone can help please because i go to a lot of services centers and they say that the phone is dead and i have to throw it in the trash:crying::crying::crying::crying:
Abdala2307 said:
I have the same issue and when i trying to flash the stock recovery it says command not allowed but when flashing custom recovery like TWRP it flashing but i cant get into it if anyone can help please because i go to a lot of services centers and they say that the phone is dead and i have to throw it in the trash:crying::crying::crying::crying:
Click to expand...
Click to collapse
Download this recovery , flash it by typing "fastboot flash recovery <path>.img", after flashing reboot the phone by typing "fastboot reboot", then unplug the USB cable and hold the power button to shut the phone down. Now hold the Vol+ and power button at the same time, release the buttons when the Huawei logo appears, and you should be in TWRP.
Botar230 said:
Download this recovery , flash it by typing "fastboot flash recovery <path>.img", after flashing reboot the phone by typing "fastboot reboot", then unplug the USB cable and hold the power button to shut the phone down. Now hold the Vol+ and power button at the same time, release the buttons when the Huawei logo appears, and you should be in TWRP.
Click to expand...
Click to collapse
I will give a try but i tell when i flashing any recovery i cant get into it
sorry but recovery.img is not working for me because fastboot says remote: command not allowed so im need p8 lite unlock bootloader code because badly installed luneos is relocking my bootloader so please send unlock code for me. thanks
MolnarMilanDorian said:
sorry but recovery.img is not working for me because fastboot says remote: command not allowed so im need p8 lite unlock bootloader code because badly installed luneos is relocking my bootloader so please send unlock code for me. thanks
Click to expand...
Click to collapse
You have to fill this , then Huawei will send the code to you in 24 hours.
Botar230 said:
You have to fill this , then Huawei will send the code to you in 24 hours.
Click to expand...
Click to collapse
thank you im feel this and sending code but not working for me fastboot says password wrong. im give product id with imei24.com but im think it is generated product id not original :/ can you help me? how can im find original product id for my bricked p8 lite?