Database Users

Problem downgrading to MM from N

Hey guys!
I've installed the Nougat beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed Nougat via Melticulus TWRP
1. Installed Revolution Recovery (because Melticulus TWRP had stopped working, idk why)
2. Flashed OEMInfo
3. Copied Version B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN and tried to flash one of the versions.
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa

4240Benny said:
Hey guys!
I've installed the MM beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed MM via Melticulus TWRP
1. Installed Revolution Recovery because Melticulus TWRP had stopped working (idk why)
2. Flashed OEMInfo
3. Copied B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa
Click to expand...
Click to collapse
You installed MM BETA on MM and now wanna downgrade to MM ..? You know what means MM? On which mm you ware before?

sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)

4240Benny said:
sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)
Click to expand...
Click to collapse
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.

Chisetdel31260 said:
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.
Click to expand...
Click to collapse
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?

4240Benny said:
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?
Click to expand...
Click to collapse
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458

Chisetdel31260 said:
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
Thank you, I'll try this

It doesn't work for me. The strange thing is I can't even flash system using fastboot, it gives me a FAILED (remote: sparse flash write failure) error...

can someone send me a NANDROID BACKUP of MM for VNS-L21?
PLS!!!!!!

Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?

Chisetdel31260 said:
Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?
Click to expand...
Click to collapse
Well, fastboot works, I'm able to flash recovery, recovery2 and boot but I'm not able to flash system. I can't install any os. I've used the C432OemInfo-DUALSIM-P9LITE.zip from @BadWolfYe.

???
what do you want now?
downgarde to mm or install Android N you can do both in this situation

Pls help me asap!!!!!!!
Just send me a nandroid backup of mm for vns-l21 dual sim please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo

shann1231 said:
what do you want now?
downgarde to mm or install Android N you can do both in this situation
Click to expand...
Click to collapse
Well, no, I can't. Thats the problem. When I try to flash MM system.img it doesn't work (see post above) and when I try to do it with the dload method it tells me that the version is not compatible...

shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
well...how?
and pls help me ASAP!!!!!

All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message

shann1231 said:
All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message
Click to expand...
Click to collapse
alright...

shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
Could you explain it here? Maybe it solves my problem too

just tell me one thing why are you installing mm when you can install android n

Huawei p9 lite

Hi Guys
I have huawei p9 lite and I need firmware VNS-L31C900B150
I can't find it in the internet
Please help I need it to reflash my phone ..

Use Huawei firmware finder or just use the c432 version, I recommend it

Potato997 said:
Use Huawei firmware finder or just use the c432 version, I recommend it
Click to expand...
Click to collapse
I already tryed C432 and it doesn't work
And my phone is off because it doesn't have any OS so I can't use huawei firmware finder
Is there any idea or solution for this problem..!

Huawei firmware finder is also a program for Windows, Google it

Potato997 said:
Huawei firmware finder is also a program for Windows, Google it
Click to expand...
Click to collapse
Yeah now I found it and tried it but it's doesn't work
I can't found my device firmware ..
Please any more idea

Can you access to fastboot and TWRP?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
do u know how to flash Cust, Vendor, Product etc. for p9 lite???
or can you give me link to download them and flash?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
yes I can access to fastboot only
can't access to TWRP

Try to flash Meticulus's TWRP, if it does not work try Revolution recovery

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Already I tried to flash TWRP and it flashed good but when I try to get TWRP mode my device doesn't work
here is my full problem https://forum.xda-developers.com/huawei-p9lite/help/huawei-p9-lite-flashed-formating-t3576669

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Now I get revolution recovery and I can access to it
I want to install lineageOS 14.1 like here https://www.youtube.com/watch?v=hNhv-fKJFaw
but after I finish my phone doesn't work
I think that's because revolution recovery " I cant install TWRP recovery but my phone doesn't work on TWRP I don't know why "
can you help me with this please..

To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found

Potato997 said:
To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found
Click to expand...
Click to collapse
I'm not sure if I understand to you
I don't have any os on my phone now
and I tried to install lineageos like video above and everything done but phone doesn't work..

Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.

Potato997 said:
Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.
Click to expand...
Click to collapse
Thank you because you're here with me..
I tried every firmware to flash it on my device and no one help me
I can't find my device firmware " VNS-L31C900B150 " even with huawei firmware finder
each time I get new problem or just phone tel me incorrect version please download correct version ..
I don't know what I will do to use my phone :crying:
Do you have any idea to re-life my phone..

Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware

Potato997 said:
Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware
Click to expand...
Click to collapse
yeah I tried c432 and device get error " incorrect version please download correct version "
and what you mean in "oeminfo" I can't find results after search for it and my device name on this forum..!

Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432

Potato997 said:
Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432
Click to expand...
Click to collapse
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "

baselmd47 said:
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "
Click to expand...
Click to collapse
Man, you flash wrong oeminfo...
That oeminfo is maybe for VNS-L21...
Regarding bootloader unlock code if you can provide IMEI/SN from phonebox i can generate a unlock code for you.

Rollback NXT-AL10 TO EMUI 6 ?

HI
can anyone help me to rollback my nxt-al10 to emui 6 please

drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??

Yes ,thank you very much ,i mean emiu 4.1 please

drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146

I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.

bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help

​
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
​
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.

bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:

I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .

Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....

Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.

I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?

Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:

Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?

TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:

Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?

2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:

Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....

I need help updating to nougat

Hey guys, i need some experts. Anyway, i own p9 lite L31C440B160 and i want to update to nougat, badly. However, i cant find any firmware with my number c440, does it even matter?
Can you please help me update to b370 or similar. I need it badly. Also, do i need to unlock bootloader on my p9 lite to flash custom roms?
btw, my phone is vendor:ee country:gb

faruk.foco said:
Hey guys, i need some experts. Anyway, i own p9 lite L31C440B160 and i want to update to nougat, badly. However, i cant find any firmware with my number c440, does it even matter?
Can you please help me update to b370 or similar. I need it badly. Also, do i need to unlock bootloader on my p9 lite to flash custom roms?
btw, my phone is vendor:ee country:gb
Click to expand...
Click to collapse
You have to debrand your phone...
That presume: unlock bootloader + twrp + root + (prepare in dload folder a C432 - B160/B161 firmware) + flash oeminfo C432 + repair firmware with dload folder.
It is a lot to do and somethings may goes wrong resultin in bricking your phone...
If you assume the risks, after that you have a C432 - B160/B161 phone which can be updated to B370/B371 via Firmware Finder.

gtdaniel said:
You have to debrand your phone...
That presume: unlock bootloader + twrp + root + (prepare in dload folder a C432 - B160/B161 firmware) + flash oeminfo C432 + repair firmware with dload folder.
It is a lot to do and somethings may goes wrong resultin in bricking your phone...
If you assume the risks, after that you have a C432 - B160/B161 phone which can be updated to B370/B371 via Firmware Finder.
Click to expand...
Click to collapse
Soooo all in all its not worth it? Thank man anyway...

faruk.foco said:
Soooo all in all its not worth it? Thank man anyway...
Click to expand...
Click to collapse
You have to decide if worth or not...

gtdaniel said:
You have to decide if worth or not...
Click to expand...
Click to collapse
Since you are here and obviously know a lot more about p9 lite than me, can you please find me a guide to do stuff that you told me to do. I know it's a lot to ask for, but I've been grinding all week trying to find guides etc and couldn't. Thanks in advance!

faruk.foco said:
Since you are here and obviously know a lot more about p9 lite than me, can you please find me a guide to do stuff that you told me to do. I know it's a lot to ask for, but I've been grinding all week trying to find guides etc and couldn't. Thanks in advance!
Click to expand...
Click to collapse
What you have to do i already said but you have to read arround here to do followings...
1. From anywhere you are (B336, B329, B170-160-130) you have to prepared in dload folder a B160/B161 stock firmware (B160 for Dual Sim, B161 for Single Sim).
2. Flash oeminfo/custom.bin (for SS phone or DS phone ) for your phone localisation: C150, C185, C432.
3. After that firmware become corrupted and need to be repaired from dload folder via 3 keys pressed / dialer code / emui error message.
4. Once you have a functional B160/B161 firmware install Firmware Finder (+proxy addon) and check <Use new firmware> and <Use system updater>.
5. Reconfigure WI-Fi connection from indications in Firmware Finder Proxy.
6. Search for B370/B371 firmware (B370 for DS, B371 for SS) of 1,94 Gb size for your phone localisation and send it to updater.
7. From there it is downloaded, verified and reboot to emui updater wich make his work and bring you B370/B371 firmware.
PS: - for flashing oeminfo/custom.bin i recomand this tool which make that work just fine.
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
- if you have a flash-able zip of oeminfo/custom.bin i recommend flashing with twrp.

gtdaniel said:
What you have to do i already said but you have to read arround here to do followings...
1. From anywhere you are (B336, B329, B170-160-130) you have to prepared in dload folder a B160/B161 stock firmware (B160 for Dual Sim, B161 for Single Sim).
2. Flash oeminfo/custom.bin (for SS phone or DS phone ) for your phone localisation: C150, C185, C432.
3. After that firmware become corrupted and need to be repaired from dload folder via 3 keys pressed / dialer code / emui error message.
4. Once you have a functional B160/B161 firmware install Firmware Finder (+proxy addon) and check <Use new firmware> and <Use system updater>.
5. Reconfigure WI-Fi connection from indications in Firmware Finder Proxy.
6. Search for B370/B371 firmware (B370 for DS, B371 for SS) of 1,94 Gb size for your phone localisation and send it to updater.
7. From there it is downloaded, verified and reboot to emui updater wich make his work and bring you B370/B371 firmware.
PS: - for flashing oeminfo/custom.bin i recomand this tool which make that work just fine.
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
- if you have a flash-able zip of oeminfo/custom.bin i recommend flashing with twrp.
Click to expand...
Click to collapse
Thank you very much man!!

Vns p31c636b170 how to install naugat in this ,
if some have zip file link that's better, or any suggestions please

[TUTORIAL-easiest] Rebranding to L19 C10 (Russian, EU) for Oreo update + video

Hi, I will show you the most easiest way to get oreo update (emui 8).
you must have installed twrp and unlocked bootloader.
1. Download this https://forum.xda-developers.com/honor-8/development/tool-srk-tool-huawei-bootloader-root-t3470823
2. Press 7 then 9, next 7 and 5.
3. Now download 2 files: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v64076/f1/full/update.zip thanks to @jithendrav83
https://www.hihonor.com/uk/support/details/index.html?DOC_ID=92135 <- first
4. flash it by dload method
thats all. Now update your phone by huawei built-in updater or firmware finder.
But for me the best option is unlocking bootloader again, root then flashing by this tutorial: https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
(method 2)
VIDEO OF EMUI 8 ON HONOR 8:
https://www.youtube.com/watch?v=VVe9gsyVxd0&feature=youtu.be

As you wrote, then the update will wait forever.
At this location you can, because. on the Russian version in the folder "cust" is your region. I recommend that you visit the Russian forum 4PDA.RU

Hi,
Would this work on Honor 8 single Sim device (I've FRD-L02)?

[email protected] said:
Hi,
Would this work on Honor 8 single Sim device (I've FRD-L02)?
Click to expand...
Click to collapse
Yes. You can rebrand L02, L04 to L09 without any issues.

hackslash said:
Yes. You can rebrand L02, L04 to L09 without any issues.
Click to expand...
Click to collapse
Are you sure? He can lost his cellular connection and IMEI.

WYPIERDAALAAC said:
Are you sure? He can lost his cellular connection and IMEI.
Click to expand...
Click to collapse
As per my guide, you only lose it if you're rebranding to AL/DL (chinese). Rebranding from L02, L04 to L09 is perfectly safe (I'm running L09C10 on my L04)

So best way to get Oreo on L04 is to rebrand with this method and redlotus to the Russian EU firmware and everything will work?

Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.

[email protected] said:
Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.
Click to expand...
Click to collapse
If you look at the XML File you used for the RedLotus method, you can see that there are two versions in it (L09C10 and L19C10). I suppose that's the reason why it's bugging for you.
Don't know for sure though. Trying that method now too, will report back if that's really the problem.

I dont have windows pc but Mac. How can I rebrand?

[email protected] said:
Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.
Click to expand...
Click to collapse
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.

spica1234 said:
I dont have windows pc but Mac. How can I rebrand?
Click to expand...
Click to collapse
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.

hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Gr8, thank you

WYPIERDAALAAC said:
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.
Click to expand...
Click to collapse
bro you best way but me amature
please send link to me
FRD_HWOTA8_ALLINONE.zip this file in 4pda but i cant to download
please please please

WYPIERDAALAAC said:
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.
Click to expand...
Click to collapse
Doesn't work for me. Always results in a bootloop with "Your device is unlocked..." etc.
Same with RedLotus too. I don't know if it's the firmware you linked or the recoveries, but ehh... nah, probably gonna go back to where I was before.

hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Step 3. Download latest naugat 3 files for L09C10. Means last naugat that was released right before oreo in FF.
Dont i need marshmallow 3 files?
Naugat filez will work?

spica1234 said:
Step 3. Download latest naugat 3 files for L09C10. Means last naugat that was released right before oreo in FF.
Dont i need marshmallow 3 files?
Naugat filez will work?
Click to expand...
Click to collapse
Not Marshmallow.
Yes, last Nougat released for C10.

Hi,
Can anyone share working TWRP for Oreo? Thanks.

[email protected] said:
Hi,
Can anyone share working TWRP for Oreo? Thanks.
Click to expand...
Click to collapse
I tried out some of the EMUI 8 TWRP's that I could find but none works for the Honor 8 yet.
Would be grateful for a working one too.

hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Just to be clear, since I prefer not to f this up...this will pretty much let me rebrand from FRD-L04 without the need for a computer correct? Also these step you've laid out don't require any of the steps posted in the OP?