Related
Hi, before start, i'm not a dev and i inform you that i'm not responsable for any issue caused by script and indications in the post.
i make this script for enable performance mode like in CM rom in all aosp or caf based rom.
What is performance mode?
Performance mode change the usage of big and little core on the device. In balanced mode for the most of process the device uses the little core and only when a big load is detected the big core start to scaling. In performance mode the device use more the big core also for medium loads and less the little core. This is made possible by enabling the sched_boost in the Heterogeneous Multi- Processing scheduling settings (HMP).
Script link: http://pastebin.com/8FrVkVW4
After run script make sure that in interactive governor settings use_sched_load and use_migration_notif are set to 0 for both cpus
For restore the balanced mode reboot the device or run this script: http://pastebin.com/QG5bkH5U
Current version: v1.3
Status: Stable
Optional interactive settings:
http://pastebin.com/5u6t9Y2X
I also raccomand to use an hotplug. Personally i use Msm_hotplug
TEST REPORT
Info:
Script version: v1.3
Device: Redmi note 3 pro 3/32
Rom: Aoscp 3.1.3
Kernel: Agni pure 3.8
Additional kernel settings (not applied by the stripts):
Min freq big core: 883 MHz
Min freq little core: 691 MHz
Msm hotplug: enabled (1big core and 2 littles cores always on)
Scheduler: zen readahead 2048 kb
Partitions filesystems:
Filesystem /data /cache: f2fs
Filesystem /system: ext4
V 1.3 Test screenshots:
Look interesting. Can I flash this on aoscp?
thepomp said:
Look interesting. Can I flash this on aoscp?
Click to expand...
Click to collapse
Sure, but not flash only copy file in a txt file afer run with a script app. like this https://play.google.com/store/apps/details?id=com.ryosoftware.initd&hl=en
ps i forgot to tell that you need to set use sched load in cpu governor to 0. And wait for v1.2 it came i 5 min
Is ot ok to have this one miui MM?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Is ot ok to have this one miui MM?
Click to expand...
Click to collapse
Last time that i use miui was on LP, and you can enable performance mode in battery settings, i dont know if in MM this feature is present, probably yes. The only difference is that the script also change cpubw governor probably performance mode in miui not do it. But you can run the script and try, probably all directory are correct. Please if you try let me know
lafonte said:
Last time that i use miui was on LP, and you can enable performance mode in battery settings, i dont know if in MM this feature is present, probably yes. The only difference is that the script also change cpubw governor probably performance mode in miui not do it. But you can run the script and try, probably all directory are correct. Please if you try let me know
Click to expand...
Click to collapse
Ok, will u tell me what is the best app to run that script?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Ok, will u tell me what is the best app to run that script?
Click to expand...
Click to collapse
Try this https://play.google.com/store/apps/...app&pcampaignid=APPU_1_AB9QWI2pKIPowALZmrOYAw
Put the script in a folder after select the folder with the script give at app root permission and run. After you can enable the autorun after boot for apply the settings all time that you turn on the device
lafonte said:
Try this https://play.google.com/store/apps/...app&pcampaignid=APPU_1_AB9QWI2pKIPowALZmrOYAw
Put the script in a folder after select the folder with the script give at app root permission and run. After you can enable the autorun after boot for apply the settings all time that you turn on the device
Click to expand...
Click to collapse
I still have no idea how to use it.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 05:49 PM ---------- Previous post was at 05:14 PM ----------
After applying those two script (performance mode and optional interactive) I think I have no big difference on performance itself (pic.1 performance enabled, pic.2 script hasn't ran yet) also I think an error occured when the script was executed (pic.3)
multiROM 6.12.8 MM.
Stock Kernel and Stock Interactive Governor.
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
I still have no idea how to use it.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 05:49 PM ---------- Previous post was at 05:14 PM ----------
After applying those two script (performance mode and optional interactive) I think I have no big difference on performance itself (pic.1 performance enabled, pic.2 script hasn't ran yet) also I think an error occured when the script was executed (pic.3)
multiROM 6.12.8 MM.
Stock Kernel and Stock Interactive Governor.




Click to expand...
Click to collapse
Error is related to different location of cpubw governor in miui, and missing interactive CPU governor, miui stock governor is ondemand and probably hasn't interactive. Ondemand governor use the schead load and the migration notify of hmp scheduler and you cant disable it. This is an important step for use correctly the cpu in performance mode, because hmp is setted for work with usual big.little architetture. So you need to use a custom kernel like agni, that is the first think to do if you ask for more performance.
lafonte said:
Error is related to different location of cpubw governor in miui, and missing interactive CPU governor, miui stock governor is ondemand and probably hasn't interactive. Ondemand governor use the schead load and the migration notify of hmp scheduler and you cant disable it. This is an important step for use correctly the cpu in performance mode, because hmp is setted for work with usual big.little architetture. So you need to use a custom kernel like agni, that is the first think to do if you ask for more performance.
Click to expand...
Click to collapse
Unfortunately agni and radon wont let my fingerprint work so simply I prefer to have fingerprint works than to have better performance. Moreover I rarely to play game on Android.
Sent from my Redmi Note 3 using Tapatalk
Please provide the download link for kcal.zip file which can be used for screen color adjustments in kernel auditor.
I accidently deleted that file, if anyone here has it please share it.
ch3tan007 said:
Please provide the download link for kcal.zip file which can be used for screen color adjustments in kernel auditor.
I accidently deleted that file, if anyone here has it please share it.
Click to expand...
Click to collapse
Kcal is actually the hardware's display settings exposed by a sysfs interface
What zip? You need to compile a kernel with the patch to get this feature
anupritaisno1 said:
Kcal is actually the hardware's display settings exposed by a sysfs interface
What zip? You need to compile a kernel with the patch to get this feature
Click to expand...
Click to collapse
I somewhere found the kcal zip file which i flashed over h20s stock rom for color adjustments. But yesterday i accidently formatted my phone so need that file again.
ch3tan007 said:
I somewhere found the kcal zip file which i flashed over h20s stock rom for color adjustments. But yesterday i accidently formatted my phone so need that file again.
Click to expand...
Click to collapse
Are you sure you didn't unknowingly flash a kernel?
Because what you're saying is impossible without touching boot.img
anupritaisno1 said:
Are you sure you didn't unknowingly flash a kernel?
Because what you're saying is impossible without touching boot.img
Click to expand...
Click to collapse
Donno mate but when i checked kernel version in about pbone all were stock and i could see screen options in kernel auditor
ch3tan007 said:
Donno mate but when i checked kernel version in about pbone all were stock and i could see screen options in kernel auditor
Click to expand...
Click to collapse
I can make the kernel show perf+ too
Just need to change one variable in the defconfig and 2 exported variables in the shell
Why don't you try a ROM that comes with kcal, like seraph's build or try out something like halogenos
Or maybe you can find my thread in the development session and flash my ROM and custom kernel from there?
Anyways if you want kcal on hydrogenos, boeffla kernel, I'm not going to say it again
anupritaisno1 said:
I can make the kernel show perf+ too
Just need to change one variable in the defconfig and 2 exported variables in the shell
Why don't you try a ROM that comes with kcal, like seraph's build or try out something like halogenos
Or maybe you can find my thread in the development session and flash my ROM and custom kernel from there?
Anyways if you want kcal on hydrogenos, boeffla kernel, I'm not going to say it again
Click to expand...
Click to collapse
I have tried seraph's and other cm14.1 based rom, yes sure will give a try to ur rom too microg looks useful feature.:good:
Thanks for ur replies.
Your warranty is now void, don't blame me if your phone blows up blahblahblah. Make sure to have latest TWRP.
BACKUP! Stock untouched boot.img is being flashed, so if you'd like color control, flash kernel below. Not a dev, just a hobby, enjoy.
ROM Info:
Only system and kernel are being flashed, no Modem, BL, etc.
Based off of 20F Complete zip from @autoprime.
*Pixel Black bootanimation.
*su.d support
*zipaligned
Flash in recovery, wipe cache and dalvik, Profit??????? :victory:
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20F or C or A (only C&A if you flashed complete 20F first) if you like.
Link: H830_20F_DeOdexed
MD5: f2b3a26c6374a389542aa11f157d519c
Credits: @Chainfire for supersu, / @autoprime for stock boot.img, / @jcadduono for TWRP, Original source and scripts used while compiling!!!, / @Tilde88 for taking the time to show me how to do this!, / @savoca for KCAL & app! and Thanks to @freeza for the updated KCAL.c source file. / Thanks to @f4bio, @onestyle007 and @Pphish20 for testing, / @Sultanxda, / @flar2 for ElementalX gov/Sound control/Vibration [email protected]#[email protected]#[email protected]#! , / @Eliminater74, / @WhyOrean, / @Tkkg1994 , / @eng.stk for his awesome blu_spark Kernel!, / @CrazyGamerGR, / @tbalden, / !!!!!!!!@franciscofranco !!!!!!!!, / @yarpiin, / @alucard_24, / @Lord Boeffla, / @xpirt, / @DespairFactor, / @archeart, / @neobuddy89, / @farovitus, / @arter97
....Someone else I'm sure I forgot.
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
(Good starting point for color: **Check out this post from @marco_wack or All 3 colors at 256, Saturation 64, Value 127, Contrast 129.)
Asgard Kernel
*Based off of https://github.com/jcadduono/android_kernel_lge_msm8996 as original source.
*Compiled using [TOOLCHAIN]UBER Toolchains - v6.x
*Added Westwood as default TCP Congestion
*KCAL
*Disabled CRC check
*Battery improvements
*SELinux set to Permissive
*Added Gov's - alucard, bioshock, blu_active, conservativex, despair, electrodemand, elementalx, HYPER, intellidemand, intellimm, ironactive, lightning, lionfish, lionheart, nebula, nightmare, ondemand_x, pegasusq & wheatley.
*Added IO - bfq, fifo, fiops, sio, sioplus, tripndroid, vr & zen.
*Added TCP - A lot.
*Sound Control (Only Headphones)
*Adrenoboost (Default Off)
*Dynamic Fsync and Fsync Toggle
*Vibration Control
*Removed verifiedbootstate flag
*Replaced Interactive Gov with one from the OP3 (Removed Triton and Cancun)
*A lot of other changes throughout the kernel
Version 5.7 Changes & Links
Version 5.3 Changes & Links
Version 5.2 Changes & Links
Version 5.1 Changes & Links
Version 5 Changes & Links
Changes/Links v4.5
Link: Asgard_20C_v3
MD5: 27724e7a76a2375bb6bbf05faad70249
Link: Asgard_20C_v2.2
MD5: 71091d602233f85cbc4e674a7458110c
Link: 20CStock+Kernel -Just westwood and KCAL-
MD5: b6bd5ef016c3fe5d9a3f96aa2af32f92
-Changelog v3-
Source: (Asgard)-https://github.com/lordodin912/Asgard_H830_msm8996
(Stock+)-https://github.com/lordodin912/H830-20A-
Thanks again to @jcadduono for the original source and scripts used for compiling! https://github.com/jcadduono/android_kernel_lge_msm8996
Reserved
Just so I'm sure here. I'm currently on 20a deodexed with NSS kernel. To flash this, I need to flash 20c complete first, then this, then the NSS kernel?
Sent from my LG-H830 using Tapatalk
ledvedder said:
Just so I'm sure here. I'm currently on 20a deodexed with NSS kernel. To flash this, I need to flash 20c complete first, then this, then the NSS kernel?
Click to expand...
Click to collapse
Yup
New kernel, read OP.
What dies the Asgard kernel have and is it better than the NSS one? Thanks.
Edu616 said:
What dies the Asgard kernel have and is it better than the NSS one? Thanks.
Click to expand...
Click to collapse
Looks like NSS doesnt allow SafetyNet bypass and Asgard does? I am going to try Asgard.
An ultra lite version of this would be pretty cool.
Can we flash the kernels over the stock rom(rooted)?
pottyvick said:
Can we flash the kernels over the stock rom(rooted)?
Click to expand...
Click to collapse
Yea
I had issues with Bluetooth and the Asgard kernel (darkness governor). My connection would drop out every few minutes, only to be regained by turning Bluetooth off and back on. Switvhed back to NSS and the issue is gone. Thanks for the great work!
Mike_77 said:
I had issues with Bluetooth and the Asgard kernel (darkness governor). My connection would drop out every few minutes, only to be regained by turning Bluetooth off and back on. Switvhed back to NSS and the issue is gone. Thanks for the great work!
Click to expand...
Click to collapse
Not sure why, didn't touch anything related to Bluetooth. Bluetooth was fine the other day, had it on for over an hour, without any drops....Rebuilding the kernel from original source anyway.
Just curious if Safety Net (Android Pay, specifically) is working for others? I upgraded from 20A rooted via: 20C Complete, SuperSU, 20C DeOdexed, Asgard, Root Switch (tried with stop all daemons, too). For me, Android Pay fails the check. The only complication being I had Magisk installed the first time around. I'm wondering if it's worth backing up with Titanium and doing a factory reset to go thru the process again.
Asgard kernel update, read OP.
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
ledvedder said:
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
+1
ledvedder said:
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
tomarin said:
+1
Click to expand...
Click to collapse
Here's my battery (2nd charge cycle) with just stock deodexed and Asgard with elementalX.
Just web browsing, brightness ~50%, mobile data only. Battery left - 89%. Don't know the "best" settings yet, hope this helps though.
Anyone know if As hard 1.5 kernel will work on H38020a?
Sent from my LG-H830 using Tapatalk
Tinbender418 said:
Anyone know if As hard 1.5 kernel will work on H38020a?
Click to expand...
Click to collapse
It'll prolly work. Was going to make a separate one but don't see any reason to not upgrade to 20C, if your already on nougat.
Tried and lost root. Don't have a Windows PC, so kind of afraid to try flashing again.
Sent from my LG-H830 using Tapatalk
After installing the O Preview, with no source code available for the kernel, I was wondering how I could run O as my daily driver with my apps like Sony Music, ES File Explorer (Root) etc, when Chainfire came with SR4 Beta.
Also required in my daily driver is my own custom kernel. Here is a kernel with boot.img from O along with ramdisk and module tweaks:
RACER_O
Kernel version name will show that of O stock boot image, but rest assured that some modifications have been done. Open the kernel zip to explore what is in.
Tweaks that are part of the kernel zip:
ramdisk: init.racer.rc, Bullhead power script, Ghost peper Interactive Gov Profile
default.prop: persist.bt.enableAptXHD=true, ro.opa.eligible.device=true added
Modules packaged for O: (I am testing these modules)
LED
SURROUND LOUDER
APTX - need libaptx.so and libaptxHD.so and may be one or two other files from AOSP BT Stack. As of now O-DP1 doesn't have those. Since the System UI shows the options, one can expect this feature to be activated in future O updates.
Apps packaged for O:
Pixel Launcher
Sony Ericsson Music
Reserved -1
Reserved for later
Reserved -2
Reserved for later
Here is a kernel with boot.img from O along with ramdisk and module tweaks:
RACER_O_20170324
Kernel version name will show that of O stock boot image, but rest assured that some modifications have been done. Open the kernel zip to explore what is in.
Is there any way to port this over to the Nexus 6P? Having aptX sounds fantastic (no pun intended), and the ramdisk tweaks could help with the sluggish performance in O.
So this is stock or does it have performance enhancements ? Its not overclocked is it ?
mikeprius said:
So this is stock or does it have performance enhancements ? Its not overclocked is it ?
Click to expand...
Click to collapse
No. Everything that goes into zImage of the kernel is stock. External modules and tunables are all that can be played with now.
Previous builds posted here have too much battery drain during active as well as idle, though they are still not show stoppers.
Here is a more stockish build with stock interactive gov and stock thermal conf tuning to see is there is any improvement on the battery front. Thermal appears to be work in progress. I have not seen any exposed parameter tunables such as /sys/module/msm_thermal/parameters/temp_threshold
RACER_O_20170325_Stock_I&T
Thanks for the info. I've been having a rough time with DP1. Can't root and having issues booting. Will try next release
Can't download. No mirrors found.
mikeprius said:
Thanks for the info. I've been having a rough time with DP1. Can't root and having issues booting. Will try next release
Click to expand...
Click to collapse
That's strange. I hope you are using latest Jolla recovery and Chainfire's Su...SR4. Root works like a charm for me. A pixel launcher and navbar animation are available, even before Charles comes up with his full mod, that is already in the making I think. Overall I have no reason to get back to nougat.
rachanta said:
That's strange. I hope you are using latest Jolla recovery and Chainfire's Su...SR4. Root works like a charm for me. A pixel launcher and navbar animation are available, even before Charles comes up with his full mod, that is already in the making I think. Overall I have no reason to get back to nougat.
Click to expand...
Click to collapse
Flash the preview O and used SuperSU SR4. I used standard TWRP, I believe 3.0.1. Didn't have any issues when loading TWRP and Preview O work. Just when I tried flashing SR4 via TWRP the thing went into bootloop and would not boot. The only way to force boot the ROM was to flash the stock preview kernel back. Not sure what happened, but could not get root to work flashing the ZIP
mikeprius said:
Flash the preview O and used SuperSU SR4. I used standard TWRP, I believe 3.0.1. Didn't have any issues when loading TWRP and Preview O work. Just when I tried flashing SR4 via TWRP the thing went into bootloop and would not boot. The only way to force boot the ROM was to flash the stock preview kernel back. Not sure what happened, but could not get root to work flashing the ZIP
Click to expand...
Click to collapse
Phone will boot normally after two reboots.
Mods and tweaks described are already in your kernel ?
Inviato dal mio KFGIWI utilizzando Tapatalk
amag3308 said:
Mods and tweaks described are already in your kernel ?
Inviato dal mio KFGIWI utilizzando Tapatalk
Click to expand...
Click to collapse
Yes
rachanta said:
Yes
Click to expand...
Click to collapse
I found a test folder with 24th march versions and main folder with 25th kernel versions. Which one should I install? What is RACER_O_20170325_GP.zip?
amag3308 said:
I found a test folder with 24th march versions and main folder with 25th kernel versions. Which one should I install? What is RACER_O_20170325_GP.zip?
Click to expand...
Click to collapse
It has Ghost Pepper interactive governor profile and stock thermal. The other option has stock interactive governor and stock thermal. The test builds are with different thermal-engine-8992.conf options. If you extract the zip you can play around with init.racer.rc and other files to pack different flavours and create your own kernel zip.
rachanta said:
That's strange. I hope you are using latest Jolla recovery and Chainfire's Su...SR4. Root works like a charm for me. A pixel launcher and navbar animation are available, even before Charles comes up with his full mod, that is already in the making I think. Overall I have no reason to get back to nougat.
Click to expand...
Click to collapse
were is the navbar animation for android O
Did anyone test if aptx is working?
Flashed racer 25th march version but did not work. I tried with flac and also spotify (of course my bt headset are capable) but logcat shows nothing
Inviato dal mio KFGIWI utilizzando Tapatalk
rachanta said:
After installing the O Preview, with no source code available for the kernel, I was wondering how I could run O as my daily driver with my apps like Sony Music, ES File Explorer (Root) etc, when Chainfire came with SR4 Beta.
Also required in my daily driver is my own custom kernel. Here is a kernel with boot.img from O along with ramdisk and module tweaks:
RACER_O
Kernel version name will show that of O stock boot image, but rest assured that some modifications have been done. Open the kernel zip to explore what is in.
Mods & Tweaks:
ramdisk: init.racer.rc, Ghost peper Interactive Gov Profile
default.prop: persist.bt.enableAptXHD=true, ro.opa.eligible.device=true added
msm_thermal: thermal-engine-8992.conf stock in use in the kernel for now
Installed, but dont seem to be doing anything: lights.bullhead.so, mixer_paths.xml
Help required: How to make O work with f2fs data and cache, usual fstab.bullhead mod has no effect
Apps packaged for O:
Pixel Launcher
Sony Ericsson Music
Click to expand...
Click to collapse
The lights.bullhead.so file is for the RED LED when on low battery. The mixer_paths.xml contains the DualMonoV2 LOUD "surround sound".
Simonthow1 said:
were is the navbar animation for android O
Click to expand...
Click to collapse
I am searching for it. Navbar animation in pixel o has some major advances. You can edit it to add 2 more buttons. We have to wait till somebody ports it.
Ok guys I am proudly presenting you Kernel profiles which are flashable via twrp...I have include four profiles and its initial version.Hopefully you all like
THe profiles which I have included is :
1) Balance
2) Performance
3) Battery
4) Gaming
Enjoy
*** warning its for only Hardrock kernel V7. If flashing on other kernels and if they dont have those governers, that will result in freeze, and reboots or totally hangs...
Update 2 Change logs :
Kernel profiles v2 for Hardrock kernel v10
Added new profiles:
1) Balanced
2) Battery
3) Battery Extreme (Dont complain if it lags)
4) Performance
5) Gaming
** REmember , it might lag in battery profile so no complains please
Kernel profiles v3 for Hardrock kernel nougat/oreo
Added 6 profiles --
1) Extreme battery
2) Battery
3) Performance
4) Gaming
5) Balanced
6) Hardcore (Just dont expect much battery)
Kernel profiles v4 for Hardrock kernel nougat/oreo
--> revamped all 6 profiles and added one more profile : Multitasking
Kernel profiles v5 for Hardrock kernel nougat/oreo [
--> REVAMPED BEST SETTINGS AGAIN AND ADDED 5 MAIN PROFILES
** again its for all nougat/oreo/miui please don't ask me again
Installation Instructions:
**BEFORE FLASHING ANY NEW PROFILE ZIP CLEAR DATA OF KERNEL AUDITOR PLEASE OR U WON'T GET PROFILES WORKING
1) install Kernel auditor from play store freshly or if u have already then clear data and cache first so that it will reset to fresh.
2) reboot to recovery and flash kernel profile zip
3) now reboot to system and open kernel auditor amd click on Profile tab
4) You will see four profiles : Battery, balanced , performance and Gaming.click on any profile and you are done
5) if all values are not set on boot then plz toggle set on boot option in kernel auditor.I mean all options till misc.
6) Go to settings and make Apply on boot delay to 20 seconds since sometimes 10 seconds is not enough to apply settings which are set before
You are set...
Download LInks:
Gdrive : https://drive.google.com/file/d/1CqqziOW5eYf5z92LsgOPtxBp7zGxQ3y_/view?usp=sharing
Android filehost : rt now having issues uploading to filehost
Download LInks V2: : https://www.androidfilehost.com/?fid=11050483647474829246
Download links profile v3 : https://www.androidfilehost.com/?fid=5862345805528058578
Download link profile v4 : https://www.androidfilehost.com/?fid=5862345805528067708
Download link profile v5 : https://drive.google.com/file/d/1VuJxYqLVVPiPwDVFD9I4HLD_sebMEi45/view?usp=sharing
Telegram link :
Guys please join my telegram group for kernel related quarries @hardrock_kernel
t.me/Hardrock_kernel
Credits and Thanks:
Thanks to @Senthil360 my buddy for Kernel guides in depth and awesome contributions towards Kernels
and also thanks to all my supporters and users who patiently waiting for this.
Donation link : https://www.paypal.me/Hardrock83
Thanks you very much for your hard work
Very smart
Thanks brother
Sent from my MI MAX 2 using Tapatalk
Thankyou
Awesome bro
Can i flash this if i'm using hardrock oreo v6?
KethG said:
Can i flash this if i'm using hardrock oreo v6?
Click to expand...
Click to collapse
As I mention its for v7 which uses different governors... So it won't work...wait for my Oreo v7..it will be released soon enough
"OP mentions in RED and BOLD that the profiles are only for v7 kernel"
"post number FIVE asks if he can flash the profiles on v6 kernel...."
welcome to xda
-[ROM][8.1][OFFICIAL] BootleggersROM 2.2 Stable [OXYGEN] [OTA]
-Hardrock Kernel v7 UC OC Extreme Edition Final [Permmisive][OREO]
-Kernel profiles for hardrock kernel
-Profile Performance
Hard_Rock83 said:
Ok guys I am proudly presenting you Kernel profiles which are flashable via twrp...I have include four profiles and its initial version.Hopefully you all like
THe profiles which I have included is :
1) Balance
2) Performance
3) Battery
4) Gaming
Enjoy
*** warning its for only Hardrock kernel V7. If flashing on other kernels and if they dont have those governers, that will result in freeze, and reboots or totally hangs...
Installation Instructions:
1) install Kernel auditor from play store freshly or if u have already then clear data and cache first so that it will reset to fresh.
2) reboot to recovery and flash kernel profile zip
3) now reboot to system and open kernel auditor amd click on Profile tab
4) You will see four profiles : Battery, balanced , performance and Gaming.click on any profile and you are done
5) if all values are not set on boot then plz toggle set on boot option in kernel auditor.I mean all options till misc.
6) Go to settings and make Apply on boot delay to 20 seconds since sometimes 10 seconds is not enough to apply settings which are set before
You are set...
Download LInks:
Gdrive : https://drive.google.com/file/d/1CqqziOW5eYf5z92LsgOPtxBp7zGxQ3y_/view?usp=sharing
Android filehost : rt now having issues uploading to filehost
Credits and Thanks:
Thanks to @Senthil360 my buddy for Kernel guides in depth and awesome contributions towards Kernels
and also thanks to all my supporters and users who patiently waiting for this.
Donation link : https://www.paypal.me/Hardrock83
Click to expand...
Click to collapse
Any update
blackxmafia said:
Any update
Click to expand...
Click to collapse
will push updates later today for v10 kernel
Change logs v2 :
Kernel profiles v2 for Hardrock kernel v10
Added new profiles:
1) Balanced
2) Battery
3) Battery Extreme (Dont complain if it lags)
4) Performance
5) Gaming
** REmember , it might lag in battery profile so no complains please
Download link : https://www.androidfilehost.com/?fid=11050483647474829246
BEFORE FLASHING THIS ZIP CLEAR DATA OF KERNEL AUDITOR PLEASE OR U WON'T GET PROFILES WORKING
Please remember spectrum support
kalawy said:
Please remember spectrum support
Click to expand...
Click to collapse
For what?? My profiles are better than spectrum..its same thing...u want unnecessary app download with unnecessary UI..
Whatever code i have put for kernel auditor ..same will be put in spectrumm..so u want just UI or functionality????
Its all same
Telegram link :
Guys please join my telegram group for kernel related quarries @hardrock_kernel
t.me/Hardrock_kernel
marc.com said:
-[ROM][8.1][OFFICIAL] BootleggersROM 2.2 Stable [OXYGEN] [OTA]
-Hardrock Kernel v7 UC OC Extreme Edition Final [Permmisive][OREO]
-Kernel profiles for hardrock kernel
-Profile Performance
Click to expand...
Click to collapse
-DotOs Oreo
- Hardrock Kernel v10 OREO
- Kernel Profiles for hardrock kernel (Gaming)
- Spectrum Profile (Gaming)
Awesome Work Bro, Thanks! @Hard_Rock83!:victory:
Hard_Rock83 said:
For what?? My profiles are better than spectrum..its same thing...u want unnecessary app download with unnecessary UI..
Whatever code i have put for kernel auditor ..same will be put in spectrumm..so u want just UI or functionality????
Its all same
Click to expand...
Click to collapse
spectrum profiles can be switched from a quick toggle tile
That is ui and fuctionality
Kernel auditor the easiest way is the widget and it's broken in most versions .. So i have to open kernel auditor and change profiles
kalawy said:
spectrum profiles can be switched from a quick toggle tile
That is ui and fuctionality
Kernel auditor the easiest way is the widget and it's broken in most versions .. So i have to open kernel auditor and change profiles
Click to expand...
Click to collapse
but to do that devs need to unnecessary go though a lot of pain compiling spectrum and putting same profile codes and repack to remdisk...kernel auditor is very easy and less time consuming for devs...
can't you wait for few seconds for kernel auditor to open and apply profiles....
kalawy said:
Please remember spectrum support
Click to expand...
Click to collapse
Hard_Rock83 said:
but to do that devs need to unnecessary go though a lot of pain compiling spectrum and putting same profile codes and repack to remdisk...kernel auditor is very easy and less time consuming for devs...
can't you wait for few seconds for kernel auditor to open and apply profiles....
Click to expand...
Click to collapse
For workaround just flash this zip through TWRP then you can use spectrum app on any rom.
Thanks again @Hard_Rock83 for your awesome Rom.
Cheers:fingers-crossed:
Chip Liang said:
For workaround just flash this zip through TWRP then you can use spectrum app on any rom.
Thanks again @Hard_Rock83 for your awesome Rom.
Cheers:fingers-crossed:
Click to expand...
Click to collapse
And profiles who will make and edit:laugh:?
Hard_Rock83 said:
And profiles who will make and edit:laugh:?
Click to expand...
Click to collapse
I think the four profile, i.e. balance, performance, gaming and battery save mode is defaulted in the app?? The spectrum injector is just some sort of zip that make it compatible with the rom? I'm a noob but i just follow the instruction of the thread here to make the app usable in any rom.
https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
Dev states that we can add any profile we like in this rom with instructions according to rom dev supports, but i just use the default four profiles and didn't make any changes.