Related
It seems that I'm in a pickle here.
I already had swiftdroid installed but then I wanted to re-install it. So I tried but after flashing euro+fast.kdz , I got stuck in boot-loop. I tried doing the steps but I think I might be doing something wrong. Well, to get into fastboot to test if it went through would be holding the "camera" button or is it "home+camera" button during reboot? Thanks. Been at this all day.
Oh, and it appears every time I try to power on and hold the camera button first, it just goes to a black screen. So, by that have I already installed the rom properly even if it gets stuck on the android logo?
and an update as to what's happening:
going into download mode detects my phone on "device and printers" but as soon as I click on "Launch software update" I lose all the icons and KDZ returns a message saying "Phone was not found" I just noticed this now. What should I do?
I already uninstalled all drivers installed on my pc and re-installed them. After doing so, my phone detected a whole bunch of LG devices. Now on Android logo -- That after doing the Euro+fast and now am trying to do the out.kdz. By the way, even if my phone restarted during the "Launch software update" I waited for it to say finish right before I took out the battery and the usb cable.
After param 207 my phone went into boot stage and my pc re-detected the LG stuff. Now my phone is on the LG logo and it's been like it for a minute+.
I am following several steps on doing this procedure.
--Now question is again.. After this step should I be able to launch fastboot via "holding the camera" button? Do I need to do this while the phone is plugged in to the computer?
......
already tried euro then the out then euro using phone cs_emergency. Currently on Android bootloop. So I think I'm kinda back to step 1. Because initially, when I had swiftdroid, I just did euro using phone diag then afterwards, it went to bootloop. Now when I tried to restart my phone then I press and hold of the camera button, phone goes into a black screen. But looking at the "devices and printers" page, it shows "unspecified--android" on the bottom. What should I do then?
So right now, I'm currently on Android logo bootloop and if I reboot then hold the camera button, it goes to a blank black screen. What should I do next? Thanks
Update:
so yeah, after dwelling on the black screen, I tried to open up Mur4ik's old thread looking for the files I downloaded last year. Tried the command prompt and typed this in
fastboot -w
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
After doing so, phone rebooted okay. Right now, phone status seems fine. Some adventure I had. Will try to work on how to upgrade the version on this unit.
Nice work dude I too did all that stuff, its really adventures
Now I came over it and now I'm trying all roms
PRACTICE MAKES PERFECT
Sent from my LG-GT540 using xda premium
I literally just got the 4.3 OTA update. Phone was fully charged... like 98%. I went ahead and let it update. It rebooted, and it got about 75% into updating and then the icon switched to the sideways android with the red caution symbol and said "Error". I let it sit there for awhile hoping it would do something. It didn't, so I held down power to reboot. It rebooted to the same icon, but now says "No command". I did the vol up/power to get into the wipe/reboot options. I went ahead and rebooted. Every single time... I see the Google logo for like a min, then to the sad android logo w/ "No command". Now I can't even get that far, the indicator light flashes red. I've read that indicates a totally drained battery. Not sure how it can go from full charged to fully drained in a matter of minutes. However on the issue of the error and no command, is my device dead? I've never rooted it or used custom roms. I got the N4 for the pure vanilla stock experience, so I never felt rooting was needed. Any advice? Should I just call Google and request replacement?
I would try a few things first before calling Google. Sometimes the battery doesn't show its correct percentage, it's pretty common on my N4 as far as I can tell. Maybe you've just run out of battery. Let it charge for half an hour or so and then try it again.
If you can't boot to system after that, turn off your phone, press and hold volume down and power buttons at the same time for a few seconds until it boots to bootloader. If you can't boot to bootloader after doing this let it charge for more time, an hour or two.
Sometimes, after the battery has run dry completely it is really hard to turn the phone on (I've even seen this behavior on my 7 years old Nokia). One question, does a charging animation shows up when you plug your phone?
Mercado_Negro said:
I would try a few things first before calling Google. Sometimes the battery doesn't show its correct percentage, it's pretty common on my N4 as far as I can tell. Maybe you've just run out of battery. Let it charge for half an hour or so and then try it again.
If you can't boot to system after that, turn off your phone, press and hold volume down and power buttons at the same time for a few seconds until it boots to bootloader. If you can't boot to bootloader after doing this let it charge for more time, an hour or two.
Sometimes, after the battery has run dry completely it is really hard to turn the phone on (I've even seen this behavior on my 7 years old Nokia). One question, does a charging animation shows up when you plug your phone?
Click to expand...
Click to collapse
It's been charging now for a little over an hour. No animation or indication the battery may be drained other than the red indicator light when I try to go to into the boot loader. Still can't do anything. If I power it on, I see Google logo for awhile, then sad Android icon and "no command". If I try to go into bootloader, just red indicator light and black screen. All while plugged in.
I just don't understand how it went from fully charged to drained in minutes. It was plugged in for hours today. In fact I initiated the OTA update only about 20-30 min after taking it off the charger.
Unplug your device, press and hold the power and volume down buttons for a few seconds until it boots to the bootloader. Now plug your phone again and let it charge.
Mercado_Negro said:
Unplug your device, press and hold the power and volume down buttons for a few seconds until it boots to the bootloader. Now plug your phone again and let it charge.
Click to expand...
Click to collapse
Alright, it's now been charging for 3 hours. I did what you just suggested. All that happens is I see a white Google logo for about 10 seconds, then it goes black. I think the device is off at this point. Stupid question I'm sure... I can't dock my phone to my computer to get any of my data at the "no command" screen can I? It needs to be fully booted, right?
Get into recovery, wipe cache, then it "should" boot.
ksilver89 said:
Get into recovery, wipe cache, then it "should" boot.
Click to expand...
Click to collapse
Like I said above, I'm not able to. I hold down power + vol up and it just shows white Google logo then goes black.
Well hmmm. I just did power + vol down for the hell of it, and I have a menu. Selected "recovery mod" and it just went straight to the sad Android icon with "No command".
I'm not sure what to make of all the stuff I see on this menu...
https://dl.dropboxusercontent.com/u/28754710/20130730_100302.jpg
Here is a short video of what I get from that menu when trying to go into recovery...
https://dl.dropboxusercontent.com/u/28754710/20130730_100936.mp4
For the sake of simplicity, learn how to use Fastboot. You should find more than enough information in the General section.
All you need to do is run this command in bootloader mode.
Code:
fastboot format cache
Edit:
Just saw the video, press vol up + power together in the recovery to access the menu.
ksilver89 said:
For the sake of simplicity, learn how to use Fastboot. You should find more than enough information in the General section.
All you need to do is run this command in bootloader mode.
Code:
fastboot format cache
Edit:
Just saw the video, press vol up + power together in the recovery to access the menu.
Click to expand...
Click to collapse
Again... like I said before vol up + power does nothing. I can take a video if you like.
Disregard the above. Got it into recovery. I guess my pushing was off or something. I took the rigid case off and made it easier to press the vol button. Let's see what happens now.
Alright. Got into recovery, did a wipe data/factory reset, still no dice. This time it rebooted several times, Google white logo each time, then finally a sad Android icon with "No command". Guessing next step is to download it and try updating via ADB?... or just say screw it and call Google and initiate a replacement?
Alright, it is screwed. Long guide here: http://forum.xda-developers.com/showthread.php?t=2010312
Short guide:
1. You need basically 3 things, the factory image, fastboot, and nexus 4 drivers
2. Download and setup all of them.
3. Extract the factory image tgz file TWICE until you see a folder.
4. Place "fastboot" into that folder.
5. Unlock your bootloader, shift + right click inside the folder, Open command window here. Run "fastboot oem unlock" and read the agreement (it's screwed anyway), select Yes if agree.
6. Once unlocked, run "flash-all".
7. Go running around your house for 10 mins.
Warning: This operation will wipe everything in your phone, if there's any crucial data, edit flash-all.bat to remove "-w" flag, and remove userdata.img in the occam zip.
Edit:
Or probably you can just get a toolkit...
ksilver89 said:
Alright, it is screwed. Long guide here: http://forum.xda-developers.com/showthread.php?t=2010312
Short guide:
1. You need basically 3 things, the factory image, fastboot, and nexus 4 drivers
2. Download and setup all of them.
3. Extract the factory image tgz file TWICE until you see a folder.
4. Place "fastboot" into that folder.
5. Unlock your bootloader, shift + right click inside the folder, Open command window here. Run "fastboot oem unlock" and read the agreement (it's screwed anyway), select Yes if agree.
6. Once unlocked, run "flash-all".
7. Go running around your house for 10 mins.
Warning: This operation will wipe everything in your phone, if there's any crucial data, edit flash-all.bat to remove "-w" flag, and remove userdata.img in the occam zip.
Edit:
Or probably you can just get a toolkit...
Click to expand...
Click to collapse
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
pixelbat said:
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
Click to expand...
Click to collapse
Yes, what he suggested should get you up and running again (if not, then yes your phone needs a replacement). I saw the video and the image. I'm pretty sure your system was wiped somehow and that's why you can't boot to it anymore. If what he suggested fails I can walk you through the steps to flash each factory image separately.
What would you do if the nexus 4 drivers wont install?
I have similar problem, I got the 4.3 update ota and it crashed half way through and now it gets stuck on the X logo. I was trying to follow a guide (http://forum.xda-developers.com/showthread.php?t=2010312) to install 4.3 back onto the device but failed at the first hurdle, when plugin the phone in it fails on the driver software installation - mtp usb device failed.
Is there any other way to do it?
pixelbat said:
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
Click to expand...
Click to collapse
unplug your phone. reboot into bootloader (vol down + power) but don't plug it in
downloaded the file posted in this topic from the google website.
http://forum.xda-developers.com/showthread.php?p=44088784
once you download it, extract it to a folder
then open up flash_all.bat in notepad, and it will say -w near the end. remove that (leaving it would wipe all of your data) and save the file
then run it, it will say waiting for device. plug your phone in and it will start updating
flipfamous said:
What would you do if the nexus 4 drivers wont install?
I have similar problem, I got the 4.3 update ota and it crashed half way through and now it gets stuck on the X logo. I was trying to follow a guide (http://forum.xda-developers.com/showthread.php?t=2010312) to install 4.3 back onto the device but failed at the first hurdle, when plugin the phone in it fails on the driver software installation - mtp usb device failed.
Is there any other way to do it?
Click to expand...
Click to collapse
Which driver did you try to install? Naked Drivers 0.72? What OS (Win8, Win7, etc)?
Plug your device in, go to control panel, click on Device Manager, scan for hardware changes or select the device with a yellow exclamation mark. Click on "Update driver" and search for the drivers in your PC (where you downloaded them). That should work.
Just Boot from a ubuntu live cd, install fastboot with apt-get and get started
Gesendet von meinem Nexus 4 mit Tapatalk 4 Beta
Hey all, completely new to this forum and my Oneplus Two that I've had for a little over two weeks.
I recently got a OTA update for Oxygen 2.2.0 but I can't seem to install it. Everytime I download it and click the "install" option, the phone reboots (probably to go to recovery) but after a very brief splash screen and a vibration, it vibrates again and displays the standard boot splash screen, boots into the OS and offers me to download the update again.
I've done a little troubleshooting in the past two-three days and from what I understand, the phone doesn't seem to be able to boot into recovery or fastboot. I've enabled the advanced options in the "reboot" menu and when selecting "recovery" the phone reboots and does the same behavior described above. I tried powering off the phone and booting with the volume up button pressed (while pressing power) and the phone boots and displays a "Fastboot Mode" splash screen but it seems to hang there forever until I actually shut it off again and power it back on. Also, I've tried booting it into recovery from ADB, connected to my PC and I get the same behavior: brief splash screen with a vibrate and then the phone seems to reboot again normally.
I haven't tampered with the phone yet, it is brand new out of the box, not rooted and nothing other than simply installing a few games, Nova Launcher, changing the wallpaper and using it as you would normally use your phone.
Anyone has an idea how I could actually get the Recovery functioning on this phone?
Best regards and thanks in advance for any help!
redbay1 said:
Hey all, completely new to this forum and my Oneplus Two that I've had for a little over two weeks.
I recently got a OTA update for Oxygen 2.2.0 but I can't seem to install it. Everytime I download it and click the "install" option, the phone reboots (probably to go to recovery) but after a very brief splash screen and a vibration, it vibrates again and displays the standard boot splash screen, boots into the OS and offers me to download the update again.
I've done a little troubleshooting in the past two-three days and from what I understand, the phone doesn't seem to be able to boot into recovery or fastboot. I've enabled the advanced options in the "reboot" menu and when selecting "recovery" the phone reboots and does the same behavior described above. I tried powering off the phone and booting with the volume up button pressed (while pressing power) and the phone boots and displays a "Fastboot Mode" splash screen but it seems to hang there forever until I actually shut it off again and power it back on. Also, I've tried booting it into recovery from ADB, connected to my PC and I get the same behavior: brief splash screen with a vibrate and then the phone seems to reboot again normally.
I haven't tampered with the phone yet, it is brand new out of the box, not rooted and nothing other than simply installing a few games, Nova Launcher, changing the wallpaper and using it as you would normally use your phone.
Anyone has an idea how I could actually get the Recovery functioning on this phone?
Best regards and thanks in advance for any help!
Click to expand...
Click to collapse
That is the norm for fastboot, it doesn't go past that screen.
It may not make a difference, did you try to boot to recovery via Power+Volume Down buttons?
Greetings Khaos64,
Yes, I've tried booting with Vol-Down+Power but the phone does not start.
With volume-up+power, I get the Fastboot splash screen but the phone does not respond to any input.
I tried selecting "bootloader" from the reboot menu but I get the same thing: Reboots and after a second, the phone reboots again normaly and into OxygenOS.
Is there a way to verify if the bootloader or recovery is corrupt and maybe reflash the stock recovery onto the phone?
Thanks for your input!
You may just want to go straight to oneplus support since everything is stock and only 2 weeks they should be able to get you updated or replace it.
If you'd like to be more hands on... maybe something below can help.
So your phone isn't recognized/no commands acceptred from your computer when booted to fastboot?
Such as unlocking your bootloader and booting into twrp... "fastboot boot yourfilename.img" or maybe flashing it.
Make sure OEM unlocking is selected in Developer options.
If you can't do that then this may not work but is worth a shot.
http://forum.xda-developers.com/showpost.php?p=62973446&postcount=2
These may also be something to look into:
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449
I did try to contact Oneplus for support but I am not the one who purchased the phone. Long story short, it was a gift from my girlfriend that she bought off of someone. The phone was new in box and was a warranty replacement. I would have to contact the seller and go trough him for support unfortunately.
Thanks for the different suggestions!, I will fiddle around with it this afternoon while the kids are having their mid-day nap and I'll get back with the results
Thanks again for the help, it's greatly appreciated!
Hello,
I eventually started fiddling around with fasboot and tried unlocking the bootloader. This sent the phone into a bootloop where it would try to boot into recovery and reboot right away.
I found an article on how to restore the phone to Oxygen 2.1.1. It would wipe user data but I did it anyway and it actually did restore the phone and now I have a worling recovery.
Here is a link to the guide I used:
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Thanks again for the help in solving my issue
Congratulations hope you enjoy the phone
Sent from my ONE A2005 using Tapatalk
redbay1 said:
Hello,
I eventually started fiddling around with fasboot and tried unlocking the bootloader. This sent the phone into a bootloop where it would try to boot into recovery and reboot right away.
I found an article on how to restore the phone to Oxygen 2.1.1. It would wipe user data but I did it anyway and it actually did restore the phone and now I have a worling recovery.
Here is a link to the guide I used:
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Thanks again for the help in solving my issue
Click to expand...
Click to collapse
Glad one was able to help you do it. :good:
redbay1 said:
Hello,
I eventually started fiddling around with fasboot and tried unlocking the bootloader. This sent the phone into a bootloop where it would try to boot into recovery and reboot right away.
I found an article on how to restore the phone to Oxygen 2.1.1. It would wipe user data but I did it anyway and it actually did restore the phone and now I have a worling recovery.
Here is a link to the guide I used:
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Thanks again for the help in solving my issue
Click to expand...
Click to collapse
HI there,
I am having the exact same issue with my oneplus 2. Unfortunately i know almost nothing regarding these android thingy. I know it has been almost 2 years, would you mind guide me through the steps? I would appreciate it so much.
Thanks.
I got the new T-mobile LG V20 I went thru the the whole proccess step by step of how to root and install twrp on my device the last step of having to encrypt it failed now its stuck in a bootloop. screen pops up saying encryption is unsuccessful,then resets to twrp and flashes back to the previous screen. over and over. Please help
jessiemougeot said:
I got the new T-mobile LG V20 I went thru the the whole proccess step by step of how to root and install twrp on my device the last step of having to encrypt it failed now its stuck in a bootloop. screen pops up saying encryption is unsuccessful,then resets to twrp and flashes back to the previous screen. over and over. Please help
Click to expand...
Click to collapse
same problem here and cant find solution ...
I had the same issue. when you press to reset button when the phone boots it should reboot and for a short time go to recovery and try to write some commands, right? if it does like mine did then what i did to fix it was boot up the phone and wait for the page saying encryption unsuccesful to popup and on the computer have the adb reboot recovery ready to go so when you press the reset button and the recovery menu pops up press enter on the computer before it goes away and it should send you to the regular recovery menu. from there you should go back to wipe and press the format data button where you have to type yes to erase everything. let me know how it went.
you will have to reflash the supersu but it should now be working like it should
Flash the latest su and your fine.
ErickF said:
I had the same issue. when you press to reset button when the phone boots it should reboot and for a short time go to recovery and try to write some commands, right? if it does like mine did then what i did to fix it was boot up the phone and wait for the page saying encryption unsuccesful to popup and on the computer have the adb reboot recovery ready to go so when you press the reset button and the recovery menu pops up press enter on the computer before it goes away and it should send you to the regular recovery menu. from there you should go back to wipe and press the format data button where you have to type yes to erase everything. let me know how it went.
you will have to reflash the supersu but it should now be working like it should
Click to expand...
Click to collapse
did that but my adb says no devices or emulators?
jo4mvp24 said:
did that but my adb says no devices or emulators?
Click to expand...
Click to collapse
Make sure your on charging mode and you have adb debug enabled
send the adb reboot recovery command as soon as the twrp connects to the computer. as soon as you hear it connect to the computer it should work if your drivers are working.
charlieb620 said:
Make sure your on charging mode and you have adb debug enabled
Click to expand...
Click to collapse
how do i do that when phone stuck on encryption unsuccessful screen?
exactly my issue
ErickF said:
I had the same issue. when you press to reset button when the phone boots it should reboot and for a short time go to recovery and try to write some commands, right? if it does like mine did then what i did to fix it was boot up the phone and wait for the page saying encryption unsuccesful to popup and on the computer have the adb reboot recovery ready to go so when you press the reset button and the recovery menu pops up press enter on the computer before it goes away and it should send you to the regular recovery menu. from there you should go back to wipe and press the format data button where you have to type yes to erase everything. let me know how it went.
you will have to reflash the supersu but it should now be working like it should
Click to expand...
Click to collapse
Ya that is exactly what happend give me a few minutes ill try it out and let you know....THANKS...THANKS....THANKS...It worked, i got it on my first try. Your right ...you have to be quick. thank u so much you saved me along night of downloads! :victory:
This method WORKS!!!! Same situation happened to me. THANK YOU 500x!! you saved my brick!
ErickF said:
I had the same issue. when you press to reset button when the phone boots it should reboot and for a short time go to recovery and try to write some commands, right? if it does like mine did then what i did to fix it was boot up the phone and wait for the page saying encryption unsuccesful to popup and on the computer have the adb reboot recovery ready to go so when you press the reset button and the recovery menu pops up press enter on the computer before it goes away and it should send you to the regular recovery menu. from there you should go back to wipe and press the format data button where you have to type yes to erase everything. let me know how it went.
you will have to reflash the supersu but it should now be working like it should
Click to expand...
Click to collapse
This works 100% thank you so much. Just have patience as it has to be at the right time....WORKS WORKS WORKS!!!!!
Help
Can someone explain the commands and how to do this please thanks in advance
I did the data reset and im still in the bootloop. Worst thing is now i cant seem to get into recovery
epr2175 said:
I did the data reset and im still in the bootloop. Worst thing is now i cant seem to get into recovery
Click to expand...
Click to collapse
What screen are you stuck in? Do you have adb up and running?
Same as before Encryption unsuccessful. I was able to do the trick, got into two and wiped data. Then rebooted to system and it went right back to that screen. I've tried 100 times or so to get back into twrp with no luck. I hear the computer recognize the device when it goes into twrp for 2 seconds after you click reset. Not sure if that means add is up and running or not.
jessiemougeot said:
Ya that is exactly what happend give me a few minutes ill try it out and let you know....THANKS...THANKS....THANKS...It worked, i got it on my first try. Your right ...you have to be quick. thank u so much you saved me along night of downloads! :victory:
Click to expand...
Click to collapse
Well it booted then got stuck on the lg boot screen again. Adb does not recognize my device, can only boot into Fastboot. Fastboot does see my device, tried lgup, lg bridge, and lg update none see my device, tried relocking bootloader after oem lock bootloader rebooted said my device was corrupted and shut itself off went back into Fastboot unlocked bootloader again and back to the same lg screen help?
This did not work for me, my phone reboots back into TWRP whenever I install a system image it still gives me the encryption message.
---------- Post added at 02:06 PM ---------- Previous post was at 01:11 PM ----------
crazyc78 said:
This did not work for me, my phone reboots back into TWRP whenever I install a system image it still gives me the encryption message.
Click to expand...
Click to collapse
Now I don't even have the encryption screen it just reboots back to TWRP very frustrating!!
fixed!
jessiemougeot said:
I got the new T-mobile LG V20 I went thru the the whole process step by step of how to root and install twrp on my device the last step of having to encrypt it failed now its stuck in a bootloop. screen pops up saying encryption is unsuccessful,then resets to twrp and flashes back to the previous screen. over and over. Please help
Click to expand...
Click to collapse
Had the same problem and could not for the life of me do the adb thing. Someone here stated something that I thought I'd try: Press volume down while plugging in the phone to get into fastboot. In a command window issue "fastboot oem lock" (this will relock the boot) > Let the phone reset and you'll see the "Phone corrupt message" > Plug the phone in again to do a fastboot and issue "fastboot oem unlock" > Take the battery out let the phone boot and BAM-E WHAM success!
btw. I followed the steps here to do the whole root thing with Android . how (google "how to root the v20")
I think the "data" wipe did this and according to this site it's not a necessary step so skip it.
This option works!
SyHusky said:
Had the same problem and could not for the life of me do the adb thing. Someone here stated something that I thought I'd try: Press volume down while plugging in the phone to get into fastboot. In a command window issue "fastboot oem lock" (this will relock the boot) > Let the phone reset and you'll see the "Phone corrupt message" > Plug the phone in again to do a fastboot and issue "fastboot oem unlock" > Take the battery out let the phone boot and BAM-E WHAM success!
btw. I followed the steps here to do the whole root thing with Android . how (google "how to root the v20")
I think the "data" wipe did this and according to this site it's not a necessary step so skip it.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I go my T-mobile LG V20 H918 on 11/23/16 and sure enough, I followed the same thread as listed above where it added the step of "data wipe" crap. I was caught in a bootloop, where phone kept bootlooping back to the "reset to factory." The other method of entering the adb command at the right time was more frustrating than anything. (I never got it to work). I spent all day yesterday trying to get this phone working. I re-read (x30) the above thread and on the first attempt it worked. I did not get the "Phone Corrupt Message," but I went ahead and entered the "fastboot oem unlock" and the F#$king phone finally reboot to the setup initial screen. It wiped everything, but having a phone working rather than a nice $800 paperweight, I wanted to kiss SkyHusky for sharing this simple method. YOU ARE AWESOME!!!!
By the way, since I am a glutton for punishment, I followed the steps to root again. After flashing the SuperUser, I rebooted to System. I was at the initial setup screen. My phone is rooted, has TWRP, and SuperUser! As soon as I got the phone working, I went back to TWRP and made a BACKUP!!!!
It is amazing that every time I f-up a phone, I can always come to XDA and get a solution. THANKS GUYS!
jay_h_jacob said:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I go my T-mobile LG V20 H918 on 11/23/16 and sure enough, I followed the same thread as listed above where it added the step of "data wipe" crap. I was caught in a bootloop, where phone kept bootlooping back to the "reset to factory." The other method of entering the adb command at the right time was more frustrating than anything. (I never got it to work). I spent all day yesterday trying to get this phone working. I re-read (x30) the above thread and on the first attempt it worked. I did not get the "Phone Corrupt Message," but I went ahead and entered the "fastboot oem unlock" and the F#$king phone finally reboot to the setup initial screen. It wiped everything, but having a phone working rather than a nice $800 paperweight, I wanted to kiss SkyHusky for sharing this simple method. YOU ARE AWESOME!!!!
By the way, since I am a glutton for punishment, I followed the steps to root again. After flashing the SuperUser, I rebooted to System. I was at the initial setup screen. My phone is rooted, has TWRP, and SuperUser! As soon as I got the phone working, I went back to TWRP and made a BACKUP!!!!
It is amazing that every time I f-up a phone, I can always come to XDA and get a solution. THANKS GUYS!
Click to expand...
Click to collapse
No problem!! Also I forgot to add I only rooted afterward and didn't try to install a ROM or anything. I would think you risk danger with some ROMs without that decryption thing turned off. So maybe in the short future there will be better fixes.
Hi, I don't have enough posts to ask this in the actual DirtySanta thread.
I meticulously followed the steps in the DirtySanta thread making sure I had all the correct software, all the pre-requisites, all files in my ADB folder (except SuperSU zip, which is on the SD card on the phone). Suffice it to say that I did all the steps exactly as written in the guide. I was prompted when to run the next batch files each time, etc. Entered the proper commands in the terminal utility, and so on. Everything as written.
After clicking on step3.bat, the phone immediately rebooted to a Fastboot screen. In the meantime, the batch files disappeared off my desktop.
So, for the past 15 minutes or so the phone has been sitting on Fastboot and vibrating away.
Here's what I see in the small Fastboot screen:
Fastboot Mode (in red)
stuff like Product_name, Variant, HW_Version, etc. up until it says LOCK_STATE.
Ok, after all of that basic stuff, it says:
[1090]
[1140] Fastboot mode started
[1670] fastboot: processing commands
[17600] usb_read() transaction failed; txn_status= -1
[17650] usb_read: DONE: ERROR len=64
[1700] fastboot: oops!
[17750] fastboot: processing commands
And that's where it sits, doing seemingly nothing and vibrating away.
Can anyone assist?
Try a different usb port. then rerun step 3.
me2151 said:
Try a different usb port. then rerun step 3.
Click to expand...
Click to collapse
Will do...was just thinking of doing that since it said "usb read error". Will report back.
Heyitsrick said:
Will do...was just thinking of doing that since it said "usb read error". Will report back.
Click to expand...
Click to collapse
First off, a big thanks for helping me.
Update: OK, changing the USB port worked I re-ran Step3.bat. I have made it through getting to TWRP, and have done these steps:
Verizon(VS995) and ATT(H910):
4.1) Flash SuperSU.zip
4.2) Go back to Main-menu > Wipe > [Format Data] > Type ?Yes?
4.3) Go back to Wipe > Advanced > Check Dalvik, Data and Cache > Slide to wipe
4.4) Go back to Main-menu > Reboot > System
So, with that all complete, it's rebooted to a Verizon screen (horizontal progress dots) and a low buzzing.
I did try what you mentioned in the guide to get over the wait time by pulling the battery, reinserting with vol down key pressed and re-attaching the USB to flash boot2.img via fastboot, but it didn't get back to fastboot after the battery/voldown/usb. It went back to the same Verizon screen after the obligatory "Corrupt" screen came on.
Can I assume that I can wait this out for 20 minutes, or did I miss something in how to interrupt this waiting period for first setup? I do want to (and know I have to) flash boot2.img.
EDIT: wasn't holding vol key down long enough to get into fastboot. Doh. Just flashed boot2.img and rebooted.
Looks like I made it! It's at the "Prepare your Phone Screen". Fingers crossed.
Heyitsrick said:
Looks like I made it! It's at the "Prepare your Phone Screen". Fingers crossed.
Click to expand...
Click to collapse
Are you still stuck?
I ran into this EXACT same issue on my brand new Verizon v20 on step 3 (both 13a and 12a firmware gave me this issue) and I had to figure out my own solution, even tho I read that 'dirty santa root' thread a thousand times front to back.... (no disrepsect to the OP/Devs of that thread btw!)
Anyways, below, is the link to my solution on my brand new Verizon v20, in case you're still stuck. I've actually reflashed (via LGUP) back to stock a couple times, then re-root/unlock to test out 13a and 12a firmwares to benchmark various battery life/performance markers for a tech site I write for. Ultimately, I have to go through the exact same steps everytime for my Verizon v20.
I know I wasn't too specific in my post below... but if you have any questions, don't hesitate to ask
https://forum.xda-developers.com/showpost.php?p=71371141&postcount=24
NegativeX said:
Are you still stuck?
I ran into this EXACT same issue on my brand new Verizon v20 on step 3 (both 13a and 12a firmware gave me this issue) and I had to figure out my own solution, even tho I read that 'dirty santa root' thread a thousand times front to back.... (no disrepsect to the OP/Devs of that thread btw!)
Anyways, below, is the link to my solution on my brand new Verizon v20, in case you're still stuck. I've actually reflashed (via LGUP) back to stock a couple times, then re-root/unlock to test out 13a and 12a firmwares to benchmark various battery life/performance markers for a tech site I write for. Ultimately, I have to go through the exact same steps everytime for my Verizon v20.
I know I wasn't too specific in my post below... but if you have any questions, don't hesitate to ask
https://forum.xda-developers.com/showpost.php?p=71371141&postcount=24
Click to expand...
Click to collapse
I read your "fix" post to see exactly where you got stuck, as I got stuck first due to the USB port not being able to work correctly and had to switch USB ports on my pc before I could re-run step3.bat.
I see now that you're talking about the long Verizon logo screen with progress dots issue after rebooting post-running step3.bat that I ran into, as well.
OK, what worked for me was much easier in the end than what you did. After step3.bat and the reboot, it would just sit there on the Verizon logo with the progress dots, as you know. There is a notation on the first page of the DirtySanta thread that in order to get around this, unplug the USB cable and remove the battery.
This is the actual note from the DirtySanta thread for Verizon users with the long Logo screen issue:
*****VERIZON USERS******
It has come to my attention that some users have encountered abnormally long first boot time(over 20 minutes before first time setup)
To resolve this issue:
Boot into bootloader by pulling the battery and reinserting it and holding VOL- and phugging in the phone. then typing:
Code:
fastboot flash boot boot2.img
fastboot reboot
**************
Click to expand...
Click to collapse
Once I removed the battery and usb cable, the phone was completely off, of course. Then, I just needed to get it back into "fastboot" on the phone, itself, in order to flash boot2.img via ADB on the PC. When the phone was on the never-ending Logo screen with progress dots, I found that ADB could see the phone ok via the adb devices command, but if I tried to flash anything at that point, it would just say something like "pending", as if it were waiting for the device to be free to flash. So, that wasn't going to work, obviously. I needed the phone to be in the flashboot screen, not the logo screen. I did a ctrl-c to cancel out of the adb flash command, and then set out to pull the battery/usb cable and then reconnect the battery, and while holding the Vol Down button reinserting the USB cable.
The first time I tried this, it booted up fine, but it went right back to the Logo screen. Doh! I figured perhaps I wasn't waiting long enough with the Volume Down button so I tried it again. What happened the first time when it rebooted to the Logo screen is I released the Volume Down button the moment the phone started to turn on (you feel the vibration). That's when it booted back to the Logo. This second time, I removed the battery again while it was on that never-ending Logo screen to power it off and disconnected the USB cable again. I put the battery back in, then with the Volume Down button pressed down, I reconnected the USB cable. The difference this time is that I did not release the Volume Down button this time UNTIL I saw it was in the Fastboot screen and not the Verizon Logo.
So, at this point the phone was on the Fastboot screen and I saw it was it was ready to go, so I initiated the ADB command to flash boot2.img. It went through its paces and once it got back to the ADB command prompt, I did an ADB Fastboot Reboot command. It rebooted, first with the obligatory corrupt warning, then the Verizon Logo and progress dots, but then after a short while I got the "Hello" screen in red and I knew it was actually going to finish. Whew! Relief! At that point I was eventually at the phone's setup screen for a new user, and I finished setting up the phone, reinstalling apps, etc.
One caveat in this: I don't know why, but even though I had gone through all the steps in "4" section of the instructions, when I checked Root, I wasn't rooted! Huh?
In other words, I had already gone through this part:
Verizon(VS995) and ATT(H910):
4.1) Flash SuperSU.zip
4.2) Go back to Main-menu > Wipe > [Format Data] > Type ?Yes?
4.3) Go back to Wipe > Advanced > Check Dalvik, Data and Cache > Slide to wipe
4.4) Go back to Main-menu > Reboot > System
Click to expand...
Click to collapse
After setting up the phone and reinstalling my apps, I opened up the SuperSU app, and it said there was no executable installed. In other words, it didn't recognize that I had flashed it in step 4.1. Perhaps flashing boot2.img overwrote that? Not sure, but at this point, I set about to figure out how to boot into TWRP Recovery on the phone (not fastboot) to flash it from there (again).
It took me a while to find the instructions on how to boot into TWRP, lol, and it's a little unnerving that before it boots to TWRPyou are warned that all your data is going to be overwritten before you can boot to it, but it did get me back into TWRP. Once in TWRP, I re-flashed Supersu-blahblah.zip and rebooted via the system reboot. (did not wipe any caches again, though).
After reboot, I checked root again, and this time after a bit SuperSu brought up the permissions screen for the Root app that I had to allow, and it brought back a successful Root message.
I then set about to do what I really wanted to do with root - bypass the Verizon entitlement check for hotspot usage, and got that working fine.
All in all, I have to say this was the diciest rooting I've ever had to go through. I guess that's because of Nougat and that there can't be (at least not yet) a "one-click" root. But man, was I worried when I was at the point where I first posted in this thread. I bought this phone as a "new-resale" (never used) phone from Swappa.com for $450, so if I bricked it, I was out of luck. But it seems to be ok now.
Heyitsrick said:
I read your "fix" post to see exactly where you got stuck, as I got stuck first due to the USB port not being able to work correctly and had to switch USB ports on my pc before I could re-run step3.bat.
I see now that you're talking about the long Verizon logo screen with progress dots issue after rebooting post-running step3.bat that I ran into, as well.
OK, what worked for me was much easier in the end than what you did. After step3.bat and the reboot, it would just sit there on the Verizon logo with the progress dots, as you know. There is a notation on the first page of the DirtySanta thread that in order to get around this, unplug the USB cable and remove the battery.
This is the actual note from the DirtySanta thread for Verizon users with the long Logo screen issue:
Once I removed the battery and usb cable, the phone was completely off, of course. Then, I just needed to get it back into "fastboot" on the phone, itself, in order to flash boot2.img via ADB on the PC. When the phone was on the never-ending Logo screen with progress dots, I found that ADB could see the phone ok via the adb devices command, but if I tried to flash anything at that point, it would just say something like "pending", as if it were waiting for the device to be free to flash. So, that wasn't going to work, obviously. I needed the phone to be in the flashboot screen, not the logo screen. I did a ctrl-c to cancel out of the adb flash command, and then set out to pull the battery/usb cable and then reconnect the battery, and while holding the Vol Down button reinserting the USB cable.
Click to expand...
Click to collapse
I saw that 'fix' and it never worked for me at the point in the rooting process I was in... sadly. You have to be able to even get to TWRP, do the SU install then format/wipe, then you can flash the boot2.img to speed up the booting process. In my case, I was never able to even get to TWRP. Trying to flash boot2.img before being able to get to TWRP, would soft brick my phone with the 'password' screen on bootup and I was never able to get around it, requiring me to LGUP back to stock and try again. Luckily I was able to still figure it out.
As you said, definitely the 'diceist' rooting process I've ever encountered... and I've been rooting phones since the original Motorola Droid 1/Milestone phone. Good times tho! Haha
NegativeX said:
I saw that 'fix' and it never worked for me at the point in the rooting process I was in... sadly. You have to be able to even get to TWRP, do the SU install then format/wipe, then you can flash the boot2.img to speed up the booting process. In my case, I was never able to even get to TWRP. Trying to flash boot2.img before being able to get to TWRP, would soft brick my phone with the 'password' screen on bootup and I was never able to get around it, requiring me to LGUP back to stock and try again. Luckily I was able to still figure it out.
As you said, definitely the 'diceist' rooting process I've ever encountered... and I've been rooting phones since the original Motorola Droid 1/Milestone phone. Good times tho! Haha
Click to expand...
Click to collapse
Late response - sorry.
There must be something we each did differently, as we both have the same phones, same carrier, same software revision (13a). I was able to get to TWRP via the button method on the phone. Didn't use ADB for that. I was presented with an ominous white screen about all files will be wiped/deleted, but when accepting that (and hoping for the best, lol), it just went to TWRP. So, again...something or some step(s) must be done differently to get to that point on your end from what I did.
I'm guessing you're through with doing the flashing on this thing, so this is all moot now.
Hey guys i actually was having the same issues as you were now however after the SU install the wipe etc i reboot to TWRP no matter what i do even when i restart through bootloader or take the battery off it keeps booting to the same place instead to the verizon wizard help please
kratos380 said:
Hey guys i actually was having the same issues as you were now however after the SU install the wipe etc i reboot to TWRP no matter what i do even when i restart through bootloader or take the battery off it keeps booting to the same place instead to the verizon wizard help please
Click to expand...
Click to collapse
Called a twrp loop. Easy fix. Been posted a lot. Look around for it
me2151 said:
Called a twrp loop. Easy fix. Been posted a lot. Look around for it
Click to expand...
Click to collapse
I have been looking for 2 days haha literally have like 30 tabs open shifting through i dont know what to do next, i backed up wiped my cache data etc installed SU which had no problems wiped again/ rebooted system and back to twrp, i read that you might need to flash a system.img but i dont know where to find one, would appreciate the help kind sir
kratos380 said:
I have been looking for 2 days haha literally have like 30 tabs open shifting through i dont know what to do next, i backed up wiped my cache data etc installed SU which had no problems wiped again/ rebooted system and back to twrp, i read that you might need to flash a system.img but i dont know where to find one, would appreciate the help kind sir
Click to expand...
Click to collapse
Look at team digitals ROM thread. Stockish one. Look at post 3. If you still can't find it I'll quote it directly later. I'm busy right now
me2151 said:
Look at team digitals ROM thread. Stockish one. Look at post 3. If you still can't find it I'll quote it directly later. I'm busy right now
Click to expand...
Click to collapse
Couldnt find it sorry im new to this forum please link it when you are free thanks again for the help much appreciated
kratos380 said:
Couldnt find it sorry im new to this forum please link it when you are free thanks again for the help much appreciated
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=70393155&postcount=3
Sorry for the constant posts but i followed the steps on that thread, deleted the misc/fota files and it stopped it going to twrp and booted to the lg logo with the black screen, i waited there for about 2-3 hours to no avail rebooted into bootloader tried the fastboot img 2 and the same thing happened it was just stuck at the lg logo now when it boots to the fastboot screen however adb doesnt recognize the device anymore but fastboot does. Is it time to kdz and start over ?